diff mbox series

[v2,2/4] i2c: mediatek: Add access to more than 8GB dram in i2c driver

Message ID 1595939446-5484-3-git-send-email-qii.wang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series add i2c support for mt8192 | expand

Commit Message

Qii Wang (王琪) July 28, 2020, 12:30 p.m. UTC
Newer MTK chip support more than 8GB of dram. Replace support_33bits
with more general dma_max_support and remove mtk_i2c_set_4g_mode.

Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
 drivers/i2c/busses/i2c-mt65xx.c | 38 +++++++++++++++++---------------------
 1 file changed, 17 insertions(+), 21 deletions(-)

Comments

Matthias Brugger July 29, 2020, 7:59 a.m. UTC | #1
On 28/07/2020 14:30, Qii Wang wrote:
> Newer MTK chip support more than 8GB of dram. Replace support_33bits
> with more general dma_max_support and remove mtk_i2c_set_4g_mode.
> 
> Signed-off-by: Qii Wang <qii.wang@mediatek.com>
> ---
>   drivers/i2c/busses/i2c-mt65xx.c | 38 +++++++++++++++++---------------------
>   1 file changed, 17 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index e6b984a..49777a6 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -204,11 +204,11 @@ struct mtk_i2c_compatible {
>   	unsigned char dcm: 1;
>   	unsigned char auto_restart: 1;
>   	unsigned char aux_len_reg: 1;
> -	unsigned char support_33bits: 1;
>   	unsigned char timing_adjust: 1;
>   	unsigned char dma_sync: 1;
>   	unsigned char ltiming_adjust: 1;
>   	unsigned char apdma_sync: 1;
> +	unsigned char max_dma_support;
>   };
>   
>   struct mtk_i2c_ac_timing {
> @@ -311,11 +311,11 @@ struct i2c_spec_values {
>   	.dcm = 1,
>   	.auto_restart = 1,
>   	.aux_len_reg = 1,
> -	.support_33bits = 1,
>   	.timing_adjust = 1,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
>   	.apdma_sync = 0,
> +	.max_dma_support = 33,
>   };
>   
>   static const struct mtk_i2c_compatible mt6577_compat = {
> @@ -325,11 +325,11 @@ struct i2c_spec_values {
>   	.dcm = 1,
>   	.auto_restart = 0,
>   	.aux_len_reg = 0,
> -	.support_33bits = 0,
>   	.timing_adjust = 0,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
>   	.apdma_sync = 0,
> +	.max_dma_support = 32,
>   };
>   
>   static const struct mtk_i2c_compatible mt6589_compat = {
> @@ -339,11 +339,11 @@ struct i2c_spec_values {
>   	.dcm = 0,
>   	.auto_restart = 0,
>   	.aux_len_reg = 0,
> -	.support_33bits = 0,
>   	.timing_adjust = 0,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
>   	.apdma_sync = 0,
> +	.max_dma_support = 32,
>   };
>   
>   static const struct mtk_i2c_compatible mt7622_compat = {
> @@ -353,11 +353,11 @@ struct i2c_spec_values {
>   	.dcm = 1,
>   	.auto_restart = 1,
>   	.aux_len_reg = 1,
> -	.support_33bits = 0,
>   	.timing_adjust = 0,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
>   	.apdma_sync = 0,
> +	.max_dma_support = 32,
>   };
>   
>   static const struct mtk_i2c_compatible mt8173_compat = {
> @@ -366,11 +366,11 @@ struct i2c_spec_values {
>   	.dcm = 1,
>   	.auto_restart = 1,
>   	.aux_len_reg = 1,
> -	.support_33bits = 1,
>   	.timing_adjust = 0,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
>   	.apdma_sync = 0,
> +	.max_dma_support = 33,
>   };
>   
>   static const struct mtk_i2c_compatible mt8183_compat = {
> @@ -380,11 +380,11 @@ struct i2c_spec_values {
>   	.dcm = 0,
>   	.auto_restart = 1,
>   	.aux_len_reg = 1,
> -	.support_33bits = 1,
>   	.timing_adjust = 1,
>   	.dma_sync = 1,
>   	.ltiming_adjust = 1,
>   	.apdma_sync = 0,
> +	.max_dma_support = 33,
>   };
>   
>   static const struct of_device_id mtk_i2c_of_match[] = {
> @@ -796,11 +796,6 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
>   	return 0;
>   }
>   
> -static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
> -{
> -	return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;

I think you missed my comment in the last version:
I2C_DMA_4G_MODE is no longer needed, you can delete it.

Regards,
Matthias

> -}
> -
>   static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>   			       int num, int left_num)
>   {
> @@ -885,8 +880,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>   			return -ENOMEM;
>   		}
>   
> -		if (i2c->dev_comp->support_33bits) {
> -			reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
> +		if (i2c->dev_comp->max_dma_support > 32) {
> +			reg_4g_mode = upper_32_bits(rpaddr);
>   			writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
>   		}
>   
> @@ -908,8 +903,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>   			return -ENOMEM;
>   		}
>   
> -		if (i2c->dev_comp->support_33bits) {
> -			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
> +		if (i2c->dev_comp->max_dma_support > 32) {
> +			reg_4g_mode = upper_32_bits(wpaddr);
>   			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
>   		}
>   
> @@ -954,11 +949,11 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>   			return -ENOMEM;
>   		}
>   
> -		if (i2c->dev_comp->support_33bits) {
> -			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
> +		if (i2c->dev_comp->max_dma_support > 32) {
> +			reg_4g_mode = upper_32_bits(wpaddr);
>   			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
>   
> -			reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
> +			reg_4g_mode = upper_32_bits(rpaddr);
>   			writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
>   		}
>   
> @@ -1232,8 +1227,9 @@ static int mtk_i2c_probe(struct platform_device *pdev)
>   		return -EINVAL;
>   	}
>   
> -	if (i2c->dev_comp->support_33bits) {
> -		ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
> +	if (i2c->dev_comp->max_dma_support > 32) {
> +		ret = dma_set_mask(&pdev->dev,
> +				DMA_BIT_MASK(i2c->dev_comp->max_dma_support));
>   		if (ret) {
>   			dev_err(&pdev->dev, "dma_set_mask return error.\n");
>   			return ret;
>
Qii Wang (王琪) July 29, 2020, 8:14 a.m. UTC | #2
On Wed, 2020-07-29 at 09:59 +0200, Matthias Brugger wrote:
> 
> On 28/07/2020 14:30, Qii Wang wrote:
> > Newer MTK chip support more than 8GB of dram. Replace support_33bits
> > with more general dma_max_support and remove mtk_i2c_set_4g_mode.
> > 
> > Signed-off-by: Qii Wang <qii.wang@mediatek.com>
> > ---
> >   drivers/i2c/busses/i2c-mt65xx.c | 38 +++++++++++++++++---------------------
> >   1 file changed, 17 insertions(+), 21 deletions(-)
> > 
> > diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> > index e6b984a..49777a6 100644
> > --- a/drivers/i2c/busses/i2c-mt65xx.c
> > +++ b/drivers/i2c/busses/i2c-mt65xx.c
> > @@ -204,11 +204,11 @@ struct mtk_i2c_compatible {
> >   	unsigned char dcm: 1;
> >   	unsigned char auto_restart: 1;
> >   	unsigned char aux_len_reg: 1;
> > -	unsigned char support_33bits: 1;
> >   	unsigned char timing_adjust: 1;
> >   	unsigned char dma_sync: 1;
> >   	unsigned char ltiming_adjust: 1;
> >   	unsigned char apdma_sync: 1;
> > +	unsigned char max_dma_support;
> >   };
> >   
> >   struct mtk_i2c_ac_timing {
> > @@ -311,11 +311,11 @@ struct i2c_spec_values {
> >   	.dcm = 1,
> >   	.auto_restart = 1,
> >   	.aux_len_reg = 1,
> > -	.support_33bits = 1,
> >   	.timing_adjust = 1,
> >   	.dma_sync = 0,
> >   	.ltiming_adjust = 0,
> >   	.apdma_sync = 0,
> > +	.max_dma_support = 33,
> >   };
> >   
> >   static const struct mtk_i2c_compatible mt6577_compat = {
> > @@ -325,11 +325,11 @@ struct i2c_spec_values {
> >   	.dcm = 1,
> >   	.auto_restart = 0,
> >   	.aux_len_reg = 0,
> > -	.support_33bits = 0,
> >   	.timing_adjust = 0,
> >   	.dma_sync = 0,
> >   	.ltiming_adjust = 0,
> >   	.apdma_sync = 0,
> > +	.max_dma_support = 32,
> >   };
> >   
> >   static const struct mtk_i2c_compatible mt6589_compat = {
> > @@ -339,11 +339,11 @@ struct i2c_spec_values {
> >   	.dcm = 0,
> >   	.auto_restart = 0,
> >   	.aux_len_reg = 0,
> > -	.support_33bits = 0,
> >   	.timing_adjust = 0,
> >   	.dma_sync = 0,
> >   	.ltiming_adjust = 0,
> >   	.apdma_sync = 0,
> > +	.max_dma_support = 32,
> >   };
> >   
> >   static const struct mtk_i2c_compatible mt7622_compat = {
> > @@ -353,11 +353,11 @@ struct i2c_spec_values {
> >   	.dcm = 1,
> >   	.auto_restart = 1,
> >   	.aux_len_reg = 1,
> > -	.support_33bits = 0,
> >   	.timing_adjust = 0,
> >   	.dma_sync = 0,
> >   	.ltiming_adjust = 0,
> >   	.apdma_sync = 0,
> > +	.max_dma_support = 32,
> >   };
> >   
> >   static const struct mtk_i2c_compatible mt8173_compat = {
> > @@ -366,11 +366,11 @@ struct i2c_spec_values {
> >   	.dcm = 1,
> >   	.auto_restart = 1,
> >   	.aux_len_reg = 1,
> > -	.support_33bits = 1,
> >   	.timing_adjust = 0,
> >   	.dma_sync = 0,
> >   	.ltiming_adjust = 0,
> >   	.apdma_sync = 0,
> > +	.max_dma_support = 33,
> >   };
> >   
> >   static const struct mtk_i2c_compatible mt8183_compat = {
> > @@ -380,11 +380,11 @@ struct i2c_spec_values {
> >   	.dcm = 0,
> >   	.auto_restart = 1,
> >   	.aux_len_reg = 1,
> > -	.support_33bits = 1,
> >   	.timing_adjust = 1,
> >   	.dma_sync = 1,
> >   	.ltiming_adjust = 1,
> >   	.apdma_sync = 0,
> > +	.max_dma_support = 33,
> >   };
> >   
> >   static const struct of_device_id mtk_i2c_of_match[] = {
> > @@ -796,11 +796,6 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
> >   	return 0;
> >   }
> >   
> > -static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
> > -{
> > -	return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
> 
> I think you missed my comment in the last version:
> I2C_DMA_4G_MODE is no longer needed, you can delete it.
> 
> Regards,
> Matthias
> 

Sorry for missing that comment, I will remove it.
Thank you for your comments and reminders.

> > -}
> > -
> >   static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> >   			       int num, int left_num)
> >   {
> > @@ -885,8 +880,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> >   			return -ENOMEM;
> >   		}
> >   
> > -		if (i2c->dev_comp->support_33bits) {
> > -			reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
> > +		if (i2c->dev_comp->max_dma_support > 32) {
> > +			reg_4g_mode = upper_32_bits(rpaddr);
> >   			writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
> >   		}
> >   
> > @@ -908,8 +903,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> >   			return -ENOMEM;
> >   		}
> >   
> > -		if (i2c->dev_comp->support_33bits) {
> > -			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
> > +		if (i2c->dev_comp->max_dma_support > 32) {
> > +			reg_4g_mode = upper_32_bits(wpaddr);
> >   			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
> >   		}
> >   
> > @@ -954,11 +949,11 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> >   			return -ENOMEM;
> >   		}
> >   
> > -		if (i2c->dev_comp->support_33bits) {
> > -			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
> > +		if (i2c->dev_comp->max_dma_support > 32) {
> > +			reg_4g_mode = upper_32_bits(wpaddr);
> >   			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
> >   
> > -			reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
> > +			reg_4g_mode = upper_32_bits(rpaddr);
> >   			writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
> >   		}
> >   
> > @@ -1232,8 +1227,9 @@ static int mtk_i2c_probe(struct platform_device *pdev)
> >   		return -EINVAL;
> >   	}
> >   
> > -	if (i2c->dev_comp->support_33bits) {
> > -		ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
> > +	if (i2c->dev_comp->max_dma_support > 32) {
> > +		ret = dma_set_mask(&pdev->dev,
> > +				DMA_BIT_MASK(i2c->dev_comp->max_dma_support));
> >   		if (ret) {
> >   			dev_err(&pdev->dev, "dma_set_mask return error.\n");
> >   			return ret;
> >
Yingjoe Chen July 30, 2020, 2:39 a.m. UTC | #3
On Tue, 2020-07-28 at 20:30 +0800, Qii Wang wrote:
> Newer MTK chip support more than 8GB of dram. Replace support_33bits
> with more general dma_max_support and remove mtk_i2c_set_4g_mode.
> 
> Signed-off-by: Qii Wang <qii.wang@mediatek.com>

Qii,

After you remove I2C_DMA_4G_MODE Matthias mentioned, you can have:

Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>

Joe.C
Wolfram Sang Aug. 5, 2020, 8:56 a.m. UTC | #4
> > > -static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
> > > -{
> > > -	return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
> > 
> > I think you missed my comment in the last version:
> > I2C_DMA_4G_MODE is no longer needed, you can delete it.
> > 
> > Regards,
> > Matthias
> > 
> 
> Sorry for missing that comment, I will remove it.
> Thank you for your comments and reminders.

If you send it real soon, I can still include it for 5.9.

(and please guys, shorten mails to the relevant parts)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index e6b984a..49777a6 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -204,11 +204,11 @@  struct mtk_i2c_compatible {
 	unsigned char dcm: 1;
 	unsigned char auto_restart: 1;
 	unsigned char aux_len_reg: 1;
-	unsigned char support_33bits: 1;
 	unsigned char timing_adjust: 1;
 	unsigned char dma_sync: 1;
 	unsigned char ltiming_adjust: 1;
 	unsigned char apdma_sync: 1;
+	unsigned char max_dma_support;
 };
 
 struct mtk_i2c_ac_timing {
@@ -311,11 +311,11 @@  struct i2c_spec_values {
 	.dcm = 1,
 	.auto_restart = 1,
 	.aux_len_reg = 1,
-	.support_33bits = 1,
 	.timing_adjust = 1,
 	.dma_sync = 0,
 	.ltiming_adjust = 0,
 	.apdma_sync = 0,
+	.max_dma_support = 33,
 };
 
 static const struct mtk_i2c_compatible mt6577_compat = {
@@ -325,11 +325,11 @@  struct i2c_spec_values {
 	.dcm = 1,
 	.auto_restart = 0,
 	.aux_len_reg = 0,
-	.support_33bits = 0,
 	.timing_adjust = 0,
 	.dma_sync = 0,
 	.ltiming_adjust = 0,
 	.apdma_sync = 0,
+	.max_dma_support = 32,
 };
 
 static const struct mtk_i2c_compatible mt6589_compat = {
@@ -339,11 +339,11 @@  struct i2c_spec_values {
 	.dcm = 0,
 	.auto_restart = 0,
 	.aux_len_reg = 0,
-	.support_33bits = 0,
 	.timing_adjust = 0,
 	.dma_sync = 0,
 	.ltiming_adjust = 0,
 	.apdma_sync = 0,
+	.max_dma_support = 32,
 };
 
 static const struct mtk_i2c_compatible mt7622_compat = {
@@ -353,11 +353,11 @@  struct i2c_spec_values {
 	.dcm = 1,
 	.auto_restart = 1,
 	.aux_len_reg = 1,
-	.support_33bits = 0,
 	.timing_adjust = 0,
 	.dma_sync = 0,
 	.ltiming_adjust = 0,
 	.apdma_sync = 0,
+	.max_dma_support = 32,
 };
 
 static const struct mtk_i2c_compatible mt8173_compat = {
@@ -366,11 +366,11 @@  struct i2c_spec_values {
 	.dcm = 1,
 	.auto_restart = 1,
 	.aux_len_reg = 1,
-	.support_33bits = 1,
 	.timing_adjust = 0,
 	.dma_sync = 0,
 	.ltiming_adjust = 0,
 	.apdma_sync = 0,
+	.max_dma_support = 33,
 };
 
 static const struct mtk_i2c_compatible mt8183_compat = {
@@ -380,11 +380,11 @@  struct i2c_spec_values {
 	.dcm = 0,
 	.auto_restart = 1,
 	.aux_len_reg = 1,
-	.support_33bits = 1,
 	.timing_adjust = 1,
 	.dma_sync = 1,
 	.ltiming_adjust = 1,
 	.apdma_sync = 0,
+	.max_dma_support = 33,
 };
 
 static const struct of_device_id mtk_i2c_of_match[] = {
@@ -796,11 +796,6 @@  static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 	return 0;
 }
 
-static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
-{
-	return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
-}
-
 static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 			       int num, int left_num)
 {
@@ -885,8 +880,8 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 			return -ENOMEM;
 		}
 
-		if (i2c->dev_comp->support_33bits) {
-			reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+		if (i2c->dev_comp->max_dma_support > 32) {
+			reg_4g_mode = upper_32_bits(rpaddr);
 			writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
 		}
 
@@ -908,8 +903,8 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 			return -ENOMEM;
 		}
 
-		if (i2c->dev_comp->support_33bits) {
-			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+		if (i2c->dev_comp->max_dma_support > 32) {
+			reg_4g_mode = upper_32_bits(wpaddr);
 			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
 		}
 
@@ -954,11 +949,11 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 			return -ENOMEM;
 		}
 
-		if (i2c->dev_comp->support_33bits) {
-			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+		if (i2c->dev_comp->max_dma_support > 32) {
+			reg_4g_mode = upper_32_bits(wpaddr);
 			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
 
-			reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+			reg_4g_mode = upper_32_bits(rpaddr);
 			writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
 		}
 
@@ -1232,8 +1227,9 @@  static int mtk_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (i2c->dev_comp->support_33bits) {
-		ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
+	if (i2c->dev_comp->max_dma_support > 32) {
+		ret = dma_set_mask(&pdev->dev,
+				DMA_BIT_MASK(i2c->dev_comp->max_dma_support));
 		if (ret) {
 			dev_err(&pdev->dev, "dma_set_mask return error.\n");
 			return ret;