diff mbox series

[v4] secilc/docs: document expandtypeattribute

Message ID 20200802123421.222597-1-dominick.grift@defensec.nl (mailing list archive)
State Superseded
Headers show
Series [v4] secilc/docs: document expandtypeattribute | expand

Commit Message

Dominick Grift Aug. 2, 2020, 12:34 p.m. UTC
This was added for Androids Treble in 2017.

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
---
v2: overriden is overridden
v3: add link to README.md
v4: rephrase and add another example

 secilc/docs/README.md              |  1 +
 secilc/docs/cil_type_statements.md | 44 ++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+)

Comments

James Carter Aug. 3, 2020, 8:56 p.m. UTC | #1
On Sun, Aug 2, 2020 at 8:39 AM Dominick Grift
<dominick.grift@defensec.nl> wrote:
>
> This was added for Androids Treble in 2017.
>
> Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
> ---
> v2: overriden is overridden
> v3: add link to README.md
> v4: rephrase and add another example
>
>  secilc/docs/README.md              |  1 +
>  secilc/docs/cil_type_statements.md | 44 ++++++++++++++++++++++++++++++
>  2 files changed, 45 insertions(+)
>
> diff --git a/secilc/docs/README.md b/secilc/docs/README.md
> index 3f1838e6..efab2a71 100644
> --- a/secilc/docs/README.md
> +++ b/secilc/docs/README.md
> @@ -126,6 +126,7 @@ CIL (Common Intermediate Language)
>    * [typealiasactual](cil_type_statements.md#typealiasactual)
>    * [typeattribute](cil_type_statements.md#typeattribute)
>    * [typeattributeset](cil_type_statements.md#typeattributeset)
> +  * [expandtypeattribute](cil_type_statements.md#expandtypeattribute)
>    * [typebounds](cil_type_statements.md#typebounds)
>    * [typechange](cil_type_statements.md#typechange)
>    * [typemember](cil_type_statements.md#typemember)
> diff --git a/secilc/docs/cil_type_statements.md b/secilc/docs/cil_type_statements.md
> index f9dd3a76..41f0f01a 100644
> --- a/secilc/docs/cil_type_statements.md
> +++ b/secilc/docs/cil_type_statements.md
> @@ -213,6 +213,50 @@ This example is equivalent to `{ domain -kernel.process -ueventd.process -init.p
>          )
>      )
>
> +expandtypeattribute
> +-------------------
> +
> +Overrides the compiler defaults for the expansion of one or more previously declared [`typeattribute`](cil_type_statements.md#typeattribute) identifiers.
> +
> +Note that this statement can be overridden at compile-time with `secilc -X SIZE` and that this functionality is not intended to override `secilc -X SIZE` for individual type attributes!
> +

I didn't mention the "-X" option in my reply to the selinux notebook patch.

This is like what I mentioned in the selinux notebook, but mentions
the "-X" option.

Gives more control over type attribute expansion and removal. When the
value is true, all rules involving the type attribute will be expanded
and the type attribute will be removed from the policy. When the value
is false, the type attribute will not be removed from the policy, even
if the default expand rules or "-X" option cause the rules involving
the type attribute to be expanded.

Thanks,
Jim

> +**Statement definition:**
> +
> +    (expandtypeattribute typeattribute_id true|false)
> +
> +**Where:**
> +
> +<table>
> +<colgroup>
> +<col width="25%" />
> +<col width="75%" />
> +</colgroup>
> +<tbody>
> +<tr class="odd">
> +<td align="left"><p><code>expandtypeattribute</code></p></td>
> +<td align="left"><p>The <code>expandtypeattribute</code> keyword.</p></td>
> +</tr>
> +<tr class="even">
> +<td align="left"><p><code>typeattribute_id</code></p></td>
> +<td align="left"><p>One or more previously declared <code>typeattribute</code> identifiers. Multiple entries consist of a space separated list enclosed in parentheses '()'.</p></td>
> +</tr>
> +<tr class="odd">
> +<td align="left"><p><code>true | false</code></p></td>
> +<td align="left"><p>Either true or false.</p></td>
> +</tr>
> +</tbody>
> +</table>
> +
> +**Examples:**
> +
> +This example uses the expandtypeattribute statement to forcibly expand a previously declared `domain` type attribute.
> +
> +    (expandtypeattribute domain true)
> +
> +This example uses the expandtypeattribute statement to not expand previously declared `file_type` and `port_type` type attributes regardless of compiler defaults.
> +
> +    (expandtypeattribute (file_type port_type) false)
> +
>  typebounds
>  ----------
>
> --
> 2.28.0
>
Dominick Grift Aug. 4, 2020, 7:18 a.m. UTC | #2
James Carter <jwcart2@gmail.com> writes:

> On Sun, Aug 2, 2020 at 8:39 AM Dominick Grift
> <dominick.grift@defensec.nl> wrote:
>>
>> This was added for Androids Treble in 2017.
>>
>> Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
>> ---
>> v2: overriden is overridden
>> v3: add link to README.md
>> v4: rephrase and add another example
>>
>>  secilc/docs/README.md              |  1 +
>>  secilc/docs/cil_type_statements.md | 44 ++++++++++++++++++++++++++++++
>>  2 files changed, 45 insertions(+)
>>
>> diff --git a/secilc/docs/README.md b/secilc/docs/README.md
>> index 3f1838e6..efab2a71 100644
>> --- a/secilc/docs/README.md
>> +++ b/secilc/docs/README.md
>> @@ -126,6 +126,7 @@ CIL (Common Intermediate Language)
>>    * [typealiasactual](cil_type_statements.md#typealiasactual)
>>    * [typeattribute](cil_type_statements.md#typeattribute)
>>    * [typeattributeset](cil_type_statements.md#typeattributeset)
>> +  * [expandtypeattribute](cil_type_statements.md#expandtypeattribute)
>>    * [typebounds](cil_type_statements.md#typebounds)
>>    * [typechange](cil_type_statements.md#typechange)
>>    * [typemember](cil_type_statements.md#typemember)
>> diff --git a/secilc/docs/cil_type_statements.md b/secilc/docs/cil_type_statements.md
>> index f9dd3a76..41f0f01a 100644
>> --- a/secilc/docs/cil_type_statements.md
>> +++ b/secilc/docs/cil_type_statements.md
>> @@ -213,6 +213,50 @@ This example is equivalent to `{ domain -kernel.process -ueventd.process -init.p
>>          )
>>      )
>>
>> +expandtypeattribute
>> +-------------------
>> +
>> +Overrides the compiler defaults for the expansion of one or more previously declared [`typeattribute`](cil_type_statements.md#typeattribute) identifiers.
>> +
>> +Note that this statement can be overridden at compile-time with `secilc -X SIZE` and that this functionality is not intended to override `secilc -X SIZE` for individual type attributes!
>> +

<snip> 
> When the value
> is false, the type attribute will not be removed from the policy, even
> if the default expand rules or "-X" option cause the rules involving
> the type attribute to be expanded.

Yes but I cannot produce that. In my earlier test the type attribute
was expanded regardless of the -X option.

In my test I instructed secilc to expand all attributes with more than 3
members (-X 4), then I added a expandtypeattribute statement telling
secilc to not expand pets and colors.

The result was that it expanded pets and colors anyway.

>
> Thanks,
> Jim
>
>> +**Statement definition:**
>> +
>> +    (expandtypeattribute typeattribute_id true|false)
>> +
>> +**Where:**
>> +
>> +<table>
>> +<colgroup>
>> +<col width="25%" />
>> +<col width="75%" />
>> +</colgroup>
>> +<tbody>
>> +<tr class="odd">
>> +<td align="left"><p><code>expandtypeattribute</code></p></td>
>> +<td align="left"><p>The <code>expandtypeattribute</code> keyword.</p></td>
>> +</tr>
>> +<tr class="even">
>> +<td align="left"><p><code>typeattribute_id</code></p></td>
>> +<td align="left"><p>One or more previously declared
>> <code>typeattribute</code> identifiers. Multiple entries consist of
>> a space separated list enclosed in parentheses '()'.</p></td>
>> +</tr>
>> +<tr class="odd">
>> +<td align="left"><p><code>true | false</code></p></td>
>> +<td align="left"><p>Either true or false.</p></td>
>> +</tr>
>> +</tbody>
>> +</table>
>> +
>> +**Examples:**
>> +
>> +This example uses the expandtypeattribute statement to forcibly expand a previously declared `domain` type attribute.
>> +
>> +    (expandtypeattribute domain true)
>> +
>> +This example uses the expandtypeattribute statement to not expand
>> previously declared `file_type` and `port_type` type attributes
>> regardless of compiler defaults.
>> +
>> +    (expandtypeattribute (file_type port_type) false)
>> +
>>  typebounds
>>  ----------
>>
>> --
>> 2.28.0
>>
James Carter Aug. 4, 2020, 2:45 p.m. UTC | #3
On Tue, Aug 4, 2020 at 3:18 AM Dominick Grift
<dominick.grift@defensec.nl> wrote:
>
> James Carter <jwcart2@gmail.com> writes:
>
> > On Sun, Aug 2, 2020 at 8:39 AM Dominick Grift
> > <dominick.grift@defensec.nl> wrote:
> >>
> >> This was added for Androids Treble in 2017.
> >>
> >> Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
> >> ---
> >> v2: overriden is overridden
> >> v3: add link to README.md
> >> v4: rephrase and add another example
> >>
> >>  secilc/docs/README.md              |  1 +
> >>  secilc/docs/cil_type_statements.md | 44 ++++++++++++++++++++++++++++++
> >>  2 files changed, 45 insertions(+)
> >>
> >> diff --git a/secilc/docs/README.md b/secilc/docs/README.md
> >> index 3f1838e6..efab2a71 100644
> >> --- a/secilc/docs/README.md
> >> +++ b/secilc/docs/README.md
> >> @@ -126,6 +126,7 @@ CIL (Common Intermediate Language)
> >>    * [typealiasactual](cil_type_statements.md#typealiasactual)
> >>    * [typeattribute](cil_type_statements.md#typeattribute)
> >>    * [typeattributeset](cil_type_statements.md#typeattributeset)
> >> +  * [expandtypeattribute](cil_type_statements.md#expandtypeattribute)
> >>    * [typebounds](cil_type_statements.md#typebounds)
> >>    * [typechange](cil_type_statements.md#typechange)
> >>    * [typemember](cil_type_statements.md#typemember)
> >> diff --git a/secilc/docs/cil_type_statements.md b/secilc/docs/cil_type_statements.md
> >> index f9dd3a76..41f0f01a 100644
> >> --- a/secilc/docs/cil_type_statements.md
> >> +++ b/secilc/docs/cil_type_statements.md
> >> @@ -213,6 +213,50 @@ This example is equivalent to `{ domain -kernel.process -ueventd.process -init.p
> >>          )
> >>      )
> >>
> >> +expandtypeattribute
> >> +-------------------
> >> +
> >> +Overrides the compiler defaults for the expansion of one or more previously declared [`typeattribute`](cil_type_statements.md#typeattribute) identifiers.
> >> +
> >> +Note that this statement can be overridden at compile-time with `secilc -X SIZE` and that this functionality is not intended to override `secilc -X SIZE` for individual type attributes!
> >> +
>
> <snip>
> > When the value
> > is false, the type attribute will not be removed from the policy, even
> > if the default expand rules or "-X" option cause the rules involving
> > the type attribute to be expanded.
>
> Yes but I cannot produce that. In my earlier test the type attribute
> was expanded regardless of the -X option.
>
> In my test I instructed secilc to expand all attributes with more than 3
> members (-X 4), then I added a expandtypeattribute statement telling
> secilc to not expand pets and colors.
>
> The result was that it expanded pets and colors anyway.
>

I see the source of your confusion now. "-X 4" means that all
attributes with LESS than 4 types associated with it will be expanded.

Jim

> >
> > Thanks,
> > Jim
> >
> >> +**Statement definition:**
> >> +
> >> +    (expandtypeattribute typeattribute_id true|false)
> >> +
> >> +**Where:**
> >> +
> >> +<table>
> >> +<colgroup>
> >> +<col width="25%" />
> >> +<col width="75%" />
> >> +</colgroup>
> >> +<tbody>
> >> +<tr class="odd">
> >> +<td align="left"><p><code>expandtypeattribute</code></p></td>
> >> +<td align="left"><p>The <code>expandtypeattribute</code> keyword.</p></td>
> >> +</tr>
> >> +<tr class="even">
> >> +<td align="left"><p><code>typeattribute_id</code></p></td>
> >> +<td align="left"><p>One or more previously declared
> >> <code>typeattribute</code> identifiers. Multiple entries consist of
> >> a space separated list enclosed in parentheses '()'.</p></td>
> >> +</tr>
> >> +<tr class="odd">
> >> +<td align="left"><p><code>true | false</code></p></td>
> >> +<td align="left"><p>Either true or false.</p></td>
> >> +</tr>
> >> +</tbody>
> >> +</table>
> >> +
> >> +**Examples:**
> >> +
> >> +This example uses the expandtypeattribute statement to forcibly expand a previously declared `domain` type attribute.
> >> +
> >> +    (expandtypeattribute domain true)
> >> +
> >> +This example uses the expandtypeattribute statement to not expand
> >> previously declared `file_type` and `port_type` type attributes
> >> regardless of compiler defaults.
> >> +
> >> +    (expandtypeattribute (file_type port_type) false)
> >> +
> >>  typebounds
> >>  ----------
> >>
> >> --
> >> 2.28.0
> >>
>
> --
> gpg --locate-keys dominick.grift@defensec.nl
> Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
> https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
> Dominick Grift
Dominick Grift Aug. 4, 2020, 3:48 p.m. UTC | #4
James Carter <jwcart2@gmail.com> writes:

> On Tue, Aug 4, 2020 at 3:18 AM Dominick Grift
> <dominick.grift@defensec.nl> wrote:
>>
>> James Carter <jwcart2@gmail.com> writes:
>>
>> > On Sun, Aug 2, 2020 at 8:39 AM Dominick Grift
>> > <dominick.grift@defensec.nl> wrote:
>> >>
>> >> This was added for Androids Treble in 2017.
>> >>
>> >> Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
>> >> ---
>> >> v2: overriden is overridden
>> >> v3: add link to README.md
>> >> v4: rephrase and add another example
>> >>
>> >>  secilc/docs/README.md              |  1 +
>> >>  secilc/docs/cil_type_statements.md | 44 ++++++++++++++++++++++++++++++
>> >>  2 files changed, 45 insertions(+)
>> >>
>> >> diff --git a/secilc/docs/README.md b/secilc/docs/README.md
>> >> index 3f1838e6..efab2a71 100644
>> >> --- a/secilc/docs/README.md
>> >> +++ b/secilc/docs/README.md
>> >> @@ -126,6 +126,7 @@ CIL (Common Intermediate Language)
>> >>    * [typealiasactual](cil_type_statements.md#typealiasactual)
>> >>    * [typeattribute](cil_type_statements.md#typeattribute)
>> >>    * [typeattributeset](cil_type_statements.md#typeattributeset)
>> >> +  * [expandtypeattribute](cil_type_statements.md#expandtypeattribute)
>> >>    * [typebounds](cil_type_statements.md#typebounds)
>> >>    * [typechange](cil_type_statements.md#typechange)
>> >>    * [typemember](cil_type_statements.md#typemember)
>> >> diff --git a/secilc/docs/cil_type_statements.md b/secilc/docs/cil_type_statements.md
>> >> index f9dd3a76..41f0f01a 100644
>> >> --- a/secilc/docs/cil_type_statements.md
>> >> +++ b/secilc/docs/cil_type_statements.md
>> >> @@ -213,6 +213,50 @@ This example is equivalent to `{ domain -kernel.process -ueventd.process -init.p
>> >>          )
>> >>      )
>> >>
>> >> +expandtypeattribute
>> >> +-------------------
>> >> +
>> >> +Overrides the compiler defaults for the expansion of one or more previously declared [`typeattribute`](cil_type_statements.md#typeattribute) identifiers.
>> >> +
>> >> +Note that this statement can be overridden at compile-time with `secilc -X SIZE` and that this functionality is not intended to override `secilc -X SIZE` for individual type attributes!
>> >> +
>>
>> <snip>
>> > When the value
>> > is false, the type attribute will not be removed from the policy, even
>> > if the default expand rules or "-X" option cause the rules involving
>> > the type attribute to be expanded.
>>
>> Yes but I cannot produce that. In my earlier test the type attribute
>> was expanded regardless of the -X option.
>>
>> In my test I instructed secilc to expand all attributes with more than 3
>> members (-X 4), then I added a expandtypeattribute statement telling
>> secilc to not expand pets and colors.
>>
>> The result was that it expanded pets and colors anyway.
>>
>
> I see the source of your confusion now. "-X 4" means that all
> attributes with LESS than 4 types associated with it will be expanded.

I think its important to clarify this in the documentation. ie:
expandattribute false will not work if you use -X (-X will override the
false statement)

I think that is unintuitive, I would actually want to be able to for
example expand all attributes with less then 4 members except a few
specific ones.

>
> Jim
>
>> >
>> > Thanks,
>> > Jim
>> >
>> >> +**Statement definition:**
>> >> +
>> >> +    (expandtypeattribute typeattribute_id true|false)
>> >> +
>> >> +**Where:**
>> >> +
>> >> +<table>
>> >> +<colgroup>
>> >> +<col width="25%" />
>> >> +<col width="75%" />
>> >> +</colgroup>
>> >> +<tbody>
>> >> +<tr class="odd">
>> >> +<td align="left"><p><code>expandtypeattribute</code></p></td>
>> >> +<td align="left"><p>The <code>expandtypeattribute</code> keyword.</p></td>
>> >> +</tr>
>> >> +<tr class="even">
>> >> +<td align="left"><p><code>typeattribute_id</code></p></td>
>> >> +<td align="left"><p>One or more previously declared
>> >> <code>typeattribute</code> identifiers. Multiple entries consist of
>> >> a space separated list enclosed in parentheses '()'.</p></td>
>> >> +</tr>
>> >> +<tr class="odd">
>> >> +<td align="left"><p><code>true | false</code></p></td>
>> >> +<td align="left"><p>Either true or false.</p></td>
>> >> +</tr>
>> >> +</tbody>
>> >> +</table>
>> >> +
>> >> +**Examples:**
>> >> +
>> >> +This example uses the expandtypeattribute statement to forcibly expand a previously declared `domain` type attribute.
>> >> +
>> >> +    (expandtypeattribute domain true)
>> >> +
>> >> +This example uses the expandtypeattribute statement to not expand
>> >> previously declared `file_type` and `port_type` type attributes
>> >> regardless of compiler defaults.
>> >> +
>> >> +    (expandtypeattribute (file_type port_type) false)
>> >> +
>> >>  typebounds
>> >>  ----------
>> >>
>> >> --
>> >> 2.28.0
>> >>
>>
>> --
>> gpg --locate-keys dominick.grift@defensec.nl
>> Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
>> https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
>> Dominick Grift
James Carter Aug. 4, 2020, 8:23 p.m. UTC | #5
On Tue, Aug 4, 2020 at 11:48 AM Dominick Grift
<dominick.grift@defensec.nl> wrote:
>
> James Carter <jwcart2@gmail.com> writes:
>
> > On Tue, Aug 4, 2020 at 3:18 AM Dominick Grift
> > <dominick.grift@defensec.nl> wrote:
> >>
> >> James Carter <jwcart2@gmail.com> writes:
> >>
> >> > On Sun, Aug 2, 2020 at 8:39 AM Dominick Grift
> >> > <dominick.grift@defensec.nl> wrote:
> >> >>
> >> >> This was added for Androids Treble in 2017.
> >> >>
> >> >> Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
> >> >> ---
> >> >> v2: overriden is overridden
> >> >> v3: add link to README.md
> >> >> v4: rephrase and add another example
> >> >>
> >> >>  secilc/docs/README.md              |  1 +
> >> >>  secilc/docs/cil_type_statements.md | 44 ++++++++++++++++++++++++++++++
> >> >>  2 files changed, 45 insertions(+)
> >> >>
> >> >> diff --git a/secilc/docs/README.md b/secilc/docs/README.md
> >> >> index 3f1838e6..efab2a71 100644
> >> >> --- a/secilc/docs/README.md
> >> >> +++ b/secilc/docs/README.md
> >> >> @@ -126,6 +126,7 @@ CIL (Common Intermediate Language)
> >> >>    * [typealiasactual](cil_type_statements.md#typealiasactual)
> >> >>    * [typeattribute](cil_type_statements.md#typeattribute)
> >> >>    * [typeattributeset](cil_type_statements.md#typeattributeset)
> >> >> +  * [expandtypeattribute](cil_type_statements.md#expandtypeattribute)
> >> >>    * [typebounds](cil_type_statements.md#typebounds)
> >> >>    * [typechange](cil_type_statements.md#typechange)
> >> >>    * [typemember](cil_type_statements.md#typemember)
> >> >> diff --git a/secilc/docs/cil_type_statements.md b/secilc/docs/cil_type_statements.md
> >> >> index f9dd3a76..41f0f01a 100644
> >> >> --- a/secilc/docs/cil_type_statements.md
> >> >> +++ b/secilc/docs/cil_type_statements.md
> >> >> @@ -213,6 +213,50 @@ This example is equivalent to `{ domain -kernel.process -ueventd.process -init.p
> >> >>          )
> >> >>      )
> >> >>
> >> >> +expandtypeattribute
> >> >> +-------------------
> >> >> +
> >> >> +Overrides the compiler defaults for the expansion of one or more previously declared [`typeattribute`](cil_type_statements.md#typeattribute) identifiers.
> >> >> +
> >> >> +Note that this statement can be overridden at compile-time with `secilc -X SIZE` and that this functionality is not intended to override `secilc -X SIZE` for individual type attributes!
> >> >> +
> >>
> >> <snip>
> >> > When the value
> >> > is false, the type attribute will not be removed from the policy, even
> >> > if the default expand rules or "-X" option cause the rules involving
> >> > the type attribute to be expanded.
> >>
> >> Yes but I cannot produce that. In my earlier test the type attribute
> >> was expanded regardless of the -X option.
> >>
> >> In my test I instructed secilc to expand all attributes with more than 3
> >> members (-X 4), then I added a expandtypeattribute statement telling
> >> secilc to not expand pets and colors.
> >>
> >> The result was that it expanded pets and colors anyway.
> >>
> >
> > I see the source of your confusion now. "-X 4" means that all
> > attributes with LESS than 4 types associated with it will be expanded.
>
> I think its important to clarify this in the documentation. ie:
> expandattribute false will not work if you use -X (-X will override the
> false statement)
>
> I think that is unintuitive, I would actually want to be able to for
> example expand all attributes with less then 4 members except a few
> specific ones.
>

It is poorly named at this point. I think it was a victim of multiple
changes over time. A better name now would be removeattribute. That
would be more accurate, because what is really being controlled is
whether the attribute is kept as defined in the policy or not.

I am not sure what advantage there would be to expanding and removing
all except a few selected attributes with less than 4 members, except
for the case when you needed those selected attributes to remain
defined in the policy.  Not much space is going to be saved by not
expanding them. Ok, I guess the advantage would be that the name of
the rule would make more sense. I will grant that.

At any rate, the name stinks, but the functionality is exactly what is
needed. I can trade a large policy for quicker access checks by using
the "-X SIZE" option and I can retain the definitions of the
attributes that need to be defined using expandattribute false.

This whole discussion is why keeping the selinux-notebook in sync with
language changes will be very valuable practice.

Thanks,
Jim

> >
> > Jim
> >
> >> >
> >> > Thanks,
> >> > Jim
> >> >
> >> >> +**Statement definition:**
> >> >> +
> >> >> +    (expandtypeattribute typeattribute_id true|false)
> >> >> +
> >> >> +**Where:**
> >> >> +
> >> >> +<table>
> >> >> +<colgroup>
> >> >> +<col width="25%" />
> >> >> +<col width="75%" />
> >> >> +</colgroup>
> >> >> +<tbody>
> >> >> +<tr class="odd">
> >> >> +<td align="left"><p><code>expandtypeattribute</code></p></td>
> >> >> +<td align="left"><p>The <code>expandtypeattribute</code> keyword.</p></td>
> >> >> +</tr>
> >> >> +<tr class="even">
> >> >> +<td align="left"><p><code>typeattribute_id</code></p></td>
> >> >> +<td align="left"><p>One or more previously declared
> >> >> <code>typeattribute</code> identifiers. Multiple entries consist of
> >> >> a space separated list enclosed in parentheses '()'.</p></td>
> >> >> +</tr>
> >> >> +<tr class="odd">
> >> >> +<td align="left"><p><code>true | false</code></p></td>
> >> >> +<td align="left"><p>Either true or false.</p></td>
> >> >> +</tr>
> >> >> +</tbody>
> >> >> +</table>
> >> >> +
> >> >> +**Examples:**
> >> >> +
> >> >> +This example uses the expandtypeattribute statement to forcibly expand a previously declared `domain` type attribute.
> >> >> +
> >> >> +    (expandtypeattribute domain true)
> >> >> +
> >> >> +This example uses the expandtypeattribute statement to not expand
> >> >> previously declared `file_type` and `port_type` type attributes
> >> >> regardless of compiler defaults.
> >> >> +
> >> >> +    (expandtypeattribute (file_type port_type) false)
> >> >> +
> >> >>  typebounds
> >> >>  ----------
> >> >>
> >> >> --
> >> >> 2.28.0
> >> >>
> >>
> >> --
> >> gpg --locate-keys dominick.grift@defensec.nl
> >> Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
> >> https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
> >> Dominick Grift
>
> --
> gpg --locate-keys dominick.grift@defensec.nl
> Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
> https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
> Dominick Grift
Dominick Grift Aug. 4, 2020, 8:29 p.m. UTC | #6
James Carter <jwcart2@gmail.com> writes:

> On Tue, Aug 4, 2020 at 11:48 AM Dominick Grift
> <dominick.grift@defensec.nl> wrote:
>>
>> James Carter <jwcart2@gmail.com> writes:
>>
>> > On Tue, Aug 4, 2020 at 3:18 AM Dominick Grift
>> > <dominick.grift@defensec.nl> wrote:
>> >>
>> >> James Carter <jwcart2@gmail.com> writes:
>> >>
>> >> > On Sun, Aug 2, 2020 at 8:39 AM Dominick Grift
>> >> > <dominick.grift@defensec.nl> wrote:
>> >> >>
>> >> >> This was added for Androids Treble in 2017.
>> >> >>
>> >> >> Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
>> >> >> ---
>> >> >> v2: overriden is overridden
>> >> >> v3: add link to README.md
>> >> >> v4: rephrase and add another example
>> >> >>
>> >> >>  secilc/docs/README.md              |  1 +
>> >> >>  secilc/docs/cil_type_statements.md | 44 ++++++++++++++++++++++++++++++
>> >> >>  2 files changed, 45 insertions(+)
>> >> >>
>> >> >> diff --git a/secilc/docs/README.md b/secilc/docs/README.md
>> >> >> index 3f1838e6..efab2a71 100644
>> >> >> --- a/secilc/docs/README.md
>> >> >> +++ b/secilc/docs/README.md
>> >> >> @@ -126,6 +126,7 @@ CIL (Common Intermediate Language)
>> >> >>    * [typealiasactual](cil_type_statements.md#typealiasactual)
>> >> >>    * [typeattribute](cil_type_statements.md#typeattribute)
>> >> >>    * [typeattributeset](cil_type_statements.md#typeattributeset)
>> >> >> +  * [expandtypeattribute](cil_type_statements.md#expandtypeattribute)
>> >> >>    * [typebounds](cil_type_statements.md#typebounds)
>> >> >>    * [typechange](cil_type_statements.md#typechange)
>> >> >>    * [typemember](cil_type_statements.md#typemember)
>> >> >> diff --git a/secilc/docs/cil_type_statements.md b/secilc/docs/cil_type_statements.md
>> >> >> index f9dd3a76..41f0f01a 100644
>> >> >> --- a/secilc/docs/cil_type_statements.md
>> >> >> +++ b/secilc/docs/cil_type_statements.md
>> >> >> @@ -213,6 +213,50 @@ This example is equivalent to `{ domain -kernel.process -ueventd.process -init.p
>> >> >>          )
>> >> >>      )
>> >> >>
>> >> >> +expandtypeattribute
>> >> >> +-------------------
>> >> >> +
>> >> >> +Overrides the compiler defaults for the expansion of one or more previously declared [`typeattribute`](cil_type_statements.md#typeattribute) identifiers.
>> >> >> +
>> >> >> +Note that this statement can be overridden at compile-time with `secilc -X SIZE` and that this functionality is not intended to override `secilc -X SIZE` for individual type attributes!
>> >> >> +
>> >>
>> >> <snip>
>> >> > When the value
>> >> > is false, the type attribute will not be removed from the policy, even
>> >> > if the default expand rules or "-X" option cause the rules involving
>> >> > the type attribute to be expanded.
>> >>
>> >> Yes but I cannot produce that. In my earlier test the type attribute
>> >> was expanded regardless of the -X option.
>> >>
>> >> In my test I instructed secilc to expand all attributes with more than 3
>> >> members (-X 4), then I added a expandtypeattribute statement telling
>> >> secilc to not expand pets and colors.
>> >>
>> >> The result was that it expanded pets and colors anyway.
>> >>
>> >
>> > I see the source of your confusion now. "-X 4" means that all
>> > attributes with LESS than 4 types associated with it will be expanded.
>>
>> I think its important to clarify this in the documentation. ie:
>> expandattribute false will not work if you use -X (-X will override the
>> false statement)
>>
>> I think that is unintuitive, I would actually want to be able to for
>> example expand all attributes with less then 4 members except a few
>> specific ones.
>>
>
> It is poorly named at this point. I think it was a victim of multiple
> changes over time. A better name now would be removeattribute. That
> would be more accurate, because what is really being controlled is
> whether the attribute is kept as defined in the policy or not.
>
> I am not sure what advantage there would be to expanding and removing
> all except a few selected attributes with less than 4 members, except
> for the case when you needed those selected attributes to remain
> defined in the policy.  Not much space is going to be saved by not
> expanding them. Ok, I guess the advantage would be that the name of
> the rule would make more sense. I will grant that.
>
> At any rate, the name stinks, but the functionality is exactly what is
> needed. I can trade a large policy for quicker access checks by using
> the "-X SIZE" option and I can retain the definitions of the
> attributes that need to be defined using expandattribute false.
>
> This whole discussion is why keeping the selinux-notebook in sync with
> language changes will be very valuable practice.

I agree and that is why I added the "Note", so that readers have some
reference when they figure out that they cannot override -X for
specified attributes.

If you still do not like this v4 patch then tell me (again) what you
want in there and I will put it in there without argueing so that we can
wrap this up.

>
> Thanks,
> Jim
>
>> >
>> > Jim
>> >
>> >> >
>> >> > Thanks,
>> >> > Jim
>> >> >
>> >> >> +**Statement definition:**
>> >> >> +
>> >> >> +    (expandtypeattribute typeattribute_id true|false)
>> >> >> +
>> >> >> +**Where:**
>> >> >> +
>> >> >> +<table>
>> >> >> +<colgroup>
>> >> >> +<col width="25%" />
>> >> >> +<col width="75%" />
>> >> >> +</colgroup>
>> >> >> +<tbody>
>> >> >> +<tr class="odd">
>> >> >> +<td align="left"><p><code>expandtypeattribute</code></p></td>
>> >> >> +<td align="left"><p>The <code>expandtypeattribute</code> keyword.</p></td>
>> >> >> +</tr>
>> >> >> +<tr class="even">
>> >> >> +<td align="left"><p><code>typeattribute_id</code></p></td>
>> >> >> +<td align="left"><p>One or more previously declared
>> >> >> <code>typeattribute</code> identifiers. Multiple entries consist of
>> >> >> a space separated list enclosed in parentheses '()'.</p></td>
>> >> >> +</tr>
>> >> >> +<tr class="odd">
>> >> >> +<td align="left"><p><code>true | false</code></p></td>
>> >> >> +<td align="left"><p>Either true or false.</p></td>
>> >> >> +</tr>
>> >> >> +</tbody>
>> >> >> +</table>
>> >> >> +
>> >> >> +**Examples:**
>> >> >> +
>> >> >> +This example uses the expandtypeattribute statement to forcibly expand a previously declared `domain` type attribute.
>> >> >> +
>> >> >> +    (expandtypeattribute domain true)
>> >> >> +
>> >> >> +This example uses the expandtypeattribute statement to not expand
>> >> >> previously declared `file_type` and `port_type` type attributes
>> >> >> regardless of compiler defaults.
>> >> >> +
>> >> >> +    (expandtypeattribute (file_type port_type) false)
>> >> >> +
>> >> >>  typebounds
>> >> >>  ----------
>> >> >>
>> >> >> --
>> >> >> 2.28.0
>> >> >>
>> >>
>> >> --
>> >> gpg --locate-keys dominick.grift@defensec.nl
>> >> Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
>> >> https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
>> >> Dominick Grift
>>
>> --
>> gpg --locate-keys dominick.grift@defensec.nl
>> Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
>> https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
>> Dominick Grift
James Carter Aug. 5, 2020, 7:23 p.m. UTC | #7
On Tue, Aug 4, 2020 at 4:29 PM Dominick Grift
<dominick.grift@defensec.nl> wrote:
>
> James Carter <jwcart2@gmail.com> writes:
>
> > On Tue, Aug 4, 2020 at 11:48 AM Dominick Grift
> > <dominick.grift@defensec.nl> wrote:
> >>
> >> James Carter <jwcart2@gmail.com> writes:
> >>
> >> > On Tue, Aug 4, 2020 at 3:18 AM Dominick Grift
> >> > <dominick.grift@defensec.nl> wrote:
> >> >>
> >> >> James Carter <jwcart2@gmail.com> writes:
> >> >>
> >> >> > On Sun, Aug 2, 2020 at 8:39 AM Dominick Grift
> >> >> > <dominick.grift@defensec.nl> wrote:
> >> >> >>
> >> >> >> This was added for Androids Treble in 2017.
> >> >> >>
> >> >> >> Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
> >> >> >> ---
> >> >> >> v2: overriden is overridden
> >> >> >> v3: add link to README.md
> >> >> >> v4: rephrase and add another example
> >> >> >>
> >> >> >>  secilc/docs/README.md              |  1 +
> >> >> >>  secilc/docs/cil_type_statements.md | 44 ++++++++++++++++++++++++++++++
> >> >> >>  2 files changed, 45 insertions(+)
> >> >> >>
> >> >> >> diff --git a/secilc/docs/README.md b/secilc/docs/README.md
> >> >> >> index 3f1838e6..efab2a71 100644
> >> >> >> --- a/secilc/docs/README.md
> >> >> >> +++ b/secilc/docs/README.md
> >> >> >> @@ -126,6 +126,7 @@ CIL (Common Intermediate Language)
> >> >> >>    * [typealiasactual](cil_type_statements.md#typealiasactual)
> >> >> >>    * [typeattribute](cil_type_statements.md#typeattribute)
> >> >> >>    * [typeattributeset](cil_type_statements.md#typeattributeset)
> >> >> >> +  * [expandtypeattribute](cil_type_statements.md#expandtypeattribute)
> >> >> >>    * [typebounds](cil_type_statements.md#typebounds)
> >> >> >>    * [typechange](cil_type_statements.md#typechange)
> >> >> >>    * [typemember](cil_type_statements.md#typemember)
> >> >> >> diff --git a/secilc/docs/cil_type_statements.md b/secilc/docs/cil_type_statements.md
> >> >> >> index f9dd3a76..41f0f01a 100644
> >> >> >> --- a/secilc/docs/cil_type_statements.md
> >> >> >> +++ b/secilc/docs/cil_type_statements.md
> >> >> >> @@ -213,6 +213,50 @@ This example is equivalent to `{ domain -kernel.process -ueventd.process -init.p
> >> >> >>          )
> >> >> >>      )
> >> >> >>
> >> >> >> +expandtypeattribute
> >> >> >> +-------------------
> >> >> >> +
> >> >> >> +Overrides the compiler defaults for the expansion of one or more previously declared [`typeattribute`](cil_type_statements.md#typeattribute) identifiers.
> >> >> >> +
> >> >> >> +Note that this statement can be overridden at compile-time with `secilc -X SIZE` and that this functionality is not intended to override `secilc -X SIZE` for individual type attributes!
> >> >> >> +
> >> >>
> >> >> <snip>
> >> >> > When the value
> >> >> > is false, the type attribute will not be removed from the policy, even
> >> >> > if the default expand rules or "-X" option cause the rules involving
> >> >> > the type attribute to be expanded.
> >> >>
> >> >> Yes but I cannot produce that. In my earlier test the type attribute
> >> >> was expanded regardless of the -X option.
> >> >>
> >> >> In my test I instructed secilc to expand all attributes with more than 3
> >> >> members (-X 4), then I added a expandtypeattribute statement telling
> >> >> secilc to not expand pets and colors.
> >> >>
> >> >> The result was that it expanded pets and colors anyway.
> >> >>
> >> >
> >> > I see the source of your confusion now. "-X 4" means that all
> >> > attributes with LESS than 4 types associated with it will be expanded.
> >>
> >> I think its important to clarify this in the documentation. ie:
> >> expandattribute false will not work if you use -X (-X will override the
> >> false statement)
> >>
> >> I think that is unintuitive, I would actually want to be able to for
> >> example expand all attributes with less then 4 members except a few
> >> specific ones.
> >>
> >
> > It is poorly named at this point. I think it was a victim of multiple
> > changes over time. A better name now would be removeattribute. That
> > would be more accurate, because what is really being controlled is
> > whether the attribute is kept as defined in the policy or not.
> >
> > I am not sure what advantage there would be to expanding and removing
> > all except a few selected attributes with less than 4 members, except
> > for the case when you needed those selected attributes to remain
> > defined in the policy.  Not much space is going to be saved by not
> > expanding them. Ok, I guess the advantage would be that the name of
> > the rule would make more sense. I will grant that.
> >
> > At any rate, the name stinks, but the functionality is exactly what is
> > needed. I can trade a large policy for quicker access checks by using
> > the "-X SIZE" option and I can retain the definitions of the
> > attributes that need to be defined using expandattribute false.
> >
> > This whole discussion is why keeping the selinux-notebook in sync with
> > language changes will be very valuable practice.
>
> I agree and that is why I added the "Note", so that readers have some
> reference when they figure out that they cannot override -X for
> specified attributes.
>
> If you still do not like this v4 patch then tell me (again) what you
> want in there and I will put it in there without argueing so that we can
> wrap this up.
>
I would like this:

Overrides the compiler defaults for the expansion of one or more
previously declared
[`typeattribute`](cil_type_statements.md#typeattribute) identifiers.

This rule gives more control over type attribute expansion and
removal. When the value is true, all rules involving the type
attribute will be expanded and the type attribute will be removed from
the policy. When the value is false, the type attribute will not be
removed from the policy, even if the default expand rules or "-X"
option cause the rules involving the type attribute to be expanded.

Thanks again,
Jim

> >
> > Thanks,
> > Jim
> >
> >> >
> >> > Jim
> >> >
> >> >> >
> >> >> > Thanks,
> >> >> > Jim
> >> >> >
> >> >> >> +**Statement definition:**
> >> >> >> +
> >> >> >> +    (expandtypeattribute typeattribute_id true|false)
> >> >> >> +
> >> >> >> +**Where:**
> >> >> >> +
> >> >> >> +<table>
> >> >> >> +<colgroup>
> >> >> >> +<col width="25%" />
> >> >> >> +<col width="75%" />
> >> >> >> +</colgroup>
> >> >> >> +<tbody>
> >> >> >> +<tr class="odd">
> >> >> >> +<td align="left"><p><code>expandtypeattribute</code></p></td>
> >> >> >> +<td align="left"><p>The <code>expandtypeattribute</code> keyword.</p></td>
> >> >> >> +</tr>
> >> >> >> +<tr class="even">
> >> >> >> +<td align="left"><p><code>typeattribute_id</code></p></td>
> >> >> >> +<td align="left"><p>One or more previously declared
> >> >> >> <code>typeattribute</code> identifiers. Multiple entries consist of
> >> >> >> a space separated list enclosed in parentheses '()'.</p></td>
> >> >> >> +</tr>
> >> >> >> +<tr class="odd">
> >> >> >> +<td align="left"><p><code>true | false</code></p></td>
> >> >> >> +<td align="left"><p>Either true or false.</p></td>
> >> >> >> +</tr>
> >> >> >> +</tbody>
> >> >> >> +</table>
> >> >> >> +
> >> >> >> +**Examples:**
> >> >> >> +
> >> >> >> +This example uses the expandtypeattribute statement to forcibly expand a previously declared `domain` type attribute.
> >> >> >> +
> >> >> >> +    (expandtypeattribute domain true)
> >> >> >> +
> >> >> >> +This example uses the expandtypeattribute statement to not expand
> >> >> >> previously declared `file_type` and `port_type` type attributes
> >> >> >> regardless of compiler defaults.
> >> >> >> +
> >> >> >> +    (expandtypeattribute (file_type port_type) false)
> >> >> >> +
> >> >> >>  typebounds
> >> >> >>  ----------
> >> >> >>
> >> >> >> --
> >> >> >> 2.28.0
> >> >> >>
> >> >>
> >> >> --
> >> >> gpg --locate-keys dominick.grift@defensec.nl
> >> >> Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
> >> >> https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
> >> >> Dominick Grift
> >>
> >> --
> >> gpg --locate-keys dominick.grift@defensec.nl
> >> Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
> >> https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
> >> Dominick Grift
>
> --
> gpg --locate-keys dominick.grift@defensec.nl
> Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
> https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
> Dominick Grift
diff mbox series

Patch

diff --git a/secilc/docs/README.md b/secilc/docs/README.md
index 3f1838e6..efab2a71 100644
--- a/secilc/docs/README.md
+++ b/secilc/docs/README.md
@@ -126,6 +126,7 @@  CIL (Common Intermediate Language)
   * [typealiasactual](cil_type_statements.md#typealiasactual)
   * [typeattribute](cil_type_statements.md#typeattribute)
   * [typeattributeset](cil_type_statements.md#typeattributeset)
+  * [expandtypeattribute](cil_type_statements.md#expandtypeattribute)
   * [typebounds](cil_type_statements.md#typebounds)
   * [typechange](cil_type_statements.md#typechange)
   * [typemember](cil_type_statements.md#typemember)
diff --git a/secilc/docs/cil_type_statements.md b/secilc/docs/cil_type_statements.md
index f9dd3a76..41f0f01a 100644
--- a/secilc/docs/cil_type_statements.md
+++ b/secilc/docs/cil_type_statements.md
@@ -213,6 +213,50 @@  This example is equivalent to `{ domain -kernel.process -ueventd.process -init.p
         )
     )
 
+expandtypeattribute
+-------------------
+
+Overrides the compiler defaults for the expansion of one or more previously declared [`typeattribute`](cil_type_statements.md#typeattribute) identifiers.
+
+Note that this statement can be overridden at compile-time with `secilc -X SIZE` and that this functionality is not intended to override `secilc -X SIZE` for individual type attributes!
+
+**Statement definition:**
+
+    (expandtypeattribute typeattribute_id true|false)
+
+**Where:**
+
+<table>
+<colgroup>
+<col width="25%" />
+<col width="75%" />
+</colgroup>
+<tbody>
+<tr class="odd">
+<td align="left"><p><code>expandtypeattribute</code></p></td>
+<td align="left"><p>The <code>expandtypeattribute</code> keyword.</p></td>
+</tr>
+<tr class="even">
+<td align="left"><p><code>typeattribute_id</code></p></td>
+<td align="left"><p>One or more previously declared <code>typeattribute</code> identifiers. Multiple entries consist of a space separated list enclosed in parentheses '()'.</p></td>
+</tr>
+<tr class="odd">
+<td align="left"><p><code>true | false</code></p></td>
+<td align="left"><p>Either true or false.</p></td>
+</tr>
+</tbody>
+</table>
+
+**Examples:**
+
+This example uses the expandtypeattribute statement to forcibly expand a previously declared `domain` type attribute.
+
+    (expandtypeattribute domain true)
+
+This example uses the expandtypeattribute statement to not expand previously declared `file_type` and `port_type` type attributes regardless of compiler defaults.
+
+    (expandtypeattribute (file_type port_type) false)
+
 typebounds
 ----------