mbox series

[V3,00/10] clk: imx: fixes and improve for i.MX8M

Message ID 1588830979-11586-1-git-send-email-peng.fan@nxp.com (mailing list archive)
Headers show
Series clk: imx: fixes and improve for i.MX8M | expand

Message

Peng Fan May 7, 2020, 5:56 a.m. UTC
From: Peng Fan <peng.fan@nxp.com>

Patches rebased on for-next

V3:
 Add R-b tag for patch 1-6,10
 Use clk_mux_ops in patch 7, explain more details in commit log
 Boot test on i.MX8MM/N/MQ/P

V2:
 Patch 7, drop wait after write, add one line comment for write twice

V1:
Patch 1,2 is to fix the lockdep warning reported by Leonard
Patch 3 is to fix pll mux bit
Patch 4 is align with other i.MX8M using gate
Patch 5 is to simplify i.MX8MP clk root using composite

Patch 3~5 is actually https://patchwork.kernel.org/patch/11402761/
with a minimal change to patch 5 here.

Patch 6 is to use composite core clk for A53 clk root
Patch 7,8,9 is actually to fix CORE/BUS clk slice issue.
 This issue is triggerred after we update U-Boot to include
 the A53 clk fixes to sources from PLL, not from A53 root clk,
 because of the signoff timing is 1GHz. U-Boot set the A53 root
 mux to 2, sys pll2 500MHz. Kernel will set the A53 root mux to
 4, sys pll1 800MHz, then gate off sys pll2 500MHz. Then kernel
 will gate off A53 root because clk_ignore_unsed, A53 directly sources
 PLL, so it is ok to gate off A53 root. However when gate off A53
 root clk, system hang, because the original mux sys pll2 500MHz
 gated off with CLK_OPS_PARENT_ENABLE flag.

 It is lucky that we not met issue for other core/bus clk slice
 except A53 ROOT core slice. But it is always triggerred after
 U-Boot and Linux both switch to use ARM PLL for A53 core, but
 have different mux settings for A53 root clk slice.

 So the three patches is to address this issue.

Patch 10 is make memrepair as critical.

Peng Fan (10):
  arm64: dts: imx8m: assign clocks for A53
  clk: imx8m: drop clk_hw_set_parent for A53
  clk: imx: imx8mp: fix pll mux bit
  clk: imx8mp: Define gates for pll1/2 fixed dividers
  clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code
  clk: imx8m: migrate A53 clk root to use composite core
  clk: imx: add mux ops for i.MX8M composite clk
  clk: imx: add imx8m_clk_hw_composite_bus
  clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice
  clk: imx8mp: mark memrepair clock as critical

 arch/arm64/boot/dts/freescale/imx8mm.dtsi |  10 +-
 arch/arm64/boot/dts/freescale/imx8mn.dtsi |  10 +-
 arch/arm64/boot/dts/freescale/imx8mp.dtsi |  11 ++-
 arch/arm64/boot/dts/freescale/imx8mq.dtsi |   9 +-
 drivers/clk/imx/clk-composite-8m.c        |  56 ++++++++++-
 drivers/clk/imx/clk-imx8mm.c              |  27 +++---
 drivers/clk/imx/clk-imx8mn.c              |  25 +++--
 drivers/clk/imx/clk-imx8mp.c              | 150 +++++++++++++++---------------
 drivers/clk/imx/clk-imx8mq.c              |  29 +++---
 drivers/clk/imx/clk.h                     |   7 ++
 include/dt-bindings/clock/imx8mp-clock.h  |  28 +++++-
 11 files changed, 229 insertions(+), 133 deletions(-)

Comments

Aisheng Dong May 7, 2020, 6:58 a.m. UTC | #1
> From: Peng Fan <peng.fan@nxp.com>
> Sent: Thursday, May 7, 2020 1:56 PM
> 
> Patches rebased on for-next
> 
> V3:
>  Add R-b tag for patch 1-6,10
>  Use clk_mux_ops in patch 7, explain more details in commit log  Boot test on
> i.MX8MM/N/MQ/P

Good improvement, it's much clear now. 
So also add my tag for Patch 5-9:
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

For patch 10, still has a small question.
See comment in that patch.

Regards
Aisheng

> 
> V2:
>  Patch 7, drop wait after write, add one line comment for write twice
> 
> V1:
> Patch 1,2 is to fix the lockdep warning reported by Leonard Patch 3 is to fix pll
> mux bit Patch 4 is align with other i.MX8M using gate Patch 5 is to simplify
> i.MX8MP clk root using composite
> 
> Patch 3~5 is actually https://patchwork.kernel.org/patch/11402761/
> with a minimal change to patch 5 here.
> 
> Patch 6 is to use composite core clk for A53 clk root Patch 7,8,9 is actually to fix
> CORE/BUS clk slice issue.
>  This issue is triggerred after we update U-Boot to include  the A53 clk fixes to
> sources from PLL, not from A53 root clk,  because of the signoff timing is 1GHz.
> U-Boot set the A53 root  mux to 2, sys pll2 500MHz. Kernel will set the A53
> root mux to  4, sys pll1 800MHz, then gate off sys pll2 500MHz. Then kernel
> will gate off A53 root because clk_ignore_unsed, A53 directly sources  PLL, so it
> is ok to gate off A53 root. However when gate off A53  root clk, system hang,
> because the original mux sys pll2 500MHz  gated off with
> CLK_OPS_PARENT_ENABLE flag.
> 
>  It is lucky that we not met issue for other core/bus clk slice  except A53 ROOT
> core slice. But it is always triggerred after  U-Boot and Linux both switch to use
> ARM PLL for A53 core, but  have different mux settings for A53 root clk slice.
> 
>  So the three patches is to address this issue.
> 
> Patch 10 is make memrepair as critical.
> 
> Peng Fan (10):
>   arm64: dts: imx8m: assign clocks for A53
>   clk: imx8m: drop clk_hw_set_parent for A53
>   clk: imx: imx8mp: fix pll mux bit
>   clk: imx8mp: Define gates for pll1/2 fixed dividers
>   clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code
>   clk: imx8m: migrate A53 clk root to use composite core
>   clk: imx: add mux ops for i.MX8M composite clk
>   clk: imx: add imx8m_clk_hw_composite_bus
>   clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice
>   clk: imx8mp: mark memrepair clock as critical
> 
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi |  10 +-
> arch/arm64/boot/dts/freescale/imx8mn.dtsi |  10 +-
> arch/arm64/boot/dts/freescale/imx8mp.dtsi |  11 ++-
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi |   9 +-
>  drivers/clk/imx/clk-composite-8m.c        |  56 ++++++++++-
>  drivers/clk/imx/clk-imx8mm.c              |  27 +++---
>  drivers/clk/imx/clk-imx8mn.c              |  25 +++--
>  drivers/clk/imx/clk-imx8mp.c              | 150
> +++++++++++++++---------------
>  drivers/clk/imx/clk-imx8mq.c              |  29 +++---
>  drivers/clk/imx/clk.h                     |   7 ++
>  include/dt-bindings/clock/imx8mp-clock.h  |  28 +++++-
>  11 files changed, 229 insertions(+), 133 deletions(-)
> 
> --
> 2.16.4
Shawn Guo May 20, 2020, 1:27 a.m. UTC | #2
On Thu, May 07, 2020 at 01:56:09PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Patches rebased on for-next
> 
> V3:
>  Add R-b tag for patch 1-6,10
>  Use clk_mux_ops in patch 7, explain more details in commit log
>  Boot test on i.MX8MM/N/MQ/P
> 
> V2:
>  Patch 7, drop wait after write, add one line comment for write twice
> 
> V1:
> Patch 1,2 is to fix the lockdep warning reported by Leonard
> Patch 3 is to fix pll mux bit
> Patch 4 is align with other i.MX8M using gate
> Patch 5 is to simplify i.MX8MP clk root using composite
> 
> Patch 3~5 is actually https://patchwork.kernel.org/patch/11402761/
> with a minimal change to patch 5 here.
> 
> Patch 6 is to use composite core clk for A53 clk root
> Patch 7,8,9 is actually to fix CORE/BUS clk slice issue.
>  This issue is triggerred after we update U-Boot to include
>  the A53 clk fixes to sources from PLL, not from A53 root clk,
>  because of the signoff timing is 1GHz. U-Boot set the A53 root
>  mux to 2, sys pll2 500MHz. Kernel will set the A53 root mux to
>  4, sys pll1 800MHz, then gate off sys pll2 500MHz. Then kernel
>  will gate off A53 root because clk_ignore_unsed, A53 directly sources
>  PLL, so it is ok to gate off A53 root. However when gate off A53
>  root clk, system hang, because the original mux sys pll2 500MHz
>  gated off with CLK_OPS_PARENT_ENABLE flag.
> 
>  It is lucky that we not met issue for other core/bus clk slice
>  except A53 ROOT core slice. But it is always triggerred after
>  U-Boot and Linux both switch to use ARM PLL for A53 core, but
>  have different mux settings for A53 root clk slice.
> 
>  So the three patches is to address this issue.
> 
> Patch 10 is make memrepair as critical.
> 
> Peng Fan (10):
>   arm64: dts: imx8m: assign clocks for A53
>   clk: imx8m: drop clk_hw_set_parent for A53
>   clk: imx: imx8mp: fix pll mux bit
>   clk: imx8mp: Define gates for pll1/2 fixed dividers
>   clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code
>   clk: imx8m: migrate A53 clk root to use composite core
>   clk: imx: add mux ops for i.MX8M composite clk
>   clk: imx: add imx8m_clk_hw_composite_bus
>   clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice

Applied 1 ~ 9, thanks.

>   clk: imx8mp: mark memrepair clock as critical