[v12,1/3] dt-bindings: i2c: npcm7xx: add NPCM I2C controller

Commit Message

Tali Perry May 21, 2020, 11:09 a.m. UTC

Added device tree binding documentation for Nuvoton BMC
NPCM I2C controller.

Signed-off-by: Tali Perry <[e-mail]>
---
 .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml     | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml

Comments

Rob Herring (Arm) May 21, 2020, 7:58 p.m. UTC | #1

On Thu, 21 May 2020 14:09:08 +0300, Tali Perry wrote:
> Added device tree binding documentation for Nuvoton BMC
> NPCM I2C controller.
> 
> Signed-off-by: Tali Perry <[e-mail]>
> ---
>  .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml     | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Error: Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.example.dts:22.28-29 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:312: recipe for target 'Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.example.dt.yaml' failed
make[1]: *** [Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1295115

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

Patch

diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
new file mode 100644
index 000000000000..fb4293f11461
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -0,0 +1,62 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+
+description: |
+  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
+  both master and slave mode. Each controller can switch between master and slave
+  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
+  RX.
+
+maintainers:
+  - Tali Perry <[e-mail]>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm7xx-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Reference clock for the I2C bus
+
+  bus-frequency:
+    description: Desired I2C bus clock frequency in Hz. If not specified,
+                 the default 100 kHz frequency will be used.
+                 possible values are 100000, 400000 and 1000000.
+    default: 100000
+    enum: [100000, 400000, 1000000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0: i2c@80000 {
+        compatible = "nuvoton,npcm750-i2c";
+        reg = <0x80000 0x1000>;
+        clocks = <&clk NPCM7XX_CLK_APB2>;
+        bus-frequency = <100000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&smb0_pins>;
+    };
+
+...