| Message ID | 20200617074930.v3.1.Iea2704ec2cb40c00eca47781c310a6330ac5dd41@changeid (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs | expand |
On 17/06/2020 15:51, Douglas Anderson wrote: > From: Ravi Kumar Bokka <rbokka@codeaurora.org> > > This switches the bindings over from txt to yaml. > > Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > Changes in v3: > - Split conversion to yaml into separate patch new in v3. > - Use 'const' for compatible instead of a 1-entry enum. > - Changed filename to match compatible string. > - Add #address-cells and #size-cells to list of properties. > - Fixed up example. > > .../bindings/nvmem/qcom,qfprom.yaml | 45 +++++++++++++++++++ > .../devicetree/bindings/nvmem/qfprom.txt | 35 --------------- > 2 files changed, 45 insertions(+), 35 deletions(-) > create mode 100644 Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml > delete mode 100644 Documentation/devicetree/bindings/nvmem/qfprom.txt > > diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml > new file mode 100644 > index 000000000000..5efa5e7c4d81 > --- /dev/null > +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml > @@ -0,0 +1,45 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies Inc, QFPROM Efuse bindings > + > +maintainers: > + - Ravi Kumar Bokka <rbokka@codeaurora.org> > + Am not sure this was intentional, but the old maintainer name is totally lost in this patch! Please fix this! > +allOf: > + - $ref: "nvmem.yaml#" > + > +properties: > + compatible: > + const: qcom,qfprom > + > + reg: > + items: > + - description: The corrected region. > + > + # Needed if any child nodes are present. > + "#address-cells": > + const: 1 > + "#size-cells": > + const: 1 > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + efuse@784000 { > + compatible = "qcom,qfprom"; > + reg = <0 0x00784000 0 0x8ff>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + hstx-trim-primary@1eb { > + reg = <0x1eb 0x1>; > + bits = <1 4>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt > deleted file mode 100644 > index 26fe878d5c86..000000000000 > --- a/Documentation/devicetree/bindings/nvmem/qfprom.txt > +++ /dev/null > @@ -1,35 +0,0 @@ > -= Qualcomm QFPROM device tree bindings = > - > -This binding is intended to represent QFPROM which is found in most QCOM SOCs. > - > -Required properties: > -- compatible: should be "qcom,qfprom" > -- reg: Should contain registers location and length > - > -= Data cells = > -Are child nodes of qfprom, bindings of which as described in > -bindings/nvmem/nvmem.txt > - > -Example: > - > - qfprom: qfprom@700000 { > - compatible = "qcom,qfprom"; > - reg = <0x00700000 0x8000>; > - ... > - /* Data cells */ > - tsens_calibration: calib@404 { > - reg = <0x4404 0x10>; > - }; > - }; > - > - > -= Data consumers = > -Are device nodes which consume nvmem data cells. > - > -For example: > - > - tsens { > - ... > - nvmem-cells = <&tsens_calibration>; > - nvmem-cell-names = "calibration"; > - }; >
On 6/17/2020 8:48 PM, Srinivas Kandagatla wrote: > > > On 17/06/2020 15:51, Douglas Anderson wrote: >> From: Ravi Kumar Bokka <rbokka@codeaurora.org> >> >> This switches the bindings over from txt to yaml. >> >> Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> >> Signed-off-by: Douglas Anderson <dianders@chromium.org> >> --- >> >> Changes in v3: >> - Split conversion to yaml into separate patch new in v3. >> - Use 'const' for compatible instead of a 1-entry enum. >> - Changed filename to match compatible string. >> - Add #address-cells and #size-cells to list of properties. >> - Fixed up example. >> >> .../bindings/nvmem/qcom,qfprom.yaml | 45 +++++++++++++++++++ >> .../devicetree/bindings/nvmem/qfprom.txt | 35 --------------- >> 2 files changed, 45 insertions(+), 35 deletions(-) >> create mode 100644 >> Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml >> delete mode 100644 Documentation/devicetree/bindings/nvmem/qfprom.txt >> >> diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml >> b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml >> new file mode 100644 >> index 000000000000..5efa5e7c4d81 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml >> @@ -0,0 +1,45 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Technologies Inc, QFPROM Efuse bindings >> + >> +maintainers: >> + - Ravi Kumar Bokka <rbokka@codeaurora.org> >> + > > Am not sure this was intentional, but the old maintainer name is totally > lost in this patch! > > Please fix this! > Hi Srinivas, The existed qfprom dt-bindings in .txt format. I will make it as it is to merge whole content in .yaml format once confirm all the parameters with this new driver changes. > > >> +allOf: >> + - $ref: "nvmem.yaml#" >> + >> +properties: >> + compatible: >> + const: qcom,qfprom >> + >> + reg: >> + items: >> + - description: The corrected region. >> + >> + # Needed if any child nodes are present. >> + "#address-cells": >> + const: 1 >> + "#size-cells": >> + const: 1 >> + >> +required: >> + - compatible >> + - reg >> + >> +examples: >> + - | >> + efuse@784000 { >> + compatible = "qcom,qfprom"; >> + reg = <0 0x00784000 0 0x8ff>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + hstx-trim-primary@1eb { >> + reg = <0x1eb 0x1>; >> + bits = <1 4>; >> + }; >> + }; >> diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt >> b/Documentation/devicetree/bindings/nvmem/qfprom.txt >> deleted file mode 100644 >> index 26fe878d5c86..000000000000 >> --- a/Documentation/devicetree/bindings/nvmem/qfprom.txt >> +++ /dev/null >> @@ -1,35 +0,0 @@ >> -= Qualcomm QFPROM device tree bindings = >> - >> -This binding is intended to represent QFPROM which is found in most >> QCOM SOCs. >> - >> -Required properties: >> -- compatible: should be "qcom,qfprom" >> -- reg: Should contain registers location and length >> - >> -= Data cells = >> -Are child nodes of qfprom, bindings of which as described in >> -bindings/nvmem/nvmem.txt >> - >> -Example: >> - >> - qfprom: qfprom@700000 { >> - compatible = "qcom,qfprom"; >> - reg = <0x00700000 0x8000>; >> - ... >> - /* Data cells */ >> - tsens_calibration: calib@404 { >> - reg = <0x4404 0x10>; >> - }; >> - }; >> - >> - >> -= Data consumers = >> -Are device nodes which consume nvmem data cells. >> - >> -For example: >> - >> - tsens { >> - ... >> - nvmem-cells = <&tsens_calibration>; >> - nvmem-cell-names = "calibration"; >> - }; >>
Hi, On Wed, Jun 17, 2020 at 9:26 AM Ravi Kumar Bokka (Temp) <rbokka@codeaurora.org> wrote: > > > > On 6/17/2020 8:48 PM, Srinivas Kandagatla wrote: > > > > > > On 17/06/2020 15:51, Douglas Anderson wrote: > >> From: Ravi Kumar Bokka <rbokka@codeaurora.org> > >> > >> This switches the bindings over from txt to yaml. > >> > >> Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> > >> Signed-off-by: Douglas Anderson <dianders@chromium.org> > >> --- > >> > >> Changes in v3: > >> - Split conversion to yaml into separate patch new in v3. > >> - Use 'const' for compatible instead of a 1-entry enum. > >> - Changed filename to match compatible string. > >> - Add #address-cells and #size-cells to list of properties. > >> - Fixed up example. > >> > >> .../bindings/nvmem/qcom,qfprom.yaml | 45 +++++++++++++++++++ > >> .../devicetree/bindings/nvmem/qfprom.txt | 35 --------------- > >> 2 files changed, 45 insertions(+), 35 deletions(-) > >> create mode 100644 > >> Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml > >> delete mode 100644 Documentation/devicetree/bindings/nvmem/qfprom.txt > >> > >> diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml > >> b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml > >> new file mode 100644 > >> index 000000000000..5efa5e7c4d81 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml > >> @@ -0,0 +1,45 @@ > >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > >> +%YAML 1.2 > >> +--- > >> +$id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: Qualcomm Technologies Inc, QFPROM Efuse bindings > >> + > >> +maintainers: > >> + - Ravi Kumar Bokka <rbokka@codeaurora.org> > >> + > > > > Am not sure this was intentional, but the old maintainer name is totally > > lost in this patch! > > > > Please fix this! > > > > Hi Srinivas, > The existed qfprom dt-bindings in .txt format. > I will make it as it is to merge whole content in .yaml format once > confirm all the parameters with this new driver changes. Ah, right. It makes more sense to set you as the maintainer since you were listed as the maintainer for the Linux driver and also the author of the old bindings. I'll change it to you then. Unless I hear otherwise, I'll plan to send out a v4 tomorrow with feedback I've gotten today. -Doug
On Wed, 17 Jun 2020 07:51:13 -0700, Douglas Anderson wrote: > From: Ravi Kumar Bokka <rbokka@codeaurora.org> > > This switches the bindings over from txt to yaml. > > Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > Changes in v3: > - Split conversion to yaml into separate patch new in v3. > - Use 'const' for compatible instead of a 1-entry enum. > - Changed filename to match compatible string. > - Add #address-cells and #size-cells to list of properties. > - Fixed up example. > > .../bindings/nvmem/qcom,qfprom.yaml | 45 +++++++++++++++++++ > .../devicetree/bindings/nvmem/qfprom.txt | 35 --------------- > 2 files changed, 45 insertions(+), 35 deletions(-) > create mode 100644 Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml > delete mode 100644 Documentation/devicetree/bindings/nvmem/qfprom.txt > My bot found errors running 'make dt_binding_check' on your patch: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/nvmem/qcom,qfprom.example.dt.yaml: example-0: efuse@784000:reg:0: [0, 7880704, 0, 2303] is too long See https://patchwork.ozlabs.org/patch/1311254 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml new file mode 100644 index 000000000000..5efa5e7c4d81 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies Inc, QFPROM Efuse bindings + +maintainers: + - Ravi Kumar Bokka <rbokka@codeaurora.org> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + const: qcom,qfprom + + reg: + items: + - description: The corrected region. + + # Needed if any child nodes are present. + "#address-cells": + const: 1 + "#size-cells": + const: 1 + +required: + - compatible + - reg + +examples: + - | + efuse@784000 { + compatible = "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + hstx-trim-primary@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt deleted file mode 100644 index 26fe878d5c86..000000000000 --- a/Documentation/devicetree/bindings/nvmem/qfprom.txt +++ /dev/null @@ -1,35 +0,0 @@ -= Qualcomm QFPROM device tree bindings = - -This binding is intended to represent QFPROM which is found in most QCOM SOCs. - -Required properties: -- compatible: should be "qcom,qfprom" -- reg: Should contain registers location and length - -= Data cells = -Are child nodes of qfprom, bindings of which as described in -bindings/nvmem/nvmem.txt - -Example: - - qfprom: qfprom@700000 { - compatible = "qcom,qfprom"; - reg = <0x00700000 0x8000>; - ... - /* Data cells */ - tsens_calibration: calib@404 { - reg = <0x4404 0x10>; - }; - }; - - -= Data consumers = -Are device nodes which consume nvmem data cells. - -For example: - - tsens { - ... - nvmem-cells = <&tsens_calibration>; - nvmem-cell-names = "calibration"; - };