diff mbox series

[1/2] mm/migrate: optimize migrate_vma_setup() for holes

Message ID 20200709165711.26584-2-rcampbell@nvidia.com (mailing list archive)
State New
Headers show
Series mm/migrate: optimize migrate_vma_setup() for holes | expand

Commit Message

Ralph Campbell July 9, 2020, 4:57 p.m. UTC
When migrating system memory to device private memory, if the source
address range is a valid VMA range and there is no memory or a zero page,
the source PFN array is marked as valid but with no PFN. This lets the
device driver allocate private memory and clear it, then insert the new
device private struct page into the CPU's page tables when
migrate_vma_pages() is called. migrate_vma_pages() only inserts the
new page if the VMA is an anonymous range. There is no point in telling
the device driver to allocate device private memory and then not migrate
the page. Instead, mark the source PFN array entries as not migrating to
avoid this overhead.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
---
 mm/migrate.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Comments

Bharata B Rao July 10, 2020, 6:35 a.m. UTC | #1
On Thu, Jul 09, 2020 at 09:57:10AM -0700, Ralph Campbell wrote:
> When migrating system memory to device private memory, if the source
> address range is a valid VMA range and there is no memory or a zero page,
> the source PFN array is marked as valid but with no PFN. This lets the
> device driver allocate private memory and clear it, then insert the new
> device private struct page into the CPU's page tables when
> migrate_vma_pages() is called. migrate_vma_pages() only inserts the
> new page if the VMA is an anonymous range. There is no point in telling
> the device driver to allocate device private memory and then not migrate
> the page. Instead, mark the source PFN array entries as not migrating to
> avoid this overhead.
> 
> Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
> ---
>  mm/migrate.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/mm/migrate.c b/mm/migrate.c
> index b0125c082549..8aa434691577 100644
> --- a/mm/migrate.c
> +++ b/mm/migrate.c
> @@ -2204,9 +2204,13 @@ static int migrate_vma_collect_hole(unsigned long start,
>  {
>  	struct migrate_vma *migrate = walk->private;
>  	unsigned long addr;
> +	unsigned long flags;
> +
> +	/* Only allow populating anonymous memory. */
> +	flags = vma_is_anonymous(walk->vma) ? MIGRATE_PFN_MIGRATE : 0;
>  
>  	for (addr = start; addr < end; addr += PAGE_SIZE) {
> -		migrate->src[migrate->npages] = MIGRATE_PFN_MIGRATE;
> +		migrate->src[migrate->npages] = flags;

I see a few other such cases where we directly populate MIGRATE_PFN_MIGRATE
w/o a pfn in migrate_vma_collect_pmd() and wonder why the vma_is_anonymous()
check can't help there as well?

1. pte_none() check in migrate_vma_collect_pmd()
2. is_zero_pfn() check in migrate_vma_collect_pmd()

Regards,
Bharata.
Ralph Campbell July 10, 2020, 4:19 p.m. UTC | #2
On 7/9/20 11:35 PM, Bharata B Rao wrote:
> On Thu, Jul 09, 2020 at 09:57:10AM -0700, Ralph Campbell wrote:
>> When migrating system memory to device private memory, if the source
>> address range is a valid VMA range and there is no memory or a zero page,
>> the source PFN array is marked as valid but with no PFN. This lets the
>> device driver allocate private memory and clear it, then insert the new
>> device private struct page into the CPU's page tables when
>> migrate_vma_pages() is called. migrate_vma_pages() only inserts the
>> new page if the VMA is an anonymous range. There is no point in telling
>> the device driver to allocate device private memory and then not migrate
>> the page. Instead, mark the source PFN array entries as not migrating to
>> avoid this overhead.
>>
>> Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
>> ---
>>   mm/migrate.c | 6 +++++-
>>   1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/mm/migrate.c b/mm/migrate.c
>> index b0125c082549..8aa434691577 100644
>> --- a/mm/migrate.c
>> +++ b/mm/migrate.c
>> @@ -2204,9 +2204,13 @@ static int migrate_vma_collect_hole(unsigned long start,
>>   {
>>   	struct migrate_vma *migrate = walk->private;
>>   	unsigned long addr;
>> +	unsigned long flags;
>> +
>> +	/* Only allow populating anonymous memory. */
>> +	flags = vma_is_anonymous(walk->vma) ? MIGRATE_PFN_MIGRATE : 0;
>>   
>>   	for (addr = start; addr < end; addr += PAGE_SIZE) {
>> -		migrate->src[migrate->npages] = MIGRATE_PFN_MIGRATE;
>> +		migrate->src[migrate->npages] = flags;
> 
> I see a few other such cases where we directly populate MIGRATE_PFN_MIGRATE
> w/o a pfn in migrate_vma_collect_pmd() and wonder why the vma_is_anonymous()
> check can't help there as well?
> 
> 1. pte_none() check in migrate_vma_collect_pmd()
> 2. is_zero_pfn() check in migrate_vma_collect_pmd()
> 
> Regards,
> Bharata.

For case 1, this seems like a useful addition.
For case 2, the zero page is only inserted if the VMA is marked read-only and
anonymous so I don't think the check is needed.
I'll post a v2 with the change.

Thanks for the suggestions!
diff mbox series

Patch

diff --git a/mm/migrate.c b/mm/migrate.c
index b0125c082549..8aa434691577 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -2204,9 +2204,13 @@  static int migrate_vma_collect_hole(unsigned long start,
 {
 	struct migrate_vma *migrate = walk->private;
 	unsigned long addr;
+	unsigned long flags;
+
+	/* Only allow populating anonymous memory. */
+	flags = vma_is_anonymous(walk->vma) ? MIGRATE_PFN_MIGRATE : 0;
 
 	for (addr = start; addr < end; addr += PAGE_SIZE) {
-		migrate->src[migrate->npages] = MIGRATE_PFN_MIGRATE;
+		migrate->src[migrate->npages] = flags;
 		migrate->dst[migrate->npages] = 0;
 		migrate->npages++;
 		migrate->cpages++;