diff mbox series

[1/2] thermal: qcom: tsens-v0_1: Add support for MSM8939

Message ID 20200501203311.143934-2-konradybcio@gmail.com (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series Add msm8939 tsensv0_1 support | expand

Commit Message

Konrad Dybcio May 1, 2020, 8:33 p.m. UTC
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 drivers/thermal/qcom/tsens-v0_1.c | 142 +++++++++++++++++++++++++++++-
 drivers/thermal/qcom/tsens.c      |   3 +
 drivers/thermal/qcom/tsens.h      |   2 +-
 3 files changed, 145 insertions(+), 2 deletions(-)

Comments

Amit Kucheria May 4, 2020, 6:31 a.m. UTC | #1
On Sat, May 2, 2020 at 2:03 AM Konrad Dybcio <konradybcio@gmail.com> wrote:
>
> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
> ---
>  drivers/thermal/qcom/tsens-v0_1.c | 142 +++++++++++++++++++++++++++++-
>  drivers/thermal/qcom/tsens.c      |   3 +
>  drivers/thermal/qcom/tsens.h      |   2 +-
>  3 files changed, 145 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> index 959a9371d205c..29b95886273b7 100644
> --- a/drivers/thermal/qcom/tsens-v0_1.c
> +++ b/drivers/thermal/qcom/tsens-v0_1.c
> @@ -48,6 +48,64 @@
>  #define MSM8916_CAL_SEL_MASK   0xe0000000
>  #define MSM8916_CAL_SEL_SHIFT  29
>
> +/* eeprom layout data for 8939 */
> +#define MSM8939_BASE0_MASK           0x000000ff
> +#define MSM8939_BASE1_MASK           0xff000000
> +#define MSM8939_BASE0_SHIFT

Use 0?

> +#define MSM8939_BASE1_SHIFT          24
> +
> +#define MSM8939_S0_P1_MASK         0x000001f8
> +#define MSM8939_S1_P1_MASK         0x001f8000
> +#define MSM8939_S2_P1_MASK_0_4     0xf8000000
> +#define MSM8939_S2_P1_MASK_5       0x00000001
> +#define MSM8939_S3_P1_MASK         0x00001f80
> +#define MSM8939_S4_P1_MASK         0x01f80000
> +#define MSM8939_S5_P1_MASK         0x00003f00
> +#define MSM8939_S6_P1_MASK         0x03f00000
> +#define MSM8939_S7_P1_MASK         0x0000003f
> +#define MSM8939_S8_P1_MASK         0x0003f000
> +#define MSM8939_S9_P1_MASK         0x07e00000
> +
> +#define MSM8939_S0_P2_MASK         0x00007e00
> +#define MSM8939_S1_P2_MASK         0x07e00000
> +#define MSM8939_S2_P2_MASK         0x0000007e
> +#define MSM8939_S3_P2_MASK         0x0007e000
> +#define MSM8939_S4_P2_MASK         0x7e000000
> +#define MSM8939_S5_P2_MASK         0x000fc000
> +#define MSM8939_S6_P2_MASK         0xfc000000
> +#define MSM8939_S7_P2_MASK         0x00000fc0
> +#define MSM8939_S8_P2_MASK         0x00fc0000
> +#define MSM8939_S9_P2_MASK_0_4     0xf8000000
> +#define MSM8939_S9_P2_MASK_5       0x00002000
> +
> +#define MSM8939_CAL_SEL_MASK   0xc0000000
> +#define MSM8939_CAL_SEL_SHIFT  0
> +
> +

Get rid of extra line.

> +#define MSM8939_S0_P1_SHIFT        3
> +#define MSM8939_S1_P1_SHIFT        15
> +#define MSM8939_S2_P1_SHIFT_0_4    27
> +#define MSM8939_S2_P1_SHIFT_5      5
> +#define MSM8939_S3_P1_SHIFT        7
> +#define MSM8939_S4_P1_SHIFT        19
> +#define MSM8939_S5_P1_SHIFT        8
> +#define MSM8939_S6_P1_SHIFT        20
> +//yes, 7 is missing in downstream

Use C style comments.

> +#define MSM8939_S8_P1_SHIFT        12
> +#define MSM8939_S9_P1_SHIFT        21
> +
> +#define MSM8939_S0_P2_SHIFT        9
> +#define MSM8939_S1_P2_SHIFT        21
> +#define MSM8939_S2_P2_SHIFT        1
> +#define MSM8939_S3_P2_SHIFT        13
> +#define MSM8939_S4_P2_SHIFT        25
> +#define MSM8939_S5_P2_SHIFT        14
> +#define MSM8939_S6_P2_SHIFT        26
> +#define MSM8939_S7_P2_SHIFT        6
> +#define MSM8939_S8_P2_SHIFT        18
> +#define MSM8939_S9_P2_SHIFT_0_4    27
> +#define MSM8939_S9_P2_SHIFT_5      8
> +
>  /* eeprom layout data for 8974 */
>  #define BASE1_MASK             0xff
>  #define S0_P1_MASK             0x3f00
> @@ -189,6 +247,73 @@ static int calibrate_8916(struct tsens_priv *priv)
>         return 0;
>  }
>
> +static int calibrate_8939(struct tsens_priv *priv)
> +{
> +       int base0 = 0, base1 = 0, i;
> +       u32 p1[11], p2[11];
> +       int mode = 0;
> +       u32 *qfprom_cdata, *qfprom_csel;
> +
> +       qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
> +       if (IS_ERR(qfprom_cdata))
> +               return PTR_ERR(qfprom_cdata);
> +
> +       qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
> +       if (IS_ERR(qfprom_csel)) {
> +               kfree(qfprom_cdata);
> +               return PTR_ERR(qfprom_csel);
> +       }
> +
> +       mode = (qfprom_csel[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
> +       dev_dbg(priv->dev, "calibration mode is %d\n", mode);

Add an extra line here.

> +       switch (mode) {
> +       case TWO_PT_CALIB:
> +               base1 = (qfprom_cdata[1] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
> +               p2[0] = (qfprom_cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
> +               p2[1] = (qfprom_cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
> +               p2[2] = (qfprom_cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
> +               p2[3] = (qfprom_cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
> +               p2[4] = (qfprom_cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
> +               p2[5] = (qfprom_cdata[1] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
> +               p2[6] = (qfprom_cdata[1] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
> +               p2[7] = (qfprom_cdata[1] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
> +               p2[8] = (qfprom_cdata[1] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
> +               p2[9] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
> +               p2[10] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5;
> +               for (i = 0; i < priv->num_sensors; i++)
> +                       p2[i] = ((base1 + p2[i]) << 3);
> +               /* Fall through */
> +       case ONE_PT_CALIB2:
> +               base0 = (qfprom_cdata[0] & MSM8939_BASE0_MASK);
> +               p1[0] = (qfprom_cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
> +               p1[1] = (qfprom_cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
> +               p1[2] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
> +               p1[3] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5;
> +               p1[4] = (qfprom_cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
> +               p1[5] = (qfprom_cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
> +               p1[6] = (qfprom_cdata[1] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
> +               p1[7] = (qfprom_cdata[1] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
> +               //yes, 7 is missing in downstream

Use C comment style. Might this be a bug?

> +               p1[8] = (qfprom_cdata[1] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
> +               p1[9] = (qfprom_cdata[1] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
> +               for (i = 0; i < priv->num_sensors; i++)
> +                       p1[i] = (((base0) + p1[i]) << 3);
> +               break;
> +       default:
> +               for (i = 0; i < priv->num_sensors; i++) {
> +                       p1[i] = 500;
> +                       p2[i] = 780;
> +               }
> +               break;
> +       }
> +
> +       compute_intercept_slope(priv, p1, p2, mode);
> +       kfree(qfprom_cdata);
> +       kfree(qfprom_csel);
> +
> +       return 0;
> +}
> +
>  static int calibrate_8974(struct tsens_priv *priv)
>  {
>         int base1 = 0, base2 = 0, i;
> @@ -325,7 +450,7 @@ static int calibrate_8974(struct tsens_priv *priv)
>         return 0;
>  }
>
> -/* v0.1: 8916, 8974 */
> +/* v0.1: 8916, 8939, 8974 */
>
>  static struct tsens_features tsens_v0_1_feat = {
>         .ver_major      = VER_0_1,
> @@ -386,6 +511,21 @@ struct tsens_plat_data data_8916 = {
>         .fields = tsens_v0_1_regfields,
>  };
>
> +static const struct tsens_ops ops_8939 = {
> +       .init           = init_common,
> +       .calibrate      = calibrate_8939,
> +       .get_temp       = get_temp_common,
> +};
> +
> +struct tsens_plat_data data_8939 = {
> +       .num_sensors    = 10,

I think 8939 has 11 sensors. Can you confirm?

> +       .ops            = &ops_8939,
> +       .hw_ids         = (unsigned int []){0, 1, 2, 4, 5, 6, 7, 8, 9 },

And this should be equal to the number of sensors


> +
> +       .feat           = &tsens_v0_1_feat,
> +       .fields = tsens_v0_1_regfields,
> +};
> +
>  static const struct tsens_ops ops_8974 = {
>         .init           = init_common,
>         .calibrate      = calibrate_8974,
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 2f77d235cf735..f654057e96ae1 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -59,6 +59,9 @@ static const struct of_device_id tsens_table[] = {
>         {
>                 .compatible = "qcom,msm8916-tsens",
>                 .data = &data_8916,
> +       }, {
> +               .compatible = "qcom,msm8939-tsens",
> +               .data = &data_8939,
>         }, {
>                 .compatible = "qcom,msm8974-tsens",
>                 .data = &data_8974,
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 502acf0e68285..403b15546f648 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -590,7 +590,7 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data);
>  extern struct tsens_plat_data data_8960;
>
>  /* TSENS v0.1 targets */
> -extern struct tsens_plat_data data_8916, data_8974;
> +extern struct tsens_plat_data data_8916, data_8939, data_8974;
>
>  /* TSENS v1 targets */
>  extern struct tsens_plat_data data_tsens_v1, data_8976;
> --
> 2.26.1
>
Konrad Dybcio May 4, 2020, 8:04 a.m. UTC | #2
Thanks for your review. I'll hopefully send a v2 later today.

As for the sensor count, I don't know how many there actually are. I'm
an independent dev and don't have access to any documentation and I'm
solely basing on what I find in downstream, and I think it's 10,
unless mainline expects the _0_4 and _5 to be counted separately.. [1]

I will also make sure to test it again before sending and will give
you the results in the v2 cover letter.

[1] https://github.com/konradybcio/android_kernel_asus_msm8916-1/blob/minimal/drivers/thermal/msm8974-tsens.c#L396


pon., 4 maj 2020 o 08:31 Amit Kucheria <amit.kucheria@linaro.org> napisaƂ(a):
>
> On Sat, May 2, 2020 at 2:03 AM Konrad Dybcio <konradybcio@gmail.com> wrote:
> >
> > Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
> > ---
> >  drivers/thermal/qcom/tsens-v0_1.c | 142 +++++++++++++++++++++++++++++-
> >  drivers/thermal/qcom/tsens.c      |   3 +
> >  drivers/thermal/qcom/tsens.h      |   2 +-
> >  3 files changed, 145 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> > index 959a9371d205c..29b95886273b7 100644
> > --- a/drivers/thermal/qcom/tsens-v0_1.c
> > +++ b/drivers/thermal/qcom/tsens-v0_1.c
> > @@ -48,6 +48,64 @@
> >  #define MSM8916_CAL_SEL_MASK   0xe0000000
> >  #define MSM8916_CAL_SEL_SHIFT  29
> >
> > +/* eeprom layout data for 8939 */
> > +#define MSM8939_BASE0_MASK           0x000000ff
> > +#define MSM8939_BASE1_MASK           0xff000000
> > +#define MSM8939_BASE0_SHIFT
>
> Use 0?
>
> > +#define MSM8939_BASE1_SHIFT          24
> > +
> > +#define MSM8939_S0_P1_MASK         0x000001f8
> > +#define MSM8939_S1_P1_MASK         0x001f8000
> > +#define MSM8939_S2_P1_MASK_0_4     0xf8000000
> > +#define MSM8939_S2_P1_MASK_5       0x00000001
> > +#define MSM8939_S3_P1_MASK         0x00001f80
> > +#define MSM8939_S4_P1_MASK         0x01f80000
> > +#define MSM8939_S5_P1_MASK         0x00003f00
> > +#define MSM8939_S6_P1_MASK         0x03f00000
> > +#define MSM8939_S7_P1_MASK         0x0000003f
> > +#define MSM8939_S8_P1_MASK         0x0003f000
> > +#define MSM8939_S9_P1_MASK         0x07e00000
> > +
> > +#define MSM8939_S0_P2_MASK         0x00007e00
> > +#define MSM8939_S1_P2_MASK         0x07e00000
> > +#define MSM8939_S2_P2_MASK         0x0000007e
> > +#define MSM8939_S3_P2_MASK         0x0007e000
> > +#define MSM8939_S4_P2_MASK         0x7e000000
> > +#define MSM8939_S5_P2_MASK         0x000fc000
> > +#define MSM8939_S6_P2_MASK         0xfc000000
> > +#define MSM8939_S7_P2_MASK         0x00000fc0
> > +#define MSM8939_S8_P2_MASK         0x00fc0000
> > +#define MSM8939_S9_P2_MASK_0_4     0xf8000000
> > +#define MSM8939_S9_P2_MASK_5       0x00002000
> > +
> > +#define MSM8939_CAL_SEL_MASK   0xc0000000
> > +#define MSM8939_CAL_SEL_SHIFT  0
> > +
> > +
>
> Get rid of extra line.
>
> > +#define MSM8939_S0_P1_SHIFT        3
> > +#define MSM8939_S1_P1_SHIFT        15
> > +#define MSM8939_S2_P1_SHIFT_0_4    27
> > +#define MSM8939_S2_P1_SHIFT_5      5
> > +#define MSM8939_S3_P1_SHIFT        7
> > +#define MSM8939_S4_P1_SHIFT        19
> > +#define MSM8939_S5_P1_SHIFT        8
> > +#define MSM8939_S6_P1_SHIFT        20
> > +//yes, 7 is missing in downstream
>
> Use C style comments.
>
> > +#define MSM8939_S8_P1_SHIFT        12
> > +#define MSM8939_S9_P1_SHIFT        21
> > +
> > +#define MSM8939_S0_P2_SHIFT        9
> > +#define MSM8939_S1_P2_SHIFT        21
> > +#define MSM8939_S2_P2_SHIFT        1
> > +#define MSM8939_S3_P2_SHIFT        13
> > +#define MSM8939_S4_P2_SHIFT        25
> > +#define MSM8939_S5_P2_SHIFT        14
> > +#define MSM8939_S6_P2_SHIFT        26
> > +#define MSM8939_S7_P2_SHIFT        6
> > +#define MSM8939_S8_P2_SHIFT        18
> > +#define MSM8939_S9_P2_SHIFT_0_4    27
> > +#define MSM8939_S9_P2_SHIFT_5      8
> > +
> >  /* eeprom layout data for 8974 */
> >  #define BASE1_MASK             0xff
> >  #define S0_P1_MASK             0x3f00
> > @@ -189,6 +247,73 @@ static int calibrate_8916(struct tsens_priv *priv)
> >         return 0;
> >  }
> >
> > +static int calibrate_8939(struct tsens_priv *priv)
> > +{
> > +       int base0 = 0, base1 = 0, i;
> > +       u32 p1[11], p2[11];
> > +       int mode = 0;
> > +       u32 *qfprom_cdata, *qfprom_csel;
> > +
> > +       qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
> > +       if (IS_ERR(qfprom_cdata))
> > +               return PTR_ERR(qfprom_cdata);
> > +
> > +       qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
> > +       if (IS_ERR(qfprom_csel)) {
> > +               kfree(qfprom_cdata);
> > +               return PTR_ERR(qfprom_csel);
> > +       }
> > +
> > +       mode = (qfprom_csel[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
> > +       dev_dbg(priv->dev, "calibration mode is %d\n", mode);
>
> Add an extra line here.
>
> > +       switch (mode) {
> > +       case TWO_PT_CALIB:
> > +               base1 = (qfprom_cdata[1] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
> > +               p2[0] = (qfprom_cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
> > +               p2[1] = (qfprom_cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
> > +               p2[2] = (qfprom_cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
> > +               p2[3] = (qfprom_cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
> > +               p2[4] = (qfprom_cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
> > +               p2[5] = (qfprom_cdata[1] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
> > +               p2[6] = (qfprom_cdata[1] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
> > +               p2[7] = (qfprom_cdata[1] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
> > +               p2[8] = (qfprom_cdata[1] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
> > +               p2[9] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
> > +               p2[10] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5;
> > +               for (i = 0; i < priv->num_sensors; i++)
> > +                       p2[i] = ((base1 + p2[i]) << 3);
> > +               /* Fall through */
> > +       case ONE_PT_CALIB2:
> > +               base0 = (qfprom_cdata[0] & MSM8939_BASE0_MASK);
> > +               p1[0] = (qfprom_cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
> > +               p1[1] = (qfprom_cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
> > +               p1[2] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
> > +               p1[3] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5;
> > +               p1[4] = (qfprom_cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
> > +               p1[5] = (qfprom_cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
> > +               p1[6] = (qfprom_cdata[1] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
> > +               p1[7] = (qfprom_cdata[1] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
> > +               //yes, 7 is missing in downstream
>
> Use C comment style. Might this be a bug?
>
> > +               p1[8] = (qfprom_cdata[1] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
> > +               p1[9] = (qfprom_cdata[1] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
> > +               for (i = 0; i < priv->num_sensors; i++)
> > +                       p1[i] = (((base0) + p1[i]) << 3);
> > +               break;
> > +       default:
> > +               for (i = 0; i < priv->num_sensors; i++) {
> > +                       p1[i] = 500;
> > +                       p2[i] = 780;
> > +               }
> > +               break;
> > +       }
> > +
> > +       compute_intercept_slope(priv, p1, p2, mode);
> > +       kfree(qfprom_cdata);
> > +       kfree(qfprom_csel);
> > +
> > +       return 0;
> > +}
> > +
> >  static int calibrate_8974(struct tsens_priv *priv)
> >  {
> >         int base1 = 0, base2 = 0, i;
> > @@ -325,7 +450,7 @@ static int calibrate_8974(struct tsens_priv *priv)
> >         return 0;
> >  }
> >
> > -/* v0.1: 8916, 8974 */
> > +/* v0.1: 8916, 8939, 8974 */
> >
> >  static struct tsens_features tsens_v0_1_feat = {
> >         .ver_major      = VER_0_1,
> > @@ -386,6 +511,21 @@ struct tsens_plat_data data_8916 = {
> >         .fields = tsens_v0_1_regfields,
> >  };
> >
> > +static const struct tsens_ops ops_8939 = {
> > +       .init           = init_common,
> > +       .calibrate      = calibrate_8939,
> > +       .get_temp       = get_temp_common,
> > +};
> > +
> > +struct tsens_plat_data data_8939 = {
> > +       .num_sensors    = 10,
>
> I think 8939 has 11 sensors. Can you confirm?
>
> > +       .ops            = &ops_8939,
> > +       .hw_ids         = (unsigned int []){0, 1, 2, 4, 5, 6, 7, 8, 9 },
>
> And this should be equal to the number of sensors
>
>
> > +
> > +       .feat           = &tsens_v0_1_feat,
> > +       .fields = tsens_v0_1_regfields,
> > +};
> > +
> >  static const struct tsens_ops ops_8974 = {
> >         .init           = init_common,
> >         .calibrate      = calibrate_8974,
> > diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> > index 2f77d235cf735..f654057e96ae1 100644
> > --- a/drivers/thermal/qcom/tsens.c
> > +++ b/drivers/thermal/qcom/tsens.c
> > @@ -59,6 +59,9 @@ static const struct of_device_id tsens_table[] = {
> >         {
> >                 .compatible = "qcom,msm8916-tsens",
> >                 .data = &data_8916,
> > +       }, {
> > +               .compatible = "qcom,msm8939-tsens",
> > +               .data = &data_8939,
> >         }, {
> >                 .compatible = "qcom,msm8974-tsens",
> >                 .data = &data_8974,
> > diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> > index 502acf0e68285..403b15546f648 100644
> > --- a/drivers/thermal/qcom/tsens.h
> > +++ b/drivers/thermal/qcom/tsens.h
> > @@ -590,7 +590,7 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data);
> >  extern struct tsens_plat_data data_8960;
> >
> >  /* TSENS v0.1 targets */
> > -extern struct tsens_plat_data data_8916, data_8974;
> > +extern struct tsens_plat_data data_8916, data_8939, data_8974;
> >
> >  /* TSENS v1 targets */
> >  extern struct tsens_plat_data data_tsens_v1, data_8976;
> > --
> > 2.26.1
> >
Shawn Guo June 28, 2020, 7:39 a.m. UTC | #3
On Fri, May 01, 2020 at 10:33:10PM +0200, Konrad Dybcio wrote:
> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>

For the record, I'm working my version of msm8939 tsens driver support,
and I would highlight the things that differ from this patch.

> ---
>  drivers/thermal/qcom/tsens-v0_1.c | 142 +++++++++++++++++++++++++++++-
>  drivers/thermal/qcom/tsens.c      |   3 +
>  drivers/thermal/qcom/tsens.h      |   2 +-
>  3 files changed, 145 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> index 959a9371d205c..29b95886273b7 100644
> --- a/drivers/thermal/qcom/tsens-v0_1.c
> +++ b/drivers/thermal/qcom/tsens-v0_1.c
> @@ -48,6 +48,64 @@
>  #define MSM8916_CAL_SEL_MASK	0xe0000000
>  #define MSM8916_CAL_SEL_SHIFT	29
>  
> +/* eeprom layout data for 8939 */
> +#define MSM8939_BASE0_MASK           0x000000ff

Tabs rather than spaces are used for indentation.

> +#define MSM8939_BASE1_MASK           0xff000000
> +#define MSM8939_BASE0_SHIFT

This shift is 0.

> +#define MSM8939_BASE1_SHIFT          24
> +
> +#define MSM8939_S0_P1_MASK         0x000001f8
> +#define MSM8939_S1_P1_MASK         0x001f8000
> +#define MSM8939_S2_P1_MASK_0_4     0xf8000000
> +#define MSM8939_S2_P1_MASK_5       0x00000001

This mask define is contradicting to MSM8939_S2_P1_SHIFT_5, and needs to
be confirmed.

> +#define MSM8939_S3_P1_MASK         0x00001f80
> +#define MSM8939_S4_P1_MASK         0x01f80000
> +#define MSM8939_S5_P1_MASK         0x00003f00
> +#define MSM8939_S6_P1_MASK         0x03f00000
> +#define MSM8939_S7_P1_MASK         0x0000003f
> +#define MSM8939_S8_P1_MASK         0x0003f000
> +#define MSM8939_S9_P1_MASK         0x07e00000
> +
> +#define MSM8939_S0_P2_MASK         0x00007e00
> +#define MSM8939_S1_P2_MASK         0x07e00000
> +#define MSM8939_S2_P2_MASK         0x0000007e
> +#define MSM8939_S3_P2_MASK         0x0007e000
> +#define MSM8939_S4_P2_MASK         0x7e000000
> +#define MSM8939_S5_P2_MASK         0x000fc000
> +#define MSM8939_S6_P2_MASK         0xfc000000
> +#define MSM8939_S7_P2_MASK         0x00000fc0
> +#define MSM8939_S8_P2_MASK         0x00fc0000
> +#define MSM8939_S9_P2_MASK_0_4     0xf8000000
> +#define MSM8939_S9_P2_MASK_5       0x00002000

It's contradicting to MSM8939_S9_P2_SHIFT_5, and needs to be confirmed.

> +
> +#define MSM8939_CAL_SEL_MASK	0xc0000000

Per downstream kernel, this mask is 0x7.

https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/thermal/msm8974-tsens.c?h=LA.BR.1.2.9.1_rb1.5#n370

> +#define MSM8939_CAL_SEL_SHIFT	0
> +
> +
> +#define MSM8939_S0_P1_SHIFT        3
> +#define MSM8939_S1_P1_SHIFT        15
> +#define MSM8939_S2_P1_SHIFT_0_4    27
> +#define MSM8939_S2_P1_SHIFT_5      5
> +#define MSM8939_S3_P1_SHIFT        7
> +#define MSM8939_S4_P1_SHIFT        19
> +#define MSM8939_S5_P1_SHIFT        8
> +#define MSM8939_S6_P1_SHIFT        20
> +//yes, 7 is missing in downstream

The shift is not missing but just 0.

> +#define MSM8939_S8_P1_SHIFT        12
> +#define MSM8939_S9_P1_SHIFT        21
> +
> +#define MSM8939_S0_P2_SHIFT        9
> +#define MSM8939_S1_P2_SHIFT        21
> +#define MSM8939_S2_P2_SHIFT        1
> +#define MSM8939_S3_P2_SHIFT        13
> +#define MSM8939_S4_P2_SHIFT        25
> +#define MSM8939_S5_P2_SHIFT        14
> +#define MSM8939_S6_P2_SHIFT        26
> +#define MSM8939_S7_P2_SHIFT        6
> +#define MSM8939_S8_P2_SHIFT        18
> +#define MSM8939_S9_P2_SHIFT_0_4    27
> +#define MSM8939_S9_P2_SHIFT_5      8
> +
>  /* eeprom layout data for 8974 */
>  #define BASE1_MASK		0xff
>  #define S0_P1_MASK		0x3f00
> @@ -189,6 +247,73 @@ static int calibrate_8916(struct tsens_priv *priv)
>  	return 0;
>  }
>  
> +static int calibrate_8939(struct tsens_priv *priv)
> +{
> +	int base0 = 0, base1 = 0, i;
> +	u32 p1[11], p2[11];

MSM8939 gets 10 sensors, so the arrays should be [10].

> +	int mode = 0;
> +	u32 *qfprom_cdata, *qfprom_csel;
> +
> +	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
> +	if (IS_ERR(qfprom_cdata))
> +		return PTR_ERR(qfprom_cdata);
> +
> +	qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
> +	if (IS_ERR(qfprom_csel)) {
> +		kfree(qfprom_cdata);
> +		return PTR_ERR(qfprom_csel);
> +	}

'calib_sel' is not separate from 'calib' bits on MSM8939.  I chose to
read nvmem out as one go and map them to calibration data as below, per
downstream kernel.

	/* Mapping between qfprom nvmem and calibration data */
	cdata[0] = qfprom_cdata[12];
	cdata[1] = qfprom_cdata[13];
	cdata[2] = qfprom_cdata[0];
	cdata[3] = qfprom_cdata[1];
	cdata[4] = qfprom_cdata[22];
	cdata[5] = qfprom_cdata[21];

	mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;

https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/thermal/msm8974-tsens.c?h=LA.BR.1.2.9.1_rb1.5#n1286

We should support MSM8939 v3, as that's the mass production revision.

> +
> +	mode = (qfprom_csel[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
> +	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
> +	switch (mode) {
> +	case TWO_PT_CALIB:
> +		base1 = (qfprom_cdata[1] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
> +		p2[0] = (qfprom_cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
> +		p2[1] = (qfprom_cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
> +		p2[2] = (qfprom_cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
> +		p2[3] = (qfprom_cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
> +		p2[4] = (qfprom_cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
> +		p2[5] = (qfprom_cdata[1] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
> +		p2[6] = (qfprom_cdata[1] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
> +		p2[7] = (qfprom_cdata[1] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
> +		p2[8] = (qfprom_cdata[1] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
> +		p2[9] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
> +		p2[10] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5;

These do not really match downstream kernel.  My version look like:

		base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
		p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
		p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
		p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
		p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
		p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
		p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
		p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
		p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
		p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
		p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
		p2[9] |= (cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5;

> +		for (i = 0; i < priv->num_sensors; i++)
> +			p2[i] = ((base1 + p2[i]) << 3);

The left shift should be 2 per downstream kernel.

https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/thermal/msm8974-tsens.c?h=LA.BR.1.2.9.1_rb1.5#n1407

> +		/* Fall through */
> +	case ONE_PT_CALIB2:
> +		base0 = (qfprom_cdata[0] & MSM8939_BASE0_MASK);
> +		p1[0] = (qfprom_cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
> +		p1[1] = (qfprom_cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
> +		p1[2] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
> +		p1[3] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5;
> +		p1[4] = (qfprom_cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
> +		p1[5] = (qfprom_cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
> +		p1[6] = (qfprom_cdata[1] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
> +		p1[7] = (qfprom_cdata[1] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
> +		//yes, 7 is missing in downstream

Not really.

https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/thermal/msm8974-tsens.c?h=LA.BR.1.2.9.1_rb1.5#n1331

> +		p1[8] = (qfprom_cdata[1] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
> +		p1[9] = (qfprom_cdata[1] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
> +		for (i = 0; i < priv->num_sensors; i++)
> +			p1[i] = (((base0) + p1[i]) << 3);
> +		break;
> +	default:
> +		for (i = 0; i < priv->num_sensors; i++) {
> +			p1[i] = 500;
> +			p2[i] = 780;
> +		}
> +		break;
> +	}
> +
> +	compute_intercept_slope(priv, p1, p2, mode);
> +	kfree(qfprom_cdata);
> +	kfree(qfprom_csel);
> +
> +	return 0;
> +}
> +
>  static int calibrate_8974(struct tsens_priv *priv)
>  {
>  	int base1 = 0, base2 = 0, i;
> @@ -325,7 +450,7 @@ static int calibrate_8974(struct tsens_priv *priv)
>  	return 0;
>  }
>  
> -/* v0.1: 8916, 8974 */
> +/* v0.1: 8916, 8939, 8974 */
>  
>  static struct tsens_features tsens_v0_1_feat = {
>  	.ver_major	= VER_0_1,
> @@ -386,6 +511,21 @@ struct tsens_plat_data data_8916 = {
>  	.fields	= tsens_v0_1_regfields,
>  };
>  
> +static const struct tsens_ops ops_8939 = {
> +	.init		= init_common,
> +	.calibrate	= calibrate_8939,
> +	.get_temp	= get_temp_common,
> +};
> +
> +struct tsens_plat_data data_8939 = {
> +	.num_sensors	= 10,
> +	.ops		= &ops_8939,
> +	.hw_ids		= (unsigned int []){0, 1, 2, 4, 5, 6, 7, 8, 9 },

Should be { 0, 1, 2, 4, 5, 6, 7, 8, 9, 10 }.

https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/arch/arm/boot/dts/qcom/msm8939-v3.0.dtsi?h=LA.BR.1.2.9.1_rb1.5#n670

Shawn

> +
> +	.feat		= &tsens_v0_1_feat,
> +	.fields	= tsens_v0_1_regfields,
> +};
> +
>  static const struct tsens_ops ops_8974 = {
>  	.init		= init_common,
>  	.calibrate	= calibrate_8974,
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 2f77d235cf735..f654057e96ae1 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -59,6 +59,9 @@ static const struct of_device_id tsens_table[] = {
>  	{
>  		.compatible = "qcom,msm8916-tsens",
>  		.data = &data_8916,
> +	}, {
> +		.compatible = "qcom,msm8939-tsens",
> +		.data = &data_8939,
>  	}, {
>  		.compatible = "qcom,msm8974-tsens",
>  		.data = &data_8974,
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 502acf0e68285..403b15546f648 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -590,7 +590,7 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data);
>  extern struct tsens_plat_data data_8960;
>  
>  /* TSENS v0.1 targets */
> -extern struct tsens_plat_data data_8916, data_8974;
> +extern struct tsens_plat_data data_8916, data_8939, data_8974;
>  
>  /* TSENS v1 targets */
>  extern struct tsens_plat_data data_tsens_v1, data_8976;
> -- 
> 2.26.1
>
Konrad Dybcio June 28, 2020, 8:02 a.m. UTC | #4
Hi Shawn,

Thanks for your review.

>For the record, I'm working my version of msm8939 tsens driver support,
>and I would highlight the things that differ from this patch.

I would be absolutely happy if you superseded that patch with your one, as
I'm currently working on sdm630.

Otherwise, thanks for pointing out the stuff I got wrong in the first place.

Regards
Konrad
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 959a9371d205c..29b95886273b7 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -48,6 +48,64 @@ 
 #define MSM8916_CAL_SEL_MASK	0xe0000000
 #define MSM8916_CAL_SEL_SHIFT	29
 
+/* eeprom layout data for 8939 */
+#define MSM8939_BASE0_MASK           0x000000ff
+#define MSM8939_BASE1_MASK           0xff000000
+#define MSM8939_BASE0_SHIFT
+#define MSM8939_BASE1_SHIFT          24
+
+#define MSM8939_S0_P1_MASK         0x000001f8
+#define MSM8939_S1_P1_MASK         0x001f8000
+#define MSM8939_S2_P1_MASK_0_4     0xf8000000
+#define MSM8939_S2_P1_MASK_5       0x00000001
+#define MSM8939_S3_P1_MASK         0x00001f80
+#define MSM8939_S4_P1_MASK         0x01f80000
+#define MSM8939_S5_P1_MASK         0x00003f00
+#define MSM8939_S6_P1_MASK         0x03f00000
+#define MSM8939_S7_P1_MASK         0x0000003f
+#define MSM8939_S8_P1_MASK         0x0003f000
+#define MSM8939_S9_P1_MASK         0x07e00000
+
+#define MSM8939_S0_P2_MASK         0x00007e00
+#define MSM8939_S1_P2_MASK         0x07e00000
+#define MSM8939_S2_P2_MASK         0x0000007e
+#define MSM8939_S3_P2_MASK         0x0007e000
+#define MSM8939_S4_P2_MASK         0x7e000000
+#define MSM8939_S5_P2_MASK         0x000fc000
+#define MSM8939_S6_P2_MASK         0xfc000000
+#define MSM8939_S7_P2_MASK         0x00000fc0
+#define MSM8939_S8_P2_MASK         0x00fc0000
+#define MSM8939_S9_P2_MASK_0_4     0xf8000000
+#define MSM8939_S9_P2_MASK_5       0x00002000
+
+#define MSM8939_CAL_SEL_MASK	0xc0000000
+#define MSM8939_CAL_SEL_SHIFT	0
+
+
+#define MSM8939_S0_P1_SHIFT        3
+#define MSM8939_S1_P1_SHIFT        15
+#define MSM8939_S2_P1_SHIFT_0_4    27
+#define MSM8939_S2_P1_SHIFT_5      5
+#define MSM8939_S3_P1_SHIFT        7
+#define MSM8939_S4_P1_SHIFT        19
+#define MSM8939_S5_P1_SHIFT        8
+#define MSM8939_S6_P1_SHIFT        20
+//yes, 7 is missing in downstream
+#define MSM8939_S8_P1_SHIFT        12
+#define MSM8939_S9_P1_SHIFT        21
+
+#define MSM8939_S0_P2_SHIFT        9
+#define MSM8939_S1_P2_SHIFT        21
+#define MSM8939_S2_P2_SHIFT        1
+#define MSM8939_S3_P2_SHIFT        13
+#define MSM8939_S4_P2_SHIFT        25
+#define MSM8939_S5_P2_SHIFT        14
+#define MSM8939_S6_P2_SHIFT        26
+#define MSM8939_S7_P2_SHIFT        6
+#define MSM8939_S8_P2_SHIFT        18
+#define MSM8939_S9_P2_SHIFT_0_4    27
+#define MSM8939_S9_P2_SHIFT_5      8
+
 /* eeprom layout data for 8974 */
 #define BASE1_MASK		0xff
 #define S0_P1_MASK		0x3f00
@@ -189,6 +247,73 @@  static int calibrate_8916(struct tsens_priv *priv)
 	return 0;
 }
 
+static int calibrate_8939(struct tsens_priv *priv)
+{
+	int base0 = 0, base1 = 0, i;
+	u32 p1[11], p2[11];
+	int mode = 0;
+	u32 *qfprom_cdata, *qfprom_csel;
+
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
+	if (IS_ERR(qfprom_csel)) {
+		kfree(qfprom_cdata);
+		return PTR_ERR(qfprom_csel);
+	}
+
+	mode = (qfprom_csel[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
+	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base1 = (qfprom_cdata[1] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
+		p2[0] = (qfprom_cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
+		p2[1] = (qfprom_cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
+		p2[2] = (qfprom_cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
+		p2[3] = (qfprom_cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
+		p2[4] = (qfprom_cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
+		p2[5] = (qfprom_cdata[1] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
+		p2[6] = (qfprom_cdata[1] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
+		p2[7] = (qfprom_cdata[1] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
+		p2[8] = (qfprom_cdata[1] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
+		p2[9] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
+		p2[10] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5;
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] = ((base1 + p2[i]) << 3);
+		/* Fall through */
+	case ONE_PT_CALIB2:
+		base0 = (qfprom_cdata[0] & MSM8939_BASE0_MASK);
+		p1[0] = (qfprom_cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
+		p1[1] = (qfprom_cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
+		p1[2] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
+		p1[3] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5;
+		p1[4] = (qfprom_cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
+		p1[5] = (qfprom_cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
+		p1[6] = (qfprom_cdata[1] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
+		p1[7] = (qfprom_cdata[1] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
+		//yes, 7 is missing in downstream
+		p1[8] = (qfprom_cdata[1] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
+		p1[9] = (qfprom_cdata[1] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] = (((base0) + p1[i]) << 3);
+		break;
+	default:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+	kfree(qfprom_csel);
+
+	return 0;
+}
+
 static int calibrate_8974(struct tsens_priv *priv)
 {
 	int base1 = 0, base2 = 0, i;
@@ -325,7 +450,7 @@  static int calibrate_8974(struct tsens_priv *priv)
 	return 0;
 }
 
-/* v0.1: 8916, 8974 */
+/* v0.1: 8916, 8939, 8974 */
 
 static struct tsens_features tsens_v0_1_feat = {
 	.ver_major	= VER_0_1,
@@ -386,6 +511,21 @@  struct tsens_plat_data data_8916 = {
 	.fields	= tsens_v0_1_regfields,
 };
 
+static const struct tsens_ops ops_8939 = {
+	.init		= init_common,
+	.calibrate	= calibrate_8939,
+	.get_temp	= get_temp_common,
+};
+
+struct tsens_plat_data data_8939 = {
+	.num_sensors	= 10,
+	.ops		= &ops_8939,
+	.hw_ids		= (unsigned int []){0, 1, 2, 4, 5, 6, 7, 8, 9 },
+
+	.feat		= &tsens_v0_1_feat,
+	.fields	= tsens_v0_1_regfields,
+};
+
 static const struct tsens_ops ops_8974 = {
 	.init		= init_common,
 	.calibrate	= calibrate_8974,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 2f77d235cf735..f654057e96ae1 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -59,6 +59,9 @@  static const struct of_device_id tsens_table[] = {
 	{
 		.compatible = "qcom,msm8916-tsens",
 		.data = &data_8916,
+	}, {
+		.compatible = "qcom,msm8939-tsens",
+		.data = &data_8939,
 	}, {
 		.compatible = "qcom,msm8974-tsens",
 		.data = &data_8974,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 502acf0e68285..403b15546f648 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -590,7 +590,7 @@  irqreturn_t tsens_critical_irq_thread(int irq, void *data);
 extern struct tsens_plat_data data_8960;
 
 /* TSENS v0.1 targets */
-extern struct tsens_plat_data data_8916, data_8974;
+extern struct tsens_plat_data data_8916, data_8939, data_8974;
 
 /* TSENS v1 targets */
 extern struct tsens_plat_data data_tsens_v1, data_8976;