| Message ID | 20200519085143.1376-1-geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: PL061: Introduce N_GPIOS | expand |
On 5/19/20 10:51 AM, Geert Uytterhoeven wrote: > Add a definition for the number of GPIO lines controlled by a PL061 > instance, and use it instead of the hardcoded magic value 8. > > Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Thanks for following up. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > --- > hw/gpio/pl061.c | 12 +++++++----- > 1 file changed, 7 insertions(+), 5 deletions(-) > > diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c > index 2a828260bdb0b946..6d3c36bc16cf9e0d 100644 > --- a/hw/gpio/pl061.c > +++ b/hw/gpio/pl061.c > @@ -36,6 +36,8 @@ static const uint8_t pl061_id_luminary[12] = > #define TYPE_PL061 "pl061" > #define PL061(obj) OBJECT_CHECK(PL061State, (obj), TYPE_PL061) > > +#define N_GPIOS 8 > + > typedef struct PL061State { > SysBusDevice parent_obj; > > @@ -62,7 +64,7 @@ typedef struct PL061State { > uint32_t cr; > uint32_t amsel; > qemu_irq irq; > - qemu_irq out[8]; > + qemu_irq out[N_GPIOS]; > const unsigned char *id; > uint32_t rsvd_start; /* reserved area: [rsvd_start, 0xfcc] */ > } PL061State; > @@ -112,7 +114,7 @@ static void pl061_update(PL061State *s) > changed = s->old_out_data ^ out; > if (changed) { > s->old_out_data = out; > - for (i = 0; i < 8; i++) { > + for (i = 0; i < N_GPIOS; i++) { > mask = 1 << i; > if (changed & mask) { > DPRINTF("Set output %d = %d\n", i, (out & mask) != 0); > @@ -125,7 +127,7 @@ static void pl061_update(PL061State *s) > changed = (s->old_in_data ^ s->data) & ~s->dir; > if (changed) { > s->old_in_data = s->data; > - for (i = 0; i < 8; i++) { > + for (i = 0; i < N_GPIOS; i++) { > mask = 1 << i; > if (changed & mask) { > DPRINTF("Changed input %d = %d\n", i, (s->data & mask) != 0); > @@ -364,8 +366,8 @@ static void pl061_init(Object *obj) > memory_region_init_io(&s->iomem, obj, &pl061_ops, s, "pl061", 0x1000); > sysbus_init_mmio(sbd, &s->iomem); > sysbus_init_irq(sbd, &s->irq); > - qdev_init_gpio_in(dev, pl061_set_irq, 8); > - qdev_init_gpio_out(dev, s->out, 8); > + qdev_init_gpio_in(dev, pl061_set_irq, N_GPIOS); > + qdev_init_gpio_out(dev, s->out, N_GPIOS); > } > > static void pl061_class_init(ObjectClass *klass, void *data) >
On Tue, 19 May 2020 at 09:51, Geert Uytterhoeven <geert+renesas@glider.be> wrote: > > Add a definition for the number of GPIO lines controlled by a PL061 > instance, and use it instead of the hardcoded magic value 8. > > Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > hw/gpio/pl061.c | 12 +++++++----- > 1 file changed, 7 insertions(+), 5 deletions(-) > Applied to target-arm.next, thanks. -- PMM
diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index 2a828260bdb0b946..6d3c36bc16cf9e0d 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -36,6 +36,8 @@ static const uint8_t pl061_id_luminary[12] = #define TYPE_PL061 "pl061" #define PL061(obj) OBJECT_CHECK(PL061State, (obj), TYPE_PL061) +#define N_GPIOS 8 + typedef struct PL061State { SysBusDevice parent_obj; @@ -62,7 +64,7 @@ typedef struct PL061State { uint32_t cr; uint32_t amsel; qemu_irq irq; - qemu_irq out[8]; + qemu_irq out[N_GPIOS]; const unsigned char *id; uint32_t rsvd_start; /* reserved area: [rsvd_start, 0xfcc] */ } PL061State; @@ -112,7 +114,7 @@ static void pl061_update(PL061State *s) changed = s->old_out_data ^ out; if (changed) { s->old_out_data = out; - for (i = 0; i < 8; i++) { + for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { DPRINTF("Set output %d = %d\n", i, (out & mask) != 0); @@ -125,7 +127,7 @@ static void pl061_update(PL061State *s) changed = (s->old_in_data ^ s->data) & ~s->dir; if (changed) { s->old_in_data = s->data; - for (i = 0; i < 8; i++) { + for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { DPRINTF("Changed input %d = %d\n", i, (s->data & mask) != 0); @@ -364,8 +366,8 @@ static void pl061_init(Object *obj) memory_region_init_io(&s->iomem, obj, &pl061_ops, s, "pl061", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); - qdev_init_gpio_in(dev, pl061_set_irq, 8); - qdev_init_gpio_out(dev, s->out, 8); + qdev_init_gpio_in(dev, pl061_set_irq, N_GPIOS); + qdev_init_gpio_out(dev, s->out, N_GPIOS); } static void pl061_class_init(ObjectClass *klass, void *data)
Add a definition for the number of GPIO lines controlled by a PL061 instance, and use it instead of the hardcoded magic value 8. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- hw/gpio/pl061.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)