[v3,0/3] Add functions to operate USB PHY related clock.

Message

Zhou Yanjie June 30, 2020, 4:38 p.m. UTC

v2->v3:
1.Remove the wrong "WARN()".
2.Remove extra blank line.
3.Fix wrong parameters in recalc_rate/set_rate functions.

周琰杰 (Zhou Yanjie) (3):
  clk: JZ4780: Add functions for enable and disable USB PHY.
  clk: JZ4780: Reformat the code to align it.
  clk: X1000: Add support for calculat REFCLK of USB PHY.

 drivers/clk/ingenic/jz4780-cgu.c | 153 ++++++++++++++++++++-------------------
 drivers/clk/ingenic/x1000-cgu.c  |  84 ++++++++++++++++++++-
 2 files changed, 162 insertions(+), 75 deletions(-)

Comments

Zhou Yanjie July 25, 2020, 4:01 a.m. UTC | #1

Gentle ping.

在 2020/7/1 上午12:38, 周琰杰 (Zhou Yanjie) 写道:
> v2->v3:
> 1.Remove the wrong "WARN()".
> 2.Remove extra blank line.
> 3.Fix wrong parameters in recalc_rate/set_rate functions.
>
> 周琰杰 (Zhou Yanjie) (3):
>    clk: JZ4780: Add functions for enable and disable USB PHY.
>    clk: JZ4780: Reformat the code to align it.
>    clk: X1000: Add support for calculat REFCLK of USB PHY.
>
>   drivers/clk/ingenic/jz4780-cgu.c | 153 ++++++++++++++++++++-------------------
>   drivers/clk/ingenic/x1000-cgu.c  |  84 ++++++++++++++++++++-
>   2 files changed, 162 insertions(+), 75 deletions(-)
>

Stephen Boyd July 28, 2020, 1:19 a.m. UTC | #2

Quoting Zhou Yanjie (2020-07-24 21:01:38)
> Gentle ping.
> 

I was hoping Paul would review but I guess not. I applied the patches to
clk-next.

Paul Cercueil July 28, 2020, 1:46 a.m. UTC | #3

Le lun. 27 juil. 2020 à 18:19, Stephen Boyd <[e-mail]> a 
écrit :
> Quoting Zhou Yanjie (2020-07-24 21:01:38)
>>  Gentle ping.
>> 
> 
> I was hoping Paul would review but I guess not. I applied the patches 
> to
> clk-next.

I did receive the "gentle ping" and was going to review it soonish :(

I said for v1 that I don't like how it comes out with magic Hz values...

-Paul