diff mbox series

usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set

Message ID 20200520150111.76658-1-paul@crapouillou.net (mailing list archive)
State Mainlined
Commit 685f5f24108a5f3481da70ee75a1b18b9de34257
Headers show
Series usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set | expand

Commit Message

Paul Cercueil May 20, 2020, 3:01 p.m. UTC
The function dma_controller_irq() locks up the exact same spinlock we
locked before calling it, which obviously resulted in a deadlock when
CONFIG_SMP was enabled. This flew under the radar as none of the boards
supported by this driver needs SMP.

Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/usb/musb/jz4740.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Bin Liu May 21, 2020, 8:34 p.m. UTC | #1
On Wed, May 20, 2020 at 05:01:11PM +0200, Paul Cercueil wrote:
> The function dma_controller_irq() locks up the exact same spinlock we
> locked before calling it, which obviously resulted in a deadlock when
> CONFIG_SMP was enabled. This flew under the radar as none of the boards
> supported by this driver needs SMP.
> 
> Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA")
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>

Queued for v5.8. Thanks.
-Bin.
Paul Cercueil May 21, 2020, 8:39 p.m. UTC | #2
Hi Bin,

The patch it fixes was introduced in 5.7-rc1, is it possible to queue 
it for the next -rc? Otherwise I'll need to Cc it to linux-stable.

-Paul

Le jeu. 21 mai 2020 à 15:34, Bin Liu <b-liu@ti.com> a écrit :
> On Wed, May 20, 2020 at 05:01:11PM +0200, Paul Cercueil wrote:
>>  The function dma_controller_irq() locks up the exact same spinlock 
>> we
>>  locked before calling it, which obviously resulted in a deadlock 
>> when
>>  CONFIG_SMP was enabled. This flew under the radar as none of the 
>> boards
>>  supported by this driver needs SMP.
>> 
>>  Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA")
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> 
> Queued for v5.8. Thanks.
> -Bin.
Bin Liu May 21, 2020, 9:28 p.m. UTC | #3
Hi Greg,

On Wed, May 20, 2020 at 05:01:11PM +0200, Paul Cercueil wrote:
> The function dma_controller_irq() locks up the exact same spinlock we
> locked before calling it, which obviously resulted in a deadlock when
> CONFIG_SMP was enabled. This flew under the radar as none of the boards
> supported by this driver needs SMP.
> 
> Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA")
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>

Is it too late if you directly take this patch for v5.7-rc7? The bug is
introduced in v5.7-rc1. If so, here is my Acked-by:

Acked-by: Bin Liu <b-liu@ti.com>

Thanks,
-Bin.

> ---
>  drivers/usb/musb/jz4740.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
> index 54e7b30acc69..42c1e8bfc4be 100644
> --- a/drivers/usb/musb/jz4740.c
> +++ b/drivers/usb/musb/jz4740.c
> @@ -69,11 +69,11 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
>  	irqreturn_t	retval = IRQ_NONE, retval_dma = IRQ_NONE;
>  	struct musb	*musb = __hci;
>  
> -	spin_lock_irqsave(&musb->lock, flags);
> -
>  	if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
>  		retval_dma = dma_controller_irq(irq, musb->dma_controller);
>  
> +	spin_lock_irqsave(&musb->lock, flags);
> +
>  	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
>  	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
>  	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
> -- 
> 2.26.2
>
Bin Liu May 21, 2020, 9:30 p.m. UTC | #4
On Thu, May 21, 2020 at 10:39:25PM +0200, Paul Cercueil wrote:
> Hi Bin,
> 
> The patch it fixes was introduced in 5.7-rc1, is it possible to queue it for
> the next -rc? Otherwise I'll need to Cc it to linux-stable.

I pinged Grag if he can directly take it for -rc7.

-Bin.
Bin Liu May 21, 2020, 9:35 p.m. UTC | #5
Paul,

On Thu, May 21, 2020 at 04:30:28PM -0500, Bin Liu wrote:
> On Thu, May 21, 2020 at 10:39:25PM +0200, Paul Cercueil wrote:
> > Hi Bin,
> > 
> > The patch it fixes was introduced in 5.7-rc1, is it possible to queue it for
> > the next -rc? Otherwise I'll need to Cc it to linux-stable.
> 
> I pinged Grag if he can directly take it for -rc7.

BTY, it is not an issue if it is too late for -rc7, I've already added
Cc stable@ when queueing it.

-Bin.
diff mbox series

Patch

diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 54e7b30acc69..42c1e8bfc4be 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -69,11 +69,11 @@  static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
 	irqreturn_t	retval = IRQ_NONE, retval_dma = IRQ_NONE;
 	struct musb	*musb = __hci;
 
-	spin_lock_irqsave(&musb->lock, flags);
-
 	if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
 		retval_dma = dma_controller_irq(irq, musb->dma_controller);
 
+	spin_lock_irqsave(&musb->lock, flags);
+
 	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
 	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
 	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);