| Message ID | 20200615210608.21469-1-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Multiple fixes in PCIe qcom driver | expand |
Hi Ansuel, Thank you for the patience. On 6/16/20 12:05 AM, Ansuel Smith wrote: > This contains multiple fix for PCIe qcom driver. > Some optional reset and clocks were missing. > Fix a problem with no PARF programming that cause kernel lock on load. > Add support to force gen 1 speed if needed. (due to hardware limitation) > Add ipq8064 rev 2 support that use a different tx termination offset. > > v7: > * Rework GEN1 patch > > v6: > * Replace custom define > * Move define not used in 07 to 08 > > v5: > * Split PCI: qcom: Add ipq8064 rev2 variant and set tx term offset > > v4: > * Fix grammar error across all patch subject > * Use bulk api for clks > * Program PARF only in ipq8064 SoC > * Program tx term only in ipq8064 SoC > * Drop configurable tx-dempth rx-eq > * Make added clk optional > > v3: > * Fix check reported by checkpatch --strict > * Rename force_gen1 to gen > > v2: > * Drop iATU programming (already done in pcie init) > * Use max-link-speed instead of force-gen1 custom definition > * Drop MRRS to 256B (Can't find a realy reason why this was suggested) > * Introduce a new variant for different revision of ipq8064 > > Abhishek Sahu (1): > PCI: qcom: Change duplicate PCI reset to phy reset > > Ansuel Smith (10): > PCI: qcom: Add missing ipq806x clocks in PCIe driver > dt-bindings: PCI: qcom: Add missing clks > PCI: qcom: Add missing reset for ipq806x > dt-bindings: PCI: qcom: Add ext reset > PCI: qcom: Use bulk clk api and assert on error > PCI: qcom: Define some PARF params needed for ipq8064 SoC > PCI: qcom: Add support for tx term offset for rev 2.1.0 > PCI: qcom: Add ipq8064 rev2 variant > dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant > PCI: qcom: Replace define with standard value > > Sham Muthayyan (1): > PCI: qcom: Support pci speed set for ipq806x > > .../devicetree/bindings/pci/qcom,pcie.txt | 15 +- > drivers/pci/controller/dwc/pcie-qcom.c | 186 +++++++++++------- > 2 files changed, 128 insertions(+), 73 deletions(-) > For the whole set: Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
On Mon, Jun 15, 2020 at 11:05:56PM +0200, Ansuel Smith wrote: > This contains multiple fix for PCIe qcom driver. > Some optional reset and clocks were missing. > Fix a problem with no PARF programming that cause kernel lock on load. > Add support to force gen 1 speed if needed. (due to hardware limitation) > Add ipq8064 rev 2 support that use a different tx termination offset. > > v7: > * Rework GEN1 patch > > v6: > * Replace custom define > * Move define not used in 07 to 08 > > v5: > * Split PCI: qcom: Add ipq8064 rev2 variant and set tx term offset > > v4: > * Fix grammar error across all patch subject > * Use bulk api for clks > * Program PARF only in ipq8064 SoC > * Program tx term only in ipq8064 SoC > * Drop configurable tx-dempth rx-eq > * Make added clk optional > > v3: > * Fix check reported by checkpatch --strict > * Rename force_gen1 to gen > > v2: > * Drop iATU programming (already done in pcie init) > * Use max-link-speed instead of force-gen1 custom definition > * Drop MRRS to 256B (Can't find a realy reason why this was suggested) > * Introduce a new variant for different revision of ipq8064 > > Abhishek Sahu (1): > PCI: qcom: Change duplicate PCI reset to phy reset > > Ansuel Smith (10): > PCI: qcom: Add missing ipq806x clocks in PCIe driver > dt-bindings: PCI: qcom: Add missing clks > PCI: qcom: Add missing reset for ipq806x > dt-bindings: PCI: qcom: Add ext reset > PCI: qcom: Use bulk clk api and assert on error > PCI: qcom: Define some PARF params needed for ipq8064 SoC > PCI: qcom: Add support for tx term offset for rev 2.1.0 > PCI: qcom: Add ipq8064 rev2 variant > dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant > PCI: qcom: Replace define with standard value > > Sham Muthayyan (1): > PCI: qcom: Support pci speed set for ipq806x > > .../devicetree/bindings/pci/qcom,pcie.txt | 15 +- > drivers/pci/controller/dwc/pcie-qcom.c | 186 +++++++++++------- > 2 files changed, 128 insertions(+), 73 deletions(-) ACK missing on patches 8,9,12 please let me know how to proceed, thanks. Lorenzo
Hi Lorenzo, On 7/7/20 5:05 PM, Lorenzo Pieralisi wrote: > On Mon, Jun 15, 2020 at 11:05:56PM +0200, Ansuel Smith wrote: >> This contains multiple fix for PCIe qcom driver. >> Some optional reset and clocks were missing. >> Fix a problem with no PARF programming that cause kernel lock on load. >> Add support to force gen 1 speed if needed. (due to hardware limitation) >> Add ipq8064 rev 2 support that use a different tx termination offset. >> >> v7: >> * Rework GEN1 patch >> >> v6: >> * Replace custom define >> * Move define not used in 07 to 08 >> >> v5: >> * Split PCI: qcom: Add ipq8064 rev2 variant and set tx term offset >> >> v4: >> * Fix grammar error across all patch subject >> * Use bulk api for clks >> * Program PARF only in ipq8064 SoC >> * Program tx term only in ipq8064 SoC >> * Drop configurable tx-dempth rx-eq >> * Make added clk optional >> >> v3: >> * Fix check reported by checkpatch --strict >> * Rename force_gen1 to gen >> >> v2: >> * Drop iATU programming (already done in pcie init) >> * Use max-link-speed instead of force-gen1 custom definition >> * Drop MRRS to 256B (Can't find a realy reason why this was suggested) >> * Introduce a new variant for different revision of ipq8064 >> >> Abhishek Sahu (1): >> PCI: qcom: Change duplicate PCI reset to phy reset >> >> Ansuel Smith (10): >> PCI: qcom: Add missing ipq806x clocks in PCIe driver >> dt-bindings: PCI: qcom: Add missing clks >> PCI: qcom: Add missing reset for ipq806x >> dt-bindings: PCI: qcom: Add ext reset >> PCI: qcom: Use bulk clk api and assert on error >> PCI: qcom: Define some PARF params needed for ipq8064 SoC >> PCI: qcom: Add support for tx term offset for rev 2.1.0 >> PCI: qcom: Add ipq8064 rev2 variant >> dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant >> PCI: qcom: Replace define with standard value >> >> Sham Muthayyan (1): >> PCI: qcom: Support pci speed set for ipq806x >> >> .../devicetree/bindings/pci/qcom,pcie.txt | 15 +- >> drivers/pci/controller/dwc/pcie-qcom.c | 186 +++++++++++------- >> 2 files changed, 128 insertions(+), 73 deletions(-) > > ACK missing on patches 8,9,12 please let me know how to proceed, > thanks. You could use my acked-by for them: Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> > > Lorenzo >
On Mon, Jun 15, 2020 at 11:05:56PM +0200, Ansuel Smith wrote: > This contains multiple fix for PCIe qcom driver. > Some optional reset and clocks were missing. > Fix a problem with no PARF programming that cause kernel lock on load. > Add support to force gen 1 speed if needed. (due to hardware limitation) > Add ipq8064 rev 2 support that use a different tx termination offset. > > v7: > * Rework GEN1 patch > > v6: > * Replace custom define > * Move define not used in 07 to 08 > > v5: > * Split PCI: qcom: Add ipq8064 rev2 variant and set tx term offset > > v4: > * Fix grammar error across all patch subject > * Use bulk api for clks > * Program PARF only in ipq8064 SoC > * Program tx term only in ipq8064 SoC > * Drop configurable tx-dempth rx-eq > * Make added clk optional > > v3: > * Fix check reported by checkpatch --strict > * Rename force_gen1 to gen > > v2: > * Drop iATU programming (already done in pcie init) > * Use max-link-speed instead of force-gen1 custom definition > * Drop MRRS to 256B (Can't find a realy reason why this was suggested) > * Introduce a new variant for different revision of ipq8064 > > Abhishek Sahu (1): > PCI: qcom: Change duplicate PCI reset to phy reset > > Ansuel Smith (10): > PCI: qcom: Add missing ipq806x clocks in PCIe driver > dt-bindings: PCI: qcom: Add missing clks > PCI: qcom: Add missing reset for ipq806x > dt-bindings: PCI: qcom: Add ext reset > PCI: qcom: Use bulk clk api and assert on error > PCI: qcom: Define some PARF params needed for ipq8064 SoC > PCI: qcom: Add support for tx term offset for rev 2.1.0 > PCI: qcom: Add ipq8064 rev2 variant > dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant > PCI: qcom: Replace define with standard value > > Sham Muthayyan (1): > PCI: qcom: Support pci speed set for ipq806x > > .../devicetree/bindings/pci/qcom,pcie.txt | 15 +- > drivers/pci/controller/dwc/pcie-qcom.c | 186 +++++++++++------- > 2 files changed, 128 insertions(+), 73 deletions(-) Applied to pci/dwc for v5.9, thanks. Lorenzo