@@ -211,35 +211,37 @@ Bulk wrapper to a storage device at address 5::
Raw binary format and API
=========================
-The overall architecture of the API is about the same as the one above,
-only the events are delivered in binary format. Each event is sent in
-the following structure (its name is made up, so that we can refer to it)::
-
- struct usbmon_packet {
- u64 id; /* 0: URB ID - from submission to callback */
- unsigned char type; /* 8: Same as text; extensible. */
- unsigned char xfer_type; /* ISO (0), Intr, Control, Bulk (3) */
- unsigned char epnum; /* Endpoint number and transfer direction */
- unsigned char devnum; /* Device address */
- u16 busnum; /* 12: Bus number */
- char flag_setup; /* 14: Same as text */
- char flag_data; /* 15: Same as text; Binary zero is OK. */
- s64 ts_sec; /* 16: gettimeofday */
- s32 ts_usec; /* 24: gettimeofday */
- int status; /* 28: */
- unsigned int length; /* 32: Length of data (submitted or actual) */
- unsigned int len_cap; /* 36: Delivered length */
+The overall architecture of the API is about the same as the one above, only the
+events are delivered in binary format. The structures and constants are defined
+in include/uapi/linux/usb/mon.h.
+
+Each event is sent in the following structure::
+
+ struct mon_bin_hdr {
+ __u64 id; /* 0: URB ID - from submission to callback */
+ __u8 type; /* 8: Same as text; extensible. */
+ __u8 xfer_type; /* ISO (0), Intr, Control, Bulk (3) */
+ __u8 epnum; /* Endpoint number and transfer direction */
+ __u8 devnum; /* Device address */
+ __u16 busnum; /* 12: Bus number */
+ __s8 flag_setup; /* 14: Same as text */
+ __s8 flag_data; /* 15: Same as text; Binary zero is OK. */
+ __s64 ts_sec; /* 16: gettimeofday */
+ __s32 ts_usec; /* 24: gettimeofday */
+ __s32 status; /* 28: */
+ __u32 length; /* 32: Length of data (submitted or actual) */
+ __u32 len_cap; /* 36: Delivered length */
union { /* 40: */
- unsigned char setup[SETUP_LEN]; /* Only for Control S-type */
+ __u8 setup[MON_USB_SETUP_LEN]; /* Only for Control S-type */
struct iso_rec { /* Only for ISO */
- int error_count;
- int numdesc;
+ __s32 error_count;
+ __s32 numdesc;
} iso;
} s;
- int interval; /* 48: Only for Interrupt and ISO */
- int start_frame; /* 52: For ISO */
- unsigned int xfer_flags; /* 56: copy of URB's transfer_flags */
- unsigned int ndesc; /* 60: Actual number of ISO descriptors */
+ __s32 interval; /* 48: Only for Interrupt and ISO */
+ __s32 start_frame; /* 52: For ISO */
+ __u32 xfer_flags; /* 56: copy of URB's transfer_flags */
+ __u32 ndesc; /* 60: Actual number of ISO descriptors */
}; /* 64 total length */
These events can be received from a character device by reading with read(2),
@@ -267,8 +269,8 @@ no events are available.
The argument is a pointer to the following structure::
struct mon_bin_stats {
- u32 queued;
- u32 dropped;
+ __u32 queued;
+ __u32 dropped;
};
The member "queued" refers to the number of events currently queued in the
@@ -296,9 +298,9 @@ then return the first event. The argument is a pointer to the following
structure::
struct mon_get_arg {
- struct usbmon_packet *hdr;
+ struct mon_bin_hdr *hdr;
void *data;
- size_t alloc; /* Length of data (can be zero) */
+ __kernel_size_t alloc; /* Length of data (can be zero) */
};
Before the call, hdr, data, and alloc should be filled. Upon return, the area
@@ -313,9 +315,9 @@ This ioctl is primarily used when the application accesses the buffer
with mmap(2). Its argument is a pointer to the following structure::
struct mon_mfetch_arg {
- uint32_t *offvec; /* Vector of events fetched */
- uint32_t nfetch; /* Number of events to fetch (out: fetched) */
- uint32_t nflush; /* Number of events to flush */
+ __u32 *offvec; /* Vector of events fetched */
+ __u32 nfetch; /* Number of events to fetch (out: fetched) */
+ __u32 nflush; /* Number of events to flush */
};
The ioctl operates in 3 stages.
@@ -350,7 +352,7 @@ To prepare, map the buffer by getting the current size, then using mmap(2).
Then, execute a loop similar to the one written in pseudo-code below::
struct mon_mfetch_arg fetch;
- struct usbmon_packet *hdr;
+ struct mon_bin_hdr *hdr;
int nflush = 0;
for (;;) {
fetch.offvec = vec; // Has N 32-bit words
@@ -359,7 +361,7 @@ Then, execute a loop similar to the one written in pseudo-code below::
ioctl(fd, MON_IOCX_MFETCH, &fetch); // Process errors, too
nflush = fetch.nfetch; // This many packets to flush when done
for (i = 0; i < nflush; i++) {
- hdr = (struct ubsmon_packet *) &mmap_area[vec[i]];
+ hdr = (struct mon_bin_hdr *) &mmap_area[vec[i]];
if (hdr->type == '@') // Filler packet
continue;
caddr_t data = &mmap_area[vec[i]] + 64;
@@ -23,34 +23,10 @@
#include <linux/time64.h>
#include <linux/uaccess.h>
+#include <linux/usb/mon.h>
#include "usb_mon.h"
-/*
- * Defined by USB 2.0 clause 9.3, table 9.2.
- */
-#define SETUP_LEN 8
-
-/* ioctl macros */
-#define MON_IOC_MAGIC 0x92
-
-#define MON_IOCQ_URB_LEN _IO(MON_IOC_MAGIC, 1)
-/* #2 used to be MON_IOCX_URB, removed before it got into Linus tree */
-#define MON_IOCG_STATS _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats)
-#define MON_IOCT_RING_SIZE _IO(MON_IOC_MAGIC, 4)
-#define MON_IOCQ_RING_SIZE _IO(MON_IOC_MAGIC, 5)
-#define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
-#define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
-#define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
-/* #9 was MON_IOCT_SETAPI */
-#define MON_IOCX_GETX _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get)
-
-#ifdef CONFIG_COMPAT
-#define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
-#define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
-#define MON_IOCX_GETX32 _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get32)
-#endif
-
/*
* Some architectures have enormous basic pages (16KB for ia64, 64KB for ppc).
* But it's all right. Just use a simple way to make sure the chunk is never
@@ -81,38 +57,6 @@
#define BUFF_DFL CHUNK_ALIGN(300*1024)
#define BUFF_MIN CHUNK_ALIGN(8*1024)
-/*
- * The per-event API header (2 per URB).
- *
- * This structure is seen in userland as defined by the documentation.
- */
-struct mon_bin_hdr {
- u64 id; /* URB ID - from submission to callback */
- unsigned char type; /* Same as in text API; extensible. */
- unsigned char xfer_type; /* ISO, Intr, Control, Bulk */
- unsigned char epnum; /* Endpoint number and transfer direction */
- unsigned char devnum; /* Device address */
- unsigned short busnum; /* Bus number */
- char flag_setup;
- char flag_data;
- s64 ts_sec; /* ktime_get_real_ts64 */
- s32 ts_usec; /* ktime_get_real_ts64 */
- int status;
- unsigned int len_urb; /* Length of data (submitted or actual) */
- unsigned int len_cap; /* Delivered length */
- union {
- unsigned char setup[SETUP_LEN]; /* Only for Control S-type */
- struct iso_rec {
- int error_count;
- int numdesc;
- } iso;
- } s;
- int interval;
- int start_frame;
- unsigned int xfer_flags;
- unsigned int ndesc; /* Actual number of ISO descriptors */
-};
-
/*
* ISO vector, packed into the head of data stream.
* This has to take 16 bytes to make sure that the end of buffer
@@ -125,38 +69,6 @@ struct mon_bin_isodesc {
u32 _pad;
};
-/* per file statistic */
-struct mon_bin_stats {
- u32 queued;
- u32 dropped;
-};
-
-struct mon_bin_get {
- struct mon_bin_hdr __user *hdr; /* Can be 48 bytes or 64. */
- void __user *data;
- size_t alloc; /* Length of data (can be zero) */
-};
-
-struct mon_bin_mfetch {
- u32 __user *offvec; /* Vector of events fetched */
- u32 nfetch; /* Number of events to fetch (out: fetched) */
- u32 nflush; /* Number of events to flush */
-};
-
-#ifdef CONFIG_COMPAT
-struct mon_bin_get32 {
- u32 hdr32;
- u32 data32;
- u32 alloc32;
-};
-
-struct mon_bin_mfetch32 {
- u32 offvec32;
- u32 nfetch32;
- u32 nflush32;
-};
-#endif
-
/* Having these two values same prevents wrapping of the mon_bin_hdr */
#define PKT_ALIGN 64
#define PKT_SIZE 64
@@ -396,7 +308,7 @@ static inline char mon_bin_get_setup(unsigned char *setupb,
if (urb->setup_packet == NULL)
return 'Z';
- memcpy(setupb, urb->setup_packet, SETUP_LEN);
+ memcpy(setupb, urb->setup_packet, MON_USB_SETUP_LEN);
return 0;
}
new file mode 100644
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * USB Monitoring (usbmon) definitions
+ *
+ * See documentation in Documentation/usb/usbmon.rst.
+ *
+ * Copyright (C) 2006 Paolo Abeni (paolo.abeni@email.it)
+ * Copyright (C) 2006,2007 Pete Zaitcev (zaitcev@redhat.com)
+ */
+
+#ifndef __UAPI_LINUX_USB_MON_H
+#define __UAPI_LINUX_USB_MON_H
+
+#include <linux/types.h>
+
+/* ioctl macros */
+#define MON_IOC_MAGIC 0x92
+
+#define MON_IOCQ_URB_LEN _IO(MON_IOC_MAGIC, 1)
+/* #2 used to be MON_IOCX_URB, removed before it got into Linus tree */
+#define MON_IOCG_STATS _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats)
+#define MON_IOCT_RING_SIZE _IO(MON_IOC_MAGIC, 4)
+#define MON_IOCQ_RING_SIZE _IO(MON_IOC_MAGIC, 5)
+#define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
+#define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
+#define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+/* #9 was MON_IOCT_SETAPI */
+#define MON_IOCX_GETX _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get)
+
+/* ioctl structures */
+
+/* per file statistic */
+struct mon_bin_stats {
+ __u32 queued;
+ __u32 dropped;
+};
+
+struct mon_bin_get {
+ struct mon_bin_hdr __user *hdr; /* Can be 48 bytes or 64. */
+ void __user *data;
+ size_t alloc; /* Length of data (can be zero) */
+};
+
+struct mon_bin_mfetch {
+ __u32 __user *offvec; /* Vector of events fetched */
+ __u32 nfetch; /* Number of events to fetch (out: fetched) */
+ __u32 nflush; /* Number of events to flush */
+};
+
+
+/* Only defined with CONFIG_COMPAT */
+#define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
+#define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
+#define MON_IOCX_GETX32 _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get32)
+
+struct mon_bin_get32 {
+ __u32 hdr32;
+ __u32 data32;
+ __u32 alloc32;
+};
+
+struct mon_bin_mfetch32 {
+ __u32 offvec32;
+ __u32 nfetch32;
+ __u32 nflush32;
+};
+
+/* Data format */
+
+/*
+ * Defined by USB 2.0 clause 9.3, table 9.2.
+ */
+#define MON_USB_SETUP_LEN 8
+
+/*
+ * The per-event API header (2 per URB).
+ *
+ * This structure is seen in userland as defined by the documentation.
+ */
+struct mon_bin_hdr {
+ __u64 id; /* URB ID - from submission to callback */
+ __u8 type; /* Same as in text API; extensible. */
+ __u8 xfer_type; /* ISO, Intr, Control, Bulk */
+ __u8 epnum; /* Endpoint number and transfer direction */
+ __u8 devnum; /* Device address */
+ __u16 busnum; /* Bus number */
+ __s8 flag_setup;
+ __s8 flag_data;
+ __s64 ts_sec; /* ktime_get_real_ts64 */
+ __s32 ts_usec; /* ktime_get_real_ts64 */
+ __s32 status;
+ __u32 len_urb; /* Length of data (submitted or actual) */
+ __u32 len_cap; /* Delivered length */
+ union {
+ __u8 setup[MON_USB_SETUP_LEN]; /* Only for Control S-type */
+ struct iso_rec {
+ __s32 error_count;
+ __s32 numdesc;
+ } iso;
+ } s;
+ __s32 interval;
+ __s32 start_frame;
+ __u32 xfer_flags;
+ __u32 ndesc; /* Actual number of ISO descriptors */
+};
+
+#endif /* __UAPI_LINUX_USB_MON_H */
This allows applications to use the usbmon ioctl() without declaring the constants. Update the documentation to reflect the new header. Cc: linux-usb@vger.kernel.org Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Kris Katterjohn <katterjohn@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> --- Documentation/usb/usbmon.rst | 70 ++++++++++++----------- drivers/usb/mon/mon_bin.c | 92 +----------------------------- include/uapi/linux/usb/mon.h | 107 +++++++++++++++++++++++++++++++++++ 3 files changed, 145 insertions(+), 124 deletions(-) create mode 100644 include/uapi/linux/usb/mon.h