diff mbox series

[v4,7/9] media: i2c: adv748x: Adjust TXA data lanes number

Message ID 20200611161651.264633-8-jacopo+renesas@jmondi.org (mailing list archive)
State Superseded
Delegated to: Kieran Bingham
Headers show
Series v4l2-subdev: Introduce [g|s]et_mbus_format pad op | expand

Commit Message

Jacopo Mondi June 11, 2020, 4:16 p.m. UTC
When outputting SD-Core output through the TXA MIPI CSI-2 interface,
the number of enabled data lanes should be reduced in order to guarantee
the two video format produced by the SD-Core (480i and 576i) generate a
MIPI CSI-2 link clock frequency compatible with the MIPI D-PHY
specifications.

Limit the number of enabled data lanes to 2, which is guaranteed to
support 480i and 576i formats.

Cache the number of enabled data lanes to be able to report it through
the new get_mbus_config operation.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/adv748x/adv748x-core.c | 31 ++++++++++++++++++------
 drivers/media/i2c/adv748x/adv748x.h      |  1 +
 2 files changed, 25 insertions(+), 7 deletions(-)

Comments

Kieran Bingham June 15, 2020, 9:08 a.m. UTC | #1
Hi Jacopo,

On 11/06/2020 17:16, Jacopo Mondi wrote:
> When outputting SD-Core output through the TXA MIPI CSI-2 interface,
> the number of enabled data lanes should be reduced in order to guarantee
> the two video format produced by the SD-Core (480i and 576i) generate a

s/the/that the/
s/format/formats/

> MIPI CSI-2 link clock frequency compatible with the MIPI D-PHY
> specifications.
> 
> Limit the number of enabled data lanes to 2, which is guaranteed to
> support 480i and 576i formats.
> 
> Cache the number of enabled data lanes to be able to report it through
> the new get_mbus_config operation.
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/media/i2c/adv748x/adv748x-core.c | 31 ++++++++++++++++++------
>  drivers/media/i2c/adv748x/adv748x.h      |  1 +
>  2 files changed, 25 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index 23e02ff27b17..1fe7f97c6d52 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -241,10 +241,10 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
>  	int ret = 0;
>  
>  	/* Enable n-lane MIPI */
> -	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
> +	adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret);
>  
>  	/* Set Auto DPHY Timing */
> -	adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
> +	adv748x_write_check(state, page, 0x00, 0xa0 | tx->active_lanes, &ret);
>  
>  	/* ADI Required Write */
>  	if (tx->src == &state->hdmi.sd) {
> @@ -270,7 +270,7 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
>  	usleep_range(2000, 2500);
>  
>  	/* Power-up CSI-TX */
> -	adv748x_write_check(state, page, 0x00, 0x20 | tx->num_lanes, &ret);
> +	adv748x_write_check(state, page, 0x00, 0x20 | tx->active_lanes, &ret);
>  	usleep_range(1000, 1500);
>  
>  	/* ADI Required Writes */
> @@ -292,7 +292,7 @@ static int adv748x_power_down_tx(struct adv748x_csi2 *tx)
>  	adv748x_write_check(state, page, 0x1e, 0x00, &ret);
>  
>  	/* Enable n-lane MIPI */
> -	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
> +	adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret);
>  
>  	/* i2c_mipi_pll_en - 1'b1 */
>  	adv748x_write_check(state, page, 0xda, 0x01, &ret);
> @@ -357,14 +357,29 @@ static int adv748x_link_setup(struct media_entity *entity,
>  	if (state->afe.tx) {
>  		/* AFE Requires TXA enabled, even when output to TXB */
>  		io10 |= ADV748X_IO_10_CSI4_EN;
> -		if (is_txa(tx))
> +		if (is_txa(tx)) {
> +			/*
> +			 * Output from the SD-core (480i and 576i) from the TXA
> +			 * interface requires reducing the number of enabled
> +			 * data lanes in order to guarantee a valid link
> +			 * frequency.
> +			 */
> +			tx->active_lanes = min(tx->num_lanes, 2U);
>  			io10 |= ADV748X_IO_10_CSI4_IN_SEL_AFE;
> -		else
> +		} else {
> +			/* TXB has a single data lane, no need to adjust. */

Shouldn't tx->active_lanes still be set here though?

Ah, no - I see it's set as a default when parsed in
adv748x_parse_csi2_lanes().

Ok - that's fine by me then.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

>  			io10 |= ADV748X_IO_10_CSI1_EN;
> +		}
>  	}
>  
> -	if (state->hdmi.tx)
> +	if (state->hdmi.tx) {
> +		/*
> +		 * Restore the number of active lanes, in case we have gone
> +		 * through an AFE->TXA streaming sessions.
> +		 */
> +		tx->active_lanes = tx->num_lanes;
>  		io10 |= ADV748X_IO_10_CSI4_EN;
> +	}
>  
>  	return io_clrset(state, ADV748X_IO_10, io10_mask, io10);
>  }
> @@ -596,6 +611,7 @@ static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
>  		}
>  
>  		state->txa.num_lanes = num_lanes;
> +		state->txa.active_lanes = num_lanes;
>  		adv_dbg(state, "TXA: using %u lanes\n", state->txa.num_lanes);
>  	}
>  
> @@ -607,6 +623,7 @@ static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
>  		}
>  
>  		state->txb.num_lanes = num_lanes;
> +		state->txb.active_lanes = num_lanes;
>  		adv_dbg(state, "TXB: using %u lanes\n", state->txb.num_lanes);
>  	}
>  
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index fccb388ce179..1061f425ece5 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -79,6 +79,7 @@ struct adv748x_csi2 {
>  	unsigned int page;
>  	unsigned int port;
>  	unsigned int num_lanes;
> +	unsigned int active_lanes;
>  
>  	struct media_pad pads[ADV748X_CSI2_NR_PADS];
>  	struct v4l2_ctrl_handler ctrl_hdl;
>
diff mbox series

Patch

diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index 23e02ff27b17..1fe7f97c6d52 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -241,10 +241,10 @@  static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
 	int ret = 0;
 
 	/* Enable n-lane MIPI */
-	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
+	adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret);
 
 	/* Set Auto DPHY Timing */
-	adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
+	adv748x_write_check(state, page, 0x00, 0xa0 | tx->active_lanes, &ret);
 
 	/* ADI Required Write */
 	if (tx->src == &state->hdmi.sd) {
@@ -270,7 +270,7 @@  static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
 	usleep_range(2000, 2500);
 
 	/* Power-up CSI-TX */
-	adv748x_write_check(state, page, 0x00, 0x20 | tx->num_lanes, &ret);
+	adv748x_write_check(state, page, 0x00, 0x20 | tx->active_lanes, &ret);
 	usleep_range(1000, 1500);
 
 	/* ADI Required Writes */
@@ -292,7 +292,7 @@  static int adv748x_power_down_tx(struct adv748x_csi2 *tx)
 	adv748x_write_check(state, page, 0x1e, 0x00, &ret);
 
 	/* Enable n-lane MIPI */
-	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
+	adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret);
 
 	/* i2c_mipi_pll_en - 1'b1 */
 	adv748x_write_check(state, page, 0xda, 0x01, &ret);
@@ -357,14 +357,29 @@  static int adv748x_link_setup(struct media_entity *entity,
 	if (state->afe.tx) {
 		/* AFE Requires TXA enabled, even when output to TXB */
 		io10 |= ADV748X_IO_10_CSI4_EN;
-		if (is_txa(tx))
+		if (is_txa(tx)) {
+			/*
+			 * Output from the SD-core (480i and 576i) from the TXA
+			 * interface requires reducing the number of enabled
+			 * data lanes in order to guarantee a valid link
+			 * frequency.
+			 */
+			tx->active_lanes = min(tx->num_lanes, 2U);
 			io10 |= ADV748X_IO_10_CSI4_IN_SEL_AFE;
-		else
+		} else {
+			/* TXB has a single data lane, no need to adjust. */
 			io10 |= ADV748X_IO_10_CSI1_EN;
+		}
 	}
 
-	if (state->hdmi.tx)
+	if (state->hdmi.tx) {
+		/*
+		 * Restore the number of active lanes, in case we have gone
+		 * through an AFE->TXA streaming sessions.
+		 */
+		tx->active_lanes = tx->num_lanes;
 		io10 |= ADV748X_IO_10_CSI4_EN;
+	}
 
 	return io_clrset(state, ADV748X_IO_10, io10_mask, io10);
 }
@@ -596,6 +611,7 @@  static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
 		}
 
 		state->txa.num_lanes = num_lanes;
+		state->txa.active_lanes = num_lanes;
 		adv_dbg(state, "TXA: using %u lanes\n", state->txa.num_lanes);
 	}
 
@@ -607,6 +623,7 @@  static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
 		}
 
 		state->txb.num_lanes = num_lanes;
+		state->txb.active_lanes = num_lanes;
 		adv_dbg(state, "TXB: using %u lanes\n", state->txb.num_lanes);
 	}
 
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index fccb388ce179..1061f425ece5 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -79,6 +79,7 @@  struct adv748x_csi2 {
 	unsigned int page;
 	unsigned int port;
 	unsigned int num_lanes;
+	unsigned int active_lanes;
 
 	struct media_pad pads[ADV748X_CSI2_NR_PADS];
 	struct v4l2_ctrl_handler ctrl_hdl;