| Message ID | DM5PR11MB18339389B4BD1BB2B4B5AB7A8D860@DM5PR11MB1833.namprd11.prod.outlook.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC] hw: nios2: update interrupt_request when STATUS_PIE disabled | expand |
On 05/06/2020 07.59, Wu, Wentong wrote: > Hi all, > > I’m running icount mode on qemu_nios2 with customized platform(almost > same with 10m50_devboard), > > but cpu abort happened(qemu: fatal: Raised interrupt while not in I/O > function) when guest code changes > > state register with wrctl instruction, add some debug code finding that > it’s caused by the interrupt_request > > mismatch, so I made a patch as below, not sure if it’s right, hope I can > have some discussion with maintainers Hi, please have a look at the MAINTAINERS file in the main directory of the sources, you can find the corresponding maintainers there. Thus if you have questions related to nios2, please make sure to put Chris and Marek into CC: so that your patch gets the right attention! Thanks, Thomas > commit efdb3da4e145a7a34ba8b3ab1cdcfc346ae20a11 (HEAD -> master) > > Author: Wentong Wu <wentong.wu@intel.com> > > Date: Fri Jun 5 09:29:43 2020 -0400 > > > > hw: nios2: update interrupt_request when CR_STATUS_PIE disabled > > > > Update interrupt_request when external interupt pends for STATUS_PIE > > disabled. Otherwise on icount enabled nios2 target there will be cpu > > abort when guest code changes state register with wrctl instruction. > > > > Signed-off-by: Wentong Wu <wentong.wu@intel.com> > > > > diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c > > index 1c1989d5..b04db4d7 100644 > > --- a/hw/nios2/cpu_pic.c > > +++ b/hw/nios2/cpu_pic.c > > @@ -42,7 +42,9 @@ static void nios2_pic_cpu_handler(void *opaque, int > irq, int level) > > } else if (!level) { > > env->irq_pending = 0; > > cpu_reset_interrupt(cs, type); > > - } > > + } else { > > + cs->interrupt_request |= type; > > + } > > } else { > > if (level) { > > cpu_interrupt(cs, type); >
Thanks Thomas! @Chris Wulff @Marek Vasut could you please give some suggestions? Thanks -----Original Message----- From: Thomas Huth <thuth@redhat.com> Sent: Friday, June 5, 2020 3:07 PM To: Wu, Wentong <wentong.wu@intel.com>; qemu-devel@nongnu.org Cc: Chris Wulff <crwulff@gmail.com>; Marek Vasut <marex@denx.de> Subject: Re: [RFC] hw: nios2: update interrupt_request when STATUS_PIE disabled On 05/06/2020 07.59, Wu, Wentong wrote: > Hi all, > > I’m running icount mode on qemu_nios2 with customized platform(almost > same with 10m50_devboard), > > but cpu abort happened(qemu: fatal: Raised interrupt while not in I/O > function) when guest code changes > > state register with wrctl instruction, add some debug code finding > that it’s caused by the interrupt_request > > mismatch, so I made a patch as below, not sure if it’s right, hope I > can have some discussion with maintainers Hi, please have a look at the MAINTAINERS file in the main directory of the sources, you can find the corresponding maintainers there. Thus if you have questions related to nios2, please make sure to put Chris and Marek into CC: so that your patch gets the right attention! Thanks, Thomas > commit efdb3da4e145a7a34ba8b3ab1cdcfc346ae20a11 (HEAD -> master) > > Author: Wentong Wu <wentong.wu@intel.com> > > Date: Fri Jun 5 09:29:43 2020 -0400 > > > > hw: nios2: update interrupt_request when CR_STATUS_PIE disabled > > > > Update interrupt_request when external interupt pends for > STATUS_PIE > > disabled. Otherwise on icount enabled nios2 target there will be > cpu > > abort when guest code changes state register with wrctl instruction. > > > > Signed-off-by: Wentong Wu <wentong.wu@intel.com> > > > > diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c > > index 1c1989d5..b04db4d7 100644 > > --- a/hw/nios2/cpu_pic.c > > +++ b/hw/nios2/cpu_pic.c > > @@ -42,7 +42,9 @@ static void nios2_pic_cpu_handler(void *opaque, int > irq, int level) > > } else if (!level) { > > env->irq_pending = 0; > > cpu_reset_interrupt(cs, type); > > - } > > + } else { > > + cs->interrupt_request |= type; > > + } > > } else { > > if (level) { > > cpu_interrupt(cs, type); >
@Chris Wulff @Marek Vasut could you please take a look this issue and patch? Thanks in advance! -----Original Message----- From: Thomas Huth <thuth@redhat.com> Sent: Friday, June 5, 2020 3:07 PM To: Wu, Wentong <wentong.wu@intel.com>; qemu-devel@nongnu.org Cc: Chris Wulff <crwulff@gmail.com>; Marek Vasut <marex@denx.de> Subject: Re: [RFC] hw: nios2: update interrupt_request when STATUS_PIE disabled On 05/06/2020 07.59, Wu, Wentong wrote: > Hi all, > > I’m running icount mode on qemu_nios2 with customized platform(almost > same with 10m50_devboard), > > but cpu abort happened(qemu: fatal: Raised interrupt while not in I/O > function) when guest code changes > > state register with wrctl instruction, add some debug code finding > that it’s caused by the interrupt_request > > mismatch, so I made a patch as below, not sure if it’s right, hope I > can have some discussion with maintainers Hi, please have a look at the MAINTAINERS file in the main directory of the sources, you can find the corresponding maintainers there. Thus if you have questions related to nios2, please make sure to put Chris and Marek into CC: so that your patch gets the right attention! Thanks, Thomas > commit efdb3da4e145a7a34ba8b3ab1cdcfc346ae20a11 (HEAD -> master) > > Author: Wentong Wu <wentong.wu@intel.com> > > Date: Fri Jun 5 09:29:43 2020 -0400 > > > > hw: nios2: update interrupt_request when CR_STATUS_PIE disabled > > > > Update interrupt_request when external interupt pends for > STATUS_PIE > > disabled. Otherwise on icount enabled nios2 target there will be > cpu > > abort when guest code changes state register with wrctl instruction. > > > > Signed-off-by: Wentong Wu <wentong.wu@intel.com> > > > > diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c > > index 1c1989d5..b04db4d7 100644 > > --- a/hw/nios2/cpu_pic.c > > +++ b/hw/nios2/cpu_pic.c > > @@ -42,7 +42,9 @@ static void nios2_pic_cpu_handler(void *opaque, int > irq, int level) > > } else if (!level) { > > env->irq_pending = 0; > > cpu_reset_interrupt(cs, type); > > - } > > + } else { > > + cs->interrupt_request |= type; > > + } > > } else { > > if (level) { > > cpu_interrupt(cs, type); >
Hi @Thomas Huth, It's my first time to send patch in qemu community, not sure if there is something wrong sending patch like below and I'm happy to receive any suggestions. And by the way, could you please help review the patch? Thanks -----Original Message----- From: Thomas Huth <thuth@redhat.com> Sent: Friday, June 5, 2020 3:07 PM To: Wu, Wentong <wentong.wu@intel.com>; qemu-devel@nongnu.org Cc: Chris Wulff <crwulff@gmail.com>; Marek Vasut <marex@denx.de> Subject: Re: [RFC] hw: nios2: update interrupt_request when STATUS_PIE disabled On 05/06/2020 07.59, Wu, Wentong wrote: > Hi all, > > I’m running icount mode on qemu_nios2 with customized platform(almost > same with 10m50_devboard), > > but cpu abort happened(qemu: fatal: Raised interrupt while not in I/O > function) when guest code changes > > state register with wrctl instruction, add some debug code finding > that it’s caused by the interrupt_request > > mismatch, so I made a patch as below, not sure if it’s right, hope I > can have some discussion with maintainers Hi, please have a look at the MAINTAINERS file in the main directory of the sources, you can find the corresponding maintainers there. Thus if you have questions related to nios2, please make sure to put Chris and Marek into CC: so that your patch gets the right attention! Thanks, Thomas > commit efdb3da4e145a7a34ba8b3ab1cdcfc346ae20a11 (HEAD -> master) > > Author: Wentong Wu <wentong.wu@intel.com> > > Date: Fri Jun 5 09:29:43 2020 -0400 > > > > hw: nios2: update interrupt_request when CR_STATUS_PIE disabled > > > > Update interrupt_request when external interupt pends for > STATUS_PIE > > disabled. Otherwise on icount enabled nios2 target there will be > cpu > > abort when guest code changes state register with wrctl instruction. > > > > Signed-off-by: Wentong Wu <wentong.wu@intel.com> > > > > diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c > > index 1c1989d5..b04db4d7 100644 > > --- a/hw/nios2/cpu_pic.c > > +++ b/hw/nios2/cpu_pic.c > > @@ -42,7 +42,9 @@ static void nios2_pic_cpu_handler(void *opaque, int > irq, int level) > > } else if (!level) { > > env->irq_pending = 0; > > cpu_reset_interrupt(cs, type); > > - } > > + } else { > > + cs->interrupt_request |= type; > > + } > > } else { > > if (level) { > > cpu_interrupt(cs, type); >
On 09/06/2020 10.39, Wu, Wentong wrote: > Hi @Thomas Huth, > It's my first time to send patch in qemu community, not sure if there is something wrong sending patch like below and I'm happy to receive any suggestions. And by the way, could you please help review the patch? Hi, it would be good if you could send the patch as plain text e-mail, not as HTML mail, otherwise it's impossible to apply it with "git am" or "patch". If you can, try to use "git send-email" to send out patches. Also see https://wiki.qemu.org/Contribute/SubmitAPatch for some more details. Technically, I don't have a clue about nios2, so sorry, I can't help reviewing it. But it's a very small patch, so maybe send the plain-text mail with CC: to qemu-trivial@nongnu.org - if Chris or Marek provide an Reviewed-by or Acked-by then, it should get merged with the next trivial pull request. HTH, Thomas > Thanks > > -----Original Message----- > From: Thomas Huth <thuth@redhat.com> > Sent: Friday, June 5, 2020 3:07 PM > To: Wu, Wentong <wentong.wu@intel.com>; qemu-devel@nongnu.org > Cc: Chris Wulff <crwulff@gmail.com>; Marek Vasut <marex@denx.de> > Subject: Re: [RFC] hw: nios2: update interrupt_request when STATUS_PIE disabled > > On 05/06/2020 07.59, Wu, Wentong wrote: >> Hi all, >> >> I’m running icount mode on qemu_nios2 with customized platform(almost >> same with 10m50_devboard), >> >> but cpu abort happened(qemu: fatal: Raised interrupt while not in I/O >> function) when guest code changes >> >> state register with wrctl instruction, add some debug code finding >> that it’s caused by the interrupt_request >> >> mismatch, so I made a patch as below, not sure if it’s right, hope I >> can have some discussion with maintainers > > Hi, > > please have a look at the MAINTAINERS file in the main directory of the sources, you can find the corresponding maintainers there. Thus if you have questions related to nios2, please make sure to put Chris and Marek into CC: so that your patch gets the right attention! > > Thanks, > Thomas > > > >> commit efdb3da4e145a7a34ba8b3ab1cdcfc346ae20a11 (HEAD -> master) >> >> Author: Wentong Wu <wentong.wu@intel.com> >> >> Date: Fri Jun 5 09:29:43 2020 -0400 >> >> >> >> hw: nios2: update interrupt_request when CR_STATUS_PIE disabled >> >> >> >> Update interrupt_request when external interupt pends for >> STATUS_PIE >> >> disabled. Otherwise on icount enabled nios2 target there will be >> cpu >> >> abort when guest code changes state register with wrctl instruction. >> >> >> >> Signed-off-by: Wentong Wu <wentong.wu@intel.com> >> >> >> >> diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c >> >> index 1c1989d5..b04db4d7 100644 >> >> --- a/hw/nios2/cpu_pic.c >> >> +++ b/hw/nios2/cpu_pic.c >> >> @@ -42,7 +42,9 @@ static void nios2_pic_cpu_handler(void *opaque, int >> irq, int level) >> >> } else if (!level) { >> >> env->irq_pending = 0; >> >> cpu_reset_interrupt(cs, type); >> >> - } >> >> + } else { >> >> + cs->interrupt_request |= type; >> >> + } >> >> } else { >> >> if (level) { >> >> cpu_interrupt(cs, type); >> >
HI Thomas, Thanks for the help, I updated the patch in the new thread https://lists.gnu.org/archive/html/qemu-devel/2020-06/msg03103.html, hoping that follows QEMU's working style, Thanks again. BR, Wentong -----Original Message----- From: Thomas Huth <thuth@redhat.com> Sent: Wednesday, June 10, 2020 9:29 PM To: Wu, Wentong <wentong.wu@intel.com>; qemu-devel@nongnu.org Cc: Chris Wulff <crwulff@gmail.com>; Marek Vasut <marex@denx.de> Subject: Re: [RFC] hw: nios2: update interrupt_request when STATUS_PIE disabled On 09/06/2020 10.39, Wu, Wentong wrote: > Hi @Thomas Huth, > It's my first time to send patch in qemu community, not sure if there is something wrong sending patch like below and I'm happy to receive any suggestions. And by the way, could you please help review the patch? Hi, it would be good if you could send the patch as plain text e-mail, not as HTML mail, otherwise it's impossible to apply it with "git am" or "patch". If you can, try to use "git send-email" to send out patches. Also see https://wiki.qemu.org/Contribute/SubmitAPatch for some more details. Technically, I don't have a clue about nios2, so sorry, I can't help reviewing it. But it's a very small patch, so maybe send the plain-text mail with CC: to qemu-trivial@nongnu.org - if Chris or Marek provide an Reviewed-by or Acked-by then, it should get merged with the next trivial pull request. HTH, Thomas > Thanks > > -----Original Message----- > From: Thomas Huth <thuth@redhat.com> > Sent: Friday, June 5, 2020 3:07 PM > To: Wu, Wentong <wentong.wu@intel.com>; qemu-devel@nongnu.org > Cc: Chris Wulff <crwulff@gmail.com>; Marek Vasut <marex@denx.de> > Subject: Re: [RFC] hw: nios2: update interrupt_request when STATUS_PIE > disabled > > On 05/06/2020 07.59, Wu, Wentong wrote: >> Hi all, >> >> I’m running icount mode on qemu_nios2 with customized >> platform(almost same with 10m50_devboard), >> >> but cpu abort happened(qemu: fatal: Raised interrupt while not in I/O >> function) when guest code changes >> >> state register with wrctl instruction, add some debug code finding >> that it’s caused by the interrupt_request >> >> mismatch, so I made a patch as below, not sure if it’s right, hope I >> can have some discussion with maintainers > > Hi, > > please have a look at the MAINTAINERS file in the main directory of the sources, you can find the corresponding maintainers there. Thus if you have questions related to nios2, please make sure to put Chris and Marek into CC: so that your patch gets the right attention! > > Thanks, > Thomas > > > >> commit efdb3da4e145a7a34ba8b3ab1cdcfc346ae20a11 (HEAD -> master) >> >> Author: Wentong Wu <wentong.wu@intel.com> >> >> Date: Fri Jun 5 09:29:43 2020 -0400 >> >> >> >> hw: nios2: update interrupt_request when CR_STATUS_PIE disabled >> >> >> >> Update interrupt_request when external interupt pends for >> STATUS_PIE >> >> disabled. Otherwise on icount enabled nios2 target there will be >> cpu >> >> abort when guest code changes state register with wrctl instruction. >> >> >> >> Signed-off-by: Wentong Wu <wentong.wu@intel.com> >> >> >> >> diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c >> >> index 1c1989d5..b04db4d7 100644 >> >> --- a/hw/nios2/cpu_pic.c >> >> +++ b/hw/nios2/cpu_pic.c >> >> @@ -42,7 +42,9 @@ static void nios2_pic_cpu_handler(void *opaque, int >> irq, int level) >> >> } else if (!level) { >> >> env->irq_pending = 0; >> >> cpu_reset_interrupt(cs, type); >> >> - } >> >> + } else { >> >> + cs->interrupt_request |= type; >> >> + } >> >> } else { >> >> if (level) { >> >> cpu_interrupt(cs, type); >> >
diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c index 1c1989d5..b04db4d7 100644 --- a/hw/nios2/cpu_pic.c +++ b/hw/nios2/cpu_pic.c @@ -42,7 +42,9 @@ static void nios2_pic_cpu_handler(void *opaque, int irq, int level) } else if (!level) { env->irq_pending = 0; cpu_reset_interrupt(cs, type); - } + } else { + cs->interrupt_request |= type; + } } else { if (level) { cpu_interrupt(cs, type);
Hi all, I'm running icount mode on qemu_nios2 with customized platform(almost same with 10m50_devboard), but cpu abort happened(qemu: fatal: Raised interrupt while not in I/O function) when guest code changes state register with wrctl instruction, add some debug code finding that it's caused by the interrupt_request mismatch, so I made a patch as below, not sure if it's right, hope I can have some discussion with maintainers first! Thanks a lot! commit efdb3da4e145a7a34ba8b3ab1cdcfc346ae20a11 (HEAD -> master) Author: Wentong Wu <wentong.wu@intel.com> Date: Fri Jun 5 09:29:43 2020 -0400 hw: nios2: update interrupt_request when CR_STATUS_PIE disabled Update interrupt_request when external interupt pends for STATUS_PIE disabled. Otherwise on icount enabled nios2 target there will be cpu abort when guest code changes state register with wrctl instruction. Signed-off-by: Wentong Wu <wentong.wu@intel.com>