diff mbox series

[4/4] dt-bindings: split DT schema check rules

Message ID 20200625170434.635114-5-masahiroy@kernel.org (mailing list archive)
State New, archived
Headers show
Series dt-bindings: fix 'make clean' and improve dt-schema check rules | expand

Commit Message

Masahiro Yamada June 25, 2020, 5:04 p.m. UTC 
When building %.dt.yaml from %.dts, two things happen in a row:

 [1] Run DTC to convert %.dts into %.dt.yaml

 [2] Run dt-validate against %.dt.yaml

Currently, when any .yaml schema file is updated, processed-schema.yaml
is regenerated, then both [1] and [2] are rerun for all .dts files.

Actually, we do not need to rerun [1] since the original .dts is not
updated.

Split the rule to avoid unneeded .dts/.dt.yaml conversion.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 .gitignore                                 |  1 +
 Documentation/devicetree/bindings/Makefile |  4 ++--
 Makefile                                   |  2 +-
 scripts/Makefile.build                     |  2 ++
 scripts/Makefile.lib                       | 24 ++++++++++------------
 5 files changed, 17 insertions(+), 16 deletions(-)

Comments

Rob Herring June 29, 2020, 8:49 p.m. UTC | #1 
On Thu, Jun 25, 2020 at 11:05 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> When building %.dt.yaml from %.dts, two things happen in a row:
>
>  [1] Run DTC to convert %.dts into %.dt.yaml
>
>  [2] Run dt-validate against %.dt.yaml
>
> Currently, when any .yaml schema file is updated, processed-schema.yaml
> is regenerated, then both [1] and [2] are rerun for all .dts files.
>
> Actually, we do not need to rerun [1] since the original .dts is not
> updated.

I have plans (and an intern working on it) to integrate the schema
checks into dtc. That's going to make turning on the schema checks
just a flag to dtc. I'm not sure if adding the complexity here is
worth it as I'd expect much of this patch to go away again.

Is there any negative impact on the absolute clean build time? I'm
more concerned about that than optimizing rerunning.

Rob
Masahiro Yamada June 30, 2020, 1:51 a.m. UTC | #2 
On Tue, Jun 30, 2020 at 5:50 AM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Thu, Jun 25, 2020 at 11:05 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> >
> > When building %.dt.yaml from %.dts, two things happen in a row:
> >
> >  [1] Run DTC to convert %.dts into %.dt.yaml
> >
> >  [2] Run dt-validate against %.dt.yaml
> >
> > Currently, when any .yaml schema file is updated, processed-schema.yaml
> > is regenerated, then both [1] and [2] are rerun for all .dts files.
> >
> > Actually, we do not need to rerun [1] since the original .dts is not
> > updated.
>
> I have plans (and an intern working on it) to integrate the schema
> checks into dtc. That's going to make turning on the schema checks
> just a flag to dtc. I'm not sure if adding the complexity here is
> worth it as I'd expect much of this patch to go away again.
>
> Is there any negative impact on the absolute clean build time? I'm
> more concerned about that than optimizing rerunning.

No benefit on the absolute clean build time.

OK, then please skip this patch.
diff mbox series

Patch

diff --git a/.gitignore b/.gitignore
index 87b9dd8a163b..a1941faf7233 100644
--- a/.gitignore
+++ b/.gitignore
@@ -16,6 +16,7 @@ 
 *.bin
 *.bz2
 *.c.[012]*.*
+*.dt.checked
 *.dt.yaml
 *.dtb
 *.dtb.S
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 6aac57588e66..b46910eb7cf4 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -62,11 +62,11 @@  $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
 endif
 
 extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.checked, $(DT_SCHEMA_FILES))
 extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
 extra-$(CHECK_DTBS) += processed-schema.yaml
 
 # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
 # build artifacts here before they are processed by scripts/Makefile.clean
 clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
-			-name '*.example.dt.yaml' \) -delete 2>/dev/null)
+			-name '*.example.dt.checked' \) -delete 2>/dev/null)
diff --git a/Makefile b/Makefile
index ac2c61c37a73..0fc778b656d1 100644
--- a/Makefile
+++ b/Makefile
@@ -1774,7 +1774,7 @@  clean: $(clean-dirs)
 		-o -name '*.lex.c' -o -name '*.tab.[ch]' \
 		-o -name '*.asn1.[ch]' \
 		-o -name '*.symtypes' -o -name 'modules.order' \
-		-o -name '.tmp_*.o.*' \
+		-o -name '.tmp_*.o.*' -o -name '*.dt.checked' \
 		-o -name '*.c.[012]*.*' \
 		-o -name '*.ll' \
 		-o -name '*.gcno' \) -type f -print | xargs rm -f
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 2e8810b7e5ed..ca24c3077fef 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -442,10 +442,12 @@  intermediate_targets = $(foreach sfx, $(2), \
 					$(filter %$(strip $(1)), $(targets))))
 # %.asn1.o <- %.asn1.[ch] <- %.asn1
 # %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
+# %.dt.checked <- %.dt.yaml <- %.dts
 # %.lex.o <- %.lex.c <- %.l
 # %.tab.o <- %.tab.[ch] <- %.y
 targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
 	   $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
+	   $(call intermediate_targets, .dt.checked, .dt.yaml) \
 	   $(call intermediate_targets, .lex.o, .lex.c) \
 	   $(call intermediate_targets, .tab.o, .tab.c .tab.h)
 
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index fa5022133a25..d72a7cf79f63 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -74,8 +74,8 @@  extra-y				+= $(dtb-y)
 extra-$(CONFIG_OF_ALL_DTBS)	+= $(dtb-)
 
 ifneq ($(CHECK_DTBS),)
-extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
-extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
+extra-y += $(patsubst %.dtb,%.dt.checked, $(dtb-y))
+extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.checked, $(dtb-))
 endif
 
 # Add subdir path
@@ -308,26 +308,24 @@  cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
 		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
 	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
 
+dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+
 $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
 	$(call if_changed_dep,dtc)
 
+$(obj)/%.dt.yaml: $(src)/%.dts $(DTC) FORCE
+	$(call if_changed_dep,dtc)
+
 DT_CHECKER ?= dt-validate
 DT_BINDING_DIR := Documentation/devicetree/bindings
 # DT_TMP_SCHEMA may be overridden from Documentation/devicetree/bindings/Makefile
 DT_TMP_SCHEMA ?= $(objtree)/$(DT_BINDING_DIR)/processed-schema.yaml
 
-quiet_cmd_dtb_check =	CHECK   $@
-      cmd_dtb_check =	$(DT_CHECKER) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@
+quiet_cmd_dt_check = CHECK   $<
+      cmd_dt_check = $(DT_CHECKER) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $<; touch $@
 
-define rule_dtc
-	$(call cmd_and_fixdep,dtc)
-	$(call cmd,dtb_check)
-endef
-
-$(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
-	$(call if_changed_rule,dtc,yaml)
-
-dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+$(obj)/%.dt.checked: $(obj)/%.dt.yaml $(DT_TMP_SCHEMA) FORCE
+	$(call if_changed,dt_check)
 
 # Bzip2
 # ---------------------------------------------------------------------------