| Message ID | 1593410042-10598-4-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Support building i.MX8 SoCs clock driver as module | expand |
> From: Anson Huang <Anson.Huang@nxp.com> > Sent: Monday, June 29, 2020 1:54 PM > > i.MX common clock drivers may support module build, so it is NOT selected by > default, for ARCH_MXC ARMv7 platforms, need to select it manually in each SoC > to make build pass. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > --- > Changes since V2: > - manually select the MXC_CLK in each SoC instead of selecting it > for ARCH_MXC. Any reason to do this? Regards Aisheng > --- > arch/arm/mach-imx/Kconfig | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index > e7d7b90..a465c0f 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -58,6 +58,7 @@ config SOC_IMX21 > select CPU_ARM926T > select IMX_HAVE_IOMUX_V1 > select MXC_AVIC > + select MXC_CLK > > config SOC_IMX27 > bool > @@ -65,17 +66,20 @@ config SOC_IMX27 > select IMX_HAVE_IOMUX_V1 > select MXC_AVIC > select PINCTRL_IMX27 > + select MXC_CLK > > config SOC_IMX31 > bool > select CPU_V6 > select MXC_AVIC > + select MXC_CLK > > config SOC_IMX35 > bool > select ARCH_MXC_IOMUX_V3 > select MXC_AVIC > select PINCTRL_IMX35 > + select MXC_CLK > > if ARCH_MULTI_V5 > > @@ -419,6 +423,7 @@ config SOC_IMX1 > select CPU_ARM920T > select MXC_AVIC > select PINCTRL_IMX1 > + select MXC_CLK > help > This enables support for Freescale i.MX1 processor > > @@ -432,6 +437,7 @@ config SOC_IMX25 > select CPU_ARM926T > select MXC_AVIC > select PINCTRL_IMX25 > + select MXC_CLK > help > This enables support for Freescale i.MX25 processor endif @@ -444,6 > +450,7 @@ config SOC_IMX5 > bool > select HAVE_IMX_SRC > select MXC_TZIC > + select MXC_CLK > > config SOC_IMX50 > bool "i.MX50 support" > @@ -477,6 +484,7 @@ config SOC_IMX6 > select HAVE_IMX_MMDC > select HAVE_IMX_SRC > select MFD_SYSCON > + select MXC_CLK > select PL310_ERRATA_769419 if CACHE_L2X0 > > config SOC_IMX6Q > @@ -561,6 +569,7 @@ config SOC_IMX7D_CM4 config SOC_IMX7D > bool "i.MX7 Dual support" > select PINCTRL_IMX7D > + select MXC_CLK > select SOC_IMX7D_CA7 if ARCH_MULTI_V7 > select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M > select ARM_ERRATA_814220 if ARCH_MULTI_V7 @@ -571,6 +580,7 @@ > config SOC_IMX7ULP > bool "i.MX7ULP support" > select CLKSRC_IMX_TPM > select PINCTRL_IMX7ULP > + select MXC_CLK > select SOC_IMX7D_CA7 if ARCH_MULTI_V7 > select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M > help > @@ -580,6 +590,7 @@ config SOC_VF610 > bool "Vybrid Family VF610 support" > select ARM_GIC if ARCH_MULTI_V7 > select PINCTRL_VF610 > + select MXC_CLK > > help > This enables support for Freescale Vybrid VF610 processor. > -- > 2.7.4
> Subject: RE: [PATCH V3 03/10] ARM: imx: Select MXC_CLK for each SoC > > > From: Anson Huang <Anson.Huang@nxp.com> > > Sent: Monday, June 29, 2020 1:54 PM > > > > i.MX common clock drivers may support module build, so it is NOT > > selected by default, for ARCH_MXC ARMv7 platforms, need to select it > > manually in each SoC to make build pass. > > > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > > --- > > Changes since V2: > > - manually select the MXC_CLK in each SoC instead of selecting it > > for ARCH_MXC. > > Any reason to do this? Form the discussion, looks like selecting it for each SoC make more sense, as there is no CLK_IMX* for i.MX6/7, or am I misunderstanding Stephen's comment? Just use previous implementation of selecting it once in ARCH_MXC? Anson
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index e7d7b90..a465c0f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -58,6 +58,7 @@ config SOC_IMX21 select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MXC_AVIC + select MXC_CLK config SOC_IMX27 bool @@ -65,17 +66,20 @@ config SOC_IMX27 select IMX_HAVE_IOMUX_V1 select MXC_AVIC select PINCTRL_IMX27 + select MXC_CLK config SOC_IMX31 bool select CPU_V6 select MXC_AVIC + select MXC_CLK config SOC_IMX35 bool select ARCH_MXC_IOMUX_V3 select MXC_AVIC select PINCTRL_IMX35 + select MXC_CLK if ARCH_MULTI_V5 @@ -419,6 +423,7 @@ config SOC_IMX1 select CPU_ARM920T select MXC_AVIC select PINCTRL_IMX1 + select MXC_CLK help This enables support for Freescale i.MX1 processor @@ -432,6 +437,7 @@ config SOC_IMX25 select CPU_ARM926T select MXC_AVIC select PINCTRL_IMX25 + select MXC_CLK help This enables support for Freescale i.MX25 processor endif @@ -444,6 +450,7 @@ config SOC_IMX5 bool select HAVE_IMX_SRC select MXC_TZIC + select MXC_CLK config SOC_IMX50 bool "i.MX50 support" @@ -477,6 +484,7 @@ config SOC_IMX6 select HAVE_IMX_MMDC select HAVE_IMX_SRC select MFD_SYSCON + select MXC_CLK select PL310_ERRATA_769419 if CACHE_L2X0 config SOC_IMX6Q @@ -561,6 +569,7 @@ config SOC_IMX7D_CM4 config SOC_IMX7D bool "i.MX7 Dual support" select PINCTRL_IMX7D + select MXC_CLK select SOC_IMX7D_CA7 if ARCH_MULTI_V7 select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M select ARM_ERRATA_814220 if ARCH_MULTI_V7 @@ -571,6 +580,7 @@ config SOC_IMX7ULP bool "i.MX7ULP support" select CLKSRC_IMX_TPM select PINCTRL_IMX7ULP + select MXC_CLK select SOC_IMX7D_CA7 if ARCH_MULTI_V7 select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M help @@ -580,6 +590,7 @@ config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC if ARCH_MULTI_V7 select PINCTRL_VF610 + select MXC_CLK help This enables support for Freescale Vybrid VF610 processor.
i.MX common clock drivers may support module build, so it is NOT selected by default, for ARCH_MXC ARMv7 platforms, need to select it manually in each SoC to make build pass. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- Changes since V2: - manually select the MXC_CLK in each SoC instead of selecting it for ARCH_MXC. --- arch/arm/mach-imx/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)