| Message ID | 20200513071710.5651-3-frank.wang@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Rockchip RK3399 USB3.0 Host support | expand |
On 2020/5/13 下午3:17, Frank Wang wrote: > RK3399 Type-C PHY is required that must hold whole USB3.0 OTG controller > in resetting to hold pipe power state in P2 before initializing the PHY. > This commit fixed it and added device compatible for rockchip platform. > > Signed-off-by: Frank Wang <frank.wang@rock-chips.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > drivers/usb/dwc3/dwc3-generic.c | 33 +++++++++++++++++++++++++++------ > 1 file changed, 27 insertions(+), 6 deletions(-) > > diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c > index eabd53a36d..421e0be135 100644 > --- a/drivers/usb/dwc3/dwc3-generic.c > +++ b/drivers/usb/dwc3/dwc3-generic.c > @@ -24,6 +24,12 @@ > #include <clk.h> > #include <usb/xhci.h> > > +struct dwc3_glue_data { > + struct clk_bulk clks; > + struct reset_ctl_bulk resets; > + fdt_addr_t regs; > +}; > + > struct dwc3_generic_plat { > fdt_addr_t base; > u32 maximum_speed; > @@ -47,6 +53,7 @@ static int dwc3_generic_probe(struct udevice *dev, > int rc; > struct dwc3_generic_plat *plat = dev_get_platdata(dev); > struct dwc3 *dwc3 = &priv->dwc3; > + struct dwc3_glue_data *glue = dev_get_platdata(dev->parent); > > dwc3->dev = dev; > dwc3->maximum_speed = plat->maximum_speed; > @@ -55,10 +62,22 @@ static int dwc3_generic_probe(struct udevice *dev, > dwc3_of_parse(dwc3); > #endif > > + /* > + * It must hold whole USB3.0 OTG controller in resetting to hold pipe > + * power state in P2 before initializing TypeC PHY on RK3399 platform. > + */ > + if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3")) { > + reset_assert_bulk(&glue->resets); > + udelay(1); > + } > + > rc = dwc3_setup_phy(dev, &priv->phys); > if (rc) > return rc; > > + if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3")) > + reset_deassert_bulk(&glue->resets); > + > priv->base = map_physmem(plat->base, DWC3_OTG_REGS_END, MAP_NOCACHE); > dwc3->regs = priv->base + DWC3_GLOBALS_REGS_START; > > @@ -186,12 +205,6 @@ U_BOOT_DRIVER(dwc3_generic_host) = { > }; > #endif > > -struct dwc3_glue_data { > - struct clk_bulk clks; > - struct reset_ctl_bulk resets; > - fdt_addr_t regs; > -}; > - > struct dwc3_glue_ops { > void (*select_dr_mode)(struct udevice *dev, int index, > enum usb_dr_mode mode); > @@ -394,6 +407,12 @@ static int dwc3_glue_probe(struct udevice *dev) > if (ret) > return ret; > > + if (glue->resets.count == 0) { > + ret = dwc3_glue_reset_init(child, glue); > + if (ret) > + return ret; > + } > + > while (child) { > enum usb_dr_mode dr_mode; > > @@ -424,6 +443,8 @@ static const struct udevice_id dwc3_glue_ids[] = { > { .compatible = "ti,dwc3", .data = (ulong)&ti_ops }, > { .compatible = "ti,am437x-dwc3", .data = (ulong)&ti_ops }, > { .compatible = "ti,am654-dwc3" }, > + { .compatible = "rockchip,rk3328-dwc3" }, > + { .compatible = "rockchip,rk3399-dwc3" }, > { } > }; >
diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c index eabd53a36d..421e0be135 100644 --- a/drivers/usb/dwc3/dwc3-generic.c +++ b/drivers/usb/dwc3/dwc3-generic.c @@ -24,6 +24,12 @@ #include <clk.h> #include <usb/xhci.h> +struct dwc3_glue_data { + struct clk_bulk clks; + struct reset_ctl_bulk resets; + fdt_addr_t regs; +}; + struct dwc3_generic_plat { fdt_addr_t base; u32 maximum_speed; @@ -47,6 +53,7 @@ static int dwc3_generic_probe(struct udevice *dev, int rc; struct dwc3_generic_plat *plat = dev_get_platdata(dev); struct dwc3 *dwc3 = &priv->dwc3; + struct dwc3_glue_data *glue = dev_get_platdata(dev->parent); dwc3->dev = dev; dwc3->maximum_speed = plat->maximum_speed; @@ -55,10 +62,22 @@ static int dwc3_generic_probe(struct udevice *dev, dwc3_of_parse(dwc3); #endif + /* + * It must hold whole USB3.0 OTG controller in resetting to hold pipe + * power state in P2 before initializing TypeC PHY on RK3399 platform. + */ + if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3")) { + reset_assert_bulk(&glue->resets); + udelay(1); + } + rc = dwc3_setup_phy(dev, &priv->phys); if (rc) return rc; + if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3")) + reset_deassert_bulk(&glue->resets); + priv->base = map_physmem(plat->base, DWC3_OTG_REGS_END, MAP_NOCACHE); dwc3->regs = priv->base + DWC3_GLOBALS_REGS_START; @@ -186,12 +205,6 @@ U_BOOT_DRIVER(dwc3_generic_host) = { }; #endif -struct dwc3_glue_data { - struct clk_bulk clks; - struct reset_ctl_bulk resets; - fdt_addr_t regs; -}; - struct dwc3_glue_ops { void (*select_dr_mode)(struct udevice *dev, int index, enum usb_dr_mode mode); @@ -394,6 +407,12 @@ static int dwc3_glue_probe(struct udevice *dev) if (ret) return ret; + if (glue->resets.count == 0) { + ret = dwc3_glue_reset_init(child, glue); + if (ret) + return ret; + } + while (child) { enum usb_dr_mode dr_mode; @@ -424,6 +443,8 @@ static const struct udevice_id dwc3_glue_ids[] = { { .compatible = "ti,dwc3", .data = (ulong)&ti_ops }, { .compatible = "ti,am437x-dwc3", .data = (ulong)&ti_ops }, { .compatible = "ti,am654-dwc3" }, + { .compatible = "rockchip,rk3328-dwc3" }, + { .compatible = "rockchip,rk3399-dwc3" }, { } };