| Message ID | 20200611095804.22026-1-f.suligoi@asem.it (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | doc: devicetree: bindings: fix spelling mistake | expand |
Acked-by: Guo Ren <guoren@kernel.org> On Thu, Jun 11, 2020 at 5:58 PM Flavio Suligoi <f.suligoi@asem.it> wrote: > > Fix typo: "triger" --> "trigger" > > Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> > --- > Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt | 2 +- > .../devicetree/bindings/interrupt-controller/csky,mpintc.txt | 2 +- > Documentation/devicetree/bindings/timer/csky,mptimer.txt | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt > index ba455589f869..e1c49b660d3a 100644 > --- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt > +++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt > @@ -12,7 +12,7 @@ Required properties for the top level node: > Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. > - #interrupt-cells : Specifies the number of cells needed to encode an > interrupt. Should be 2. The first cell defines the interrupt number, > - the second encodes the triger flags encoded as described in > + the second encodes the trigger flags encoded as described in > Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > - compatible: > - "mediatek,mt7621-gpio" for Mediatek controllers > diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt > index e13405355166..e6bbcae4d07f 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt > +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt > @@ -10,7 +10,7 @@ Interrupt number definition: > 16-31 : private irq, and we use 16 as the co-processor timer. > 31-1024: common irq for soc ip. > > -Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h) > +Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h) > IRQ_TYPE_LEVEL_HIGH (default) > IRQ_TYPE_LEVEL_LOW > IRQ_TYPE_EDGE_RISING > diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt > index 15cfec08fbb8..f5c7e99cf52b 100644 > --- a/Documentation/devicetree/bindings/timer/csky,mptimer.txt > +++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt > @@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr. > - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer. > - PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg. > - PTIM_CCVR "cr<3, 14>" Current counter value reg. > - - PTIM_LVR "cr<6, 14>" Window value reg to triger next event. > + - PTIM_LVR "cr<6, 14>" Window value reg to trigger next event. > > ============================== > timer node bindings definition > -- > 2.17.1 >
diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt index ba455589f869..e1c49b660d3a 100644 --- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt @@ -12,7 +12,7 @@ Required properties for the top level node: Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt. Should be 2. The first cell defines the interrupt number, - the second encodes the triger flags encoded as described in + the second encodes the trigger flags encoded as described in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - compatible: - "mediatek,mt7621-gpio" for Mediatek controllers diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt index e13405355166..e6bbcae4d07f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt @@ -10,7 +10,7 @@ Interrupt number definition: 16-31 : private irq, and we use 16 as the co-processor timer. 31-1024: common irq for soc ip. -Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h) +Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h) IRQ_TYPE_LEVEL_HIGH (default) IRQ_TYPE_LEVEL_LOW IRQ_TYPE_EDGE_RISING diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt index 15cfec08fbb8..f5c7e99cf52b 100644 --- a/Documentation/devicetree/bindings/timer/csky,mptimer.txt +++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt @@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr. - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer. - PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg. - PTIM_CCVR "cr<3, 14>" Current counter value reg. - - PTIM_LVR "cr<6, 14>" Window value reg to triger next event. + - PTIM_LVR "cr<6, 14>" Window value reg to trigger next event. ============================== timer node bindings definition
Fix typo: "triger" --> "trigger" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> --- Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt | 2 +- .../devicetree/bindings/interrupt-controller/csky,mpintc.txt | 2 +- Documentation/devicetree/bindings/timer/csky,mptimer.txt | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)