| Message ID | 20200423174543.17161-11-michael@walle.cc (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for Kontron sl28cpld | expand |
czw., 23 kwi 2020 o 19:46 Michael Walle <michael@walle.cc> napisał(a): > > There are quite a lot simple GPIO controller which are using regmap to > access the hardware. This driver tries to be a base to unify existing > code into one place. This won't cover everything but it should be a good > starting point. > > It does not implement its own irq_chip because there is already a > generic one for regmap based devices. Instead, the irq_chip will be > instantiated in the parent driver and its irq domain will be associate > to this driver. > > For now it consists of the usual registers, like set (and an optional > clear) data register, an input register and direction registers. > Out-of-the-box, it supports consecutive register mappings and mappings > where the registers have gaps between them with a linear mapping between > GPIO offset and bit position. For weirder mappings the user can register > its own .xlate(). > > Signed-off-by: Michael Walle <michael@walle.cc> > --- This looks good to me. Please see some nits below. > drivers/gpio/Kconfig | 4 + > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-regmap.c | 343 ++++++++++++++++++++++++++++++++++++ > include/linux/gpio-regmap.h | 69 ++++++++ > 4 files changed, 417 insertions(+) > create mode 100644 drivers/gpio/gpio-regmap.c > create mode 100644 include/linux/gpio-regmap.h > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index 8ef2179fb999..ae3a49a2e970 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -73,6 +73,10 @@ config GPIO_GENERIC > depends on HAS_IOMEM # Only for IOMEM drivers > tristate > > +config GPIO_REGMAP > + depends on REGMAP > + tristate > + > # put drivers in the right section, in alphabetical order > > # This symbol is selected by both I2C and SPI expanders > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile > index b2cfc21a97f3..93e139fdfa57 100644 > --- a/drivers/gpio/Makefile > +++ b/drivers/gpio/Makefile > @@ -12,6 +12,7 @@ obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o > obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o > > # Device drivers. Generally keep list sorted alphabetically > +obj-$(CONFIG_GPIO_REGMAP) += gpio-regmap.o > obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o > > # directly supported by gpio-generic > diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c > new file mode 100644 > index 000000000000..04939c0a22f9 > --- /dev/null > +++ b/drivers/gpio/gpio-regmap.c > @@ -0,0 +1,343 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * regmap based generic GPIO driver > + * > + * Copyright 2019 Michael Walle <michael@walle.cc> > + */ > + > +#include <linux/gpio/driver.h> > +#include <linux/gpio-regmap.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > + > +struct gpio_regmap { > + struct device *parent; > + struct regmap *regmap; > + struct gpio_chip gpio_chip; > + > + int reg_stride; > + int ngpio_per_reg; > + unsigned int reg_dat_base; > + unsigned int reg_set_base; > + unsigned int reg_clr_base; > + unsigned int reg_dir_in_base; > + unsigned int reg_dir_out_base; > + > + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base, > + unsigned int offset, unsigned int *reg, > + unsigned int *mask); > + > + void *driver_data; > +}; > + > +static unsigned int gpio_regmap_addr(unsigned int addr) > +{ > + return (addr == GPIO_REGMAP_ADDR_ZERO) ? 0 : addr; > +} > + > +/** > + * gpio_regmap_simple_xlate() - translate base/offset to reg/mask > + * > + * Use a simple linear mapping to translate the offset to the bitmask. > + */ > +static int gpio_regmap_simple_xlate(struct gpio_regmap *gpio, > + unsigned int base, unsigned int offset, > + unsigned int *reg, unsigned int *mask) > +{ > + unsigned int line = offset % gpio->ngpio_per_reg; > + unsigned int stride = offset / gpio->ngpio_per_reg; > + > + *reg = base + stride * gpio->reg_stride; > + *mask = BIT(line); > + > + return 0; > +} > + > +static int gpio_regmap_get(struct gpio_chip *chip, unsigned int offset) > +{ > + struct gpio_regmap *gpio = gpiochip_get_data(chip); > + unsigned int base, val, reg, mask; > + int ret; > + > + /* we might not have an output register if we are input only */ > + if (gpio->reg_dat_base) > + base = gpio_regmap_addr(gpio->reg_dat_base); > + else > + base = gpio_regmap_addr(gpio->reg_set_base); > + > + ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); > + if (ret) > + return ret; > + > + ret = regmap_read(gpio->regmap, reg, &val); > + if (ret) > + return ret; > + > + return (val & mask) ? 1 : 0; > +} > + > +static void gpio_regmap_set(struct gpio_chip *chip, unsigned int offset, > + int val) > +{ > + struct gpio_regmap *gpio = gpiochip_get_data(chip); > + unsigned int base = gpio_regmap_addr(gpio->reg_set_base); > + unsigned int reg, mask; > + > + gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); > + if (val) > + regmap_update_bits(gpio->regmap, reg, mask, mask); > + else > + regmap_update_bits(gpio->regmap, reg, mask, 0); > +} > + > +static void gpio_regmap_set_with_clear(struct gpio_chip *chip, > + unsigned int offset, int val) > +{ > + struct gpio_regmap *gpio = gpiochip_get_data(chip); > + unsigned int base, reg, mask; > + > + if (val) > + base = gpio_regmap_addr(gpio->reg_set_base); > + else > + base = gpio_regmap_addr(gpio->reg_clr_base); > + > + gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); > + regmap_write(gpio->regmap, reg, mask); > +} > + > +static int gpio_regmap_get_direction(struct gpio_chip *chip, > + unsigned int offset) > +{ > + struct gpio_regmap *gpio = gpiochip_get_data(chip); > + unsigned int base, val, reg, mask; > + int invert, ret; > + > + if (gpio->reg_dir_out_base) { > + base = gpio_regmap_addr(gpio->reg_dir_out_base); > + invert = 0; > + } else if (gpio->reg_dir_in_base) { > + base = gpio_regmap_addr(gpio->reg_dir_in_base); > + invert = 1; > + } else { > + return GPIO_LINE_DIRECTION_IN; > + } > + > + ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); > + if (ret) > + return ret; > + > + ret = regmap_read(gpio->regmap, reg, &val); > + if (ret) > + return ret; > + > + if (!!(val & mask) ^ invert) > + return GPIO_LINE_DIRECTION_OUT; > + else > + return GPIO_LINE_DIRECTION_IN; > +} > + > +static int gpio_regmap_set_direction(struct gpio_chip *chip, > + unsigned int offset, bool output) > +{ > + struct gpio_regmap *gpio = gpiochip_get_data(chip); > + unsigned int base, val, reg, mask; > + int invert, ret; > + > + if (gpio->reg_dir_out_base) { > + base = gpio_regmap_addr(gpio->reg_dir_out_base); > + invert = 0; > + } else if (gpio->reg_dir_in_base) { > + base = gpio_regmap_addr(gpio->reg_dir_in_base); > + invert = 1; > + } else { > + return 0; > + } > + > + ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); > + if (ret) > + return ret; > + > + if (!invert) > + val = (output) ? mask : 0; > + else > + val = (output) ? 0 : mask; > + > + return regmap_update_bits(gpio->regmap, reg, mask, val); > +} > + > +static int gpio_regmap_direction_input(struct gpio_chip *chip, > + unsigned int offset) > +{ > + return gpio_regmap_set_direction(chip, offset, false); > +} > + > +static int gpio_regmap_direction_output(struct gpio_chip *chip, > + unsigned int offset, int value) > +{ > + gpio_regmap_set(chip, offset, value); > + > + return gpio_regmap_set_direction(chip, offset, true); > +} > + > +void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data) > +{ > + gpio->driver_data = data; > +} > +EXPORT_SYMBOL_GPL(gpio_regmap_set_drvdata); > + > +void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio) > +{ > + return gpio->driver_data; > +} > +EXPORT_SYMBOL_GPL(gpio_regmap_get_drvdata); > + > +/** > + * gpio_regmap_register() - Register a generic regmap GPIO controller > + * > + * @gpio: gpio_regmap device to register > + * > + * Returns 0 on success or an errno on failure. > + */ > +struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config) > +{ > + struct gpio_regmap *gpio; > + struct gpio_chip *chip; > + int ret; > + > + if (!config->parent) > + return ERR_PTR(-EINVAL); > + > + if (!config->ngpio) > + return ERR_PTR(-EINVAL); > + > + /* we need at least one */ > + if (!config->reg_dat_base && !config->reg_set_base) > + return ERR_PTR(-EINVAL); > + > + /* we don't support having both registers simulaniously for now */ > + if (config->reg_dir_out_base && config->reg_dir_in_base) > + return ERR_PTR(-EINVAL); > + > + gpio = kzalloc(sizeof(*gpio), GFP_KERNEL); > + if (!gpio) > + return ERR_PTR(-ENOMEM); > + > + gpio->parent = config->parent; > + gpio->regmap = config->regmap; > + gpio->ngpio_per_reg = config->ngpio_per_reg; > + gpio->reg_stride = config->reg_stride; > + gpio->reg_mask_xlate = config->reg_mask_xlate; > + gpio->reg_set_base = config->reg_set_base; > + gpio->reg_clr_base = config->reg_clr_base; > + gpio->reg_dir_in_base = config->reg_dir_in_base; > + gpio->reg_dir_out_base = config->reg_dir_out_base; > + > + /* if not set, assume there is only one register */ > + if (!gpio->ngpio_per_reg) > + gpio->ngpio_per_reg = config->ngpio; > + > + /* if not set, assume they are consecutive */ > + if (!gpio->reg_stride) > + gpio->reg_stride = 1; > + > + if (!gpio->reg_mask_xlate) > + gpio->reg_mask_xlate = gpio_regmap_simple_xlate; > + > + chip = &gpio->gpio_chip; > + chip->parent = config->parent; > + chip->base = -1; > + chip->ngpio = config->ngpio; > + chip->can_sleep = true; > + > + if (!chip->label) > + chip->label = dev_name(config->parent); > + else > + chip->label = config->label; > + > + chip->get = gpio_regmap_get; > + if (gpio->reg_set_base && gpio->reg_clr_base) > + chip->set = gpio_regmap_set_with_clear; > + else if (gpio->reg_set_base) > + chip->set = gpio_regmap_set; > + > + if (gpio->reg_dir_in_base || gpio->reg_dir_out_base) { > + chip->get_direction = gpio_regmap_get_direction; > + chip->direction_input = gpio_regmap_direction_input; > + chip->direction_output = gpio_regmap_direction_output; > + } > + > + ret = gpiochip_add_data(chip, gpio); > + if (ret < 0) { > + kfree(gpio); Maybe add a second label at the end of the function? > + return ERR_PTR(ret); > + } > + > + if (config->irq_domain) { > + ret = gpiochip_irqchip_add_domain(chip, config->irq_domain); > + if (ret < 0) > + goto err; > + } > + > + return gpio; > + > +err: > + gpiochip_remove(chip); > + kfree(gpio); > + return ERR_PTR(ret); > +} > +EXPORT_SYMBOL_GPL(gpio_regmap_register); > + > +/** > + * gpio_regmap_unregister() - Unregister a generic regmap GPIO controller > + * > + * @gpio: gpio_regmap device to unregister > + */ > +void gpio_regmap_unregister(struct gpio_regmap *gpio) > +{ > + gpiochip_remove(&gpio->gpio_chip); > + kfree(gpio); > +} > +EXPORT_SYMBOL_GPL(gpio_regmap_unregister); > + > +static void devm_gpio_regmap_unregister(struct device *dev, void *res) > +{ > + gpio_regmap_unregister(*(struct gpio_regmap **)res); > +} > + > +/** > + * devm_gpio_regmap_register() - resource managed gpio_regmap_register() > + * > + * @dev: device that is registering this GPIO device > + * @gpio: gpio_regmap device to register > + * > + * Managed gpio_regmap_register(). For generic regmap GPIO device registered by > + * this function, gpio_regmap_unregister() is automatically called on driver > + * detach. See gpio_regmap_register() for more information. > + */ > +struct gpio_regmap *devm_gpio_regmap_register(struct device *dev, > + const struct gpio_regmap_config *config) > +{ > + struct gpio_regmap **ptr, *gpio; > + > + ptr = devres_alloc(devm_gpio_regmap_unregister, sizeof(*ptr), > + GFP_KERNEL); > + if (!ptr) > + return ERR_PTR(-ENOMEM); > + > + gpio = gpio_regmap_register(config); > + > + if (!IS_ERR(gpio)) { > + *ptr = gpio; > + devres_add(dev, ptr); > + } else { > + devres_free(ptr); > + } > + > + return gpio; > +} > +EXPORT_SYMBOL_GPL(devm_gpio_regmap_register); > + > +MODULE_AUTHOR("Michael Walle <michael@walle.cc>"); > +MODULE_DESCRIPTION("GPIO generic regmap driver core"); > +MODULE_LICENSE("GPL"); > diff --git a/include/linux/gpio-regmap.h b/include/linux/gpio-regmap.h > new file mode 100644 > index 000000000000..a868cbcde6e9 > --- /dev/null > +++ b/include/linux/gpio-regmap.h > @@ -0,0 +1,69 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > + > +#ifndef _LINUX_GPIO_REGMAP_H > +#define _LINUX_GPIO_REGMAP_H > + > +struct gpio_regmap; > + > +#define GPIO_REGMAP_ADDR_ZERO ((unsigned long)(-1)) > +#define GPIO_REGMAP_ADDR(addr) ((addr) ? : GPIO_REGMAP_ADDR_ZERO) > + What if the addr is actually 0? Maybe drop GPIO_REGMAP_ADDR and require users to set unused registers to GPIO_REGMAP_ADDR_ZERO? > +/** > + * struct gpio_regmap_config - Description of a generic regmap gpio_chip. > + * > + * @parent: The parent device > + * @regmap: The regmap used to access the registers > + * given, the name of the device is used > + * @label: (Optional) Descriptive name for GPIO controller. > + * If not given, the name of the device is used. > + * @ngpio: Number of GPIOs > + * @reg_dat_base: (Optional) (in) register base address > + * @reg_set_base: (Optional) set register base address > + * @reg_clr_base: (Optional) clear register base address > + * @reg_dir_in_base: (Optional) out setting register base address > + * @reg_dir_out_base: (Optional) in setting register base address The two above are inverted I think? Also: why the limitation of only supporting one at a time? > + * @reg_stride: (Optional) May be set if the registers (of the > + * same type, dat, set, etc) are not consecutive. > + * @ngpio_per_reg: Number of GPIOs per register > + * @irq_domain: (Optional) IRQ domain if the controller is > + * interrupt-capable > + * @reg_mask_xlate: (Optional) Translates base address and GPIO > + * offset to a register/bitmask pair. If not > + * given the default gpio_regmap_simple_xlate() > + * is used. > + * > + * The reg_mask_xlate translates a given base address and GPIO offset to > + * register and mask pair. The base address is one of the given reg_*_base. > + * > + * All base addresses may have the special value GPIO_REGMAP_ADDR_ZERO > + * which forces the address to the value 0. > + */ > +struct gpio_regmap_config { > + struct device *parent; > + struct regmap *regmap; > + > + const char *label; > + int ngpio; > + > + unsigned int reg_dat_base; > + unsigned int reg_set_base; > + unsigned int reg_clr_base; > + unsigned int reg_dir_in_base; > + unsigned int reg_dir_out_base; > + int reg_stride; > + int ngpio_per_reg; > + struct irq_domain *irq_domain; > + > + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base, > + unsigned int offset, unsigned int *reg, > + unsigned int *mask); > +}; > + > +struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config); > +void gpio_regmap_unregister(struct gpio_regmap *gpio); > +struct gpio_regmap *devm_gpio_regmap_register(struct device *dev, > + const struct gpio_regmap_config *config); > +void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data); > +void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio); > + > +#endif /* _LINUX_GPIO_REGMAP_H */ > -- > 2.20.1 >
Am 2020-05-12 14:48, schrieb Bartosz Golaszewski: > czw., 23 kwi 2020 o 19:46 Michael Walle <michael@walle.cc> napisał(a): >> >> There are quite a lot simple GPIO controller which are using regmap to >> access the hardware. This driver tries to be a base to unify existing >> code into one place. This won't cover everything but it should be a >> good >> starting point. >> >> It does not implement its own irq_chip because there is already a >> generic one for regmap based devices. Instead, the irq_chip will be >> instantiated in the parent driver and its irq domain will be associate >> to this driver. >> >> For now it consists of the usual registers, like set (and an optional >> clear) data register, an input register and direction registers. >> Out-of-the-box, it supports consecutive register mappings and mappings >> where the registers have gaps between them with a linear mapping >> between >> GPIO offset and bit position. For weirder mappings the user can >> register >> its own .xlate(). >> >> Signed-off-by: Michael Walle <michael@walle.cc> >> --- > > This looks good to me. Please see some nits below. > >> drivers/gpio/Kconfig | 4 + >> drivers/gpio/Makefile | 1 + >> drivers/gpio/gpio-regmap.c | 343 >> ++++++++++++++++++++++++++++++++++++ >> include/linux/gpio-regmap.h | 69 ++++++++ >> 4 files changed, 417 insertions(+) >> create mode 100644 drivers/gpio/gpio-regmap.c >> create mode 100644 include/linux/gpio-regmap.h >> >> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig >> index 8ef2179fb999..ae3a49a2e970 100644 >> --- a/drivers/gpio/Kconfig >> +++ b/drivers/gpio/Kconfig >> @@ -73,6 +73,10 @@ config GPIO_GENERIC >> depends on HAS_IOMEM # Only for IOMEM drivers >> tristate >> >> +config GPIO_REGMAP >> + depends on REGMAP >> + tristate >> + >> # put drivers in the right section, in alphabetical order >> >> # This symbol is selected by both I2C and SPI expanders >> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile >> index b2cfc21a97f3..93e139fdfa57 100644 >> --- a/drivers/gpio/Makefile >> +++ b/drivers/gpio/Makefile >> @@ -12,6 +12,7 @@ obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o >> obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o >> >> # Device drivers. Generally keep list sorted alphabetically >> +obj-$(CONFIG_GPIO_REGMAP) += gpio-regmap.o >> obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o >> >> # directly supported by gpio-generic >> diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c >> new file mode 100644 >> index 000000000000..04939c0a22f9 >> --- /dev/null >> +++ b/drivers/gpio/gpio-regmap.c >> @@ -0,0 +1,343 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * regmap based generic GPIO driver >> + * >> + * Copyright 2019 Michael Walle <michael@walle.cc> >> + */ >> + >> +#include <linux/gpio/driver.h> >> +#include <linux/gpio-regmap.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/regmap.h> >> + >> +struct gpio_regmap { >> + struct device *parent; >> + struct regmap *regmap; >> + struct gpio_chip gpio_chip; >> + >> + int reg_stride; >> + int ngpio_per_reg; >> + unsigned int reg_dat_base; >> + unsigned int reg_set_base; >> + unsigned int reg_clr_base; >> + unsigned int reg_dir_in_base; >> + unsigned int reg_dir_out_base; >> + >> + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int >> base, >> + unsigned int offset, unsigned int *reg, >> + unsigned int *mask); >> + >> + void *driver_data; >> +}; >> + >> +static unsigned int gpio_regmap_addr(unsigned int addr) >> +{ >> + return (addr == GPIO_REGMAP_ADDR_ZERO) ? 0 : addr; >> +} >> + >> +/** >> + * gpio_regmap_simple_xlate() - translate base/offset to reg/mask >> + * >> + * Use a simple linear mapping to translate the offset to the >> bitmask. >> + */ >> +static int gpio_regmap_simple_xlate(struct gpio_regmap *gpio, >> + unsigned int base, unsigned int >> offset, >> + unsigned int *reg, unsigned int >> *mask) >> +{ >> + unsigned int line = offset % gpio->ngpio_per_reg; >> + unsigned int stride = offset / gpio->ngpio_per_reg; >> + >> + *reg = base + stride * gpio->reg_stride; >> + *mask = BIT(line); >> + >> + return 0; >> +} >> + >> +static int gpio_regmap_get(struct gpio_chip *chip, unsigned int >> offset) >> +{ >> + struct gpio_regmap *gpio = gpiochip_get_data(chip); >> + unsigned int base, val, reg, mask; >> + int ret; >> + >> + /* we might not have an output register if we are input only >> */ >> + if (gpio->reg_dat_base) >> + base = gpio_regmap_addr(gpio->reg_dat_base); >> + else >> + base = gpio_regmap_addr(gpio->reg_set_base); >> + >> + ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); >> + if (ret) >> + return ret; >> + >> + ret = regmap_read(gpio->regmap, reg, &val); >> + if (ret) >> + return ret; >> + >> + return (val & mask) ? 1 : 0; >> +} >> + >> +static void gpio_regmap_set(struct gpio_chip *chip, unsigned int >> offset, >> + int val) >> +{ >> + struct gpio_regmap *gpio = gpiochip_get_data(chip); >> + unsigned int base = gpio_regmap_addr(gpio->reg_set_base); >> + unsigned int reg, mask; >> + >> + gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); >> + if (val) >> + regmap_update_bits(gpio->regmap, reg, mask, mask); >> + else >> + regmap_update_bits(gpio->regmap, reg, mask, 0); >> +} >> + >> +static void gpio_regmap_set_with_clear(struct gpio_chip *chip, >> + unsigned int offset, int val) >> +{ >> + struct gpio_regmap *gpio = gpiochip_get_data(chip); >> + unsigned int base, reg, mask; >> + >> + if (val) >> + base = gpio_regmap_addr(gpio->reg_set_base); >> + else >> + base = gpio_regmap_addr(gpio->reg_clr_base); >> + >> + gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); >> + regmap_write(gpio->regmap, reg, mask); >> +} >> + >> +static int gpio_regmap_get_direction(struct gpio_chip *chip, >> + unsigned int offset) >> +{ >> + struct gpio_regmap *gpio = gpiochip_get_data(chip); >> + unsigned int base, val, reg, mask; >> + int invert, ret; >> + >> + if (gpio->reg_dir_out_base) { >> + base = gpio_regmap_addr(gpio->reg_dir_out_base); >> + invert = 0; >> + } else if (gpio->reg_dir_in_base) { >> + base = gpio_regmap_addr(gpio->reg_dir_in_base); >> + invert = 1; >> + } else { >> + return GPIO_LINE_DIRECTION_IN; >> + } >> + >> + ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); >> + if (ret) >> + return ret; >> + >> + ret = regmap_read(gpio->regmap, reg, &val); >> + if (ret) >> + return ret; >> + >> + if (!!(val & mask) ^ invert) >> + return GPIO_LINE_DIRECTION_OUT; >> + else >> + return GPIO_LINE_DIRECTION_IN; >> +} >> + >> +static int gpio_regmap_set_direction(struct gpio_chip *chip, >> + unsigned int offset, bool output) >> +{ >> + struct gpio_regmap *gpio = gpiochip_get_data(chip); >> + unsigned int base, val, reg, mask; >> + int invert, ret; >> + >> + if (gpio->reg_dir_out_base) { >> + base = gpio_regmap_addr(gpio->reg_dir_out_base); >> + invert = 0; >> + } else if (gpio->reg_dir_in_base) { >> + base = gpio_regmap_addr(gpio->reg_dir_in_base); >> + invert = 1; >> + } else { >> + return 0; >> + } >> + >> + ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); >> + if (ret) >> + return ret; >> + >> + if (!invert) >> + val = (output) ? mask : 0; >> + else >> + val = (output) ? 0 : mask; >> + >> + return regmap_update_bits(gpio->regmap, reg, mask, val); >> +} >> + >> +static int gpio_regmap_direction_input(struct gpio_chip *chip, >> + unsigned int offset) >> +{ >> + return gpio_regmap_set_direction(chip, offset, false); >> +} >> + >> +static int gpio_regmap_direction_output(struct gpio_chip *chip, >> + unsigned int offset, int >> value) >> +{ >> + gpio_regmap_set(chip, offset, value); >> + >> + return gpio_regmap_set_direction(chip, offset, true); >> +} >> + >> +void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data) >> +{ >> + gpio->driver_data = data; >> +} >> +EXPORT_SYMBOL_GPL(gpio_regmap_set_drvdata); >> + >> +void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio) >> +{ >> + return gpio->driver_data; >> +} >> +EXPORT_SYMBOL_GPL(gpio_regmap_get_drvdata); >> + >> +/** >> + * gpio_regmap_register() - Register a generic regmap GPIO controller >> + * >> + * @gpio: gpio_regmap device to register >> + * >> + * Returns 0 on success or an errno on failure. >> + */ >> +struct gpio_regmap *gpio_regmap_register(const struct >> gpio_regmap_config *config) >> +{ >> + struct gpio_regmap *gpio; >> + struct gpio_chip *chip; >> + int ret; >> + >> + if (!config->parent) >> + return ERR_PTR(-EINVAL); >> + >> + if (!config->ngpio) >> + return ERR_PTR(-EINVAL); >> + >> + /* we need at least one */ >> + if (!config->reg_dat_base && !config->reg_set_base) >> + return ERR_PTR(-EINVAL); >> + >> + /* we don't support having both registers simulaniously for >> now */ >> + if (config->reg_dir_out_base && config->reg_dir_in_base) >> + return ERR_PTR(-EINVAL); >> + >> + gpio = kzalloc(sizeof(*gpio), GFP_KERNEL); >> + if (!gpio) >> + return ERR_PTR(-ENOMEM); >> + >> + gpio->parent = config->parent; >> + gpio->regmap = config->regmap; >> + gpio->ngpio_per_reg = config->ngpio_per_reg; >> + gpio->reg_stride = config->reg_stride; >> + gpio->reg_mask_xlate = config->reg_mask_xlate; >> + gpio->reg_set_base = config->reg_set_base; >> + gpio->reg_clr_base = config->reg_clr_base; >> + gpio->reg_dir_in_base = config->reg_dir_in_base; >> + gpio->reg_dir_out_base = config->reg_dir_out_base; >> + >> + /* if not set, assume there is only one register */ >> + if (!gpio->ngpio_per_reg) >> + gpio->ngpio_per_reg = config->ngpio; >> + >> + /* if not set, assume they are consecutive */ >> + if (!gpio->reg_stride) >> + gpio->reg_stride = 1; >> + >> + if (!gpio->reg_mask_xlate) >> + gpio->reg_mask_xlate = gpio_regmap_simple_xlate; >> + >> + chip = &gpio->gpio_chip; >> + chip->parent = config->parent; >> + chip->base = -1; >> + chip->ngpio = config->ngpio; >> + chip->can_sleep = true; >> + >> + if (!chip->label) >> + chip->label = dev_name(config->parent); >> + else >> + chip->label = config->label; >> + >> + chip->get = gpio_regmap_get; >> + if (gpio->reg_set_base && gpio->reg_clr_base) >> + chip->set = gpio_regmap_set_with_clear; >> + else if (gpio->reg_set_base) >> + chip->set = gpio_regmap_set; >> + >> + if (gpio->reg_dir_in_base || gpio->reg_dir_out_base) { >> + chip->get_direction = gpio_regmap_get_direction; >> + chip->direction_input = gpio_regmap_direction_input; >> + chip->direction_output = gpio_regmap_direction_output; >> + } >> + >> + ret = gpiochip_add_data(chip, gpio); >> + if (ret < 0) { >> + kfree(gpio); > > Maybe add a second label at the end of the function? sure >> + return ERR_PTR(ret); >> + } >> + >> + if (config->irq_domain) { >> + ret = gpiochip_irqchip_add_domain(chip, >> config->irq_domain); >> + if (ret < 0) >> + goto err; >> + } >> + >> + return gpio; >> + >> +err: >> + gpiochip_remove(chip); >> + kfree(gpio); >> + return ERR_PTR(ret); >> +} >> +EXPORT_SYMBOL_GPL(gpio_regmap_register); >> + >> +/** >> + * gpio_regmap_unregister() - Unregister a generic regmap GPIO >> controller >> + * >> + * @gpio: gpio_regmap device to unregister >> + */ >> +void gpio_regmap_unregister(struct gpio_regmap *gpio) >> +{ >> + gpiochip_remove(&gpio->gpio_chip); >> + kfree(gpio); >> +} >> +EXPORT_SYMBOL_GPL(gpio_regmap_unregister); >> + >> +static void devm_gpio_regmap_unregister(struct device *dev, void >> *res) >> +{ >> + gpio_regmap_unregister(*(struct gpio_regmap **)res); >> +} >> + >> +/** >> + * devm_gpio_regmap_register() - resource managed >> gpio_regmap_register() >> + * >> + * @dev: device that is registering this GPIO device >> + * @gpio: gpio_regmap device to register >> + * >> + * Managed gpio_regmap_register(). For generic regmap GPIO device >> registered by >> + * this function, gpio_regmap_unregister() is automatically called on >> driver >> + * detach. See gpio_regmap_register() for more information. >> + */ >> +struct gpio_regmap *devm_gpio_regmap_register(struct device *dev, >> + const struct >> gpio_regmap_config *config) >> +{ >> + struct gpio_regmap **ptr, *gpio; >> + >> + ptr = devres_alloc(devm_gpio_regmap_unregister, sizeof(*ptr), >> + GFP_KERNEL); >> + if (!ptr) >> + return ERR_PTR(-ENOMEM); >> + >> + gpio = gpio_regmap_register(config); >> + >> + if (!IS_ERR(gpio)) { >> + *ptr = gpio; >> + devres_add(dev, ptr); >> + } else { >> + devres_free(ptr); >> + } >> + >> + return gpio; >> +} >> +EXPORT_SYMBOL_GPL(devm_gpio_regmap_register); >> + >> +MODULE_AUTHOR("Michael Walle <michael@walle.cc>"); >> +MODULE_DESCRIPTION("GPIO generic regmap driver core"); >> +MODULE_LICENSE("GPL"); >> diff --git a/include/linux/gpio-regmap.h b/include/linux/gpio-regmap.h >> new file mode 100644 >> index 000000000000..a868cbcde6e9 >> --- /dev/null >> +++ b/include/linux/gpio-regmap.h >> @@ -0,0 +1,69 @@ >> +/* SPDX-License-Identifier: GPL-2.0-only */ >> + >> +#ifndef _LINUX_GPIO_REGMAP_H >> +#define _LINUX_GPIO_REGMAP_H >> + >> +struct gpio_regmap; >> + >> +#define GPIO_REGMAP_ADDR_ZERO ((unsigned long)(-1)) >> +#define GPIO_REGMAP_ADDR(addr) ((addr) ? : GPIO_REGMAP_ADDR_ZERO) >> + > > What if the addr is actually 0? Then the driver has to set GPIO_REGMAP_ADDR_ZERO or use the convenience macro GPIO_REGMAP_ADDR. So you can have struct gpio_regmap_config config = { 0 }; config.reg_dat_base = 0x10; config.reg_dir_out_base = 0x20; or config.reg_dat_base = GPIO_REGMAP_ADDR_ZERO; or if you can't be sure if the RHS value might be zero: config.reg_dat_base = GPIO_REGMAP_ADDR(reg); > Maybe drop GPIO_REGMAP_ADDR and require users to set unused registers > to GPIO_REGMAP_ADDR_ZERO? Thats bad because: * you'd have to set plenty of unused base registers for a simple driver * if there will be additional properties in the future, you have to touch all other drivers, because they are initialized as 0 (ie. valid reg 0). >> +/** >> + * struct gpio_regmap_config - Description of a generic regmap >> gpio_chip. >> + * >> + * @parent: The parent device >> + * @regmap: The regmap used to access the registers >> + * given, the name of the device is used >> + * @label: (Optional) Descriptive name for GPIO >> controller. >> + * If not given, the name of the device is used. >> + * @ngpio: Number of GPIOs >> + * @reg_dat_base: (Optional) (in) register base address >> + * @reg_set_base: (Optional) set register base address >> + * @reg_clr_base: (Optional) clear register base address >> + * @reg_dir_in_base: (Optional) out setting register base address >> + * @reg_dir_out_base: (Optional) in setting register base address > > The two above are inverted I think? good catch. > Also: why the limitation of only supporting one at a time? they should be exclusive, either you have a register where you set the output bits to one, or the input bits. Maybe this need a bit more context above. in gpio-mmio.c you can set both and both are used in set_direction(), but only one is read in get_direction(). That being said, I have no strong opinion wether they should be exclusive or not, besides the symmetry of set_/get_direction(). -michael > >> + * @reg_stride: (Optional) May be set if the registers >> (of the >> + * same type, dat, set, etc) are not consecutive. >> + * @ngpio_per_reg: Number of GPIOs per register >> + * @irq_domain: (Optional) IRQ domain if the >> controller is >> + * interrupt-capable >> + * @reg_mask_xlate: (Optional) Translates base address and GPIO >> + * offset to a register/bitmask pair. If not >> + * given the default gpio_regmap_simple_xlate() >> + * is used. >> + * >> + * The reg_mask_xlate translates a given base address and GPIO offset >> to >> + * register and mask pair. The base address is one of the given >> reg_*_base. >> + * >> + * All base addresses may have the special value >> GPIO_REGMAP_ADDR_ZERO >> + * which forces the address to the value 0. >> + */ >> +struct gpio_regmap_config { >> + struct device *parent; >> + struct regmap *regmap; >> + >> + const char *label; >> + int ngpio; >> + >> + unsigned int reg_dat_base; >> + unsigned int reg_set_base; >> + unsigned int reg_clr_base; >> + unsigned int reg_dir_in_base; >> + unsigned int reg_dir_out_base; >> + int reg_stride; >> + int ngpio_per_reg; >> + struct irq_domain *irq_domain; >> + >> + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int >> base, >> + unsigned int offset, unsigned int *reg, >> + unsigned int *mask); >> +}; >> + >> +struct gpio_regmap *gpio_regmap_register(const struct >> gpio_regmap_config *config); >> +void gpio_regmap_unregister(struct gpio_regmap *gpio); >> +struct gpio_regmap *devm_gpio_regmap_register(struct device *dev, >> + const struct >> gpio_regmap_config *config); >> +void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data); >> +void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio); >> + >> +#endif /* _LINUX_GPIO_REGMAP_H */ >> -- >> 2.20.1 >>
wt., 12 maj 2020 o 16:41 Michael Walle <michael@walle.cc> napisał(a): > > >> + > >> +MODULE_AUTHOR("Michael Walle <michael@walle.cc>"); > >> +MODULE_DESCRIPTION("GPIO generic regmap driver core"); > >> +MODULE_LICENSE("GPL"); > >> diff --git a/include/linux/gpio-regmap.h b/include/linux/gpio-regmap.h > >> new file mode 100644 > >> index 000000000000..a868cbcde6e9 > >> --- /dev/null > >> +++ b/include/linux/gpio-regmap.h > >> @@ -0,0 +1,69 @@ > >> +/* SPDX-License-Identifier: GPL-2.0-only */ > >> + > >> +#ifndef _LINUX_GPIO_REGMAP_H > >> +#define _LINUX_GPIO_REGMAP_H > >> + > >> +struct gpio_regmap; > >> + > >> +#define GPIO_REGMAP_ADDR_ZERO ((unsigned long)(-1)) > >> +#define GPIO_REGMAP_ADDR(addr) ((addr) ? : GPIO_REGMAP_ADDR_ZERO) > >> + > > > > What if the addr is actually 0? > > Then the driver has to set GPIO_REGMAP_ADDR_ZERO or use the convenience > macro GPIO_REGMAP_ADDR. > > So you can have > > struct gpio_regmap_config config = { 0 }; > config.reg_dat_base = 0x10; > config.reg_dir_out_base = 0x20; > > or > > config.reg_dat_base = GPIO_REGMAP_ADDR_ZERO; > > or if you can't be sure if the RHS value might be zero: > > config.reg_dat_base = GPIO_REGMAP_ADDR(reg); > > > > Maybe drop GPIO_REGMAP_ADDR and require users to set unused registers > > to GPIO_REGMAP_ADDR_ZERO? > > Thats bad because: > * you'd have to set plenty of unused base registers for a simple driver > * if there will be additional properties in the future, you have to > touch > all other drivers, because they are initialized as 0 (ie. valid reg > 0). > > >> +/** > >> + * struct gpio_regmap_config - Description of a generic regmap > >> gpio_chip. > >> + * > >> + * @parent: The parent device > >> + * @regmap: The regmap used to access the registers > >> + * given, the name of the device is used > >> + * @label: (Optional) Descriptive name for GPIO > >> controller. > >> + * If not given, the name of the device is used. > >> + * @ngpio: Number of GPIOs > >> + * @reg_dat_base: (Optional) (in) register base address > >> + * @reg_set_base: (Optional) set register base address > >> + * @reg_clr_base: (Optional) clear register base address > >> + * @reg_dir_in_base: (Optional) out setting register base address > >> + * @reg_dir_out_base: (Optional) in setting register base address > > > > The two above are inverted I think? > good catch. > > > Also: why the limitation of only supporting one at a time? > > they should be exclusive, either you have a register where you set the > output bits to one, or the input bits. Maybe this need a bit more > context > above. in gpio-mmio.c you can set both and both are used in > set_direction(), but only one is read in get_direction(). > > That being said, I have no strong opinion wether they should be > exclusive > or not, besides the symmetry of set_/get_direction(). > > -michael > Sorry for the late response, your comments make sense to me. Are you going to submit a v4 before the v5.8 merge window? Bart
Am 2020-05-25 11:05, schrieb Bartosz Golaszewski: > wt., 12 maj 2020 o 16:41 Michael Walle <michael@walle.cc> napisał(a): >> >> >> + >> >> +MODULE_AUTHOR("Michael Walle <michael@walle.cc>"); >> >> +MODULE_DESCRIPTION("GPIO generic regmap driver core"); >> >> +MODULE_LICENSE("GPL"); >> >> diff --git a/include/linux/gpio-regmap.h b/include/linux/gpio-regmap.h >> >> new file mode 100644 >> >> index 000000000000..a868cbcde6e9 >> >> --- /dev/null >> >> +++ b/include/linux/gpio-regmap.h >> >> @@ -0,0 +1,69 @@ >> >> +/* SPDX-License-Identifier: GPL-2.0-only */ >> >> + >> >> +#ifndef _LINUX_GPIO_REGMAP_H >> >> +#define _LINUX_GPIO_REGMAP_H >> >> + >> >> +struct gpio_regmap; >> >> + >> >> +#define GPIO_REGMAP_ADDR_ZERO ((unsigned long)(-1)) >> >> +#define GPIO_REGMAP_ADDR(addr) ((addr) ? : GPIO_REGMAP_ADDR_ZERO) >> >> + >> > >> > What if the addr is actually 0? >> >> Then the driver has to set GPIO_REGMAP_ADDR_ZERO or use the >> convenience >> macro GPIO_REGMAP_ADDR. >> >> So you can have >> >> struct gpio_regmap_config config = { 0 }; >> config.reg_dat_base = 0x10; >> config.reg_dir_out_base = 0x20; >> >> or >> >> config.reg_dat_base = GPIO_REGMAP_ADDR_ZERO; >> >> or if you can't be sure if the RHS value might be zero: >> >> config.reg_dat_base = GPIO_REGMAP_ADDR(reg); >> >> >> > Maybe drop GPIO_REGMAP_ADDR and require users to set unused registers >> > to GPIO_REGMAP_ADDR_ZERO? >> >> Thats bad because: >> * you'd have to set plenty of unused base registers for a simple >> driver >> * if there will be additional properties in the future, you have to >> touch >> all other drivers, because they are initialized as 0 (ie. valid >> reg >> 0). >> >> >> +/** >> >> + * struct gpio_regmap_config - Description of a generic regmap >> >> gpio_chip. >> >> + * >> >> + * @parent: The parent device >> >> + * @regmap: The regmap used to access the registers >> >> + * given, the name of the device is used >> >> + * @label: (Optional) Descriptive name for GPIO >> >> controller. >> >> + * If not given, the name of the device is used. >> >> + * @ngpio: Number of GPIOs >> >> + * @reg_dat_base: (Optional) (in) register base address >> >> + * @reg_set_base: (Optional) set register base address >> >> + * @reg_clr_base: (Optional) clear register base address >> >> + * @reg_dir_in_base: (Optional) out setting register base address >> >> + * @reg_dir_out_base: (Optional) in setting register base address >> > >> > The two above are inverted I think? >> good catch. >> >> > Also: why the limitation of only supporting one at a time? >> >> they should be exclusive, either you have a register where you set the >> output bits to one, or the input bits. Maybe this need a bit more >> context >> above. in gpio-mmio.c you can set both and both are used in >> set_direction(), but only one is read in get_direction(). >> >> That being said, I have no strong opinion wether they should be >> exclusive >> or not, besides the symmetry of set_/get_direction(). >> >> -michael >> > > Sorry for the late response, your comments make sense to me. Are you > going to submit a v4 before the v5.8 merge window? I'm currently stuck with how to handle the MFD part. Ie. Rob doesn't seem to like the logicial device numbering - or at least there wasn't an answer to that one anymore, see patch 5/16. If you like I could submit this patch on its own. But then there wouldn't be a user for it. -michael
On Mon, May 25, 2020 at 12:20 PM Michael Walle <michael@walle.cc> wrote: > If you like I could submit this patch on its own. But then there > wouldn't be a user for it. I'm pretty much fine with that, we do merge code that has no users if we anticipate they will be around the corner. Yours, Linus Walleij
On Mon, May 25, 2020 at 02:59:36PM +0200, Linus Walleij wrote: > On Mon, May 25, 2020 at 12:20 PM Michael Walle <michael@walle.cc> wrote: > > > If you like I could submit this patch on its own. But then there > > wouldn't be a user for it. > > I'm pretty much fine with that, we do merge code that has no > users if we anticipate they will be around the corner. I remember we discussed with Pierre to use it for his ASoC work. Pierre, does it sound useful for you?
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 8ef2179fb999..ae3a49a2e970 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -73,6 +73,10 @@ config GPIO_GENERIC depends on HAS_IOMEM # Only for IOMEM drivers tristate +config GPIO_REGMAP + depends on REGMAP + tristate + # put drivers in the right section, in alphabetical order # This symbol is selected by both I2C and SPI expanders diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index b2cfc21a97f3..93e139fdfa57 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o # Device drivers. Generally keep list sorted alphabetically +obj-$(CONFIG_GPIO_REGMAP) += gpio-regmap.o obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o # directly supported by gpio-generic diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c new file mode 100644 index 000000000000..04939c0a22f9 --- /dev/null +++ b/drivers/gpio/gpio-regmap.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * regmap based generic GPIO driver + * + * Copyright 2019 Michael Walle <michael@walle.cc> + */ + +#include <linux/gpio/driver.h> +#include <linux/gpio-regmap.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> + +struct gpio_regmap { + struct device *parent; + struct regmap *regmap; + struct gpio_chip gpio_chip; + + int reg_stride; + int ngpio_per_reg; + unsigned int reg_dat_base; + unsigned int reg_set_base; + unsigned int reg_clr_base; + unsigned int reg_dir_in_base; + unsigned int reg_dir_out_base; + + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base, + unsigned int offset, unsigned int *reg, + unsigned int *mask); + + void *driver_data; +}; + +static unsigned int gpio_regmap_addr(unsigned int addr) +{ + return (addr == GPIO_REGMAP_ADDR_ZERO) ? 0 : addr; +} + +/** + * gpio_regmap_simple_xlate() - translate base/offset to reg/mask + * + * Use a simple linear mapping to translate the offset to the bitmask. + */ +static int gpio_regmap_simple_xlate(struct gpio_regmap *gpio, + unsigned int base, unsigned int offset, + unsigned int *reg, unsigned int *mask) +{ + unsigned int line = offset % gpio->ngpio_per_reg; + unsigned int stride = offset / gpio->ngpio_per_reg; + + *reg = base + stride * gpio->reg_stride; + *mask = BIT(line); + + return 0; +} + +static int gpio_regmap_get(struct gpio_chip *chip, unsigned int offset) +{ + struct gpio_regmap *gpio = gpiochip_get_data(chip); + unsigned int base, val, reg, mask; + int ret; + + /* we might not have an output register if we are input only */ + if (gpio->reg_dat_base) + base = gpio_regmap_addr(gpio->reg_dat_base); + else + base = gpio_regmap_addr(gpio->reg_set_base); + + ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); + if (ret) + return ret; + + ret = regmap_read(gpio->regmap, reg, &val); + if (ret) + return ret; + + return (val & mask) ? 1 : 0; +} + +static void gpio_regmap_set(struct gpio_chip *chip, unsigned int offset, + int val) +{ + struct gpio_regmap *gpio = gpiochip_get_data(chip); + unsigned int base = gpio_regmap_addr(gpio->reg_set_base); + unsigned int reg, mask; + + gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); + if (val) + regmap_update_bits(gpio->regmap, reg, mask, mask); + else + regmap_update_bits(gpio->regmap, reg, mask, 0); +} + +static void gpio_regmap_set_with_clear(struct gpio_chip *chip, + unsigned int offset, int val) +{ + struct gpio_regmap *gpio = gpiochip_get_data(chip); + unsigned int base, reg, mask; + + if (val) + base = gpio_regmap_addr(gpio->reg_set_base); + else + base = gpio_regmap_addr(gpio->reg_clr_base); + + gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); + regmap_write(gpio->regmap, reg, mask); +} + +static int gpio_regmap_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct gpio_regmap *gpio = gpiochip_get_data(chip); + unsigned int base, val, reg, mask; + int invert, ret; + + if (gpio->reg_dir_out_base) { + base = gpio_regmap_addr(gpio->reg_dir_out_base); + invert = 0; + } else if (gpio->reg_dir_in_base) { + base = gpio_regmap_addr(gpio->reg_dir_in_base); + invert = 1; + } else { + return GPIO_LINE_DIRECTION_IN; + } + + ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); + if (ret) + return ret; + + ret = regmap_read(gpio->regmap, reg, &val); + if (ret) + return ret; + + if (!!(val & mask) ^ invert) + return GPIO_LINE_DIRECTION_OUT; + else + return GPIO_LINE_DIRECTION_IN; +} + +static int gpio_regmap_set_direction(struct gpio_chip *chip, + unsigned int offset, bool output) +{ + struct gpio_regmap *gpio = gpiochip_get_data(chip); + unsigned int base, val, reg, mask; + int invert, ret; + + if (gpio->reg_dir_out_base) { + base = gpio_regmap_addr(gpio->reg_dir_out_base); + invert = 0; + } else if (gpio->reg_dir_in_base) { + base = gpio_regmap_addr(gpio->reg_dir_in_base); + invert = 1; + } else { + return 0; + } + + ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask); + if (ret) + return ret; + + if (!invert) + val = (output) ? mask : 0; + else + val = (output) ? 0 : mask; + + return regmap_update_bits(gpio->regmap, reg, mask, val); +} + +static int gpio_regmap_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + return gpio_regmap_set_direction(chip, offset, false); +} + +static int gpio_regmap_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + gpio_regmap_set(chip, offset, value); + + return gpio_regmap_set_direction(chip, offset, true); +} + +void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data) +{ + gpio->driver_data = data; +} +EXPORT_SYMBOL_GPL(gpio_regmap_set_drvdata); + +void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio) +{ + return gpio->driver_data; +} +EXPORT_SYMBOL_GPL(gpio_regmap_get_drvdata); + +/** + * gpio_regmap_register() - Register a generic regmap GPIO controller + * + * @gpio: gpio_regmap device to register + * + * Returns 0 on success or an errno on failure. + */ +struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config) +{ + struct gpio_regmap *gpio; + struct gpio_chip *chip; + int ret; + + if (!config->parent) + return ERR_PTR(-EINVAL); + + if (!config->ngpio) + return ERR_PTR(-EINVAL); + + /* we need at least one */ + if (!config->reg_dat_base && !config->reg_set_base) + return ERR_PTR(-EINVAL); + + /* we don't support having both registers simulaniously for now */ + if (config->reg_dir_out_base && config->reg_dir_in_base) + return ERR_PTR(-EINVAL); + + gpio = kzalloc(sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return ERR_PTR(-ENOMEM); + + gpio->parent = config->parent; + gpio->regmap = config->regmap; + gpio->ngpio_per_reg = config->ngpio_per_reg; + gpio->reg_stride = config->reg_stride; + gpio->reg_mask_xlate = config->reg_mask_xlate; + gpio->reg_set_base = config->reg_set_base; + gpio->reg_clr_base = config->reg_clr_base; + gpio->reg_dir_in_base = config->reg_dir_in_base; + gpio->reg_dir_out_base = config->reg_dir_out_base; + + /* if not set, assume there is only one register */ + if (!gpio->ngpio_per_reg) + gpio->ngpio_per_reg = config->ngpio; + + /* if not set, assume they are consecutive */ + if (!gpio->reg_stride) + gpio->reg_stride = 1; + + if (!gpio->reg_mask_xlate) + gpio->reg_mask_xlate = gpio_regmap_simple_xlate; + + chip = &gpio->gpio_chip; + chip->parent = config->parent; + chip->base = -1; + chip->ngpio = config->ngpio; + chip->can_sleep = true; + + if (!chip->label) + chip->label = dev_name(config->parent); + else + chip->label = config->label; + + chip->get = gpio_regmap_get; + if (gpio->reg_set_base && gpio->reg_clr_base) + chip->set = gpio_regmap_set_with_clear; + else if (gpio->reg_set_base) + chip->set = gpio_regmap_set; + + if (gpio->reg_dir_in_base || gpio->reg_dir_out_base) { + chip->get_direction = gpio_regmap_get_direction; + chip->direction_input = gpio_regmap_direction_input; + chip->direction_output = gpio_regmap_direction_output; + } + + ret = gpiochip_add_data(chip, gpio); + if (ret < 0) { + kfree(gpio); + return ERR_PTR(ret); + } + + if (config->irq_domain) { + ret = gpiochip_irqchip_add_domain(chip, config->irq_domain); + if (ret < 0) + goto err; + } + + return gpio; + +err: + gpiochip_remove(chip); + kfree(gpio); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(gpio_regmap_register); + +/** + * gpio_regmap_unregister() - Unregister a generic regmap GPIO controller + * + * @gpio: gpio_regmap device to unregister + */ +void gpio_regmap_unregister(struct gpio_regmap *gpio) +{ + gpiochip_remove(&gpio->gpio_chip); + kfree(gpio); +} +EXPORT_SYMBOL_GPL(gpio_regmap_unregister); + +static void devm_gpio_regmap_unregister(struct device *dev, void *res) +{ + gpio_regmap_unregister(*(struct gpio_regmap **)res); +} + +/** + * devm_gpio_regmap_register() - resource managed gpio_regmap_register() + * + * @dev: device that is registering this GPIO device + * @gpio: gpio_regmap device to register + * + * Managed gpio_regmap_register(). For generic regmap GPIO device registered by + * this function, gpio_regmap_unregister() is automatically called on driver + * detach. See gpio_regmap_register() for more information. + */ +struct gpio_regmap *devm_gpio_regmap_register(struct device *dev, + const struct gpio_regmap_config *config) +{ + struct gpio_regmap **ptr, *gpio; + + ptr = devres_alloc(devm_gpio_regmap_unregister, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + gpio = gpio_regmap_register(config); + + if (!IS_ERR(gpio)) { + *ptr = gpio; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return gpio; +} +EXPORT_SYMBOL_GPL(devm_gpio_regmap_register); + +MODULE_AUTHOR("Michael Walle <michael@walle.cc>"); +MODULE_DESCRIPTION("GPIO generic regmap driver core"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/gpio-regmap.h b/include/linux/gpio-regmap.h new file mode 100644 index 000000000000..a868cbcde6e9 --- /dev/null +++ b/include/linux/gpio-regmap.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef _LINUX_GPIO_REGMAP_H +#define _LINUX_GPIO_REGMAP_H + +struct gpio_regmap; + +#define GPIO_REGMAP_ADDR_ZERO ((unsigned long)(-1)) +#define GPIO_REGMAP_ADDR(addr) ((addr) ? : GPIO_REGMAP_ADDR_ZERO) + +/** + * struct gpio_regmap_config - Description of a generic regmap gpio_chip. + * + * @parent: The parent device + * @regmap: The regmap used to access the registers + * given, the name of the device is used + * @label: (Optional) Descriptive name for GPIO controller. + * If not given, the name of the device is used. + * @ngpio: Number of GPIOs + * @reg_dat_base: (Optional) (in) register base address + * @reg_set_base: (Optional) set register base address + * @reg_clr_base: (Optional) clear register base address + * @reg_dir_in_base: (Optional) out setting register base address + * @reg_dir_out_base: (Optional) in setting register base address + * @reg_stride: (Optional) May be set if the registers (of the + * same type, dat, set, etc) are not consecutive. + * @ngpio_per_reg: Number of GPIOs per register + * @irq_domain: (Optional) IRQ domain if the controller is + * interrupt-capable + * @reg_mask_xlate: (Optional) Translates base address and GPIO + * offset to a register/bitmask pair. If not + * given the default gpio_regmap_simple_xlate() + * is used. + * + * The reg_mask_xlate translates a given base address and GPIO offset to + * register and mask pair. The base address is one of the given reg_*_base. + * + * All base addresses may have the special value GPIO_REGMAP_ADDR_ZERO + * which forces the address to the value 0. + */ +struct gpio_regmap_config { + struct device *parent; + struct regmap *regmap; + + const char *label; + int ngpio; + + unsigned int reg_dat_base; + unsigned int reg_set_base; + unsigned int reg_clr_base; + unsigned int reg_dir_in_base; + unsigned int reg_dir_out_base; + int reg_stride; + int ngpio_per_reg; + struct irq_domain *irq_domain; + + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base, + unsigned int offset, unsigned int *reg, + unsigned int *mask); +}; + +struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config); +void gpio_regmap_unregister(struct gpio_regmap *gpio); +struct gpio_regmap *devm_gpio_regmap_register(struct device *dev, + const struct gpio_regmap_config *config); +void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data); +void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio); + +#endif /* _LINUX_GPIO_REGMAP_H */
There are quite a lot simple GPIO controller which are using regmap to access the hardware. This driver tries to be a base to unify existing code into one place. This won't cover everything but it should be a good starting point. It does not implement its own irq_chip because there is already a generic one for regmap based devices. Instead, the irq_chip will be instantiated in the parent driver and its irq domain will be associate to this driver. For now it consists of the usual registers, like set (and an optional clear) data register, an input register and direction registers. Out-of-the-box, it supports consecutive register mappings and mappings where the registers have gaps between them with a linear mapping between GPIO offset and bit position. For weirder mappings the user can register its own .xlate(). Signed-off-by: Michael Walle <michael@walle.cc> --- drivers/gpio/Kconfig | 4 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-regmap.c | 343 ++++++++++++++++++++++++++++++++++++ include/linux/gpio-regmap.h | 69 ++++++++ 4 files changed, 417 insertions(+) create mode 100644 drivers/gpio/gpio-regmap.c create mode 100644 include/linux/gpio-regmap.h