diff mbox series

i2c: rk3x: support master_xfer_atomic

Message ID 20200623120646.2175569-1-john@metanate.com (mailing list archive)
State New, archived
Headers show
Series i2c: rk3x: support master_xfer_atomic | expand

Commit Message

John Keeping June 23, 2020, 12:06 p.m. UTC
Enable i2c transactions in irq disabled contexts like poweroff where the
PMIC is connected via i2c.

Signed-off-by: John Keeping <john@metanate.com>
---
 drivers/i2c/busses/i2c-rk3x.c | 39 +++++++++++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 4 deletions(-)

Comments

Heiko Stübner July 3, 2020, 10:08 a.m. UTC | #1
Am Dienstag, 23. Juni 2020, 14:06:46 CEST schrieb John Keeping:
> Enable i2c transactions in irq disabled contexts like poweroff where the
> PMIC is connected via i2c.
> 
> Signed-off-by: John Keeping <john@metanate.com>

on a rk3288:
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> ---
>  drivers/i2c/busses/i2c-rk3x.c | 39 +++++++++++++++++++++++++++++++----
>  1 file changed, 35 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index 15324bfbc6cb..8e3cc85d1921 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -10,6 +10,7 @@
>  #include <linux/module.h>
>  #include <linux/i2c.h>
>  #include <linux/interrupt.h>
> +#include <linux/iopoll.h>
>  #include <linux/errno.h>
>  #include <linux/err.h>
>  #include <linux/platform_device.h>
> @@ -1040,8 +1041,21 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num)
>  	return ret;
>  }
>  
> -static int rk3x_i2c_xfer(struct i2c_adapter *adap,
> -			 struct i2c_msg *msgs, int num)
> +static int rk3x_i2c_wait_xfer_poll(struct rk3x_i2c *i2c)
> +{
> +	ktime_t timeout = ktime_add_ms(ktime_get(), WAIT_TIMEOUT);
> +
> +	while (READ_ONCE(i2c->busy) &&
> +	       ktime_compare(ktime_get(), timeout) < 0) {
> +		udelay(5);
> +		rk3x_i2c_irq(0, i2c);
> +	}
> +
> +	return !i2c->busy;
> +}
> +
> +static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
> +				struct i2c_msg *msgs, int num, bool polling)
>  {
>  	struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data;
>  	unsigned long timeout, flags;
> @@ -1075,8 +1089,12 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
>  
>  		rk3x_i2c_start(i2c);
>  
> -		timeout = wait_event_timeout(i2c->wait, !i2c->busy,
> -					     msecs_to_jiffies(WAIT_TIMEOUT));
> +		if (!polling) {
> +			timeout = wait_event_timeout(i2c->wait, !i2c->busy,
> +						     msecs_to_jiffies(WAIT_TIMEOUT));
> +		} else {
> +			timeout = rk3x_i2c_wait_xfer_poll(i2c);
> +		}
>  
>  		spin_lock_irqsave(&i2c->lock, flags);
>  
> @@ -1110,6 +1128,18 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
>  	return ret < 0 ? ret : num;
>  }
>  
> +static int rk3x_i2c_xfer(struct i2c_adapter *adap,
> +			 struct i2c_msg *msgs, int num)
> +{
> +	return rk3x_i2c_xfer_common(adap, msgs, num, false);
> +}
> +
> +static int rk3x_i2c_xfer_polling(struct i2c_adapter *adap,
> +				 struct i2c_msg *msgs, int num)
> +{
> +	return rk3x_i2c_xfer_common(adap, msgs, num, true);
> +}
> +
>  static __maybe_unused int rk3x_i2c_resume(struct device *dev)
>  {
>  	struct rk3x_i2c *i2c = dev_get_drvdata(dev);
> @@ -1126,6 +1156,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap)
>  
>  static const struct i2c_algorithm rk3x_i2c_algorithm = {
>  	.master_xfer		= rk3x_i2c_xfer,
> +	.master_xfer_atomic	= rk3x_i2c_xfer_polling,
>  	.functionality		= rk3x_i2c_func,
>  };
>  
>
Wolfram Sang July 4, 2020, 6:46 a.m. UTC | #2
On Tue, Jun 23, 2020 at 01:06:46PM +0100, John Keeping wrote:
> Enable i2c transactions in irq disabled contexts like poweroff where the
> PMIC is connected via i2c.
> 
> Signed-off-by: John Keeping <john@metanate.com>

Applied to for-next, thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 15324bfbc6cb..8e3cc85d1921 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -10,6 +10,7 @@ 
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
+#include <linux/iopoll.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -1040,8 +1041,21 @@  static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num)
 	return ret;
 }
 
-static int rk3x_i2c_xfer(struct i2c_adapter *adap,
-			 struct i2c_msg *msgs, int num)
+static int rk3x_i2c_wait_xfer_poll(struct rk3x_i2c *i2c)
+{
+	ktime_t timeout = ktime_add_ms(ktime_get(), WAIT_TIMEOUT);
+
+	while (READ_ONCE(i2c->busy) &&
+	       ktime_compare(ktime_get(), timeout) < 0) {
+		udelay(5);
+		rk3x_i2c_irq(0, i2c);
+	}
+
+	return !i2c->busy;
+}
+
+static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
+				struct i2c_msg *msgs, int num, bool polling)
 {
 	struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data;
 	unsigned long timeout, flags;
@@ -1075,8 +1089,12 @@  static int rk3x_i2c_xfer(struct i2c_adapter *adap,
 
 		rk3x_i2c_start(i2c);
 
-		timeout = wait_event_timeout(i2c->wait, !i2c->busy,
-					     msecs_to_jiffies(WAIT_TIMEOUT));
+		if (!polling) {
+			timeout = wait_event_timeout(i2c->wait, !i2c->busy,
+						     msecs_to_jiffies(WAIT_TIMEOUT));
+		} else {
+			timeout = rk3x_i2c_wait_xfer_poll(i2c);
+		}
 
 		spin_lock_irqsave(&i2c->lock, flags);
 
@@ -1110,6 +1128,18 @@  static int rk3x_i2c_xfer(struct i2c_adapter *adap,
 	return ret < 0 ? ret : num;
 }
 
+static int rk3x_i2c_xfer(struct i2c_adapter *adap,
+			 struct i2c_msg *msgs, int num)
+{
+	return rk3x_i2c_xfer_common(adap, msgs, num, false);
+}
+
+static int rk3x_i2c_xfer_polling(struct i2c_adapter *adap,
+				 struct i2c_msg *msgs, int num)
+{
+	return rk3x_i2c_xfer_common(adap, msgs, num, true);
+}
+
 static __maybe_unused int rk3x_i2c_resume(struct device *dev)
 {
 	struct rk3x_i2c *i2c = dev_get_drvdata(dev);
@@ -1126,6 +1156,7 @@  static u32 rk3x_i2c_func(struct i2c_adapter *adap)
 
 static const struct i2c_algorithm rk3x_i2c_algorithm = {
 	.master_xfer		= rk3x_i2c_xfer,
+	.master_xfer_atomic	= rk3x_i2c_xfer_polling,
 	.functionality		= rk3x_i2c_func,
 };