diff mbox series

ARM: dts: at91: Configure SCL gpio of i2c2 node as open drain

Message ID 20200515153239.323944-1-codrin.ciubotariu@microchip.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: at91: Configure SCL gpio of i2c2 node as open drain | expand

Commit Message

Codrin Ciubotariu May 15, 2020, 3:32 p.m. UTC
The SCL gpio pin of i2c2 node used for recovery needs to be configured as
open drain.

Fixes: 455fec938bbb ("ARM: dts: at91: sama5d2: add i2c gpio pinctrl")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
 arch/arm/boot/dts/at91-sama5d2_xplained.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Alexandre Belloni May 15, 2020, 3:39 p.m. UTC | #1
On 15/05/2020 18:32:39+0300, Codrin Ciubotariu wrote:
> The SCL gpio pin of i2c2 node used for recovery needs to be configured as
> open drain.
> 
> Fixes: 455fec938bbb ("ARM: dts: at91: sama5d2: add i2c gpio pinctrl")
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
> ---
>  arch/arm/boot/dts/at91-sama5d2_xplained.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Squashed in the previous one, thanks.

> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index 5846720fc9dc..851b8587068b 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -344,7 +344,7 @@ i2c2: i2c@600 {
>  					pinctrl-0 = <&pinctrl_flx0_default>;
>  					pinctrl-1 = <&pinctrl_i2c2_gpio>;
>  					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
> -					scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>;
> +					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>  					i2c-sda-hold-time-ns = <350>;
>  					i2c-analog-filter;
>  					i2c-digital-filter;
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 5846720fc9dc..851b8587068b 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -344,7 +344,7 @@  i2c2: i2c@600 {
 					pinctrl-0 = <&pinctrl_flx0_default>;
 					pinctrl-1 = <&pinctrl_i2c2_gpio>;
 					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
-					scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 					i2c-sda-hold-time-ns = <350>;
 					i2c-analog-filter;
 					i2c-digital-filter;