| Message ID | 20200708104023.3225-3-louis.kuo@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: support Mediatek sensor interface driver | expand |
On Wed, 08 Jul 2020 18:40:22 +0800, Louis Kuo wrote: > This patch adds the DT binding documentation for the sensor interface > module in Mediatek SoCs. > > Signed-off-by: Louis Kuo <louis.kuo@mediatek.com> > --- > .../bindings/media/mediatek-seninf.yaml | 223 ++++++++++++++++++ > 1 file changed, 223 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/mediatek-seninf.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/media/mediatek-seninf.example.dts:23:18: fatal error: dt-bindings/power/mt8183-power.h: No such file or directory #include <dt-bindings/power/mt8183-power.h> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. scripts/Makefile.lib:315: recipe for target 'Documentation/devicetree/bindings/media/mediatek-seninf.example.dt.yaml' failed make[1]: *** [Documentation/devicetree/bindings/media/mediatek-seninf.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... Makefile:1347: recipe for target 'dt_binding_check' failed make: *** [dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1325155 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
On Wed, Jul 08, 2020 at 06:40:22PM +0800, Louis Kuo wrote: > This patch adds the DT binding documentation for the sensor interface > module in Mediatek SoCs. > > Signed-off-by: Louis Kuo <louis.kuo@mediatek.com> > --- > .../bindings/media/mediatek-seninf.yaml | 223 ++++++++++++++++++ > 1 file changed, 223 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/mediatek-seninf.yaml > > diff --git a/Documentation/devicetree/bindings/media/mediatek-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek-seninf.yaml > new file mode 100644 > index 000000000000..917b393acc0c > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek-seninf.yaml > @@ -0,0 +1,223 @@ > +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) Not the right choice: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/mediatek-seninf.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek Sensor Interface (CSI) Device Tree Bindings > + > +maintainers: > + - Louis Kuo <louis.kuo@mediatek.com> > + > +description: | > + Seninf MIPI-CSI2 host driver is a HW camera interface controller. It support > + a widely adopted, simple, high-speed protocol primarily intended for > + point-to-point image and video transmission between cameras and host devices. > + > +properties: > + compatible: > + const: mediatek,mt8183-seninf > + > + reg: > + minItems: 1 > + > + interrupts: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + clocks: > + items: > + - description: Seninf camsys clock > + - description: Seninf top mux clock > + > + clock-names: > + items: > + - const: cam_seninf > + - const: top_mux_seninf > + > + phys: > + items: > + - description: Seninf mipi dphy > + > + phy-names: > + items: > + - const: seninf > + > + # See ./video-interfaces.txt for details > + ports: > + type: object > + additionalProperties: false > + > + properties: > + port@0: > + type: object > + description: connection point for sensor at port 0 > + additionalProperties: false > + > + properties: > + reg: > + const: 0 > + > + patternProperties: > + endpoint: > + type: object > + additionalProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + remote-endpoint: true > + > + port@1: > + type: object > + description: connection point for sensor at port 1 > + additionalProperties: false > + > + properties: > + reg: > + const: 1 > + > + patternProperties: > + endpoint: > + type: object > + additionalProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + remote-endpoint: true > + > + port@4: > + type: object > + description: connection point for camsys > + additionalProperties: false > + > + properties: > + reg: > + const: 4 > + > + patternProperties: > + endpoint: > + type: object > + additionalProperties: false > + > + properties: > + remote-endpoint: true > + > + required: > + - port@0 > + - port@1 > + - port@4 > + > +required: > + - compatible > + - interrupts > + - clocks > + - clock-names > + - power-domains > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + > + #include <dt-bindings/clock/mt8183-clk.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/mt8183-power.h> > + > + parent { > + #address-cells = <2>; > + #size-cells = <2>; > + > + seninf: seninf@1a040000 { > + compatible = "mediatek,mt8183-seninf"; > + reg = <0 0x1a040000 0 0x8000>; > + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>; > + power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>; > + clocks = <&camsys CLK_CAM_SENINF>, > + <&topckgen CLK_TOP_MUX_SENINF>; > + clock-names = "cam_seninf", "top_mux_seninf"; > + phys = <&mipi_dphy 0>; > + phy-names = "seninf"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mipi_in_bcam: endpoint { > + data-lanes = <0 1 3 4>; > + remote-endpoint = <&bcam_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + mipi_in_fcam: endpoint { > + data-lanes = <1>; > + remote-endpoint = <&fcam_out>; > + }; > + }; > + > + port@4 { > + reg = <4>; > + seninf_camisp_endpoint: endpoint { > + remote-endpoint = <&camisp_endpoint>; > + }; > + }; > + }; > + }; > + > + mipi_dphy: mipi_dphy@11c80000 { phy@... > + compatible = "mediatek,mt8183-mipi_dphy"; > + reg = <0 0x11C80000 0 0x6000>; > + #phy-cells = <1>; > + }; > + > + i2c2: i2c@11009000 { > + reg = <0 0x11009000 0 0x1000>; > + clock-frequency = <400000>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + wcam: camera@36 { > + compatible = "ovti,ov5695"; > + reg = <0x36>; > + > + port { > + bcam_out: endpoint { > + remote-endpoint = <&mipi_in_bcam>; > + data-lanes = <0 1 3 4>; > + }; > + }; > + }; > + }; > + > + i2c4: i2c@11008000 { > + reg = <0 0x11008000 0 0x1000>; > + clock-frequency = <400000>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ucam: camera@3c { > + compatible = "ovti,ov2685"; > + reg = <0x3c>; > + > + port { > + fcam_out: endpoint { > + remote-endpoint = <&mipi_in_fcam>; > + data-lanes = <1>; > + }; > + }; > + }; > + }; > + }; > \ No newline at end of file > -- > 2.18.0
diff --git a/Documentation/devicetree/bindings/media/mediatek-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek-seninf.yaml new file mode 100644 index 000000000000..917b393acc0c --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek-seninf.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek-seninf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Sensor Interface (CSI) Device Tree Bindings + +maintainers: + - Louis Kuo <louis.kuo@mediatek.com> + +description: | + Seninf MIPI-CSI2 host driver is a HW camera interface controller. It support + a widely adopted, simple, high-speed protocol primarily intended for + point-to-point image and video transmission between cameras and host devices. + +properties: + compatible: + const: mediatek,mt8183-seninf + + reg: + minItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Seninf camsys clock + - description: Seninf top mux clock + + clock-names: + items: + - const: cam_seninf + - const: top_mux_seninf + + phys: + items: + - description: Seninf mipi dphy + + phy-names: + items: + - const: seninf + + # See ./video-interfaces.txt for details + ports: + type: object + additionalProperties: false + + properties: + port@0: + type: object + description: connection point for sensor at port 0 + additionalProperties: false + + properties: + reg: + const: 0 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + remote-endpoint: true + + port@1: + type: object + description: connection point for sensor at port 1 + additionalProperties: false + + properties: + reg: + const: 1 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + remote-endpoint: true + + port@4: + type: object + description: connection point for camsys + additionalProperties: false + + properties: + reg: + const: 4 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - port@0 + - port@1 + - port@4 + +required: + - compatible + - interrupts + - clocks + - clock-names + - power-domains + - ports + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt8183-power.h> + + parent { + #address-cells = <2>; + #size-cells = <2>; + + seninf: seninf@1a040000 { + compatible = "mediatek,mt8183-seninf"; + reg = <0 0x1a040000 0 0x8000>; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>; + clocks = <&camsys CLK_CAM_SENINF>, + <&topckgen CLK_TOP_MUX_SENINF>; + clock-names = "cam_seninf", "top_mux_seninf"; + phys = <&mipi_dphy 0>; + phy-names = "seninf"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mipi_in_bcam: endpoint { + data-lanes = <0 1 3 4>; + remote-endpoint = <&bcam_out>; + }; + }; + + port@1 { + reg = <1>; + mipi_in_fcam: endpoint { + data-lanes = <1>; + remote-endpoint = <&fcam_out>; + }; + }; + + port@4 { + reg = <4>; + seninf_camisp_endpoint: endpoint { + remote-endpoint = <&camisp_endpoint>; + }; + }; + }; + }; + + mipi_dphy: mipi_dphy@11c80000 { + compatible = "mediatek,mt8183-mipi_dphy"; + reg = <0 0x11C80000 0 0x6000>; + #phy-cells = <1>; + }; + + i2c2: i2c@11009000 { + reg = <0 0x11009000 0 0x1000>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + + wcam: camera@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + + port { + bcam_out: endpoint { + remote-endpoint = <&mipi_in_bcam>; + data-lanes = <0 1 3 4>; + }; + }; + }; + }; + + i2c4: i2c@11008000 { + reg = <0 0x11008000 0 0x1000>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + + ucam: camera@3c { + compatible = "ovti,ov2685"; + reg = <0x3c>; + + port { + fcam_out: endpoint { + remote-endpoint = <&mipi_in_fcam>; + data-lanes = <1>; + }; + }; + }; + }; + }; \ No newline at end of file
This patch adds the DT binding documentation for the sensor interface module in Mediatek SoCs. Signed-off-by: Louis Kuo <louis.kuo@mediatek.com> --- .../bindings/media/mediatek-seninf.yaml | 223 ++++++++++++++++++ 1 file changed, 223 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek-seninf.yaml -- 2.18.0