| Message ID | 20200717145324.292820-1-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | v4l2-subdev: Introduce [g|s]et_mbus_format pad op | expand |
On 17/07/2020 16:53, Jacopo Mondi wrote: > One more update to address Janusz comments on patch 1/10 > > 1) I have expanded the operation documentation slightly with: > > * applied to the hardware. The operation shall fail if the > - * pad index it has been called on is not valid. > + * pad index it has been called on is not valid or in case of > + * unrecoverable failures. > > 2) Added call wrapper to check for pad validity. I have for now ignored > the check_which() and check_cfg() calls as the operations do not > support TRY format. Looks good. If there are no new comments then I'll make the PR on Tuesday. Regards, Hans > > Thanks > j > > v7->v8 > - Add call wrappers to 1/10 > - Expand documentation to report error on failures > > v6.1->v7 > - Add [6/10] as suggested by Hans > - Add Niklas tag and fix his last comment in [10/10] > > v6->v6.1 > - Address Niklas' comments in the last patch for rcar-csi2 > > v5->v6: > - Report V4L2_MBUS_DATA_ACTIVE_HIGH in ov6650 get_mbus_config > - Check for the return value of get_mbus_config() at the end of > set_mbus_config() in ov6650 driver > > v4->v5: > - Address Sakari's comment on documentation (s/should/shall) > - Use a local variable for the number of active lanes in 9/9 > - Add Kieran's tags to 7/9 and 8/9 > - Fix a warning on operator precedence on 3/9 > > v3->v4: > - Remove g/s_mbus_config video operation > - Adjust pxa quick capture interface to properly handle bus mastering > - Reword the two new operations documentation > > v2->v3: > - Re-use v4l2_mbus_config and V4L2_MBUS_* flags > - Port existing drivers > - Update adv748x and rcar-csi2 patches to use V4L2_MBUS_* flags > > v1->v2: > - Address Sakari's comment to use unsigned int in place of bools > - Add two new patches to address documentation > - Adjust rcar-csi2 patch as much as possible according to Niklas comments > - Add Niklas's tags > > Jacopo Mondi (10): > media: v4l2-subdev: Introduce [get|set]_mbus_config pad ops > media: i2c: Use the new get_mbus_config pad op > media: i2c: ov6650: Use new [get|set]_mbus_config ops > media: pxa_camera: Use the new set_mbus_config op > media: v4l2-subdev: Remove [s|g]_mbus_config video ops > media: v4l2- mediabus: Add usage note for V4L2_MBUS_* > staging: media: imx: Update TODO entry > media: i2c: adv748x: Adjust TXA data lanes number > media: i2c: adv748x: Implement get_mbus_config > media: rcar-csi2: Negotiate data lanes number > > drivers/media/i2c/adv7180.c | 7 +- > drivers/media/i2c/adv748x/adv748x-core.c | 31 +++- > drivers/media/i2c/adv748x/adv748x-csi2.c | 31 ++++ > drivers/media/i2c/adv748x/adv748x.h | 1 + > drivers/media/i2c/ml86v7667.c | 7 +- > drivers/media/i2c/mt9m001.c | 7 +- > drivers/media/i2c/mt9m111.c | 7 +- > drivers/media/i2c/ov6650.c | 56 ++++-- > drivers/media/i2c/ov9640.c | 7 +- > drivers/media/i2c/tc358743.c | 7 +- > drivers/media/i2c/tvp5150.c | 7 +- > drivers/media/platform/pxa_camera.c | 189 ++++++-------------- > drivers/media/platform/rcar-vin/rcar-csi2.c | 75 +++++++- > drivers/media/v4l2-core/v4l2-subdev.c | 16 ++ > drivers/staging/media/imx/TODO | 4 + > include/media/v4l2-mediabus.h | 33 +++- > include/media/v4l2-subdev.h | 38 ++-- > 17 files changed, 318 insertions(+), 205 deletions(-) > > -- > 2.27.0 >