diff mbox series

[v2] usb: gadget: u_serial: improve performance for large data

Message ID 1592362007-7120-1-git-send-email-macpaul.lin@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [v2] usb: gadget: u_serial: improve performance for large data | expand

Commit Message

Macpaul Lin June 17, 2020, 2:46 a.m. UTC
Nowadays some embedded systems use VCOM to transfer large log and data.
Take LTE MODEM as an example, during the long debugging stage, large
log and data were transfer through VCOM when doing field try or in
operator's lab. Here we suggest slightly increase the transfer buffer
in u_serial.c for performance improving.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
 drivers/usb/gadget/function/u_serial.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Greg Kroah-Hartman June 17, 2020, 5:14 a.m. UTC | #1
On Wed, Jun 17, 2020 at 10:46:47AM +0800, Macpaul Lin wrote:
> Nowadays some embedded systems use VCOM to transfer large log and data.
> Take LTE MODEM as an example, during the long debugging stage, large
> log and data were transfer through VCOM when doing field try or in
> operator's lab. Here we suggest slightly increase the transfer buffer
> in u_serial.c for performance improving.
> 
> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> ---
>  drivers/usb/gadget/function/u_serial.c |    5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

What changed from v1?  Always put that below the --- line as the
documentation asks for.

v3?
Macpaul Lin June 17, 2020, 5:34 a.m. UTC | #2
On Wed, 2020-06-17 at 07:14 +0200, Greg Kroah-Hartman wrote:
> On Wed, Jun 17, 2020 at 10:46:47AM +0800, Macpaul Lin wrote:
> > Nowadays some embedded systems use VCOM to transfer large log and data.
> > Take LTE MODEM as an example, during the long debugging stage, large
> > log and data were transfer through VCOM when doing field try or in
> > operator's lab. Here we suggest slightly increase the transfer buffer
> > in u_serial.c for performance improving.
> > 
> > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> > ---
> >  drivers/usb/gadget/function/u_serial.c |    5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> What changed from v1?  Always put that below the --- line as the
> documentation asks for.
> 
> v3?
Sorry, I just forget to add change log, I'll send v3 later.

Thanks!

BR,
Macpaul Lin
diff mbox series

Patch

diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 3cfc6e2..d7912a9 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -80,6 +80,7 @@ 
 #define QUEUE_SIZE		16
 #define WRITE_BUF_SIZE		8192		/* TX only */
 #define GS_CONSOLE_BUF_SIZE	8192
+#define REQ_BUF_SIZE		4096
 
 /* console info */
 struct gs_console {
@@ -247,7 +248,7 @@  static int gs_start_tx(struct gs_port *port)
 			break;
 
 		req = list_entry(pool->next, struct usb_request, list);
-		len = gs_send_packet(port, req->buf, in->maxpacket);
+		len = gs_send_packet(port, req->buf, REQ_BUF_SIZE);
 		if (len == 0) {
 			wake_up_interruptible(&port->drain_wait);
 			break;
@@ -514,7 +515,7 @@  static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
 	 * be as speedy as we might otherwise be.
 	 */
 	for (i = 0; i < n; i++) {
-		req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
+		req = gs_alloc_req(ep, REQ_BUF_SIZE, GFP_ATOMIC);
 		if (!req)
 			return list_empty(head) ? -ENOMEM : 0;
 		req->complete = fn;