| Message ID | 20200623165226.12197-1-andrey.konovalov@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: i2c: imx290: replace msleep(10) with usleep_range(10000, 11000) | expand |
This patch should be applied on top of "[PATCH v5 00/10] Improvements to IMX290 CMOS driver" series. Thanks, Andrey On 23.06.2020 19:52, Andrey Konovalov wrote: > This fixes checkpatch warnings of "msleep < 20ms can sleep for up to 20ms". > > Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> > --- > drivers/media/i2c/imx290.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c > index 9c97830164e9..adcddf3204f7 100644 > --- a/drivers/media/i2c/imx290.c > +++ b/drivers/media/i2c/imx290.c > @@ -406,7 +406,7 @@ static int imx290_set_register_array(struct imx290 *imx290, > } > > /* Provide 10ms settle time */ > - msleep(10); > + usleep_range(10000, 11000); > > return 0; > } > @@ -484,14 +484,14 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl) > if (ctrl->val) { > imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x00); > imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00); > - msleep(10); > + usleep_range(10000, 11000); > imx290_write_reg(imx290, IMX290_PGCTRL, > (u8)(IMX290_PGCTRL_REGEN | > IMX290_PGCTRL_THRU | > IMX290_PGCTRL_MODE(ctrl->val))); > } else { > imx290_write_reg(imx290, IMX290_PGCTRL, 0x00); > - msleep(10); > + usleep_range(10000, 11000); > if (imx290->bpp == 10) > imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, > 0x3c); >
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c index 9c97830164e9..adcddf3204f7 100644 --- a/drivers/media/i2c/imx290.c +++ b/drivers/media/i2c/imx290.c @@ -406,7 +406,7 @@ static int imx290_set_register_array(struct imx290 *imx290, } /* Provide 10ms settle time */ - msleep(10); + usleep_range(10000, 11000); return 0; } @@ -484,14 +484,14 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl) if (ctrl->val) { imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x00); imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00); - msleep(10); + usleep_range(10000, 11000); imx290_write_reg(imx290, IMX290_PGCTRL, (u8)(IMX290_PGCTRL_REGEN | IMX290_PGCTRL_THRU | IMX290_PGCTRL_MODE(ctrl->val))); } else { imx290_write_reg(imx290, IMX290_PGCTRL, 0x00); - msleep(10); + usleep_range(10000, 11000); if (imx290->bpp == 10) imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x3c);
This fixes checkpatch warnings of "msleep < 20ms can sleep for up to 20ms". Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> --- drivers/media/i2c/imx290.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)