new file mode 100644
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8226 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ MSM8226 platform.
+
+properties:
+ compatible:
+ const: qcom,msm8226-pinctrl
+
+ reg:
+ description: Specifies the base address and size of the TLMM register space
+ maxItems: 1
+
+ interrupts:
+ description: Specifies the TLMM summary IRQ
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description: Specifies the PIN numbers and Flags, as defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins. Functions are only valid for gpio pins.
+ enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
+ blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+ blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+ blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ msmgpio: pinctrl@fd510000 {
+ compatible = "qcom,msm8226-pinctrl";
+ reg = <0xfd510000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&msmgpio 0 0 117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ serial-pins {
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
Add device tree binding Documentation details for Qualcomm msm8226 pinctrl driver. - Bindings documentation was based on qcom,ipq6018-pinctrl.yaml added by Sricharan R <sricharan@codeaurora.org> and then modified for msm8226 content Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> --- .../pinctrl/qcom,msm8226-pinctrl.yaml | 132 ++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml