mbox series

[v2,0/8] ath11k: Add IPQ6018 support

Message ID 1591709581-18039-1-git-send-email-akolli@codeaurora.org (mailing list archive)
Headers show
Series ath11k: Add IPQ6018 support | expand

Message

Anilkumar Kolli June 9, 2020, 1:32 p.m. UTC 
IPQ6018 has a 5G radio and 2G radio with 2x2
and shares IPQ8074 configuration.

Tested on: IPQ6018 WLAN.HK.2.2-02134-QCAHKSWPL_SILICONZ-1
Tested on: IPQ8074 WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 

Anilkumar Kolli (8):
  dt: bindings: net: update compatible for ath11k
  ath11k: update firmware files read path
  ath11k: rename default board file
  ath11k: add IPQ6018 support
  ath11k: define max_radios in hw_params
  ath11k: add hw_ops for pdev id to hw_mac mapping
  ath11k: add ce services for IPQ6018
  ath11k: Add bdf-addr in hw_params

 .../bindings/net/wireless/qcom,ath11k.yaml         |   4 +-
 drivers/net/wireless/ath/ath11k/Makefile           |   3 +-
 drivers/net/wireless/ath/ath11k/ahb.c              | 151 ++++++++++++++++++---
 drivers/net/wireless/ath/ath11k/core.c             |  78 +++++++----
 drivers/net/wireless/ath/ath11k/core.h             |   2 +-
 drivers/net/wireless/ath/ath11k/dp_rx.c            |   2 +-
 drivers/net/wireless/ath/ath11k/htc.c              |   2 +-
 drivers/net/wireless/ath/ath11k/hw.c               |  34 +++++
 drivers/net/wireless/ath/ath11k/hw.h               |  31 ++++-
 drivers/net/wireless/ath/ath11k/mac.c              |   2 +-
 drivers/net/wireless/ath/ath11k/qmi.c              |   6 +-
 drivers/net/wireless/ath/ath11k/qmi.h              |   1 -
 drivers/net/wireless/ath/ath11k/reg.c              |   2 +-
 drivers/net/wireless/ath/ath11k/wmi.c              |   4 +-
 14 files changed, 266 insertions(+), 56 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath11k/hw.c

V2:
 - Added devicetree reviewers

Comments

Kalle Valo June 16, 2020, 9:13 a.m. UTC | #1 
Anilkumar Kolli <akolli@codeaurora.org> writes:

> IPQ6018 has a 5G radio and 2G radio with 2x2
> and shares IPQ8074 configuration.
>
> Tested on: IPQ6018 WLAN.HK.2.2-02134-QCAHKSWPL_SILICONZ-1
> Tested on: IPQ8074 WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 

To get the multiple hw support faster in (I need them also for QCA6390
patches) I split this into multiple sets:

>   ath11k: update firmware files read path
>   ath11k: rename default board file

These are now applied.

>   ath11k: define max_radios in hw_params
>   ath11k: add hw_ops for pdev id to hw_mac mapping
>   ath11k: Add bdf-addr in hw_params

I'll modify these a bit, remove all IPQ6018 references from them and
then submit them myself.

>   dt: bindings: net: update compatible for ath11k
>   ath11k: add ce services for IPQ6018

Anil, please resubmit these as v3 based on the comments.

>   ath11k: add IPQ6018 support

Anil, add this as the last patch in your v3 series. And do note that I
will split the part adding ath11k_init_hw_params() function to a
separate patch, so no need to include it in this patch anymore.