diff mbox series

arm64: dts: exynos: Add minimal bootargs

Message ID 20200703182536.9190-1-alim.akhtar@samsung.com (mailing list archive)
State Changes Requested
Headers show
Series arm64: dts: exynos: Add minimal bootargs | expand

Commit Message

Alim Akhtar July 3, 2020, 6:25 p.m. UTC
Add minimal bootargs to enable earlycon and console.
This really useful in case kernel has crashed early in
boot process.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 1 +
 1 file changed, 1 insertion(+)


base-commit: 9e50b94b3eb0d859a2586b5a40d7fd6e5afd9210

Comments

Alim Akhtar July 3, 2020, 6:49 p.m. UTC | #1
Adding Krzysztof's correct email address.
Sorry about noise.

> -----Original Message-----
> From: Alim Akhtar <alim.akhtar@samsung.com>
> Sent: 03 July 2020 23:56
> To: rzk@kernel.org
> Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> samsung-soc@vger.kernel.org; linux-kernel@vger.kernel.org;
> robh+dt@kernel.org; Alim Akhtar <alim.akhtar@samsung.com>
> Subject: [PATCH] arm64: dts: exynos: Add minimal bootargs
> 
> Add minimal bootargs to enable earlycon and console.
> This really useful in case kernel has crashed early in boot process.
> 
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> index 790f12ca8981..d7b42d5a3b2d 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> @@ -24,6 +24,7 @@
> 
>  	chosen {
>  		stdout-path = &serial_2;
> +		bootargs = "earlycon=exynos4210,0x14c30000
> console=ttySAC0,115200n8";
>  	};
> 
>  	memory@40000000 {
> 
> base-commit: 9e50b94b3eb0d859a2586b5a40d7fd6e5afd9210
> --
> 2.17.1
Krzysztof Kozlowski July 4, 2020, 10:22 a.m. UTC | #2
On Sat, Jul 04, 2020 at 12:19:40AM +0530, Alim Akhtar wrote:
> Adding Krzysztof's correct email address.
> Sorry about noise.
> 
> > -----Original Message-----
> > From: Alim Akhtar <alim.akhtar@samsung.com>
> > Sent: 03 July 2020 23:56
> > To: rzk@kernel.org
> > Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> > samsung-soc@vger.kernel.org; linux-kernel@vger.kernel.org;
> > robh+dt@kernel.org; Alim Akhtar <alim.akhtar@samsung.com>
> > Subject: [PATCH] arm64: dts: exynos: Add minimal bootargs
> > 
> > Add minimal bootargs to enable earlycon and console.
> > This really useful in case kernel has crashed early in boot process.
> > 
> > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> > ---
> >  arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> > b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> > index 790f12ca8981..d7b42d5a3b2d 100644
> > --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> > +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> > @@ -24,6 +24,7 @@
> > 
> >  	chosen {
> >  		stdout-path = &serial_2;
> > +		bootargs = "earlycon=exynos4210,0x14c30000
> > console=ttySAC0,115200n8";

Hi,

The console is already chosen by stdout-path and earlycon would use it
as well, so no need for the address. It should be just "earlycon" if you
want to enable it unconditionally.

Also, why did you use different serial for console?

However the question is, are you sure you want earlycon on every,
including successful boot? On most of the boards we do not enable by
default. If developer needs, he can choose it for example via U-Boot
"setenv opts earlycon".

However it's a development kit so it could be enabled on default...

Best regards,
Krzysztof

> >  	};
> > 
> >  	memory@40000000 {
> > 
> > base-commit: 9e50b94b3eb0d859a2586b5a40d7fd6e5afd9210
> > --
> > 2.17.1
> 
>
Alim Akhtar July 5, 2020, 1:39 a.m. UTC | #3
Hi Krzysztof,

> > > @@ -24,6 +24,7 @@
> > >
> > >  	chosen {
> > >  		stdout-path = &serial_2;
> > > +		bootargs = "earlycon=exynos4210,0x14c30000
> > > console=ttySAC0,115200n8";
> 
> Hi,
> 
> The console is already chosen by stdout-path and earlycon would use it as well,
> so no need for the address. It should be just "earlycon" if you want to enable it
> unconditionally.
> 
Indeed only "earlycon" will do here. Thanks for point this out.

> Also, why did you use different serial for console?
> 
Once UART driver gets probed then console changes to ttySAC0. In case I am using stdout-path only,
after bootconsole is disabled, kernel logs re-start printing from beginning (which might be expected behaviour?)

[    0.012416] printk: console [tty0] enabled
[    0.016491] printk: bootconsole [exynos4210] disabled
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd032]
[    0.000000] Linux version 5.8.0-rc3-next-20200703-00008-g4af626444f4a-dirty (alim@alim) (aarch64-linux-gnu-gcc (Linaro GCC 7.4-2019.02) 7.4.1 20181213 [l0
[    0.000000] Machine model: Samsung Exynos7 Espresso board based on Exynos7

> However the question is, are you sure you want earlycon on every, including
> successful boot? On most of the boards we do not enable by default. If
> developer needs, he can choose it for example via U-Boot "setenv opts
> earlycon".
> 
Using U-Boot is not the case always, any bootload can be used to boot the Linux, currently I am Coreboot.
And 'earlycon' is not setup by default.
As Espresson board is development board, IMO it is ok to keep it enable all the time, this helps in quickly knowing what going on incase boot fails early.
Let me know if it is ok to keep " console=ttySAC0,115200n8" or shell I just re-spin with only 'earlycon'? or any other suggestion?

Thanks!

> However it's a development kit so it could be enabled on default...
> 
> Best regards,
> Krzysztof
> 
> > >  	};
> > >
> > >  	memory@40000000 {
> > >
> > > base-commit: 9e50b94b3eb0d859a2586b5a40d7fd6e5afd9210
> > > --
> > > 2.17.1
> >
> >
Krzysztof Kozlowski July 5, 2020, 6:09 p.m. UTC | #4
On Sun, Jul 05, 2020 at 07:09:14AM +0530, Alim Akhtar wrote:
> Hi Krzysztof,
> > Also, why did you use different serial for console?
> > 
> Once UART driver gets probed then console changes to ttySAC0. In case I am using stdout-path only,
> after bootconsole is disabled, kernel logs re-start printing from beginning (which might be expected behaviour?)
> 
> [    0.012416] printk: console [tty0] enabled
> [    0.016491] printk: bootconsole [exynos4210] disabled
> [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd032]
> [    0.000000] Linux version 5.8.0-rc3-next-20200703-00008-g4af626444f4a-dirty (alim@alim) (aarch64-linux-gnu-gcc (Linaro GCC 7.4-2019.02) 7.4.1 20181213 [l0
> [    0.000000] Machine model: Samsung Exynos7 Espresso board based on Exynos7
> 

No, this is not desired. The fix for it should not be redefining the
console to wrong argument.

For example on Odroid MC1 this problem does not exist:

[    0.000000] earlycon: exynos4210 at MMIO 0x12c20000 (options '115200n8')
[    0.000000] printk: bootconsole [exynos4210] enabled
[    3.111883] printk: console [ttySAC2] enabled
[    3.111883] printk: console [ttySAC2] enabled
[    3.120102] printk: bootconsole [exynos4210] disabled
[    3.120102] printk: bootconsole [exynos4210] disabled


but your console for some reason is tty0... why? Is your console
ttySAC2? Maybe it is the effect of alias:
serial0 = &serial_2;

> > However the question is, are you sure you want earlycon on every, including
> > successful boot? On most of the boards we do not enable by default. If
> > developer needs, he can choose it for example via U-Boot "setenv opts
> > earlycon".
> > 
> Using U-Boot is not the case always, any bootload can be used to boot the Linux, currently I am Coreboot.
> And 'earlycon' is not setup by default.
> As Espresson board is development board, IMO it is ok to keep it enable all the time, this helps in quickly knowing what going on incase boot fails early.
> Let me know if it is ok to keep " console=ttySAC0,115200n8" or shell I just re-spin with only 'earlycon'? or any other suggestion?

It should be just earlycon.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 790f12ca8981..d7b42d5a3b2d 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -24,6 +24,7 @@ 
 
 	chosen {
 		stdout-path = &serial_2;
+		bootargs = "earlycon=exynos4210,0x14c30000 console=ttySAC0,115200n8";
 	};
 
 	memory@40000000 {