| Message ID | 1595932949-7033-1-git-send-email-crystal.guo@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] watchdog: mtk_wdt: remove mt8xxx-resets.h | expand |
On 28/07/2020 12:42, Crystal Guo wrote: > mt8xxx-resets.h actually just used to define TOPRGU_SW_RST_NUM. > Instead of resubmit the mt8xxx-reset.h for a new IC, get the number > of reset bits from dtsi is more easier to maintain. > We want to have all the reset numbers in one header file. It makes no sense to pass the reset number in one driver via DTS and in the rest through the header file. Sorry but from my side this is NACK. Regards, Matthias > Signed-off-by: Crystal Guo <crystal.guo@mediatek.com> > --- > drivers/watchdog/mtk_wdt.c | 26 +++++--------------------- > 1 file changed, 5 insertions(+), 21 deletions(-) > > diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c > index d6a6393..adc88c2 100644 > --- a/drivers/watchdog/mtk_wdt.c > +++ b/drivers/watchdog/mtk_wdt.c > @@ -9,8 +9,6 @@ > * Based on sunxi_wdt.c > */ > > -#include <dt-bindings/reset-controller/mt2712-resets.h> > -#include <dt-bindings/reset-controller/mt8183-resets.h> > #include <linux/delay.h> > #include <linux/err.h> > #include <linux/init.h> > @@ -64,18 +62,6 @@ struct mtk_wdt_dev { > struct reset_controller_dev rcdev; > }; > > -struct mtk_wdt_data { > - int toprgu_sw_rst_num; > -}; > - > -static const struct mtk_wdt_data mt2712_data = { > - .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM, > -}; > - > -static const struct mtk_wdt_data mt8183_data = { > - .toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM, > -}; > - > static int toprgu_reset_update(struct reset_controller_dev *rcdev, > unsigned long id, bool assert) > { > @@ -248,7 +234,7 @@ static int mtk_wdt_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > struct mtk_wdt_dev *mtk_wdt; > - const struct mtk_wdt_data *wdt_data; > + u32 toprgu_sw_rst_num; > int err; > > mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL); > @@ -284,10 +270,10 @@ static int mtk_wdt_probe(struct platform_device *pdev) > dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", > mtk_wdt->wdt_dev.timeout, nowayout); > > - wdt_data = of_device_get_match_data(dev); > - if (wdt_data) { > - err = toprgu_register_reset_controller(pdev, > - wdt_data->toprgu_sw_rst_num); > + err = of_property_read_u32(pdev->dev.of_node, "rst-num", > + &toprgu_sw_rst_num); > + if (!err) { > + err = toprgu_register_reset_controller(pdev, toprgu_sw_rst_num); > if (err) > return err; > } > @@ -319,9 +305,7 @@ static int mtk_wdt_resume(struct device *dev) > #endif > > static const struct of_device_id mtk_wdt_dt_ids[] = { > - { .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data }, > { .compatible = "mediatek,mt6589-wdt" }, > - { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data }, > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids); >
On 7/28/20 3:42 AM, Crystal Guo wrote: > mt8xxx-resets.h actually just used to define TOPRGU_SW_RST_NUM. > Instead of resubmit the mt8xxx-reset.h for a new IC, get the number > of reset bits from dtsi is more easier to maintain. > > Signed-off-by: Crystal Guo <crystal.guo@mediatek.com> > --- > drivers/watchdog/mtk_wdt.c | 26 +++++--------------------- > 1 file changed, 5 insertions(+), 21 deletions(-) > > diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c > index d6a6393..adc88c2 100644 > --- a/drivers/watchdog/mtk_wdt.c > +++ b/drivers/watchdog/mtk_wdt.c > @@ -9,8 +9,6 @@ > * Based on sunxi_wdt.c > */ > > -#include <dt-bindings/reset-controller/mt2712-resets.h> > -#include <dt-bindings/reset-controller/mt8183-resets.h> > #include <linux/delay.h> > #include <linux/err.h> > #include <linux/init.h> > @@ -64,18 +62,6 @@ struct mtk_wdt_dev { > struct reset_controller_dev rcdev; > }; > > -struct mtk_wdt_data { > - int toprgu_sw_rst_num; > -}; > - > -static const struct mtk_wdt_data mt2712_data = { > - .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM, > -}; > - > -static const struct mtk_wdt_data mt8183_data = { > - .toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM, > -}; > - > static int toprgu_reset_update(struct reset_controller_dev *rcdev, > unsigned long id, bool assert) > { > @@ -248,7 +234,7 @@ static int mtk_wdt_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > struct mtk_wdt_dev *mtk_wdt; > - const struct mtk_wdt_data *wdt_data; > + u32 toprgu_sw_rst_num; toprgu_sw_ is a completely unnecessary prefix for a local variable. > int err; > > mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL); > @@ -284,10 +270,10 @@ static int mtk_wdt_probe(struct platform_device *pdev) > dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", > mtk_wdt->wdt_dev.timeout, nowayout); > > - wdt_data = of_device_get_match_data(dev); > - if (wdt_data) { > - err = toprgu_register_reset_controller(pdev, > - wdt_data->toprgu_sw_rst_num); > + err = of_property_read_u32(pdev->dev.of_node, "rst-num", > + &toprgu_sw_rst_num); There is no such property. Maybe that is added with a subsequent patch or preceding patch, but that is not in -next. If this patch is applied without rst-num already present in affected devicetree files, the code will no longer work. That means this patch requires context, and can not be applied without it. That in turn means it can not be patch 1 of 3. Guenter > + if (!err) { > + err = toprgu_register_reset_controller(pdev, toprgu_sw_rst_num); > if (err) > return err; > } > @@ -319,9 +305,7 @@ static int mtk_wdt_resume(struct device *dev) > #endif > > static const struct of_device_id mtk_wdt_dt_ids[] = { > - { .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data }, > { .compatible = "mediatek,mt6589-wdt" }, > - { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data }, I don't see the point of removing the mediatek,mt2712-wdt and mediatek,mt8183-wdt compatible lines. > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids); >
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c index d6a6393..adc88c2 100644 --- a/drivers/watchdog/mtk_wdt.c +++ b/drivers/watchdog/mtk_wdt.c @@ -9,8 +9,6 @@ * Based on sunxi_wdt.c */ -#include <dt-bindings/reset-controller/mt2712-resets.h> -#include <dt-bindings/reset-controller/mt8183-resets.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/init.h> @@ -64,18 +62,6 @@ struct mtk_wdt_dev { struct reset_controller_dev rcdev; }; -struct mtk_wdt_data { - int toprgu_sw_rst_num; -}; - -static const struct mtk_wdt_data mt2712_data = { - .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM, -}; - -static const struct mtk_wdt_data mt8183_data = { - .toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM, -}; - static int toprgu_reset_update(struct reset_controller_dev *rcdev, unsigned long id, bool assert) { @@ -248,7 +234,7 @@ static int mtk_wdt_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct mtk_wdt_dev *mtk_wdt; - const struct mtk_wdt_data *wdt_data; + u32 toprgu_sw_rst_num; int err; mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL); @@ -284,10 +270,10 @@ static int mtk_wdt_probe(struct platform_device *pdev) dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout); - wdt_data = of_device_get_match_data(dev); - if (wdt_data) { - err = toprgu_register_reset_controller(pdev, - wdt_data->toprgu_sw_rst_num); + err = of_property_read_u32(pdev->dev.of_node, "rst-num", + &toprgu_sw_rst_num); + if (!err) { + err = toprgu_register_reset_controller(pdev, toprgu_sw_rst_num); if (err) return err; } @@ -319,9 +305,7 @@ static int mtk_wdt_resume(struct device *dev) #endif static const struct of_device_id mtk_wdt_dt_ids[] = { - { .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data }, { .compatible = "mediatek,mt6589-wdt" }, - { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids);
mt8xxx-resets.h actually just used to define TOPRGU_SW_RST_NUM. Instead of resubmit the mt8xxx-reset.h for a new IC, get the number of reset bits from dtsi is more easier to maintain. Signed-off-by: Crystal Guo <crystal.guo@mediatek.com> --- drivers/watchdog/mtk_wdt.c | 26 +++++--------------------- 1 file changed, 5 insertions(+), 21 deletions(-)