| Message ID | 20200526011505.31884-24-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | [01/27] drm: bridge: adv7511: Split EDID read to a separate function | expand |
On 26/05/2020 03:15, Laurent Pinchart wrote: > On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings > require a video output port connected to an HDMI sink (most likely an > HDMI connector, in rare cases another bridges converting HDMI to another > protocol). For those platforms, retrieve the next bridge and attach it > from the dw-hdmi bridge attach handler. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 52 ++++++++++++++++++++++- > include/drm/bridge/dw_hdmi.h | 2 + > 2 files changed, 53 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > index 6148a022569a..512e67bb1c32 100644 > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > @@ -143,6 +143,7 @@ struct dw_hdmi_phy_data { > struct dw_hdmi { > struct drm_connector connector; > struct drm_bridge bridge; > + struct drm_bridge *next_bridge; > > unsigned int version; > > @@ -2797,7 +2798,8 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge, > struct dw_hdmi *hdmi = bridge->driver_private; > > if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > - return 0; > + return drm_bridge_attach(bridge->encoder, hdmi->next_bridge, > + bridge, flags); > > return dw_hdmi_connector_create(hdmi); > } > @@ -3179,6 +3181,50 @@ static void dw_hdmi_init_hw(struct dw_hdmi *hdmi) > hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data); > } > > +static int dw_hdmi_parse_dt(struct dw_hdmi *hdmi) > +{ > + struct device_node *endpoint; > + struct device_node *remote; > + > + if (!hdmi->plat_data->output_port) > + return 0; > + > + endpoint = of_graph_get_endpoint_by_regs(hdmi->dev->of_node, > + hdmi->plat_data->output_port, > + -1); > + if (!endpoint) { > + /* > + * Don't treat this as a fatal error as the Rockchip DW-HDMI > + * binding doesn't make the output port mandatory. > + */ > + dev_dbg(hdmi->dev, "Missing endpoint in port@%u\n", > + hdmi->plat_data->output_port); > + return 0; > + } > + > + remote = of_graph_get_remote_port_parent(endpoint); > + of_node_put(endpoint); > + if (!remote) { > + dev_err(hdmi->dev, "Endpoint in port@%u unconnected\n", > + hdmi->plat_data->output_port); > + return -ENODEV; > + } > + > + if (!of_device_is_available(remote)) { > + dev_err(hdmi->dev, "port@%u remote device is disabled\n", > + hdmi->plat_data->output_port); > + of_node_put(remote); > + return -ENODEV; > + } > + > + hdmi->next_bridge = of_drm_find_bridge(remote); > + of_node_put(remote); > + if (!hdmi->next_bridge) > + return -EPROBE_DEFER; I'll be safer to print a warn for now until all platforms has been tested. > + > + return 0; > +} > + > static struct dw_hdmi * > __dw_hdmi_probe(struct platform_device *pdev, > const struct dw_hdmi_plat_data *plat_data) > @@ -3216,6 +3262,10 @@ __dw_hdmi_probe(struct platform_device *pdev, > mutex_init(&hdmi->cec_notifier_mutex); > spin_lock_init(&hdmi->audio_lock); > > + ret = dw_hdmi_parse_dt(hdmi); > + if (ret < 0) > + return ERR_PTR(ret); > + > ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0); > if (ddc_node) { > hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node); > diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h > index ea34ca146b82..8ebeb65d6371 100644 > --- a/include/drm/bridge/dw_hdmi.h > +++ b/include/drm/bridge/dw_hdmi.h > @@ -126,6 +126,8 @@ struct dw_hdmi_phy_ops { > struct dw_hdmi_plat_data { > struct regmap *regm; > > + unsigned int output_port; > + > unsigned long input_bus_encoding; > bool use_drm_infoframe; > bool ycbcr_420_allowed; > I must check on meson, since I'm not sure for now if the connector probes. Anyway, this looks fine. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
On 2020-05-26 14:50, Neil Armstrong wrote: > On 26/05/2020 03:15, Laurent Pinchart wrote: >> On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings >> require a video output port connected to an HDMI sink (most likely an >> HDMI connector, in rare cases another bridges converting HDMI to another >> protocol). For those platforms, retrieve the next bridge and attach it >> from the dw-hdmi bridge attach handler. >> >> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> >> --- >> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 52 ++++++++++++++++++++++- >> include/drm/bridge/dw_hdmi.h | 2 + >> 2 files changed, 53 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> index 6148a022569a..512e67bb1c32 100644 >> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> @@ -143,6 +143,7 @@ struct dw_hdmi_phy_data { >> struct dw_hdmi { >> struct drm_connector connector; >> struct drm_bridge bridge; >> + struct drm_bridge *next_bridge; >> >> unsigned int version; >> >> @@ -2797,7 +2798,8 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge, >> struct dw_hdmi *hdmi = bridge->driver_private; >> >> if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) >> - return 0; >> + return drm_bridge_attach(bridge->encoder, hdmi->next_bridge, >> + bridge, flags); >> >> return dw_hdmi_connector_create(hdmi); >> } >> @@ -3179,6 +3181,50 @@ static void dw_hdmi_init_hw(struct dw_hdmi *hdmi) >> hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data); >> } >> >> +static int dw_hdmi_parse_dt(struct dw_hdmi *hdmi) >> +{ >> + struct device_node *endpoint; >> + struct device_node *remote; >> + >> + if (!hdmi->plat_data->output_port) >> + return 0; >> + >> + endpoint = of_graph_get_endpoint_by_regs(hdmi->dev->of_node, >> + hdmi->plat_data->output_port, >> + -1); >> + if (!endpoint) { >> + /* >> + * Don't treat this as a fatal error as the Rockchip DW-HDMI >> + * binding doesn't make the output port mandatory. >> + */ >> + dev_dbg(hdmi->dev, "Missing endpoint in port@%u\n", >> + hdmi->plat_data->output_port); >> + return 0; After this series only rcar-du set output_port so this block should only run for rcar-du, for platforms without output_port the if-statement for !hdmi->plat_data->output_port already return success so you can probably return fatal error here. The comment is a little bit misleading because of the if-statement above or am I missing something? Regards, Jonas >> + } >> + >> + remote = of_graph_get_remote_port_parent(endpoint); >> + of_node_put(endpoint); >> + if (!remote) { >> + dev_err(hdmi->dev, "Endpoint in port@%u unconnected\n", >> + hdmi->plat_data->output_port); >> + return -ENODEV; >> + } >> + >> + if (!of_device_is_available(remote)) { >> + dev_err(hdmi->dev, "port@%u remote device is disabled\n", >> + hdmi->plat_data->output_port); >> + of_node_put(remote); >> + return -ENODEV; >> + } >> + >> + hdmi->next_bridge = of_drm_find_bridge(remote); >> + of_node_put(remote); >> + if (!hdmi->next_bridge) >> + return -EPROBE_DEFER; > > I'll be safer to print a warn for now until all platforms has been tested. > >> + >> + return 0; >> +} >> + >> static struct dw_hdmi * >> __dw_hdmi_probe(struct platform_device *pdev, >> const struct dw_hdmi_plat_data *plat_data) >> @@ -3216,6 +3262,10 @@ __dw_hdmi_probe(struct platform_device *pdev, >> mutex_init(&hdmi->cec_notifier_mutex); >> spin_lock_init(&hdmi->audio_lock); >> >> + ret = dw_hdmi_parse_dt(hdmi); >> + if (ret < 0) >> + return ERR_PTR(ret); >> + >> ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0); >> if (ddc_node) { >> hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node); >> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h >> index ea34ca146b82..8ebeb65d6371 100644 >> --- a/include/drm/bridge/dw_hdmi.h >> +++ b/include/drm/bridge/dw_hdmi.h >> @@ -126,6 +126,8 @@ struct dw_hdmi_phy_ops { >> struct dw_hdmi_plat_data { >> struct regmap *regm; >> >> + unsigned int output_port; >> + >> unsigned long input_bus_encoding; >> bool use_drm_infoframe; >> bool ycbcr_420_allowed; >> > > I must check on meson, since I'm not sure for now if the connector probes. > > Anyway, this looks fine. > > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> >
Hi Neil, On Tue, May 26, 2020 at 02:50:21PM +0200, Neil Armstrong wrote: > On 26/05/2020 03:15, Laurent Pinchart wrote: > > On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings > > require a video output port connected to an HDMI sink (most likely an > > HDMI connector, in rare cases another bridges converting HDMI to another > > protocol). For those platforms, retrieve the next bridge and attach it > > from the dw-hdmi bridge attach handler. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > --- > > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 52 ++++++++++++++++++++++- > > include/drm/bridge/dw_hdmi.h | 2 + > > 2 files changed, 53 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > > index 6148a022569a..512e67bb1c32 100644 > > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > > @@ -143,6 +143,7 @@ struct dw_hdmi_phy_data { > > struct dw_hdmi { > > struct drm_connector connector; > > struct drm_bridge bridge; > > + struct drm_bridge *next_bridge; > > > > unsigned int version; > > > > @@ -2797,7 +2798,8 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge, > > struct dw_hdmi *hdmi = bridge->driver_private; > > > > if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > > - return 0; > > + return drm_bridge_attach(bridge->encoder, hdmi->next_bridge, > > + bridge, flags); > > > > return dw_hdmi_connector_create(hdmi); > > } > > @@ -3179,6 +3181,50 @@ static void dw_hdmi_init_hw(struct dw_hdmi *hdmi) > > hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data); > > } > > > > +static int dw_hdmi_parse_dt(struct dw_hdmi *hdmi) > > +{ > > + struct device_node *endpoint; > > + struct device_node *remote; > > + > > + if (!hdmi->plat_data->output_port) > > + return 0; > > + > > + endpoint = of_graph_get_endpoint_by_regs(hdmi->dev->of_node, > > + hdmi->plat_data->output_port, > > + -1); > > + if (!endpoint) { > > + /* > > + * Don't treat this as a fatal error as the Rockchip DW-HDMI > > + * binding doesn't make the output port mandatory. > > + */ > > + dev_dbg(hdmi->dev, "Missing endpoint in port@%u\n", > > + hdmi->plat_data->output_port); > > + return 0; > > + } > > + > > + remote = of_graph_get_remote_port_parent(endpoint); > > + of_node_put(endpoint); > > + if (!remote) { > > + dev_err(hdmi->dev, "Endpoint in port@%u unconnected\n", > > + hdmi->plat_data->output_port); > > + return -ENODEV; > > + } > > + > > + if (!of_device_is_available(remote)) { > > + dev_err(hdmi->dev, "port@%u remote device is disabled\n", > > + hdmi->plat_data->output_port); > > + of_node_put(remote); > > + return -ENODEV; > > + } > > + > > + hdmi->next_bridge = of_drm_find_bridge(remote); > > + of_node_put(remote); > > + if (!hdmi->next_bridge) > > + return -EPROBE_DEFER; > > I'll be safer to print a warn for now until all platforms has been tested. Probe deferral isn't an error though, it can happen in normal conditions, if the next bridge hasn't been probed yet. A WARN_ON() would be pretty bad in that case, and even a dev_warn() may generate unnecessary worry. Given that this code only runs if hdmi->plat_data->output_port != 0, and only the rcar-du driver sets the output_port field, I think it's safe to not print any message. > > + > > + return 0; > > +} > > + > > static struct dw_hdmi * > > __dw_hdmi_probe(struct platform_device *pdev, > > const struct dw_hdmi_plat_data *plat_data) > > @@ -3216,6 +3262,10 @@ __dw_hdmi_probe(struct platform_device *pdev, > > mutex_init(&hdmi->cec_notifier_mutex); > > spin_lock_init(&hdmi->audio_lock); > > > > + ret = dw_hdmi_parse_dt(hdmi); > > + if (ret < 0) > > + return ERR_PTR(ret); > > + > > ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0); > > if (ddc_node) { > > hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node); > > diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h > > index ea34ca146b82..8ebeb65d6371 100644 > > --- a/include/drm/bridge/dw_hdmi.h > > +++ b/include/drm/bridge/dw_hdmi.h > > @@ -126,6 +126,8 @@ struct dw_hdmi_phy_ops { > > struct dw_hdmi_plat_data { > > struct regmap *regm; > > > > + unsigned int output_port; > > + > > unsigned long input_bus_encoding; > > bool use_drm_infoframe; > > bool ycbcr_420_allowed; > > > > I must check on meson, since I'm not sure for now if the connector probes. > > Anyway, this looks fine. > > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Hi Jonas, On Tue, May 26, 2020 at 02:23:33PM +0000, Jonas Karlman wrote: > On 2020-05-26 14:50, Neil Armstrong wrote: > > On 26/05/2020 03:15, Laurent Pinchart wrote: > >> On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings > >> require a video output port connected to an HDMI sink (most likely an > >> HDMI connector, in rare cases another bridges converting HDMI to another > >> protocol). For those platforms, retrieve the next bridge and attach it > >> from the dw-hdmi bridge attach handler. > >> > >> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > >> --- > >> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 52 ++++++++++++++++++++++- > >> include/drm/bridge/dw_hdmi.h | 2 + > >> 2 files changed, 53 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > >> index 6148a022569a..512e67bb1c32 100644 > >> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > >> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > >> @@ -143,6 +143,7 @@ struct dw_hdmi_phy_data { > >> struct dw_hdmi { > >> struct drm_connector connector; > >> struct drm_bridge bridge; > >> + struct drm_bridge *next_bridge; > >> > >> unsigned int version; > >> > >> @@ -2797,7 +2798,8 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge, > >> struct dw_hdmi *hdmi = bridge->driver_private; > >> > >> if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > >> - return 0; > >> + return drm_bridge_attach(bridge->encoder, hdmi->next_bridge, > >> + bridge, flags); > >> > >> return dw_hdmi_connector_create(hdmi); > >> } > >> @@ -3179,6 +3181,50 @@ static void dw_hdmi_init_hw(struct dw_hdmi *hdmi) > >> hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data); > >> } > >> > >> +static int dw_hdmi_parse_dt(struct dw_hdmi *hdmi) > >> +{ > >> + struct device_node *endpoint; > >> + struct device_node *remote; > >> + > >> + if (!hdmi->plat_data->output_port) > >> + return 0; > >> + > >> + endpoint = of_graph_get_endpoint_by_regs(hdmi->dev->of_node, > >> + hdmi->plat_data->output_port, > >> + -1); > >> + if (!endpoint) { > >> + /* > >> + * Don't treat this as a fatal error as the Rockchip DW-HDMI > >> + * binding doesn't make the output port mandatory. > >> + */ > >> + dev_dbg(hdmi->dev, "Missing endpoint in port@%u\n", > >> + hdmi->plat_data->output_port); > >> + return 0; > > After this series only rcar-du set output_port so this block should only > run for rcar-du, for platforms without output_port the if-statement > for !hdmi->plat_data->output_port already return success so you can > probably return fatal error here. > > The comment is a little bit misleading because of the if-statement above > or am I missing something? You're right, I'll turn this into an error. > >> + } > >> + > >> + remote = of_graph_get_remote_port_parent(endpoint); > >> + of_node_put(endpoint); > >> + if (!remote) { > >> + dev_err(hdmi->dev, "Endpoint in port@%u unconnected\n", > >> + hdmi->plat_data->output_port); > >> + return -ENODEV; > >> + } > >> + > >> + if (!of_device_is_available(remote)) { > >> + dev_err(hdmi->dev, "port@%u remote device is disabled\n", > >> + hdmi->plat_data->output_port); > >> + of_node_put(remote); > >> + return -ENODEV; > >> + } > >> + > >> + hdmi->next_bridge = of_drm_find_bridge(remote); > >> + of_node_put(remote); > >> + if (!hdmi->next_bridge) > >> + return -EPROBE_DEFER; > > > > I'll be safer to print a warn for now until all platforms has been tested. > > > >> + > >> + return 0; > >> +} > >> + > >> static struct dw_hdmi * > >> __dw_hdmi_probe(struct platform_device *pdev, > >> const struct dw_hdmi_plat_data *plat_data) > >> @@ -3216,6 +3262,10 @@ __dw_hdmi_probe(struct platform_device *pdev, > >> mutex_init(&hdmi->cec_notifier_mutex); > >> spin_lock_init(&hdmi->audio_lock); > >> > >> + ret = dw_hdmi_parse_dt(hdmi); > >> + if (ret < 0) > >> + return ERR_PTR(ret); > >> + > >> ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0); > >> if (ddc_node) { > >> hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node); > >> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h > >> index ea34ca146b82..8ebeb65d6371 100644 > >> --- a/include/drm/bridge/dw_hdmi.h > >> +++ b/include/drm/bridge/dw_hdmi.h > >> @@ -126,6 +126,8 @@ struct dw_hdmi_phy_ops { > >> struct dw_hdmi_plat_data { > >> struct regmap *regm; > >> > >> + unsigned int output_port; > >> + > >> unsigned long input_bus_encoding; > >> bool use_drm_infoframe; > >> bool ycbcr_420_allowed; > >> > > > > I must check on meson, since I'm not sure for now if the connector probes. > > > > Anyway, this looks fine. > > > > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> > >
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index 6148a022569a..512e67bb1c32 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -143,6 +143,7 @@ struct dw_hdmi_phy_data { struct dw_hdmi { struct drm_connector connector; struct drm_bridge bridge; + struct drm_bridge *next_bridge; unsigned int version; @@ -2797,7 +2798,8 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge, struct dw_hdmi *hdmi = bridge->driver_private; if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) - return 0; + return drm_bridge_attach(bridge->encoder, hdmi->next_bridge, + bridge, flags); return dw_hdmi_connector_create(hdmi); } @@ -3179,6 +3181,50 @@ static void dw_hdmi_init_hw(struct dw_hdmi *hdmi) hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data); } +static int dw_hdmi_parse_dt(struct dw_hdmi *hdmi) +{ + struct device_node *endpoint; + struct device_node *remote; + + if (!hdmi->plat_data->output_port) + return 0; + + endpoint = of_graph_get_endpoint_by_regs(hdmi->dev->of_node, + hdmi->plat_data->output_port, + -1); + if (!endpoint) { + /* + * Don't treat this as a fatal error as the Rockchip DW-HDMI + * binding doesn't make the output port mandatory. + */ + dev_dbg(hdmi->dev, "Missing endpoint in port@%u\n", + hdmi->plat_data->output_port); + return 0; + } + + remote = of_graph_get_remote_port_parent(endpoint); + of_node_put(endpoint); + if (!remote) { + dev_err(hdmi->dev, "Endpoint in port@%u unconnected\n", + hdmi->plat_data->output_port); + return -ENODEV; + } + + if (!of_device_is_available(remote)) { + dev_err(hdmi->dev, "port@%u remote device is disabled\n", + hdmi->plat_data->output_port); + of_node_put(remote); + return -ENODEV; + } + + hdmi->next_bridge = of_drm_find_bridge(remote); + of_node_put(remote); + if (!hdmi->next_bridge) + return -EPROBE_DEFER; + + return 0; +} + static struct dw_hdmi * __dw_hdmi_probe(struct platform_device *pdev, const struct dw_hdmi_plat_data *plat_data) @@ -3216,6 +3262,10 @@ __dw_hdmi_probe(struct platform_device *pdev, mutex_init(&hdmi->cec_notifier_mutex); spin_lock_init(&hdmi->audio_lock); + ret = dw_hdmi_parse_dt(hdmi); + if (ret < 0) + return ERR_PTR(ret); + ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0); if (ddc_node) { hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node); diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h index ea34ca146b82..8ebeb65d6371 100644 --- a/include/drm/bridge/dw_hdmi.h +++ b/include/drm/bridge/dw_hdmi.h @@ -126,6 +126,8 @@ struct dw_hdmi_phy_ops { struct dw_hdmi_plat_data { struct regmap *regm; + unsigned int output_port; + unsigned long input_bus_encoding; bool use_drm_infoframe; bool ycbcr_420_allowed;
On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings require a video output port connected to an HDMI sink (most likely an HDMI connector, in rare cases another bridges converting HDMI to another protocol). For those platforms, retrieve the next bridge and attach it from the dw-hdmi bridge attach handler. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 52 ++++++++++++++++++++++- include/drm/bridge/dw_hdmi.h | 2 + 2 files changed, 53 insertions(+), 1 deletion(-)