diff mbox series

[v2,4/8] arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings

Message ID 20200702155149.12854-4-krzk@kernel.org (mailing list archive)
State New, archived
Headers show
Series [v2,1/8] dt-bindings: pwm: samsung: Do not require interrupts on Exynos SoCs | expand

Commit Message

Krzysztof Kozlowski July 2, 2020, 3:51 p.m. UTC 
There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:

    amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Remove the bus, as suggested by Marek
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 47 +++++++++-------------
 arch/arm64/boot/dts/exynos/exynos7.dtsi    | 47 +++++++++-------------
 2 files changed, 40 insertions(+), 54 deletions(-)

Comments

Alim Akhtar July 3, 2020, 5:23 p.m. UTC | #1 
Hi Krzysztof

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: 02 July 2020 21:22
> To: Thierry Reding <thierry.reding@gmail.com>; Uwe Kleine-König <u.kleine-
> koenig@pengutronix.de>; Lee Jones <lee.jones@linaro.org>; Rob Herring
> <robh+dt@kernel.org>; Kukjin Kim <kgene@kernel.org>; Krzysztof Kozlowski
> <krzk@kernel.org>; linux-pwm@vger.kernel.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> samsung-soc@vger.kernel.org
> Cc: Marek Szyprowski <m.szyprowski@samsung.com>; Bartlomiej Zolnierkiewicz
> <b.zolnierkie@samsung.com>; Sylwester Nawrocki <snawrocki@kernel.org>;
> Alim Akhtar <alim.akhtar@samsung.com>; Chanwoo Choi
> <cw00.choi@samsung.com>; Pankaj Dubey <pankaj.dubey@samsung.com>
> Subject: [PATCH v2 4/8] arm64: dts: exynos: Remove DMA controller bus node
> name to fix dtschema warnings
> 
> There is no need to keep DMA controller nodes under AMBA bus node.
> Remove the "amba" node to fix dtschema warnings like:
> 
>     amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-
> 9a-f]+)?$'
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
> 
> Changes since v1:
> 1. Remove the bus, as suggested by Marek
> ---
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 47 +++++++++-------------
>  arch/arm64/boot/dts/exynos/exynos7.dtsi    | 47 +++++++++-------------
>  2 files changed, 40 insertions(+), 54 deletions(-)
Krzysztof Kozlowski July 7, 2020, 6:44 a.m. UTC | #2 
On Thu, Jul 02, 2020 at 05:51:45PM +0200, Krzysztof Kozlowski wrote:
> There is no need to keep DMA controller nodes under AMBA bus node.
> Remove the "amba" node to fix dtschema warnings like:
> 
>     amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> ---
> 
> Changes since v1:

Applied.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 57b433a1c900..74ac4ac75865 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1756,33 +1756,26 @@ 
 			status = "disabled";
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@15610000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x15610000 0x1000>;
-				interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu_fsys CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@15600000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x15600000 0x1000>;
-				interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu_fsys CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: pdma@15610000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15610000 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@15600000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15600000 0x1000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		audio-subsystem@11400000 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index c0b63b0d39ab..b9ed6a33e290 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -105,33 +105,26 @@ 
 				<0x11006000 0x2000>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@10e10000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10E10000 0x1000>;
-				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock_fsys0 ACLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@10eb0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10EB0000 0x1000>;
-				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock_fsys0 ACLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: pdma@10e10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10E10000 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@10eb0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10EB0000 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		clock_topc: clock-controller@10570000 {