diff mbox series

[v2,22/22] drm: mxsfb: Support the alpha plane

Message ID 20200530031015.15492-23-laurent.pinchart@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series drm: mxsfb: Add i.MX7 support | expand

Commit Message

Laurent Pinchart May 30, 2020, 3:10 a.m. UTC
The LCDIF in the i.MX6SX and i.MX7 have a second plane called the alpha
plane. Support it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
Changes since v1:

- Split whitespace cleanup to a separate patch
---
 drivers/gpu/drm/mxsfb/mxsfb_drv.c  |   3 +
 drivers/gpu/drm/mxsfb/mxsfb_drv.h  |   6 +-
 drivers/gpu/drm/mxsfb/mxsfb_kms.c  | 129 +++++++++++++++++++++++++----
 drivers/gpu/drm/mxsfb/mxsfb_regs.h |  22 +++++
 4 files changed, 144 insertions(+), 16 deletions(-)

Comments

Emil Velikov May 31, 2020, 4:54 p.m. UTC | #1
HI Laurent,

From a quick glance the series looks really good and neat. Then again,
I don't know much about the hardware to provide meaningful review.

A couple of small ideas below.

On Sat, 30 May 2020 at 04:11, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:

> +#define LCDC_AS_BUF                    0x220
> +#define LCDC_AS_NEXT_BUF               0x230

s/LCDC_AS_BUF/LCDC_AS_CUR_BUF/ - to stay consistent with the primary
plane name scheme.

Would it make sense to store the above registers in mxsfb_devdata,
just like we do for the primary planes?

HTH
Emil
Laurent Pinchart June 2, 2020, 10:42 p.m. UTC | #2
Hi Emil,

On Sun, May 31, 2020 at 05:54:04PM +0100, Emil Velikov wrote:
> HI Laurent,
> 
> From a quick glance the series looks really good and neat.

Thank you :-)

> Then again, I don't know much about the hardware to provide meaningful
> review.
>
> A couple of small ideas below.
> 
> On Sat, 30 May 2020 at 04:11, Laurent Pinchart wrote:
> 
> > +#define LCDC_AS_BUF                    0x220
> > +#define LCDC_AS_NEXT_BUF               0x230
> 
> s/LCDC_AS_BUF/LCDC_AS_CUR_BUF/ - to stay consistent with the primary
> plane name scheme.

The register names come directly from the datasheet (and yes, the
datasheet uses CUR_BUF and NEXT_BUF for the primary plane, and BUF and
NEXT_BUF for the overlay plane :-S). I'd thus rather keep them aligned
with the documentation.

> Would it make sense to store the above registers in mxsfb_devdata,
> just like we do for the primary planes?

The reason the register addresses are stored in mxsfb_devdata for the
primary plane is because they differ between hardware revisions (don't
they teach hardware engineers in school these days *not* to move
registers around ? :-)). The overlay plane is only supported in the
latest versions of the IP core, and are always located at the same
address as far as I can tell. I don't think we need an extra level of
indirection.
Emil Velikov June 5, 2020, 2:07 p.m. UTC | #3
On Tue, 2 Jun 2020 at 23:43, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Emil,
>
> On Sun, May 31, 2020 at 05:54:04PM +0100, Emil Velikov wrote:
> > HI Laurent,
> >
> > From a quick glance the series looks really good and neat.
>
> Thank you :-)
>
> > Then again, I don't know much about the hardware to provide meaningful
> > review.
> >
> > A couple of small ideas below.
> >
> > On Sat, 30 May 2020 at 04:11, Laurent Pinchart wrote:
> >
> > > +#define LCDC_AS_BUF                    0x220
> > > +#define LCDC_AS_NEXT_BUF               0x230
> >
> > s/LCDC_AS_BUF/LCDC_AS_CUR_BUF/ - to stay consistent with the primary
> > plane name scheme.
>
> The register names come directly from the datasheet (and yes, the
> datasheet uses CUR_BUF and NEXT_BUF for the primary plane, and BUF and
> NEXT_BUF for the overlay plane :-S). I'd thus rather keep them aligned
> with the documentation.
>
> > Would it make sense to store the above registers in mxsfb_devdata,
> > just like we do for the primary planes?
>
> The reason the register addresses are stored in mxsfb_devdata for the
> primary plane is because they differ between hardware revisions (don't
> they teach hardware engineers in school these days *not* to move
> registers around ? :-)). The overlay plane is only supported in the
> latest versions of the IP core, and are always located at the same
> address as far as I can tell. I don't think we need an extra level of
> indirection.
>
Right, makes sense. Thanks for the information.

-Emil
Stefan Agner June 17, 2020, 4:08 p.m. UTC | #4
On 2020-05-30 05:10, Laurent Pinchart wrote:
> The LCDIF in the i.MX6SX and i.MX7 have a second plane called the alpha
> plane. Support it.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Looks good to me.

Reviewed-by: Stefan Agner <stefan@agner.ch>

--
Stefan

> ---
> Changes since v1:
> 
> - Split whitespace cleanup to a separate patch
> ---
>  drivers/gpu/drm/mxsfb/mxsfb_drv.c  |   3 +
>  drivers/gpu/drm/mxsfb/mxsfb_drv.h  |   6 +-
>  drivers/gpu/drm/mxsfb/mxsfb_kms.c  | 129 +++++++++++++++++++++++++----
>  drivers/gpu/drm/mxsfb/mxsfb_regs.h |  22 +++++
>  4 files changed, 144 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> index ed8e3f7bc27c..ab3a212375f1 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> @@ -49,6 +49,7 @@ static const struct mxsfb_devdata mxsfb_devdata[] = {
>  		.next_buf	= LCDC_V3_NEXT_BUF,
>  		.hs_wdth_mask	= 0xff,
>  		.hs_wdth_shift	= 24,
> +		.has_overlay	= false,
>  	},
>  	[MXSFB_V4] = {
>  		.transfer_count	= LCDC_V4_TRANSFER_COUNT,
> @@ -56,6 +57,7 @@ static const struct mxsfb_devdata mxsfb_devdata[] = {
>  		.next_buf	= LCDC_V4_NEXT_BUF,
>  		.hs_wdth_mask	= 0x3fff,
>  		.hs_wdth_shift	= 18,
> +		.has_overlay	= false,
>  	},
>  	[MXSFB_V6] = {
>  		.transfer_count	= LCDC_V4_TRANSFER_COUNT,
> @@ -63,6 +65,7 @@ static const struct mxsfb_devdata mxsfb_devdata[] = {
>  		.next_buf	= LCDC_V4_NEXT_BUF,
>  		.hs_wdth_mask	= 0x3fff,
>  		.hs_wdth_shift	= 18,
> +		.has_overlay	= true,
>  	},
>  };
>  
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> index f883b56caed3..399d23e91ed1 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> @@ -21,6 +21,7 @@ struct mxsfb_devdata {
>  	unsigned int	next_buf;
>  	unsigned int	hs_wdth_mask;
>  	unsigned int	hs_wdth_shift;
> +	bool		has_overlay;
>  };
>  
>  struct mxsfb_drm_private {
> @@ -32,7 +33,10 @@ struct mxsfb_drm_private {
>  	struct clk			*clk_disp_axi;
>  
>  	struct drm_device		*drm;
> -	struct drm_plane		plane;
> +	struct {
> +		struct drm_plane	primary;
> +		struct drm_plane	overlay;
> +	} planes;
>  	struct drm_crtc			crtc;
>  	struct drm_encoder		encoder;
>  	struct drm_connector		*connector;
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> index f81f8c222c13..c9c394f7cbe2 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> @@ -169,9 +169,9 @@ static int mxsfb_reset_block(struct
> mxsfb_drm_private *mxsfb)
>  	return clear_poll_bit(mxsfb->base + LCDC_CTRL, CTRL_CLKGATE);
>  }
>  
> -static dma_addr_t mxsfb_get_fb_paddr(struct mxsfb_drm_private *mxsfb)
> +static dma_addr_t mxsfb_get_fb_paddr(struct drm_plane *plane)
>  {
> -	struct drm_framebuffer *fb = mxsfb->plane.state->fb;
> +	struct drm_framebuffer *fb = plane->state->fb;
>  	struct drm_gem_cma_object *gem;
>  
>  	if (!fb)
> @@ -206,6 +206,9 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
>  	/* Clear the FIFOs */
>  	writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET);
>  
> +	if (mxsfb->devdata->has_overlay)
> +		writel(0, mxsfb->base + LCDC_AS_CTRL);
> +
>  	mxsfb_set_formats(mxsfb);
>  
>  	clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
> @@ -313,7 +316,7 @@ static void mxsfb_crtc_atomic_enable(struct drm_crtc *crtc,
>  	mxsfb_crtc_mode_set_nofb(mxsfb);
>  
>  	/* Write cur_buf as well to avoid an initial corrupt frame */
> -	paddr = mxsfb_get_fb_paddr(mxsfb);
> +	paddr = mxsfb_get_fb_paddr(crtc->primary);
>  	if (paddr) {
>  		writel(paddr, mxsfb->base + mxsfb->devdata->cur_buf);
>  		writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
> @@ -410,20 +413,85 @@ static int mxsfb_plane_atomic_check(struct
> drm_plane *plane,
>  						   false, true);
>  }
>  
> -static void mxsfb_plane_atomic_update(struct drm_plane *plane,
> -				      struct drm_plane_state *old_pstate)
> +static void mxsfb_plane_primary_atomic_update(struct drm_plane *plane,
> +					      struct drm_plane_state *old_pstate)
>  {
>  	struct mxsfb_drm_private *mxsfb = to_mxsfb_drm_private(plane->dev);
>  	dma_addr_t paddr;
>  
> -	paddr = mxsfb_get_fb_paddr(mxsfb);
> +	paddr = mxsfb_get_fb_paddr(plane);
>  	if (paddr)
>  		writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
>  }
>  
> -static const struct drm_plane_helper_funcs mxsfb_plane_helper_funcs = {
> +static void mxsfb_plane_overlay_atomic_update(struct drm_plane *plane,
> +					      struct drm_plane_state *old_pstate)
> +{
> +	struct mxsfb_drm_private *mxsfb = to_mxsfb_drm_private(plane->dev);
> +	struct drm_plane_state *state = plane->state;
> +	dma_addr_t paddr;
> +	u32 ctrl;
> +
> +	paddr = mxsfb_get_fb_paddr(plane);
> +	if (!paddr) {
> +		writel(0, mxsfb->base + LCDC_AS_CTRL);
> +		return;
> +	}
> +
> +	/*
> +	 * HACK: The hardware seems to output 64 bytes of data of unknown
> +	 * origin, and then to proceed with the framebuffer. Until the reason
> +	 * is understood, live with the 16 initial invalid pixels on the first
> +	 * line and start 64 bytes within the framebuffer.
> +	 */
> +	paddr += 64;
> +
> +	writel(paddr, mxsfb->base + LCDC_AS_NEXT_BUF);
> +
> +	/*
> +	 * If the plane was previously disabled, write LCDC_AS_BUF as well to
> +	 * provide the first buffer.
> +	 */
> +	if (!old_pstate->fb)
> +		writel(paddr, mxsfb->base + LCDC_AS_BUF);
> +
> +	ctrl = AS_CTRL_AS_ENABLE | AS_CTRL_ALPHA(255);
> +
> +	switch (state->fb->format->format) {
> +	case DRM_FORMAT_XRGB4444:
> +		ctrl |= AS_CTRL_FORMAT_RGB444 | AS_CTRL_ALPHA_CTRL_OVERRIDE;
> +		break;
> +	case DRM_FORMAT_ARGB4444:
> +		ctrl |= AS_CTRL_FORMAT_ARGB4444 | AS_CTRL_ALPHA_CTRL_EMBEDDED;
> +		break;
> +	case DRM_FORMAT_XRGB1555:
> +		ctrl |= AS_CTRL_FORMAT_RGB555 | AS_CTRL_ALPHA_CTRL_OVERRIDE;
> +		break;
> +	case DRM_FORMAT_ARGB1555:
> +		ctrl |= AS_CTRL_FORMAT_ARGB1555 | AS_CTRL_ALPHA_CTRL_EMBEDDED;
> +		break;
> +	case DRM_FORMAT_RGB565:
> +		ctrl |= AS_CTRL_FORMAT_RGB565 | AS_CTRL_ALPHA_CTRL_OVERRIDE;
> +		break;
> +	case DRM_FORMAT_XRGB8888:
> +		ctrl |= AS_CTRL_FORMAT_RGB888 | AS_CTRL_ALPHA_CTRL_OVERRIDE;
> +		break;
> +	case DRM_FORMAT_ARGB8888:
> +		ctrl |= AS_CTRL_FORMAT_ARGB8888 | AS_CTRL_ALPHA_CTRL_EMBEDDED;
> +		break;
> +	}
> +
> +	writel(ctrl, mxsfb->base + LCDC_AS_CTRL);
> +}
> +
> +static const struct drm_plane_helper_funcs mxsfb_plane_primary_helper_funcs = {
>  	.atomic_check = mxsfb_plane_atomic_check,
> -	.atomic_update = mxsfb_plane_atomic_update,
> +	.atomic_update = mxsfb_plane_primary_atomic_update,
> +};
> +
> +static const struct drm_plane_helper_funcs mxsfb_plane_overlay_helper_funcs = {
> +	.atomic_check = mxsfb_plane_atomic_check,
> +	.atomic_update = mxsfb_plane_overlay_atomic_update,
>  };
>  
>  static const struct drm_plane_funcs mxsfb_plane_funcs = {
> @@ -435,27 +503,58 @@ static const struct drm_plane_funcs mxsfb_plane_funcs = {
>  	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state,
>  };
>  
> -static const uint32_t mxsfb_formats[] = {
> +static const uint32_t mxsfb_primary_plane_formats[] = {
> +	DRM_FORMAT_RGB565,
>  	DRM_FORMAT_XRGB8888,
> -	DRM_FORMAT_RGB565
>  };
>  
> +static const uint32_t mxsfb_overlay_plane_formats[] = {
> +	DRM_FORMAT_XRGB4444,
> +	DRM_FORMAT_ARGB4444,
> +	DRM_FORMAT_XRGB1555,
> +	DRM_FORMAT_ARGB1555,
> +	DRM_FORMAT_RGB565,
> +	DRM_FORMAT_XRGB8888,
> +	DRM_FORMAT_ARGB8888,
> +};
> +
> +/*
> -----------------------------------------------------------------------------
> + * Initialization
> + */
> +
>  int mxsfb_kms_init(struct mxsfb_drm_private *mxsfb)
>  {
>  	struct drm_encoder *encoder = &mxsfb->encoder;
> -	struct drm_plane *plane = &mxsfb->plane;
>  	struct drm_crtc *crtc = &mxsfb->crtc;
>  	int ret;
>  
> -	drm_plane_helper_add(plane, &mxsfb_plane_helper_funcs);
> -	ret = drm_universal_plane_init(mxsfb->drm, plane, 0, &mxsfb_plane_funcs,
> -				       mxsfb_formats, ARRAY_SIZE(mxsfb_formats),
> +	drm_plane_helper_add(&mxsfb->planes.primary,
> +			     &mxsfb_plane_primary_helper_funcs);
> +	ret = drm_universal_plane_init(mxsfb->drm, &mxsfb->planes.primary, 1,
> +				       &mxsfb_plane_funcs,
> +				       mxsfb_primary_plane_formats,
> +				       ARRAY_SIZE(mxsfb_primary_plane_formats),
>  				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
>  	if (ret)
>  		return ret;
>  
> +	if (mxsfb->devdata->has_overlay) {
> +		drm_plane_helper_add(&mxsfb->planes.overlay,
> +				     &mxsfb_plane_overlay_helper_funcs);
> +		ret = drm_universal_plane_init(mxsfb->drm,
> +					       &mxsfb->planes.overlay, 1,
> +					       &mxsfb_plane_funcs,
> +					       mxsfb_overlay_plane_formats,
> +					       ARRAY_SIZE(mxsfb_overlay_plane_formats),
> +					       NULL, DRM_PLANE_TYPE_OVERLAY,
> +					       NULL);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	drm_crtc_helper_add(crtc, &mxsfb_crtc_helper_funcs);
> -	ret = drm_crtc_init_with_planes(mxsfb->drm, crtc, plane, NULL,
> +	ret = drm_crtc_init_with_planes(mxsfb->drm, crtc,
> +					&mxsfb->planes.primary, NULL,
>  					&mxsfb_crtc_funcs, NULL);
>  	if (ret)
>  		return ret;
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_regs.h
> b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
> index 8ebb52bb1b46..55d28a27f912 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_regs.h
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
> @@ -27,6 +27,11 @@
>  #define LCDC_VDCTRL4			0xb0
>  #define LCDC_V4_DEBUG0			0x1d0
>  #define LCDC_V3_DEBUG0			0x1f0
> +#define LCDC_AS_CTRL			0x210
> +#define LCDC_AS_BUF			0x220
> +#define LCDC_AS_NEXT_BUF		0x230
> +#define LCDC_AS_CLRKEYLOW		0x240
> +#define LCDC_AS_CLRKEYHIGH		0x250
>  
>  #define CTRL_SFTRST			BIT(31)
>  #define CTRL_CLKGATE			BIT(30)
> @@ -90,6 +95,23 @@
>  #define DEBUG0_HSYNC			BIT(26)
>  #define DEBUG0_VSYNC			BIT(25)
>  
> +#define AS_CTRL_PS_DISABLE		BIT(23)
> +#define AS_CTRL_ALPHA_INVERT		BIT(20)
> +#define AS_CTRL_ALPHA(a)		(((a) & 0xff) << 8)
> +#define AS_CTRL_FORMAT_RGB565		(0xe << 4)
> +#define AS_CTRL_FORMAT_RGB444		(0xd << 4)
> +#define AS_CTRL_FORMAT_RGB555		(0xc << 4)
> +#define AS_CTRL_FORMAT_ARGB4444		(0x9 << 4)
> +#define AS_CTRL_FORMAT_ARGB1555		(0x8 << 4)
> +#define AS_CTRL_FORMAT_RGB888		(0x4 << 4)
> +#define AS_CTRL_FORMAT_ARGB8888		(0x0 << 4)
> +#define AS_CTRL_ENABLE_COLORKEY		BIT(3)
> +#define AS_CTRL_ALPHA_CTRL_ROP		(3 << 1)
> +#define AS_CTRL_ALPHA_CTRL_MULTIPLY	(2 << 1)
> +#define AS_CTRL_ALPHA_CTRL_OVERRIDE	(1 << 1)
> +#define AS_CTRL_ALPHA_CTRL_EMBEDDED	(0 << 1)
> +#define AS_CTRL_AS_ENABLE		BIT(0)
> +
>  #define MXSFB_MIN_XRES			120
>  #define MXSFB_MIN_YRES			120
>  #define MXSFB_MAX_XRES			0xffff
diff mbox series

Patch

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
index ed8e3f7bc27c..ab3a212375f1 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -49,6 +49,7 @@  static const struct mxsfb_devdata mxsfb_devdata[] = {
 		.next_buf	= LCDC_V3_NEXT_BUF,
 		.hs_wdth_mask	= 0xff,
 		.hs_wdth_shift	= 24,
+		.has_overlay	= false,
 	},
 	[MXSFB_V4] = {
 		.transfer_count	= LCDC_V4_TRANSFER_COUNT,
@@ -56,6 +57,7 @@  static const struct mxsfb_devdata mxsfb_devdata[] = {
 		.next_buf	= LCDC_V4_NEXT_BUF,
 		.hs_wdth_mask	= 0x3fff,
 		.hs_wdth_shift	= 18,
+		.has_overlay	= false,
 	},
 	[MXSFB_V6] = {
 		.transfer_count	= LCDC_V4_TRANSFER_COUNT,
@@ -63,6 +65,7 @@  static const struct mxsfb_devdata mxsfb_devdata[] = {
 		.next_buf	= LCDC_V4_NEXT_BUF,
 		.hs_wdth_mask	= 0x3fff,
 		.hs_wdth_shift	= 18,
+		.has_overlay	= true,
 	},
 };
 
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
index f883b56caed3..399d23e91ed1 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
@@ -21,6 +21,7 @@  struct mxsfb_devdata {
 	unsigned int	next_buf;
 	unsigned int	hs_wdth_mask;
 	unsigned int	hs_wdth_shift;
+	bool		has_overlay;
 };
 
 struct mxsfb_drm_private {
@@ -32,7 +33,10 @@  struct mxsfb_drm_private {
 	struct clk			*clk_disp_axi;
 
 	struct drm_device		*drm;
-	struct drm_plane		plane;
+	struct {
+		struct drm_plane	primary;
+		struct drm_plane	overlay;
+	} planes;
 	struct drm_crtc			crtc;
 	struct drm_encoder		encoder;
 	struct drm_connector		*connector;
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_kms.c b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
index f81f8c222c13..c9c394f7cbe2 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
@@ -169,9 +169,9 @@  static int mxsfb_reset_block(struct mxsfb_drm_private *mxsfb)
 	return clear_poll_bit(mxsfb->base + LCDC_CTRL, CTRL_CLKGATE);
 }
 
-static dma_addr_t mxsfb_get_fb_paddr(struct mxsfb_drm_private *mxsfb)
+static dma_addr_t mxsfb_get_fb_paddr(struct drm_plane *plane)
 {
-	struct drm_framebuffer *fb = mxsfb->plane.state->fb;
+	struct drm_framebuffer *fb = plane->state->fb;
 	struct drm_gem_cma_object *gem;
 
 	if (!fb)
@@ -206,6 +206,9 @@  static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 	/* Clear the FIFOs */
 	writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET);
 
+	if (mxsfb->devdata->has_overlay)
+		writel(0, mxsfb->base + LCDC_AS_CTRL);
+
 	mxsfb_set_formats(mxsfb);
 
 	clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
@@ -313,7 +316,7 @@  static void mxsfb_crtc_atomic_enable(struct drm_crtc *crtc,
 	mxsfb_crtc_mode_set_nofb(mxsfb);
 
 	/* Write cur_buf as well to avoid an initial corrupt frame */
-	paddr = mxsfb_get_fb_paddr(mxsfb);
+	paddr = mxsfb_get_fb_paddr(crtc->primary);
 	if (paddr) {
 		writel(paddr, mxsfb->base + mxsfb->devdata->cur_buf);
 		writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
@@ -410,20 +413,85 @@  static int mxsfb_plane_atomic_check(struct drm_plane *plane,
 						   false, true);
 }
 
-static void mxsfb_plane_atomic_update(struct drm_plane *plane,
-				      struct drm_plane_state *old_pstate)
+static void mxsfb_plane_primary_atomic_update(struct drm_plane *plane,
+					      struct drm_plane_state *old_pstate)
 {
 	struct mxsfb_drm_private *mxsfb = to_mxsfb_drm_private(plane->dev);
 	dma_addr_t paddr;
 
-	paddr = mxsfb_get_fb_paddr(mxsfb);
+	paddr = mxsfb_get_fb_paddr(plane);
 	if (paddr)
 		writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
 }
 
-static const struct drm_plane_helper_funcs mxsfb_plane_helper_funcs = {
+static void mxsfb_plane_overlay_atomic_update(struct drm_plane *plane,
+					      struct drm_plane_state *old_pstate)
+{
+	struct mxsfb_drm_private *mxsfb = to_mxsfb_drm_private(plane->dev);
+	struct drm_plane_state *state = plane->state;
+	dma_addr_t paddr;
+	u32 ctrl;
+
+	paddr = mxsfb_get_fb_paddr(plane);
+	if (!paddr) {
+		writel(0, mxsfb->base + LCDC_AS_CTRL);
+		return;
+	}
+
+	/*
+	 * HACK: The hardware seems to output 64 bytes of data of unknown
+	 * origin, and then to proceed with the framebuffer. Until the reason
+	 * is understood, live with the 16 initial invalid pixels on the first
+	 * line and start 64 bytes within the framebuffer.
+	 */
+	paddr += 64;
+
+	writel(paddr, mxsfb->base + LCDC_AS_NEXT_BUF);
+
+	/*
+	 * If the plane was previously disabled, write LCDC_AS_BUF as well to
+	 * provide the first buffer.
+	 */
+	if (!old_pstate->fb)
+		writel(paddr, mxsfb->base + LCDC_AS_BUF);
+
+	ctrl = AS_CTRL_AS_ENABLE | AS_CTRL_ALPHA(255);
+
+	switch (state->fb->format->format) {
+	case DRM_FORMAT_XRGB4444:
+		ctrl |= AS_CTRL_FORMAT_RGB444 | AS_CTRL_ALPHA_CTRL_OVERRIDE;
+		break;
+	case DRM_FORMAT_ARGB4444:
+		ctrl |= AS_CTRL_FORMAT_ARGB4444 | AS_CTRL_ALPHA_CTRL_EMBEDDED;
+		break;
+	case DRM_FORMAT_XRGB1555:
+		ctrl |= AS_CTRL_FORMAT_RGB555 | AS_CTRL_ALPHA_CTRL_OVERRIDE;
+		break;
+	case DRM_FORMAT_ARGB1555:
+		ctrl |= AS_CTRL_FORMAT_ARGB1555 | AS_CTRL_ALPHA_CTRL_EMBEDDED;
+		break;
+	case DRM_FORMAT_RGB565:
+		ctrl |= AS_CTRL_FORMAT_RGB565 | AS_CTRL_ALPHA_CTRL_OVERRIDE;
+		break;
+	case DRM_FORMAT_XRGB8888:
+		ctrl |= AS_CTRL_FORMAT_RGB888 | AS_CTRL_ALPHA_CTRL_OVERRIDE;
+		break;
+	case DRM_FORMAT_ARGB8888:
+		ctrl |= AS_CTRL_FORMAT_ARGB8888 | AS_CTRL_ALPHA_CTRL_EMBEDDED;
+		break;
+	}
+
+	writel(ctrl, mxsfb->base + LCDC_AS_CTRL);
+}
+
+static const struct drm_plane_helper_funcs mxsfb_plane_primary_helper_funcs = {
 	.atomic_check = mxsfb_plane_atomic_check,
-	.atomic_update = mxsfb_plane_atomic_update,
+	.atomic_update = mxsfb_plane_primary_atomic_update,
+};
+
+static const struct drm_plane_helper_funcs mxsfb_plane_overlay_helper_funcs = {
+	.atomic_check = mxsfb_plane_atomic_check,
+	.atomic_update = mxsfb_plane_overlay_atomic_update,
 };
 
 static const struct drm_plane_funcs mxsfb_plane_funcs = {
@@ -435,27 +503,58 @@  static const struct drm_plane_funcs mxsfb_plane_funcs = {
 	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state,
 };
 
-static const uint32_t mxsfb_formats[] = {
+static const uint32_t mxsfb_primary_plane_formats[] = {
+	DRM_FORMAT_RGB565,
 	DRM_FORMAT_XRGB8888,
-	DRM_FORMAT_RGB565
 };
 
+static const uint32_t mxsfb_overlay_plane_formats[] = {
+	DRM_FORMAT_XRGB4444,
+	DRM_FORMAT_ARGB4444,
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
 int mxsfb_kms_init(struct mxsfb_drm_private *mxsfb)
 {
 	struct drm_encoder *encoder = &mxsfb->encoder;
-	struct drm_plane *plane = &mxsfb->plane;
 	struct drm_crtc *crtc = &mxsfb->crtc;
 	int ret;
 
-	drm_plane_helper_add(plane, &mxsfb_plane_helper_funcs);
-	ret = drm_universal_plane_init(mxsfb->drm, plane, 0, &mxsfb_plane_funcs,
-				       mxsfb_formats, ARRAY_SIZE(mxsfb_formats),
+	drm_plane_helper_add(&mxsfb->planes.primary,
+			     &mxsfb_plane_primary_helper_funcs);
+	ret = drm_universal_plane_init(mxsfb->drm, &mxsfb->planes.primary, 1,
+				       &mxsfb_plane_funcs,
+				       mxsfb_primary_plane_formats,
+				       ARRAY_SIZE(mxsfb_primary_plane_formats),
 				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret)
 		return ret;
 
+	if (mxsfb->devdata->has_overlay) {
+		drm_plane_helper_add(&mxsfb->planes.overlay,
+				     &mxsfb_plane_overlay_helper_funcs);
+		ret = drm_universal_plane_init(mxsfb->drm,
+					       &mxsfb->planes.overlay, 1,
+					       &mxsfb_plane_funcs,
+					       mxsfb_overlay_plane_formats,
+					       ARRAY_SIZE(mxsfb_overlay_plane_formats),
+					       NULL, DRM_PLANE_TYPE_OVERLAY,
+					       NULL);
+		if (ret)
+			return ret;
+	}
+
 	drm_crtc_helper_add(crtc, &mxsfb_crtc_helper_funcs);
-	ret = drm_crtc_init_with_planes(mxsfb->drm, crtc, plane, NULL,
+	ret = drm_crtc_init_with_planes(mxsfb->drm, crtc,
+					&mxsfb->planes.primary, NULL,
 					&mxsfb_crtc_funcs, NULL);
 	if (ret)
 		return ret;
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_regs.h b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
index 8ebb52bb1b46..55d28a27f912 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_regs.h
+++ b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
@@ -27,6 +27,11 @@ 
 #define LCDC_VDCTRL4			0xb0
 #define LCDC_V4_DEBUG0			0x1d0
 #define LCDC_V3_DEBUG0			0x1f0
+#define LCDC_AS_CTRL			0x210
+#define LCDC_AS_BUF			0x220
+#define LCDC_AS_NEXT_BUF		0x230
+#define LCDC_AS_CLRKEYLOW		0x240
+#define LCDC_AS_CLRKEYHIGH		0x250
 
 #define CTRL_SFTRST			BIT(31)
 #define CTRL_CLKGATE			BIT(30)
@@ -90,6 +95,23 @@ 
 #define DEBUG0_HSYNC			BIT(26)
 #define DEBUG0_VSYNC			BIT(25)
 
+#define AS_CTRL_PS_DISABLE		BIT(23)
+#define AS_CTRL_ALPHA_INVERT		BIT(20)
+#define AS_CTRL_ALPHA(a)		(((a) & 0xff) << 8)
+#define AS_CTRL_FORMAT_RGB565		(0xe << 4)
+#define AS_CTRL_FORMAT_RGB444		(0xd << 4)
+#define AS_CTRL_FORMAT_RGB555		(0xc << 4)
+#define AS_CTRL_FORMAT_ARGB4444		(0x9 << 4)
+#define AS_CTRL_FORMAT_ARGB1555		(0x8 << 4)
+#define AS_CTRL_FORMAT_RGB888		(0x4 << 4)
+#define AS_CTRL_FORMAT_ARGB8888		(0x0 << 4)
+#define AS_CTRL_ENABLE_COLORKEY		BIT(3)
+#define AS_CTRL_ALPHA_CTRL_ROP		(3 << 1)
+#define AS_CTRL_ALPHA_CTRL_MULTIPLY	(2 << 1)
+#define AS_CTRL_ALPHA_CTRL_OVERRIDE	(1 << 1)
+#define AS_CTRL_ALPHA_CTRL_EMBEDDED	(0 << 1)
+#define AS_CTRL_AS_ENABLE		BIT(0)
+
 #define MXSFB_MIN_XRES			120
 #define MXSFB_MIN_YRES			120
 #define MXSFB_MAX_XRES			0xffff