| Message ID | 7102e1e3-bee6-7aa2-dce6-c0e7e0ce2983@redhat.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | fstests: more quota related tests | expand |
On Mon, May 18, 2020 at 03:00:11PM -0500, Eric Sandeen wrote: > From: Zorro Lang <zlang@redhat.com> > > Set different block & inode grace timers for user, group and project > quotas, then test softlimit enforcement timeout, make sure different > grace timers as expected. > > Signed-off-by: Zorro Lang <zlang@redhat.com> > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > --- I saw the following failure as well on xfs (as Zorro mentioned in his v3 patch) -pwrite: Disk quota exceeded +pwrite: No space left on device So this is an xfs issue that needs to be fixed? Just want to make sure the current expected test result. > common/quota | 4 + > tests/generic/600 | 187 ++++++++++++++++++++++++++++++++++++++++++ > tests/generic/600.out | 41 +++++++++ > tests/generic/group | 1 + > 4 files changed, 233 insertions(+) > create mode 100755 tests/generic/600 > create mode 100644 tests/generic/600.out > > diff --git a/common/quota b/common/quota > index 240e0bbc..1437d5f7 100644 > --- a/common/quota > +++ b/common/quota > @@ -217,6 +217,10 @@ _qmount() > if [ "$FSTYP" != "xfs" ]; then > quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1 > quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1 > + # try to turn on project quota if it's supported > + if quotaon --help 2>&1 | grep -q '\-\-project'; then > + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1 > + fi > fi > chmod ugo+rwx $SCRATCH_MNT > } > diff --git a/tests/generic/600 b/tests/generic/600 > new file mode 100755 > index 00000000..03b4dcb3 > --- /dev/null > +++ b/tests/generic/600 > @@ -0,0 +1,187 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. > +# > +# FS QA Test No. 600 > +# > +# Test per-type(user, group and project) filesystem quota timers, make sure > +# enforcement > +# > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + restore_project > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > +. ./common/quota > + > +# remove previous $seqres.full before test > +rm -f $seqres.full > + > +require_project() > +{ > + rm -f $tmp.projects $tmp.projid > + if [ -f /etc/projects ];then > + cat /etc/projects > $tmp.projects > + fi > + if [ -f /etc/projid ];then > + cat /etc/projid > $tmp.projid > + fi > + > + cat >/etc/projects <<EOF > +100:$SCRATCH_MNT/t > +EOF > + cat >/etc/projid <<EOF > +$qa_user:100 > +EOF > + PROJECT_CHANGED=1 > +} > + > +restore_project() > +{ > + if [ "$PROJECT_CHANGED" = "1" ];then > + rm -f /etc/projects /etc/projid > + if [ -f $tmp.projects ];then > + cat $tmp.projects > /etc/projects > + fi > + if [ -f $tmp.projid ];then > + cat $tmp.projid > /etc/projid > + fi > + fi > +} > + > +init_files() > +{ > + local dir=$1 > + > + echo "### Initialize files, and their mode and ownership" > + touch $dir/file{1,2} 2>/dev/null > + chown $qa_user $dir/file{1,2} 2>/dev/null > + chgrp $qa_user $dir/file{1,2} 2>/dev/null > + chmod 777 $dir 2>/dev/null > +} > + > +cleanup_files() > +{ > + echo "### Remove all files" > + rm -f ${1}/file{1,2,3,4,5,6} > +} > + > +test_grace() > +{ > + local type=$1 > + local dir=$2 > + local bgrace=$3 > + local igrace=$4 > + > + init_files $dir > + echo "--- Test block quota ---" > + # Firstly fit below block soft limit > + echo "Write 225 blocks..." > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \ > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > + _filter_xfs_io_error | tee -a $seqres.full > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > + # Secondly overcome block soft limit > + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..." > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \ > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > + _filter_xfs_io_error | tee -a $seqres.full > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > + # Reset grace time here, make below grace time test more accurate > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > + # Now sleep enough grace time and check that softlimit got enforced > + sleep $((bgrace + 1)) > + echo "Try to write 1 one more block after grace..." > + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \ > + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \ > + tee -a $seqres.full > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > + echo "--- Test inode quota ---" > + # And now the softlimit test for inodes > + # First reset space limits so that we don't have problems with > + # space reservations on XFS > + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT > + echo "Create 2 more files, over the inode softlimit..." > + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \ > + _filter_scratch | tee -a $seqres.full > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > + # Reset grace time here, make below grace time test more accurate > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > + # Wait and check grace time enforcement > + sleep $((igrace+1)) > + echo "Try to create one more inode after grace..." > + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full | > + _filter_scratch | tee -a $seqres.full > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > + cleanup_files $dir > +} > + > +# real QA test starts here > +_supported_fs generic > +_supported_os Linux > +_require_scratch > +_require_setquota_project > +_require_quota > +_require_user > +_require_group Hmm, also needs _require_scratch_xfs_crc when FSTYP is xfs, otherwise v4 xfs fails as +mount: /mnt/scratch: wrong fs type, bad option, bad superblock on /dev/mapper/testvg-lv2, missing codepage or helper program, or other error. +qmount failed and dmesg says XFS (dm-2): Super block does not support project and group quota together Thanks, Eryu > + > +_scratch_mkfs >$seqres.full 2>&1 > +_scratch_enable_pquota > +_qmount_option "usrquota,grpquota,prjquota" > +_qmount > +_require_prjquota $SCRATCH_DEV > +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT) > +rm -rf $SCRATCH_MNT/t > +mkdir $SCRATCH_MNT/t > +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t > +require_project > + > +echo "### Set up different grace timers to each type of quota" > +UBGRACE=12 > +UIGRACE=10 > +GBGRACE=4 > +GIGRACE=2 > +PBGRACE=8 > +PIGRACE=6 > + > +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT > +echo; echo "### Test user quota softlimit and grace time" > +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE > +# Reset the user quota space & inode limits, avoid it affect later test > +setquota -u $qa_user 0 0 0 0 $SCRATCH_MNT > + > +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT > +echo; echo "### Test group quota softlimit and grace time" > +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE > +# Reset the group quota space & inode limits, avoid it affect later test > +setquota -g $qa_user 0 0 0 0 $SCRATCH_MNT > + > +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT > +echo; echo "### Test project quota softlimit and grace time" > +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE > +# Reset the project quota space & inode limits > +setquota -P $qa_user 0 0 0 0 $SCRATCH_MNT > + > +# success, all done > +status=0 > +exit > diff --git a/tests/generic/600.out b/tests/generic/600.out > new file mode 100644 > index 00000000..6e15eaeb > --- /dev/null > +++ b/tests/generic/600.out > @@ -0,0 +1,41 @@ > +QA output created by 600 > +### Set up different grace timers to each type of quota > + > +### Test user quota softlimit and grace time > +### Initialize files, and their mode and ownership > +--- Test block quota --- > +Write 225 blocks... > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > +Try to write 1 one more block after grace... > +pwrite: Disk quota exceeded > +--- Test inode quota --- > +Create 2 more files, over the inode softlimit... > +Try to create one more inode after grace... > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > +### Remove all files > + > +### Test group quota softlimit and grace time > +### Initialize files, and their mode and ownership > +--- Test block quota --- > +Write 225 blocks... > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > +Try to write 1 one more block after grace... > +pwrite: Disk quota exceeded > +--- Test inode quota --- > +Create 2 more files, over the inode softlimit... > +Try to create one more inode after grace... > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > +### Remove all files > + > +### Test project quota softlimit and grace time > +### Initialize files, and their mode and ownership > +--- Test block quota --- > +Write 225 blocks... > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > +Try to write 1 one more block after grace... > +pwrite: Disk quota exceeded > +--- Test inode quota --- > +Create 2 more files, over the inode softlimit... > +Try to create one more inode after grace... > +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded > +### Remove all files
On Mon, Jun 01, 2020 at 12:15:17AM +0800, Eryu Guan wrote: > On Mon, May 18, 2020 at 03:00:11PM -0500, Eric Sandeen wrote: > > From: Zorro Lang <zlang@redhat.com> > > > > Set different block & inode grace timers for user, group and project > > quotas, then test softlimit enforcement timeout, make sure different > > grace timers as expected. > > > > Signed-off-by: Zorro Lang <zlang@redhat.com> > > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > > --- > > I saw the following failure as well on xfs (as Zorro mentioned in his v3 > patch) > > -pwrite: Disk quota exceeded > +pwrite: No space left on device > > So this is an xfs issue that needs to be fixed? Just want to make sure > the current expected test result. Hmm.... I think I'd better to filter ENOSPC|EDQUOT. I can't be sure all filesystems will return EDQUOT or ENOSPC 100%, especially for group and project quota. But I think Eric's trying to change a return value of XFS quota. I don't know the current status. Thanks, Zorro > > > common/quota | 4 + > > tests/generic/600 | 187 ++++++++++++++++++++++++++++++++++++++++++ > > tests/generic/600.out | 41 +++++++++ > > tests/generic/group | 1 + > > 4 files changed, 233 insertions(+) > > create mode 100755 tests/generic/600 > > create mode 100644 tests/generic/600.out > > > > diff --git a/common/quota b/common/quota > > index 240e0bbc..1437d5f7 100644 > > --- a/common/quota > > +++ b/common/quota > > @@ -217,6 +217,10 @@ _qmount() > > if [ "$FSTYP" != "xfs" ]; then > > quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1 > > quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1 > > + # try to turn on project quota if it's supported > > + if quotaon --help 2>&1 | grep -q '\-\-project'; then > > + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1 > > + fi > > fi > > chmod ugo+rwx $SCRATCH_MNT > > } > > diff --git a/tests/generic/600 b/tests/generic/600 > > new file mode 100755 > > index 00000000..03b4dcb3 > > --- /dev/null > > +++ b/tests/generic/600 > > @@ -0,0 +1,187 @@ > > +#! /bin/bash > > +# SPDX-License-Identifier: GPL-2.0 > > +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. > > +# > > +# FS QA Test No. 600 > > +# > > +# Test per-type(user, group and project) filesystem quota timers, make sure > > +# enforcement > > +# > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + restore_project > > + cd / > > + rm -f $tmp.* > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > +. ./common/filter > > +. ./common/quota > > + > > +# remove previous $seqres.full before test > > +rm -f $seqres.full > > + > > +require_project() > > +{ > > + rm -f $tmp.projects $tmp.projid > > + if [ -f /etc/projects ];then > > + cat /etc/projects > $tmp.projects > > + fi > > + if [ -f /etc/projid ];then > > + cat /etc/projid > $tmp.projid > > + fi > > + > > + cat >/etc/projects <<EOF > > +100:$SCRATCH_MNT/t > > +EOF > > + cat >/etc/projid <<EOF > > +$qa_user:100 > > +EOF > > + PROJECT_CHANGED=1 > > +} > > + > > +restore_project() > > +{ > > + if [ "$PROJECT_CHANGED" = "1" ];then > > + rm -f /etc/projects /etc/projid > > + if [ -f $tmp.projects ];then > > + cat $tmp.projects > /etc/projects > > + fi > > + if [ -f $tmp.projid ];then > > + cat $tmp.projid > /etc/projid > > + fi > > + fi > > +} > > + > > +init_files() > > +{ > > + local dir=$1 > > + > > + echo "### Initialize files, and their mode and ownership" > > + touch $dir/file{1,2} 2>/dev/null > > + chown $qa_user $dir/file{1,2} 2>/dev/null > > + chgrp $qa_user $dir/file{1,2} 2>/dev/null > > + chmod 777 $dir 2>/dev/null > > +} > > + > > +cleanup_files() > > +{ > > + echo "### Remove all files" > > + rm -f ${1}/file{1,2,3,4,5,6} > > +} > > + > > +test_grace() > > +{ > > + local type=$1 > > + local dir=$2 > > + local bgrace=$3 > > + local igrace=$4 > > + > > + init_files $dir > > + echo "--- Test block quota ---" > > + # Firstly fit below block soft limit > > + echo "Write 225 blocks..." > > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \ > > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > > + _filter_xfs_io_error | tee -a $seqres.full > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > + # Secondly overcome block soft limit > > + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..." > > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \ > > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > > + _filter_xfs_io_error | tee -a $seqres.full > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > + # Reset grace time here, make below grace time test more accurate > > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > > + # Now sleep enough grace time and check that softlimit got enforced > > + sleep $((bgrace + 1)) > > + echo "Try to write 1 one more block after grace..." > > + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \ > > + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \ > > + tee -a $seqres.full > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > + echo "--- Test inode quota ---" > > + # And now the softlimit test for inodes > > + # First reset space limits so that we don't have problems with > > + # space reservations on XFS > > + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT > > + echo "Create 2 more files, over the inode softlimit..." > > + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \ > > + _filter_scratch | tee -a $seqres.full > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > + # Reset grace time here, make below grace time test more accurate > > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > > + # Wait and check grace time enforcement > > + sleep $((igrace+1)) > > + echo "Try to create one more inode after grace..." > > + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full | > > + _filter_scratch | tee -a $seqres.full > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > + cleanup_files $dir > > +} > > + > > +# real QA test starts here > > +_supported_fs generic > > +_supported_os Linux > > +_require_scratch > > +_require_setquota_project > > +_require_quota > > +_require_user > > +_require_group > > Hmm, also needs _require_scratch_xfs_crc when FSTYP is xfs, otherwise v4 > xfs fails as > > +mount: /mnt/scratch: wrong fs type, bad option, bad superblock on /dev/mapper/testvg-lv2, missing codepage or helper program, or other error. > +qmount failed > > and dmesg says > > XFS (dm-2): Super block does not support project and group quota together > > Thanks, > Eryu > > > + > > +_scratch_mkfs >$seqres.full 2>&1 > > +_scratch_enable_pquota > > +_qmount_option "usrquota,grpquota,prjquota" > > +_qmount > > +_require_prjquota $SCRATCH_DEV > > +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT) > > +rm -rf $SCRATCH_MNT/t > > +mkdir $SCRATCH_MNT/t > > +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t > > +require_project > > + > > +echo "### Set up different grace timers to each type of quota" > > +UBGRACE=12 > > +UIGRACE=10 > > +GBGRACE=4 > > +GIGRACE=2 > > +PBGRACE=8 > > +PIGRACE=6 > > + > > +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT > > +echo; echo "### Test user quota softlimit and grace time" > > +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE > > +# Reset the user quota space & inode limits, avoid it affect later test > > +setquota -u $qa_user 0 0 0 0 $SCRATCH_MNT > > + > > +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT > > +echo; echo "### Test group quota softlimit and grace time" > > +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE > > +# Reset the group quota space & inode limits, avoid it affect later test > > +setquota -g $qa_user 0 0 0 0 $SCRATCH_MNT > > + > > +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT > > +echo; echo "### Test project quota softlimit and grace time" > > +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE > > +# Reset the project quota space & inode limits > > +setquota -P $qa_user 0 0 0 0 $SCRATCH_MNT > > + > > +# success, all done > > +status=0 > > +exit > > diff --git a/tests/generic/600.out b/tests/generic/600.out > > new file mode 100644 > > index 00000000..6e15eaeb > > --- /dev/null > > +++ b/tests/generic/600.out > > @@ -0,0 +1,41 @@ > > +QA output created by 600 > > +### Set up different grace timers to each type of quota > > + > > +### Test user quota softlimit and grace time > > +### Initialize files, and their mode and ownership > > +--- Test block quota --- > > +Write 225 blocks... > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > +Try to write 1 one more block after grace... > > +pwrite: Disk quota exceeded > > +--- Test inode quota --- > > +Create 2 more files, over the inode softlimit... > > +Try to create one more inode after grace... > > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > > +### Remove all files > > + > > +### Test group quota softlimit and grace time > > +### Initialize files, and their mode and ownership > > +--- Test block quota --- > > +Write 225 blocks... > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > +Try to write 1 one more block after grace... > > +pwrite: Disk quota exceeded > > +--- Test inode quota --- > > +Create 2 more files, over the inode softlimit... > > +Try to create one more inode after grace... > > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > > +### Remove all files > > + > > +### Test project quota softlimit and grace time > > +### Initialize files, and their mode and ownership > > +--- Test block quota --- > > +Write 225 blocks... > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > +Try to write 1 one more block after grace... > > +pwrite: Disk quota exceeded > > +--- Test inode quota --- > > +Create 2 more files, over the inode softlimit... > > +Try to create one more inode after grace... > > +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded > > +### Remove all files >
On 6/1/20 7:48 AM, Zorro Lang wrote: > On Mon, Jun 01, 2020 at 12:15:17AM +0800, Eryu Guan wrote: >> On Mon, May 18, 2020 at 03:00:11PM -0500, Eric Sandeen wrote: >>> From: Zorro Lang <zlang@redhat.com> >>> >>> Set different block & inode grace timers for user, group and project >>> quotas, then test softlimit enforcement timeout, make sure different >>> grace timers as expected. >>> >>> Signed-off-by: Zorro Lang <zlang@redhat.com> >>> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >>> --- >> >> I saw the following failure as well on xfs (as Zorro mentioned in his v3 >> patch) >> >> -pwrite: Disk quota exceeded >> +pwrite: No space left on device >> >> So this is an xfs issue that needs to be fixed? Just want to make sure >> the current expected test result. > > Hmm.... I think I'd better to filter ENOSPC|EDQUOT. I can't be sure all > filesystems will return EDQUOT or ENOSPC 100%, especially for group and project > quota. > > But I think Eric's trying to change a return value of XFS quota. I don't know the > current status. This test will need to be updated, it sounds like ext4 does not plan to switch to ENOSPC for project quota, so we'll need modify it to accept either one. Zorro, didn't you do that for another test? Maybe you can do the same here? Thanks, -Eric
On Mon, Jun 01, 2020 at 08:48:44PM +0800, Zorro Lang wrote: > On Mon, Jun 01, 2020 at 12:15:17AM +0800, Eryu Guan wrote: > > On Mon, May 18, 2020 at 03:00:11PM -0500, Eric Sandeen wrote: > > > From: Zorro Lang <zlang@redhat.com> > > > > > > Set different block & inode grace timers for user, group and project > > > quotas, then test softlimit enforcement timeout, make sure different > > > grace timers as expected. > > > > > > Signed-off-by: Zorro Lang <zlang@redhat.com> > > > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > > > --- > > > > I saw the following failure as well on xfs (as Zorro mentioned in his v3 > > patch) > > > > -pwrite: Disk quota exceeded > > +pwrite: No space left on device > > > > So this is an xfs issue that needs to be fixed? Just want to make sure > > the current expected test result. > > Hmm.... I think I'd better to filter ENOSPC|EDQUOT. I can't be sure all > filesystems will return EDQUOT or ENOSPC 100%, especially for group and project > quota. > > But I think Eric's trying to change a return value of XFS quota. I don't know the > current status. Yeah, Eric fixed a few problems where a group quota overage would return ENOSPC instead of EDQUOT; and a few more problems where a project quota overage would return EDQUOT instead of ENOSPC. That'll be coming in the 5.8 merge, which I should get on... --D > Thanks, > Zorro > > > > > > common/quota | 4 + > > > tests/generic/600 | 187 ++++++++++++++++++++++++++++++++++++++++++ > > > tests/generic/600.out | 41 +++++++++ > > > tests/generic/group | 1 + > > > 4 files changed, 233 insertions(+) > > > create mode 100755 tests/generic/600 > > > create mode 100644 tests/generic/600.out > > > > > > diff --git a/common/quota b/common/quota > > > index 240e0bbc..1437d5f7 100644 > > > --- a/common/quota > > > +++ b/common/quota > > > @@ -217,6 +217,10 @@ _qmount() > > > if [ "$FSTYP" != "xfs" ]; then > > > quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1 > > > quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1 > > > + # try to turn on project quota if it's supported > > > + if quotaon --help 2>&1 | grep -q '\-\-project'; then > > > + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1 > > > + fi > > > fi > > > chmod ugo+rwx $SCRATCH_MNT > > > } > > > diff --git a/tests/generic/600 b/tests/generic/600 > > > new file mode 100755 > > > index 00000000..03b4dcb3 > > > --- /dev/null > > > +++ b/tests/generic/600 > > > @@ -0,0 +1,187 @@ > > > +#! /bin/bash > > > +# SPDX-License-Identifier: GPL-2.0 > > > +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. > > > +# > > > +# FS QA Test No. 600 > > > +# > > > +# Test per-type(user, group and project) filesystem quota timers, make sure > > > +# enforcement > > > +# > > > +seq=`basename $0` > > > +seqres=$RESULT_DIR/$seq > > > +echo "QA output created by $seq" > > > + > > > +here=`pwd` > > > +tmp=/tmp/$$ > > > +status=1 # failure is the default! > > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > > + > > > +_cleanup() > > > +{ > > > + restore_project > > > + cd / > > > + rm -f $tmp.* > > > +} > > > + > > > +# get standard environment, filters and checks > > > +. ./common/rc > > > +. ./common/filter > > > +. ./common/quota > > > + > > > +# remove previous $seqres.full before test > > > +rm -f $seqres.full > > > + > > > +require_project() > > > +{ > > > + rm -f $tmp.projects $tmp.projid > > > + if [ -f /etc/projects ];then > > > + cat /etc/projects > $tmp.projects > > > + fi > > > + if [ -f /etc/projid ];then > > > + cat /etc/projid > $tmp.projid > > > + fi > > > + > > > + cat >/etc/projects <<EOF > > > +100:$SCRATCH_MNT/t > > > +EOF > > > + cat >/etc/projid <<EOF > > > +$qa_user:100 > > > +EOF > > > + PROJECT_CHANGED=1 > > > +} > > > + > > > +restore_project() > > > +{ > > > + if [ "$PROJECT_CHANGED" = "1" ];then > > > + rm -f /etc/projects /etc/projid > > > + if [ -f $tmp.projects ];then > > > + cat $tmp.projects > /etc/projects > > > + fi > > > + if [ -f $tmp.projid ];then > > > + cat $tmp.projid > /etc/projid > > > + fi > > > + fi > > > +} > > > + > > > +init_files() > > > +{ > > > + local dir=$1 > > > + > > > + echo "### Initialize files, and their mode and ownership" > > > + touch $dir/file{1,2} 2>/dev/null > > > + chown $qa_user $dir/file{1,2} 2>/dev/null > > > + chgrp $qa_user $dir/file{1,2} 2>/dev/null > > > + chmod 777 $dir 2>/dev/null > > > +} > > > + > > > +cleanup_files() > > > +{ > > > + echo "### Remove all files" > > > + rm -f ${1}/file{1,2,3,4,5,6} > > > +} > > > + > > > +test_grace() > > > +{ > > > + local type=$1 > > > + local dir=$2 > > > + local bgrace=$3 > > > + local igrace=$4 > > > + > > > + init_files $dir > > > + echo "--- Test block quota ---" > > > + # Firstly fit below block soft limit > > > + echo "Write 225 blocks..." > > > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \ > > > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > > > + _filter_xfs_io_error | tee -a $seqres.full > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > + # Secondly overcome block soft limit > > > + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..." > > > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \ > > > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > > > + _filter_xfs_io_error | tee -a $seqres.full > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > + # Reset grace time here, make below grace time test more accurate > > > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > > > + # Now sleep enough grace time and check that softlimit got enforced > > > + sleep $((bgrace + 1)) > > > + echo "Try to write 1 one more block after grace..." > > > + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \ > > > + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \ > > > + tee -a $seqres.full > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > + echo "--- Test inode quota ---" > > > + # And now the softlimit test for inodes > > > + # First reset space limits so that we don't have problems with > > > + # space reservations on XFS > > > + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT > > > + echo "Create 2 more files, over the inode softlimit..." > > > + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \ > > > + _filter_scratch | tee -a $seqres.full > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > + # Reset grace time here, make below grace time test more accurate > > > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > > > + # Wait and check grace time enforcement > > > + sleep $((igrace+1)) > > > + echo "Try to create one more inode after grace..." > > > + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full | > > > + _filter_scratch | tee -a $seqres.full > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > + cleanup_files $dir > > > +} > > > + > > > +# real QA test starts here > > > +_supported_fs generic > > > +_supported_os Linux > > > +_require_scratch > > > +_require_setquota_project > > > +_require_quota > > > +_require_user > > > +_require_group > > > > Hmm, also needs _require_scratch_xfs_crc when FSTYP is xfs, otherwise v4 > > xfs fails as > > > > +mount: /mnt/scratch: wrong fs type, bad option, bad superblock on /dev/mapper/testvg-lv2, missing codepage or helper program, or other error. > > +qmount failed > > > > and dmesg says > > > > XFS (dm-2): Super block does not support project and group quota together > > > > Thanks, > > Eryu > > > > > + > > > +_scratch_mkfs >$seqres.full 2>&1 > > > +_scratch_enable_pquota > > > +_qmount_option "usrquota,grpquota,prjquota" > > > +_qmount > > > +_require_prjquota $SCRATCH_DEV > > > +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT) > > > +rm -rf $SCRATCH_MNT/t > > > +mkdir $SCRATCH_MNT/t > > > +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t > > > +require_project > > > + > > > +echo "### Set up different grace timers to each type of quota" > > > +UBGRACE=12 > > > +UIGRACE=10 > > > +GBGRACE=4 > > > +GIGRACE=2 > > > +PBGRACE=8 > > > +PIGRACE=6 > > > + > > > +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > > +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT > > > +echo; echo "### Test user quota softlimit and grace time" > > > +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE > > > +# Reset the user quota space & inode limits, avoid it affect later test > > > +setquota -u $qa_user 0 0 0 0 $SCRATCH_MNT > > > + > > > +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > > +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT > > > +echo; echo "### Test group quota softlimit and grace time" > > > +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE > > > +# Reset the group quota space & inode limits, avoid it affect later test > > > +setquota -g $qa_user 0 0 0 0 $SCRATCH_MNT > > > + > > > +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > > +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT > > > +echo; echo "### Test project quota softlimit and grace time" > > > +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE > > > +# Reset the project quota space & inode limits > > > +setquota -P $qa_user 0 0 0 0 $SCRATCH_MNT > > > + > > > +# success, all done > > > +status=0 > > > +exit > > > diff --git a/tests/generic/600.out b/tests/generic/600.out > > > new file mode 100644 > > > index 00000000..6e15eaeb > > > --- /dev/null > > > +++ b/tests/generic/600.out > > > @@ -0,0 +1,41 @@ > > > +QA output created by 600 > > > +### Set up different grace timers to each type of quota > > > + > > > +### Test user quota softlimit and grace time > > > +### Initialize files, and their mode and ownership > > > +--- Test block quota --- > > > +Write 225 blocks... > > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > > +Try to write 1 one more block after grace... > > > +pwrite: Disk quota exceeded > > > +--- Test inode quota --- > > > +Create 2 more files, over the inode softlimit... > > > +Try to create one more inode after grace... > > > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > > > +### Remove all files > > > + > > > +### Test group quota softlimit and grace time > > > +### Initialize files, and their mode and ownership > > > +--- Test block quota --- > > > +Write 225 blocks... > > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > > +Try to write 1 one more block after grace... > > > +pwrite: Disk quota exceeded > > > +--- Test inode quota --- > > > +Create 2 more files, over the inode softlimit... > > > +Try to create one more inode after grace... > > > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > > > +### Remove all files > > > + > > > +### Test project quota softlimit and grace time > > > +### Initialize files, and their mode and ownership > > > +--- Test block quota --- > > > +Write 225 blocks... > > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > > +Try to write 1 one more block after grace... > > > +pwrite: Disk quota exceeded > > > +--- Test inode quota --- > > > +Create 2 more files, over the inode softlimit... > > > +Try to create one more inode after grace... > > > +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded > > > +### Remove all files > > >
On Mon, Jun 01, 2020 at 09:39:57AM -0700, Darrick J. Wong wrote: > On Mon, Jun 01, 2020 at 08:48:44PM +0800, Zorro Lang wrote: > > On Mon, Jun 01, 2020 at 12:15:17AM +0800, Eryu Guan wrote: > > > On Mon, May 18, 2020 at 03:00:11PM -0500, Eric Sandeen wrote: > > > > From: Zorro Lang <zlang@redhat.com> > > > > > > > > Set different block & inode grace timers for user, group and project > > > > quotas, then test softlimit enforcement timeout, make sure different > > > > grace timers as expected. > > > > > > > > Signed-off-by: Zorro Lang <zlang@redhat.com> > > > > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > > > > --- > > > > > > I saw the following failure as well on xfs (as Zorro mentioned in his v3 > > > patch) > > > > > > -pwrite: Disk quota exceeded > > > +pwrite: No space left on device > > > > > > So this is an xfs issue that needs to be fixed? Just want to make sure > > > the current expected test result. > > > > Hmm.... I think I'd better to filter ENOSPC|EDQUOT. I can't be sure all > > filesystems will return EDQUOT or ENOSPC 100%, especially for group and project > > quota. > > > > But I think Eric's trying to change a return value of XFS quota. I don't know the > > current status. > > Yeah, Eric fixed a few problems where a group quota overage would return > ENOSPC instead of EDQUOT; and a few more problems where a project quota > overage would return EDQUOT instead of ENOSPC. > > That'll be coming in the 5.8 merge, which I should get on... To make sure I don't misunderstand, so the expected output is as below? 1) User quota test: pwrite: Disk quota exceeded 2) Group quota test: pwrite: Disk quota exceeded 3) Project quota test: pwrite: No space left on device / Disk quota exceeded (need a filter) Thanks, Zorro > > --D > > > Thanks, > > Zorro > > > > > > > > > common/quota | 4 + > > > > tests/generic/600 | 187 ++++++++++++++++++++++++++++++++++++++++++ > > > > tests/generic/600.out | 41 +++++++++ > > > > tests/generic/group | 1 + > > > > 4 files changed, 233 insertions(+) > > > > create mode 100755 tests/generic/600 > > > > create mode 100644 tests/generic/600.out > > > > > > > > diff --git a/common/quota b/common/quota > > > > index 240e0bbc..1437d5f7 100644 > > > > --- a/common/quota > > > > +++ b/common/quota > > > > @@ -217,6 +217,10 @@ _qmount() > > > > if [ "$FSTYP" != "xfs" ]; then > > > > quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1 > > > > quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1 > > > > + # try to turn on project quota if it's supported > > > > + if quotaon --help 2>&1 | grep -q '\-\-project'; then > > > > + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1 > > > > + fi > > > > fi > > > > chmod ugo+rwx $SCRATCH_MNT > > > > } > > > > diff --git a/tests/generic/600 b/tests/generic/600 > > > > new file mode 100755 > > > > index 00000000..03b4dcb3 > > > > --- /dev/null > > > > +++ b/tests/generic/600 > > > > @@ -0,0 +1,187 @@ > > > > +#! /bin/bash > > > > +# SPDX-License-Identifier: GPL-2.0 > > > > +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. > > > > +# > > > > +# FS QA Test No. 600 > > > > +# > > > > +# Test per-type(user, group and project) filesystem quota timers, make sure > > > > +# enforcement > > > > +# > > > > +seq=`basename $0` > > > > +seqres=$RESULT_DIR/$seq > > > > +echo "QA output created by $seq" > > > > + > > > > +here=`pwd` > > > > +tmp=/tmp/$$ > > > > +status=1 # failure is the default! > > > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > > > + > > > > +_cleanup() > > > > +{ > > > > + restore_project > > > > + cd / > > > > + rm -f $tmp.* > > > > +} > > > > + > > > > +# get standard environment, filters and checks > > > > +. ./common/rc > > > > +. ./common/filter > > > > +. ./common/quota > > > > + > > > > +# remove previous $seqres.full before test > > > > +rm -f $seqres.full > > > > + > > > > +require_project() > > > > +{ > > > > + rm -f $tmp.projects $tmp.projid > > > > + if [ -f /etc/projects ];then > > > > + cat /etc/projects > $tmp.projects > > > > + fi > > > > + if [ -f /etc/projid ];then > > > > + cat /etc/projid > $tmp.projid > > > > + fi > > > > + > > > > + cat >/etc/projects <<EOF > > > > +100:$SCRATCH_MNT/t > > > > +EOF > > > > + cat >/etc/projid <<EOF > > > > +$qa_user:100 > > > > +EOF > > > > + PROJECT_CHANGED=1 > > > > +} > > > > + > > > > +restore_project() > > > > +{ > > > > + if [ "$PROJECT_CHANGED" = "1" ];then > > > > + rm -f /etc/projects /etc/projid > > > > + if [ -f $tmp.projects ];then > > > > + cat $tmp.projects > /etc/projects > > > > + fi > > > > + if [ -f $tmp.projid ];then > > > > + cat $tmp.projid > /etc/projid > > > > + fi > > > > + fi > > > > +} > > > > + > > > > +init_files() > > > > +{ > > > > + local dir=$1 > > > > + > > > > + echo "### Initialize files, and their mode and ownership" > > > > + touch $dir/file{1,2} 2>/dev/null > > > > + chown $qa_user $dir/file{1,2} 2>/dev/null > > > > + chgrp $qa_user $dir/file{1,2} 2>/dev/null > > > > + chmod 777 $dir 2>/dev/null > > > > +} > > > > + > > > > +cleanup_files() > > > > +{ > > > > + echo "### Remove all files" > > > > + rm -f ${1}/file{1,2,3,4,5,6} > > > > +} > > > > + > > > > +test_grace() > > > > +{ > > > > + local type=$1 > > > > + local dir=$2 > > > > + local bgrace=$3 > > > > + local igrace=$4 > > > > + > > > > + init_files $dir > > > > + echo "--- Test block quota ---" > > > > + # Firstly fit below block soft limit > > > > + echo "Write 225 blocks..." > > > > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \ > > > > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > > > > + _filter_xfs_io_error | tee -a $seqres.full > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > + # Secondly overcome block soft limit > > > > + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..." > > > > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \ > > > > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > > > > + _filter_xfs_io_error | tee -a $seqres.full > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > + # Reset grace time here, make below grace time test more accurate > > > > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > > > > + # Now sleep enough grace time and check that softlimit got enforced > > > > + sleep $((bgrace + 1)) > > > > + echo "Try to write 1 one more block after grace..." > > > > + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \ > > > > + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \ > > > > + tee -a $seqres.full > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > + echo "--- Test inode quota ---" > > > > + # And now the softlimit test for inodes > > > > + # First reset space limits so that we don't have problems with > > > > + # space reservations on XFS > > > > + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT > > > > + echo "Create 2 more files, over the inode softlimit..." > > > > + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \ > > > > + _filter_scratch | tee -a $seqres.full > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > + # Reset grace time here, make below grace time test more accurate > > > > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > > > > + # Wait and check grace time enforcement > > > > + sleep $((igrace+1)) > > > > + echo "Try to create one more inode after grace..." > > > > + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full | > > > > + _filter_scratch | tee -a $seqres.full > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > + cleanup_files $dir > > > > +} > > > > + > > > > +# real QA test starts here > > > > +_supported_fs generic > > > > +_supported_os Linux > > > > +_require_scratch > > > > +_require_setquota_project > > > > +_require_quota > > > > +_require_user > > > > +_require_group > > > > > > Hmm, also needs _require_scratch_xfs_crc when FSTYP is xfs, otherwise v4 > > > xfs fails as > > > > > > +mount: /mnt/scratch: wrong fs type, bad option, bad superblock on /dev/mapper/testvg-lv2, missing codepage or helper program, or other error. > > > +qmount failed > > > > > > and dmesg says > > > > > > XFS (dm-2): Super block does not support project and group quota together > > > > > > Thanks, > > > Eryu > > > > > > > + > > > > +_scratch_mkfs >$seqres.full 2>&1 > > > > +_scratch_enable_pquota > > > > +_qmount_option "usrquota,grpquota,prjquota" > > > > +_qmount > > > > +_require_prjquota $SCRATCH_DEV > > > > +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT) > > > > +rm -rf $SCRATCH_MNT/t > > > > +mkdir $SCRATCH_MNT/t > > > > +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t > > > > +require_project > > > > + > > > > +echo "### Set up different grace timers to each type of quota" > > > > +UBGRACE=12 > > > > +UIGRACE=10 > > > > +GBGRACE=4 > > > > +GIGRACE=2 > > > > +PBGRACE=8 > > > > +PIGRACE=6 > > > > + > > > > +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > > > +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT > > > > +echo; echo "### Test user quota softlimit and grace time" > > > > +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE > > > > +# Reset the user quota space & inode limits, avoid it affect later test > > > > +setquota -u $qa_user 0 0 0 0 $SCRATCH_MNT > > > > + > > > > +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > > > +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT > > > > +echo; echo "### Test group quota softlimit and grace time" > > > > +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE > > > > +# Reset the group quota space & inode limits, avoid it affect later test > > > > +setquota -g $qa_user 0 0 0 0 $SCRATCH_MNT > > > > + > > > > +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > > > +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT > > > > +echo; echo "### Test project quota softlimit and grace time" > > > > +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE > > > > +# Reset the project quota space & inode limits > > > > +setquota -P $qa_user 0 0 0 0 $SCRATCH_MNT > > > > + > > > > +# success, all done > > > > +status=0 > > > > +exit > > > > diff --git a/tests/generic/600.out b/tests/generic/600.out > > > > new file mode 100644 > > > > index 00000000..6e15eaeb > > > > --- /dev/null > > > > +++ b/tests/generic/600.out > > > > @@ -0,0 +1,41 @@ > > > > +QA output created by 600 > > > > +### Set up different grace timers to each type of quota > > > > + > > > > +### Test user quota softlimit and grace time > > > > +### Initialize files, and their mode and ownership > > > > +--- Test block quota --- > > > > +Write 225 blocks... > > > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > > > +Try to write 1 one more block after grace... > > > > +pwrite: Disk quota exceeded > > > > +--- Test inode quota --- > > > > +Create 2 more files, over the inode softlimit... > > > > +Try to create one more inode after grace... > > > > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > > > > +### Remove all files > > > > + > > > > +### Test group quota softlimit and grace time > > > > +### Initialize files, and their mode and ownership > > > > +--- Test block quota --- > > > > +Write 225 blocks... > > > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > > > +Try to write 1 one more block after grace... > > > > +pwrite: Disk quota exceeded > > > > +--- Test inode quota --- > > > > +Create 2 more files, over the inode softlimit... > > > > +Try to create one more inode after grace... > > > > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > > > > +### Remove all files > > > > + > > > > +### Test project quota softlimit and grace time > > > > +### Initialize files, and their mode and ownership > > > > +--- Test block quota --- > > > > +Write 225 blocks... > > > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > > > +Try to write 1 one more block after grace... > > > > +pwrite: Disk quota exceeded > > > > +--- Test inode quota --- > > > > +Create 2 more files, over the inode softlimit... > > > > +Try to create one more inode after grace... > > > > +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded > > > > +### Remove all files > > > > > >
On Thu, Jun 11, 2020 at 01:12:43PM +0800, Zorro Lang wrote: > On Mon, Jun 01, 2020 at 09:39:57AM -0700, Darrick J. Wong wrote: > > On Mon, Jun 01, 2020 at 08:48:44PM +0800, Zorro Lang wrote: > > > On Mon, Jun 01, 2020 at 12:15:17AM +0800, Eryu Guan wrote: > > > > On Mon, May 18, 2020 at 03:00:11PM -0500, Eric Sandeen wrote: > > > > > From: Zorro Lang <zlang@redhat.com> > > > > > > > > > > Set different block & inode grace timers for user, group and project > > > > > quotas, then test softlimit enforcement timeout, make sure different > > > > > grace timers as expected. > > > > > > > > > > Signed-off-by: Zorro Lang <zlang@redhat.com> > > > > > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > > > > > --- > > > > > > > > I saw the following failure as well on xfs (as Zorro mentioned in his v3 > > > > patch) > > > > > > > > -pwrite: Disk quota exceeded > > > > +pwrite: No space left on device > > > > > > > > So this is an xfs issue that needs to be fixed? Just want to make sure > > > > the current expected test result. > > > > > > Hmm.... I think I'd better to filter ENOSPC|EDQUOT. I can't be sure all > > > filesystems will return EDQUOT or ENOSPC 100%, especially for group and project > > > quota. > > > > > > But I think Eric's trying to change a return value of XFS quota. I don't know the > > > current status. > > > > Yeah, Eric fixed a few problems where a group quota overage would return > > ENOSPC instead of EDQUOT; and a few more problems where a project quota > > overage would return EDQUOT instead of ENOSPC. > > > > That'll be coming in the 5.8 merge, which I should get on... > > To make sure I don't misunderstand, so the expected output is as below? > 1) User quota test: > pwrite: Disk quota exceeded > > 2) Group quota test: > pwrite: Disk quota exceeded > > 3) Project quota test: > pwrite: No space left on device / Disk quota exceeded (need a filter) Yes, that's my understanding of the *intended* behavior. :) --D > Thanks, > Zorro > > > > > --D > > > > > Thanks, > > > Zorro > > > > > > > > > > > > common/quota | 4 + > > > > > tests/generic/600 | 187 ++++++++++++++++++++++++++++++++++++++++++ > > > > > tests/generic/600.out | 41 +++++++++ > > > > > tests/generic/group | 1 + > > > > > 4 files changed, 233 insertions(+) > > > > > create mode 100755 tests/generic/600 > > > > > create mode 100644 tests/generic/600.out > > > > > > > > > > diff --git a/common/quota b/common/quota > > > > > index 240e0bbc..1437d5f7 100644 > > > > > --- a/common/quota > > > > > +++ b/common/quota > > > > > @@ -217,6 +217,10 @@ _qmount() > > > > > if [ "$FSTYP" != "xfs" ]; then > > > > > quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1 > > > > > quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1 > > > > > + # try to turn on project quota if it's supported > > > > > + if quotaon --help 2>&1 | grep -q '\-\-project'; then > > > > > + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1 > > > > > + fi > > > > > fi > > > > > chmod ugo+rwx $SCRATCH_MNT > > > > > } > > > > > diff --git a/tests/generic/600 b/tests/generic/600 > > > > > new file mode 100755 > > > > > index 00000000..03b4dcb3 > > > > > --- /dev/null > > > > > +++ b/tests/generic/600 > > > > > @@ -0,0 +1,187 @@ > > > > > +#! /bin/bash > > > > > +# SPDX-License-Identifier: GPL-2.0 > > > > > +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. > > > > > +# > > > > > +# FS QA Test No. 600 > > > > > +# > > > > > +# Test per-type(user, group and project) filesystem quota timers, make sure > > > > > +# enforcement > > > > > +# > > > > > +seq=`basename $0` > > > > > +seqres=$RESULT_DIR/$seq > > > > > +echo "QA output created by $seq" > > > > > + > > > > > +here=`pwd` > > > > > +tmp=/tmp/$$ > > > > > +status=1 # failure is the default! > > > > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > > > > + > > > > > +_cleanup() > > > > > +{ > > > > > + restore_project > > > > > + cd / > > > > > + rm -f $tmp.* > > > > > +} > > > > > + > > > > > +# get standard environment, filters and checks > > > > > +. ./common/rc > > > > > +. ./common/filter > > > > > +. ./common/quota > > > > > + > > > > > +# remove previous $seqres.full before test > > > > > +rm -f $seqres.full > > > > > + > > > > > +require_project() > > > > > +{ > > > > > + rm -f $tmp.projects $tmp.projid > > > > > + if [ -f /etc/projects ];then > > > > > + cat /etc/projects > $tmp.projects > > > > > + fi > > > > > + if [ -f /etc/projid ];then > > > > > + cat /etc/projid > $tmp.projid > > > > > + fi > > > > > + > > > > > + cat >/etc/projects <<EOF > > > > > +100:$SCRATCH_MNT/t > > > > > +EOF > > > > > + cat >/etc/projid <<EOF > > > > > +$qa_user:100 > > > > > +EOF > > > > > + PROJECT_CHANGED=1 > > > > > +} > > > > > + > > > > > +restore_project() > > > > > +{ > > > > > + if [ "$PROJECT_CHANGED" = "1" ];then > > > > > + rm -f /etc/projects /etc/projid > > > > > + if [ -f $tmp.projects ];then > > > > > + cat $tmp.projects > /etc/projects > > > > > + fi > > > > > + if [ -f $tmp.projid ];then > > > > > + cat $tmp.projid > /etc/projid > > > > > + fi > > > > > + fi > > > > > +} > > > > > + > > > > > +init_files() > > > > > +{ > > > > > + local dir=$1 > > > > > + > > > > > + echo "### Initialize files, and their mode and ownership" > > > > > + touch $dir/file{1,2} 2>/dev/null > > > > > + chown $qa_user $dir/file{1,2} 2>/dev/null > > > > > + chgrp $qa_user $dir/file{1,2} 2>/dev/null > > > > > + chmod 777 $dir 2>/dev/null > > > > > +} > > > > > + > > > > > +cleanup_files() > > > > > +{ > > > > > + echo "### Remove all files" > > > > > + rm -f ${1}/file{1,2,3,4,5,6} > > > > > +} > > > > > + > > > > > +test_grace() > > > > > +{ > > > > > + local type=$1 > > > > > + local dir=$2 > > > > > + local bgrace=$3 > > > > > + local igrace=$4 > > > > > + > > > > > + init_files $dir > > > > > + echo "--- Test block quota ---" > > > > > + # Firstly fit below block soft limit > > > > > + echo "Write 225 blocks..." > > > > > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \ > > > > > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > > > > > + _filter_xfs_io_error | tee -a $seqres.full > > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > > + # Secondly overcome block soft limit > > > > > + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..." > > > > > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \ > > > > > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ > > > > > + _filter_xfs_io_error | tee -a $seqres.full > > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > > + # Reset grace time here, make below grace time test more accurate > > > > > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > > > > > + # Now sleep enough grace time and check that softlimit got enforced > > > > > + sleep $((bgrace + 1)) > > > > > + echo "Try to write 1 one more block after grace..." > > > > > + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \ > > > > > + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \ > > > > > + tee -a $seqres.full > > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > > + echo "--- Test inode quota ---" > > > > > + # And now the softlimit test for inodes > > > > > + # First reset space limits so that we don't have problems with > > > > > + # space reservations on XFS > > > > > + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT > > > > > + echo "Create 2 more files, over the inode softlimit..." > > > > > + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \ > > > > > + _filter_scratch | tee -a $seqres.full > > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > > + # Reset grace time here, make below grace time test more accurate > > > > > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null > > > > > + # Wait and check grace time enforcement > > > > > + sleep $((igrace+1)) > > > > > + echo "Try to create one more inode after grace..." > > > > > + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full | > > > > > + _filter_scratch | tee -a $seqres.full > > > > > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > > > > > + cleanup_files $dir > > > > > +} > > > > > + > > > > > +# real QA test starts here > > > > > +_supported_fs generic > > > > > +_supported_os Linux > > > > > +_require_scratch > > > > > +_require_setquota_project > > > > > +_require_quota > > > > > +_require_user > > > > > +_require_group > > > > > > > > Hmm, also needs _require_scratch_xfs_crc when FSTYP is xfs, otherwise v4 > > > > xfs fails as > > > > > > > > +mount: /mnt/scratch: wrong fs type, bad option, bad superblock on /dev/mapper/testvg-lv2, missing codepage or helper program, or other error. > > > > +qmount failed > > > > > > > > and dmesg says > > > > > > > > XFS (dm-2): Super block does not support project and group quota together > > > > > > > > Thanks, > > > > Eryu > > > > > > > > > + > > > > > +_scratch_mkfs >$seqres.full 2>&1 > > > > > +_scratch_enable_pquota > > > > > +_qmount_option "usrquota,grpquota,prjquota" > > > > > +_qmount > > > > > +_require_prjquota $SCRATCH_DEV > > > > > +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT) > > > > > +rm -rf $SCRATCH_MNT/t > > > > > +mkdir $SCRATCH_MNT/t > > > > > +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t > > > > > +require_project > > > > > + > > > > > +echo "### Set up different grace timers to each type of quota" > > > > > +UBGRACE=12 > > > > > +UIGRACE=10 > > > > > +GBGRACE=4 > > > > > +GIGRACE=2 > > > > > +PBGRACE=8 > > > > > +PIGRACE=6 > > > > > + > > > > > +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > > > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > > > > +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT > > > > > +echo; echo "### Test user quota softlimit and grace time" > > > > > +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE > > > > > +# Reset the user quota space & inode limits, avoid it affect later test > > > > > +setquota -u $qa_user 0 0 0 0 $SCRATCH_MNT > > > > > + > > > > > +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > > > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > > > > +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT > > > > > +echo; echo "### Test group quota softlimit and grace time" > > > > > +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE > > > > > +# Reset the group quota space & inode limits, avoid it affect later test > > > > > +setquota -g $qa_user 0 0 0 0 $SCRATCH_MNT > > > > > + > > > > > +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \ > > > > > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT > > > > > +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT > > > > > +echo; echo "### Test project quota softlimit and grace time" > > > > > +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE > > > > > +# Reset the project quota space & inode limits > > > > > +setquota -P $qa_user 0 0 0 0 $SCRATCH_MNT > > > > > + > > > > > +# success, all done > > > > > +status=0 > > > > > +exit > > > > > diff --git a/tests/generic/600.out b/tests/generic/600.out > > > > > new file mode 100644 > > > > > index 00000000..6e15eaeb > > > > > --- /dev/null > > > > > +++ b/tests/generic/600.out > > > > > @@ -0,0 +1,41 @@ > > > > > +QA output created by 600 > > > > > +### Set up different grace timers to each type of quota > > > > > + > > > > > +### Test user quota softlimit and grace time > > > > > +### Initialize files, and their mode and ownership > > > > > +--- Test block quota --- > > > > > +Write 225 blocks... > > > > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > > > > +Try to write 1 one more block after grace... > > > > > +pwrite: Disk quota exceeded > > > > > +--- Test inode quota --- > > > > > +Create 2 more files, over the inode softlimit... > > > > > +Try to create one more inode after grace... > > > > > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > > > > > +### Remove all files > > > > > + > > > > > +### Test group quota softlimit and grace time > > > > > +### Initialize files, and their mode and ownership > > > > > +--- Test block quota --- > > > > > +Write 225 blocks... > > > > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > > > > +Try to write 1 one more block after grace... > > > > > +pwrite: Disk quota exceeded > > > > > +--- Test inode quota --- > > > > > +Create 2 more files, over the inode softlimit... > > > > > +Try to create one more inode after grace... > > > > > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded > > > > > +### Remove all files > > > > > + > > > > > +### Test project quota softlimit and grace time > > > > > +### Initialize files, and their mode and ownership > > > > > +--- Test block quota --- > > > > > +Write 225 blocks... > > > > > +Rewrite 250 blocks plus 1 byte, over the block softlimit... > > > > > +Try to write 1 one more block after grace... > > > > > +pwrite: Disk quota exceeded > > > > > +--- Test inode quota --- > > > > > +Create 2 more files, over the inode softlimit... > > > > > +Try to create one more inode after grace... > > > > > +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded > > > > > +### Remove all files > > > > > > > > > >
diff --git a/common/quota b/common/quota index 240e0bbc..1437d5f7 100644 --- a/common/quota +++ b/common/quota @@ -217,6 +217,10 @@ _qmount() if [ "$FSTYP" != "xfs" ]; then quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1 quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1 + # try to turn on project quota if it's supported + if quotaon --help 2>&1 | grep -q '\-\-project'; then + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1 + fi fi chmod ugo+rwx $SCRATCH_MNT } diff --git a/tests/generic/902 b/tests/generic/902 new file mode 100755 index 00000000..03b4dcb3 --- /dev/null +++ b/tests/generic/902 @@ -0,0 +1,187 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test No. 902 +# +# Test per-type(user, group and project) filesystem quota timers, make sure +# enforcement +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + restore_project + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/quota + +# remove previous $seqres.full before test +rm -f $seqres.full + +require_project() +{ + rm -f $tmp.projects $tmp.projid + if [ -f /etc/projects ];then + cat /etc/projects > $tmp.projects + fi + if [ -f /etc/projid ];then + cat /etc/projid > $tmp.projid + fi + + cat >/etc/projects <<EOF +100:$SCRATCH_MNT/t +EOF + cat >/etc/projid <<EOF +$qa_user:100 +EOF + PROJECT_CHANGED=1 +} + +restore_project() +{ + if [ "$PROJECT_CHANGED" = "1" ];then + rm -f /etc/projects /etc/projid + if [ -f $tmp.projects ];then + cat $tmp.projects > /etc/projects + fi + if [ -f $tmp.projid ];then + cat $tmp.projid > /etc/projid + fi + fi +} + +init_files() +{ + local dir=$1 + + echo "### Initialize files, and their mode and ownership" + touch $dir/file{1,2} 2>/dev/null + chown $qa_user $dir/file{1,2} 2>/dev/null + chgrp $qa_user $dir/file{1,2} 2>/dev/null + chmod 777 $dir 2>/dev/null +} + +cleanup_files() +{ + echo "### Remove all files" + rm -f ${1}/file{1,2,3,4,5,6} +} + +test_grace() +{ + local type=$1 + local dir=$2 + local bgrace=$3 + local igrace=$4 + + init_files $dir + echo "--- Test block quota ---" + # Firstly fit below block soft limit + echo "Write 225 blocks..." + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \ + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ + _filter_xfs_io_error | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Secondly overcome block soft limit + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..." + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \ + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ + _filter_xfs_io_error | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Reset grace time here, make below grace time test more accurate + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null + # Now sleep enough grace time and check that softlimit got enforced + sleep $((bgrace + 1)) + echo "Try to write 1 one more block after grace..." + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \ + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \ + tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + echo "--- Test inode quota ---" + # And now the softlimit test for inodes + # First reset space limits so that we don't have problems with + # space reservations on XFS + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT + echo "Create 2 more files, over the inode softlimit..." + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \ + _filter_scratch | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Reset grace time here, make below grace time test more accurate + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null + # Wait and check grace time enforcement + sleep $((igrace+1)) + echo "Try to create one more inode after grace..." + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full | + _filter_scratch | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + cleanup_files $dir +} + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch +_require_setquota_project +_require_quota +_require_user +_require_group + +_scratch_mkfs >$seqres.full 2>&1 +_scratch_enable_pquota +_qmount_option "usrquota,grpquota,prjquota" +_qmount +_require_prjquota $SCRATCH_DEV +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT) +rm -rf $SCRATCH_MNT/t +mkdir $SCRATCH_MNT/t +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t +require_project + +echo "### Set up different grace timers to each type of quota" +UBGRACE=12 +UIGRACE=10 +GBGRACE=4 +GIGRACE=2 +PBGRACE=8 +PIGRACE=6 + +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \ + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT +echo; echo "### Test user quota softlimit and grace time" +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE +# Reset the user quota space & inode limits, avoid it affect later test +setquota -u $qa_user 0 0 0 0 $SCRATCH_MNT + +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \ + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT +echo; echo "### Test group quota softlimit and grace time" +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE +# Reset the group quota space & inode limits, avoid it affect later test +setquota -g $qa_user 0 0 0 0 $SCRATCH_MNT + +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \ + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT +echo; echo "### Test project quota softlimit and grace time" +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE +# Reset the project quota space & inode limits +setquota -P $qa_user 0 0 0 0 $SCRATCH_MNT + +# success, all done +status=0 +exit diff --git a/tests/generic/902.out b/tests/generic/902.out new file mode 100644 index 00000000..6e15eaeb --- /dev/null +++ b/tests/generic/902.out @@ -0,0 +1,41 @@ +QA output created by 902 +### Set up different grace timers to each type of quota + +### Test user quota softlimit and grace time +### Initialize files, and their mode and ownership +--- Test block quota --- +Write 225 blocks... +Rewrite 250 blocks plus 1 byte, over the block softlimit... +Try to write 1 one more block after grace... +pwrite: Disk quota exceeded +--- Test inode quota --- +Create 2 more files, over the inode softlimit... +Try to create one more inode after grace... +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded +### Remove all files + +### Test group quota softlimit and grace time +### Initialize files, and their mode and ownership +--- Test block quota --- +Write 225 blocks... +Rewrite 250 blocks plus 1 byte, over the block softlimit... +Try to write 1 one more block after grace... +pwrite: Disk quota exceeded +--- Test inode quota --- +Create 2 more files, over the inode softlimit... +Try to create one more inode after grace... +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded +### Remove all files + +### Test project quota softlimit and grace time +### Initialize files, and their mode and ownership +--- Test block quota --- +Write 225 blocks... +Rewrite 250 blocks plus 1 byte, over the block softlimit... +Try to write 1 one more block after grace... +pwrite: Disk quota exceeded +--- Test inode quota --- +Create 2 more files, over the inode softlimit... +Try to create one more inode after grace... +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded +### Remove all files diff --git a/tests/generic/group b/tests/generic/group index 50c340a6..66e71a70 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -601,3 +601,4 @@ 596 auto quick 900 auto quick perms 901 auto quick perms +902 auto quick quota