diff mbox series

[1/3] ARM: dts: colibri-imx6: remove pinctrl-names orphan

Message ID 20200710132423.497230-1-philippe.schenker@toradex.com (mailing list archive)
State New, archived
Headers show
Series [1/3] ARM: dts: colibri-imx6: remove pinctrl-names orphan | expand

Commit Message

Philippe Schenker July 10, 2020, 1:24 p.m. UTC
This is not necessary without a pinctrl-0 statement. Remove this
orphan.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

 arch/arm/boot/dts/imx6qdl-colibri.dtsi | 1 -
 1 file changed, 1 deletion(-)

Comments

Oleksandr Suvorov July 10, 2020, 1:42 p.m. UTC | #1
On Fri, Jul 10, 2020 at 4:25 PM Philippe Schenker
<philippe.schenker@toradex.com> wrote:
>
> This is not necessary without a pinctrl-0 statement. Remove this
> orphan.
>
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

> ---
>
>  arch/arm/boot/dts/imx6qdl-colibri.dtsi | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> index 240b86d2eb71..a4a54c82e28f 100644
> --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> @@ -362,7 +362,6 @@ &uart3 {
>  };
>
>  &usbotg {
> -       pinctrl-names = "default";
>         disable-over-current;
>         dr_mode = "peripheral";
>         status = "disabled";
> --
> 2.27.0
>
Shawn Guo July 13, 2020, 9:01 a.m. UTC | #2
On Fri, Jul 10, 2020 at 03:24:21PM +0200, Philippe Schenker wrote:
> This is not necessary without a pinctrl-0 statement. Remove this
> orphan.
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

Applied all, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 240b86d2eb71..a4a54c82e28f 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -362,7 +362,6 @@  &uart3 {
 };
 
 &usbotg {
-	pinctrl-names = "default";
 	disable-over-current;
 	dr_mode = "peripheral";
 	status = "disabled";