diff mbox series

[v6,1/4] IMA: Add func to measure LSM state and policy

Message ID 20200805004331.20652-2-nramas@linux.microsoft.com (mailing list archive)
State Superseded
Headers show
Series LSM: Measure security module data | expand

Commit Message

Lakshmi Ramasubramanian Aug. 5, 2020, 12:43 a.m. UTC
Critical data structures of security modules need to be measured to
enable an attestation service to verify if the configuration and
policies for the security modules have been setup correctly and
that they haven't been tampered with at runtime. A new IMA policy is
required for handling this measurement.

Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
measure the state and the policy provided by the security modules.
Update ima_match_rules() and ima_validate_rule() to check for
the new func and ima_parse_rule() to handle the new func.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
---
 Documentation/ABI/testing/ima_policy |  9 ++++++++
 security/integrity/ima/ima.h         |  2 ++
 security/integrity/ima/ima_api.c     |  2 +-
 security/integrity/ima/ima_policy.c  | 34 ++++++++++++++++++++++++----
 4 files changed, 42 insertions(+), 5 deletions(-)

Comments

Mimi Zohar Aug. 5, 2020, 3:25 a.m. UTC | #1
Hi Lakshmi,

There's still  a number of other patch sets needing to be reviewed
before my getting to this one.  The comment below is from a high level.

On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
> Critical data structures of security modules need to be measured to
> enable an attestation service to verify if the configuration and
> policies for the security modules have been setup correctly and
> that they haven't been tampered with at runtime. A new IMA policy is
> required for handling this measurement.
> 
> Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
> measure the state and the policy provided by the security modules.
> Update ima_match_rules() and ima_validate_rule() to check for
> the new func and ima_parse_rule() to handle the new func.

I can understand wanting to measure the in kernel LSM memory state to
make sure it hasn't changed, but policies are stored as files.  Buffer
measurements should be limited  to those things that are not files.

Changing how data is passed to the kernel has been happening for a
while.  For example, instead of passing the kernel module or kernel
image in a buffer, the new syscalls - finit_module, kexec_file_load -
pass an open file descriptor.  Similarly, instead of loading the IMA
policy data, a pathname may be provided.

Pre and post security hooks already exist for reading files.   Instead
of adding IMA support for measuring the policy file data, update the
mechanism for loading the LSM policy.  Then not only will you be able
to measure the policy, you'll also be able to require the policy be
signed.

Mimi
Stephen Smalley Aug. 5, 2020, 12:46 p.m. UTC | #2
On 8/4/20 11:25 PM, Mimi Zohar wrote:

> Hi Lakshmi,
>
> There's still  a number of other patch sets needing to be reviewed
> before my getting to this one.  The comment below is from a high level.
>
> On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
>> Critical data structures of security modules need to be measured to
>> enable an attestation service to verify if the configuration and
>> policies for the security modules have been setup correctly and
>> that they haven't been tampered with at runtime. A new IMA policy is
>> required for handling this measurement.
>>
>> Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
>> measure the state and the policy provided by the security modules.
>> Update ima_match_rules() and ima_validate_rule() to check for
>> the new func and ima_parse_rule() to handle the new func.
> I can understand wanting to measure the in kernel LSM memory state to
> make sure it hasn't changed, but policies are stored as files.  Buffer
> measurements should be limited  to those things that are not files.
>
> Changing how data is passed to the kernel has been happening for a
> while.  For example, instead of passing the kernel module or kernel
> image in a buffer, the new syscalls - finit_module, kexec_file_load -
> pass an open file descriptor.  Similarly, instead of loading the IMA
> policy data, a pathname may be provided.
>
> Pre and post security hooks already exist for reading files.   Instead
> of adding IMA support for measuring the policy file data, update the
> mechanism for loading the LSM policy.  Then not only will you be able
> to measure the policy, you'll also be able to require the policy be
> signed.

To clarify, the policy being measured by this patch series is a 
serialized representation of the in-memory policy data structures being 
enforced by SELinux.  Not the file that was loaded.  Hence, this 
measurement would detect tampering with the in-memory policy data 
structures after the policy has been loaded.  In the case of SELinux, 
one can read this serialized representation via /sys/fs/selinux/policy.  
The result is not byte-for-byte identical to the policy file that was 
loaded but can be semantically compared via sediff and other tools to 
determine whether it is equivalent.
Mimi Zohar Aug. 5, 2020, 12:56 p.m. UTC | #3
On Wed, 2020-08-05 at 08:46 -0400, Stephen Smalley wrote:
> On 8/4/20 11:25 PM, Mimi Zohar wrote:
> 
> > Hi Lakshmi,
> > 
> > There's still  a number of other patch sets needing to be reviewed
> > before my getting to this one.  The comment below is from a high level.
> > 
> > On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
> > > Critical data structures of security modules need to be measured to
> > > enable an attestation service to verify if the configuration and
> > > policies for the security modules have been setup correctly and
> > > that they haven't been tampered with at runtime. A new IMA policy is
> > > required for handling this measurement.
> > > 
> > > Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
> > > measure the state and the policy provided by the security modules.
> > > Update ima_match_rules() and ima_validate_rule() to check for
> > > the new func and ima_parse_rule() to handle the new func.
> > I can understand wanting to measure the in kernel LSM memory state to
> > make sure it hasn't changed, but policies are stored as files.  Buffer
> > measurements should be limited  to those things that are not files.
> > 
> > Changing how data is passed to the kernel has been happening for a
> > while.  For example, instead of passing the kernel module or kernel
> > image in a buffer, the new syscalls - finit_module, kexec_file_load -
> > pass an open file descriptor.  Similarly, instead of loading the IMA
> > policy data, a pathname may be provided.
> > 
> > Pre and post security hooks already exist for reading files.   Instead
> > of adding IMA support for measuring the policy file data, update the
> > mechanism for loading the LSM policy.  Then not only will you be able
> > to measure the policy, you'll also be able to require the policy be
> > signed.
> 
> To clarify, the policy being measured by this patch series is a 
> serialized representation of the in-memory policy data structures being 
> enforced by SELinux.  Not the file that was loaded.  Hence, this 
> measurement would detect tampering with the in-memory policy data 
> structures after the policy has been loaded.  In the case of SELinux, 
> one can read this serialized representation via /sys/fs/selinux/policy.  
> The result is not byte-for-byte identical to the policy file that was 
> loaded but can be semantically compared via sediff and other tools to 
> determine whether it is equivalent.

Thank you for the clarification.   Could the policy hash be included
with the other critical data?  Does it really need to be measured
independently?

Mimi
Stephen Smalley Aug. 5, 2020, 1:03 p.m. UTC | #4
On Wed, Aug 5, 2020 at 8:57 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
>
> On Wed, 2020-08-05 at 08:46 -0400, Stephen Smalley wrote:
> > On 8/4/20 11:25 PM, Mimi Zohar wrote:
> >
> > > Hi Lakshmi,
> > >
> > > There's still  a number of other patch sets needing to be reviewed
> > > before my getting to this one.  The comment below is from a high level.
> > >
> > > On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
> > > > Critical data structures of security modules need to be measured to
> > > > enable an attestation service to verify if the configuration and
> > > > policies for the security modules have been setup correctly and
> > > > that they haven't been tampered with at runtime. A new IMA policy is
> > > > required for handling this measurement.
> > > >
> > > > Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
> > > > measure the state and the policy provided by the security modules.
> > > > Update ima_match_rules() and ima_validate_rule() to check for
> > > > the new func and ima_parse_rule() to handle the new func.
> > > I can understand wanting to measure the in kernel LSM memory state to
> > > make sure it hasn't changed, but policies are stored as files.  Buffer
> > > measurements should be limited  to those things that are not files.
> > >
> > > Changing how data is passed to the kernel has been happening for a
> > > while.  For example, instead of passing the kernel module or kernel
> > > image in a buffer, the new syscalls - finit_module, kexec_file_load -
> > > pass an open file descriptor.  Similarly, instead of loading the IMA
> > > policy data, a pathname may be provided.
> > >
> > > Pre and post security hooks already exist for reading files.   Instead
> > > of adding IMA support for measuring the policy file data, update the
> > > mechanism for loading the LSM policy.  Then not only will you be able
> > > to measure the policy, you'll also be able to require the policy be
> > > signed.
> >
> > To clarify, the policy being measured by this patch series is a
> > serialized representation of the in-memory policy data structures being
> > enforced by SELinux.  Not the file that was loaded.  Hence, this
> > measurement would detect tampering with the in-memory policy data
> > structures after the policy has been loaded.  In the case of SELinux,
> > one can read this serialized representation via /sys/fs/selinux/policy.
> > The result is not byte-for-byte identical to the policy file that was
> > loaded but can be semantically compared via sediff and other tools to
> > determine whether it is equivalent.
>
> Thank you for the clarification.   Could the policy hash be included
> with the other critical data?  Does it really need to be measured
> independently?

They were split into two separate functions because we wanted to be
able to support using different templates for them (ima-buf for the
state variables so that the measurement includes the original buffer,
which is small and relatively fixed-size, and ima-ng for the policy
because it is large and we just want to capture the hash for later
comparison against known-good).  Also, the state variables are
available for measurement always from early initialization, whereas
the policy is only available for measurement once we have loaded an
initial policy.
Mimi Zohar Aug. 5, 2020, 1:19 p.m. UTC | #5
On Wed, 2020-08-05 at 09:03 -0400, Stephen Smalley wrote:
> On Wed, Aug 5, 2020 at 8:57 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
> > On Wed, 2020-08-05 at 08:46 -0400, Stephen Smalley wrote:
> > > On 8/4/20 11:25 PM, Mimi Zohar wrote:
> > > 
> > > > Hi Lakshmi,
> > > > 
> > > > There's still  a number of other patch sets needing to be reviewed
> > > > before my getting to this one.  The comment below is from a high level.
> > > > 
> > > > On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
> > > > > Critical data structures of security modules need to be measured to
> > > > > enable an attestation service to verify if the configuration and
> > > > > policies for the security modules have been setup correctly and
> > > > > that they haven't been tampered with at runtime. A new IMA policy is
> > > > > required for handling this measurement.
> > > > > 
> > > > > Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
> > > > > measure the state and the policy provided by the security modules.
> > > > > Update ima_match_rules() and ima_validate_rule() to check for
> > > > > the new func and ima_parse_rule() to handle the new func.
> > > > I can understand wanting to measure the in kernel LSM memory state to
> > > > make sure it hasn't changed, but policies are stored as files.  Buffer
> > > > measurements should be limited  to those things that are not files.
> > > > 
> > > > Changing how data is passed to the kernel has been happening for a
> > > > while.  For example, instead of passing the kernel module or kernel
> > > > image in a buffer, the new syscalls - finit_module, kexec_file_load -
> > > > pass an open file descriptor.  Similarly, instead of loading the IMA
> > > > policy data, a pathname may be provided.
> > > > 
> > > > Pre and post security hooks already exist for reading files.   Instead
> > > > of adding IMA support for measuring the policy file data, update the
> > > > mechanism for loading the LSM policy.  Then not only will you be able
> > > > to measure the policy, you'll also be able to require the policy be
> > > > signed.
> > > 
> > > To clarify, the policy being measured by this patch series is a
> > > serialized representation of the in-memory policy data structures being
> > > enforced by SELinux.  Not the file that was loaded.  Hence, this
> > > measurement would detect tampering with the in-memory policy data
> > > structures after the policy has been loaded.  In the case of SELinux,
> > > one can read this serialized representation via /sys/fs/selinux/policy.
> > > The result is not byte-for-byte identical to the policy file that was
> > > loaded but can be semantically compared via sediff and other tools to
> > > determine whether it is equivalent.
> > 
> > Thank you for the clarification.   Could the policy hash be included
> > with the other critical data?  Does it really need to be measured
> > independently?
> 
> They were split into two separate functions because we wanted to be
> able to support using different templates for them (ima-buf for the
> state variables so that the measurement includes the original buffer,
> which is small and relatively fixed-size, and ima-ng for the policy
> because it is large and we just want to capture the hash for later
> comparison against known-good).  Also, the state variables are
> available for measurement always from early initialization, whereas
> the policy is only available for measurement once we have loaded an
> initial policy.

Ok, measuring the policy separately from other critical data makes
sense.  Instead of measuring the policy, which is large, measure the
policy hash.

Mimi
Stephen Smalley Aug. 5, 2020, 2:27 p.m. UTC | #6
On Wed, Aug 5, 2020 at 9:20 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
>
> On Wed, 2020-08-05 at 09:03 -0400, Stephen Smalley wrote:
> > On Wed, Aug 5, 2020 at 8:57 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
> > > On Wed, 2020-08-05 at 08:46 -0400, Stephen Smalley wrote:
> > > > On 8/4/20 11:25 PM, Mimi Zohar wrote:
> > > >
> > > > > Hi Lakshmi,
> > > > >
> > > > > There's still  a number of other patch sets needing to be reviewed
> > > > > before my getting to this one.  The comment below is from a high level.
> > > > >
> > > > > On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
> > > > > > Critical data structures of security modules need to be measured to
> > > > > > enable an attestation service to verify if the configuration and
> > > > > > policies for the security modules have been setup correctly and
> > > > > > that they haven't been tampered with at runtime. A new IMA policy is
> > > > > > required for handling this measurement.
> > > > > >
> > > > > > Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
> > > > > > measure the state and the policy provided by the security modules.
> > > > > > Update ima_match_rules() and ima_validate_rule() to check for
> > > > > > the new func and ima_parse_rule() to handle the new func.
> > > > > I can understand wanting to measure the in kernel LSM memory state to
> > > > > make sure it hasn't changed, but policies are stored as files.  Buffer
> > > > > measurements should be limited  to those things that are not files.
> > > > >
> > > > > Changing how data is passed to the kernel has been happening for a
> > > > > while.  For example, instead of passing the kernel module or kernel
> > > > > image in a buffer, the new syscalls - finit_module, kexec_file_load -
> > > > > pass an open file descriptor.  Similarly, instead of loading the IMA
> > > > > policy data, a pathname may be provided.
> > > > >
> > > > > Pre and post security hooks already exist for reading files.   Instead
> > > > > of adding IMA support for measuring the policy file data, update the
> > > > > mechanism for loading the LSM policy.  Then not only will you be able
> > > > > to measure the policy, you'll also be able to require the policy be
> > > > > signed.
> > > >
> > > > To clarify, the policy being measured by this patch series is a
> > > > serialized representation of the in-memory policy data structures being
> > > > enforced by SELinux.  Not the file that was loaded.  Hence, this
> > > > measurement would detect tampering with the in-memory policy data
> > > > structures after the policy has been loaded.  In the case of SELinux,
> > > > one can read this serialized representation via /sys/fs/selinux/policy.
> > > > The result is not byte-for-byte identical to the policy file that was
> > > > loaded but can be semantically compared via sediff and other tools to
> > > > determine whether it is equivalent.
> > >
> > > Thank you for the clarification.   Could the policy hash be included
> > > with the other critical data?  Does it really need to be measured
> > > independently?
> >
> > They were split into two separate functions because we wanted to be
> > able to support using different templates for them (ima-buf for the
> > state variables so that the measurement includes the original buffer,
> > which is small and relatively fixed-size, and ima-ng for the policy
> > because it is large and we just want to capture the hash for later
> > comparison against known-good).  Also, the state variables are
> > available for measurement always from early initialization, whereas
> > the policy is only available for measurement once we have loaded an
> > initial policy.
>
> Ok, measuring the policy separately from other critical data makes
> sense.  Instead of measuring the policy, which is large, measure the
> policy hash.

I think that was the original approach.  However, I had concerns with
adding code to SELinux to compute a hash over the policy versus
leaving that to IMA's existing policy and mechanism.  If that's
preferred I guess we can do it that way but seems less flexible and
duplicative.
Tyler Hicks Aug. 5, 2020, 3:07 p.m. UTC | #7
On 2020-08-05 10:27:43, Stephen Smalley wrote:
> On Wed, Aug 5, 2020 at 9:20 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
> >
> > On Wed, 2020-08-05 at 09:03 -0400, Stephen Smalley wrote:
> > > On Wed, Aug 5, 2020 at 8:57 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
> > > > On Wed, 2020-08-05 at 08:46 -0400, Stephen Smalley wrote:
> > > > > On 8/4/20 11:25 PM, Mimi Zohar wrote:
> > > > >
> > > > > > Hi Lakshmi,
> > > > > >
> > > > > > There's still  a number of other patch sets needing to be reviewed
> > > > > > before my getting to this one.  The comment below is from a high level.
> > > > > >
> > > > > > On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
> > > > > > > Critical data structures of security modules need to be measured to
> > > > > > > enable an attestation service to verify if the configuration and
> > > > > > > policies for the security modules have been setup correctly and
> > > > > > > that they haven't been tampered with at runtime. A new IMA policy is
> > > > > > > required for handling this measurement.
> > > > > > >
> > > > > > > Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
> > > > > > > measure the state and the policy provided by the security modules.
> > > > > > > Update ima_match_rules() and ima_validate_rule() to check for
> > > > > > > the new func and ima_parse_rule() to handle the new func.
> > > > > > I can understand wanting to measure the in kernel LSM memory state to
> > > > > > make sure it hasn't changed, but policies are stored as files.  Buffer
> > > > > > measurements should be limited  to those things that are not files.
> > > > > >
> > > > > > Changing how data is passed to the kernel has been happening for a
> > > > > > while.  For example, instead of passing the kernel module or kernel
> > > > > > image in a buffer, the new syscalls - finit_module, kexec_file_load -
> > > > > > pass an open file descriptor.  Similarly, instead of loading the IMA
> > > > > > policy data, a pathname may be provided.
> > > > > >
> > > > > > Pre and post security hooks already exist for reading files.   Instead
> > > > > > of adding IMA support for measuring the policy file data, update the
> > > > > > mechanism for loading the LSM policy.  Then not only will you be able
> > > > > > to measure the policy, you'll also be able to require the policy be
> > > > > > signed.
> > > > >
> > > > > To clarify, the policy being measured by this patch series is a
> > > > > serialized representation of the in-memory policy data structures being
> > > > > enforced by SELinux.  Not the file that was loaded.  Hence, this
> > > > > measurement would detect tampering with the in-memory policy data
> > > > > structures after the policy has been loaded.  In the case of SELinux,
> > > > > one can read this serialized representation via /sys/fs/selinux/policy.
> > > > > The result is not byte-for-byte identical to the policy file that was
> > > > > loaded but can be semantically compared via sediff and other tools to
> > > > > determine whether it is equivalent.
> > > >
> > > > Thank you for the clarification.   Could the policy hash be included
> > > > with the other critical data?  Does it really need to be measured
> > > > independently?
> > >
> > > They were split into two separate functions because we wanted to be
> > > able to support using different templates for them (ima-buf for the
> > > state variables so that the measurement includes the original buffer,
> > > which is small and relatively fixed-size, and ima-ng for the policy
> > > because it is large and we just want to capture the hash for later
> > > comparison against known-good).  Also, the state variables are
> > > available for measurement always from early initialization, whereas
> > > the policy is only available for measurement once we have loaded an
> > > initial policy.
> >
> > Ok, measuring the policy separately from other critical data makes
> > sense.  Instead of measuring the policy, which is large, measure the
> > policy hash.
> 
> I think that was the original approach.  However, I had concerns with
> adding code to SELinux to compute a hash over the policy versus
> leaving that to IMA's existing policy and mechanism.  If that's
> preferred I guess we can do it that way but seems less flexible and
> duplicative.

In AppArmor, we store the sha1 of the raw policy as the policy is
loaded. The hash is exposed to userspace in apparmorfs. See commit
5ac8c355ae00 ("apparmor: allow introspecting the loaded policy pre
internal transform").

It has proved useful as a mechanism for debugging as sometimes the
on-disk policy doesn't match the loaded policy and this can be a good
way to check that while providing support to users. John also mentions
checkpoint/restore in the commit message and I could certainly see how
the policy hashes would be useful in that scenario.

When thinking through how Lakshmi's series could be extended for
AppArmor support, I was thinking that the AppArmor policy measurement
would be a measurement of these hashes that we already have in place.

Perhaps there's some general usefulness in storing/exposing an SELinux
policy hash rather than only seeing it as duplicative property required
this measurement series?

Tyler
Mimi Zohar Aug. 5, 2020, 3:17 p.m. UTC | #8
On Wed, 2020-08-05 at 10:27 -0400, Stephen Smalley wrote:
> On Wed, Aug 5, 2020 at 9:20 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
> > On Wed, 2020-08-05 at 09:03 -0400, Stephen Smalley wrote:
> > > On Wed, Aug 5, 2020 at 8:57 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
> > > > On Wed, 2020-08-05 at 08:46 -0400, Stephen Smalley wrote:
> > > > > On 8/4/20 11:25 PM, Mimi Zohar wrote:
> > > > > 
> > > > > > Hi Lakshmi,
> > > > > > 
> > > > > > There's still  a number of other patch sets needing to be reviewed
> > > > > > before my getting to this one.  The comment below is from a high level.
> > > > > > 
> > > > > > On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
> > > > > > > Critical data structures of security modules need to be measured to
> > > > > > > enable an attestation service to verify if the configuration and
> > > > > > > policies for the security modules have been setup correctly and
> > > > > > > that they haven't been tampered with at runtime. A new IMA policy is
> > > > > > > required for handling this measurement.
> > > > > > > 
> > > > > > > Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
> > > > > > > measure the state and the policy provided by the security modules.
> > > > > > > Update ima_match_rules() and ima_validate_rule() to check for
> > > > > > > the new func and ima_parse_rule() to handle the new func.
> > > > > > I can understand wanting to measure the in kernel LSM memory state to
> > > > > > make sure it hasn't changed, but policies are stored as files.  Buffer
> > > > > > measurements should be limited  to those things that are not files.
> > > > > > 
> > > > > > Changing how data is passed to the kernel has been happening for a
> > > > > > while.  For example, instead of passing the kernel module or kernel
> > > > > > image in a buffer, the new syscalls - finit_module, kexec_file_load -
> > > > > > pass an open file descriptor.  Similarly, instead of loading the IMA
> > > > > > policy data, a pathname may be provided.
> > > > > > 
> > > > > > Pre and post security hooks already exist for reading files.   Instead
> > > > > > of adding IMA support for measuring the policy file data, update the
> > > > > > mechanism for loading the LSM policy.  Then not only will you be able
> > > > > > to measure the policy, you'll also be able to require the policy be
> > > > > > signed.
> > > > > 
> > > > > To clarify, the policy being measured by this patch series is a
> > > > > serialized representation of the in-memory policy data structures being
> > > > > enforced by SELinux.  Not the file that was loaded.  Hence, this
> > > > > measurement would detect tampering with the in-memory policy data
> > > > > structures after the policy has been loaded.  In the case of SELinux,
> > > > > one can read this serialized representation via /sys/fs/selinux/policy.
> > > > > The result is not byte-for-byte identical to the policy file that was
> > > > > loaded but can be semantically compared via sediff and other tools to
> > > > > determine whether it is equivalent.
> > > > 
> > > > Thank you for the clarification.   Could the policy hash be included
> > > > with the other critical data?  Does it really need to be measured
> > > > independently?
> > > 
> > > They were split into two separate functions because we wanted to be
> > > able to support using different templates for them (ima-buf for the
> > > state variables so that the measurement includes the original buffer,
> > > which is small and relatively fixed-size, and ima-ng for the policy
> > > because it is large and we just want to capture the hash for later
> > > comparison against known-good).  Also, the state variables are
> > > available for measurement always from early initialization, whereas
> > > the policy is only available for measurement once we have loaded an
> > > initial policy.
> > 
> > Ok, measuring the policy separately from other critical data makes
> > sense.  Instead of measuring the policy, which is large, measure the
> > policy hash.
> 
> I think that was the original approach.  However, I had concerns with
> adding code to SELinux to compute a hash over the policy versus
> leaving that to IMA's existing policy and mechanism.  If that's
> preferred I guess we can do it that way but seems less flexible and
> duplicative.

Whether IMA or SELinux calculates the in memory policy hash, it should
not impact the original purpose of this patch set - measuring critical
state.  It's unclear whether this patch set needs to be limited to LSM
critical state.

Measuring the in memory policy, if needed, should be a separate patch
set.

Mimi
Stephen Smalley Aug. 5, 2020, 3:43 p.m. UTC | #9
On 8/5/20 11:07 AM, Tyler Hicks wrote:

> On 2020-08-05 10:27:43, Stephen Smalley wrote:
>> On Wed, Aug 5, 2020 at 9:20 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
>>> On Wed, 2020-08-05 at 09:03 -0400, Stephen Smalley wrote:
>>>> On Wed, Aug 5, 2020 at 8:57 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
>>>>> On Wed, 2020-08-05 at 08:46 -0400, Stephen Smalley wrote:
>>>>>> On 8/4/20 11:25 PM, Mimi Zohar wrote:
>>>>>>
>>>>>>> Hi Lakshmi,
>>>>>>>
>>>>>>> There's still  a number of other patch sets needing to be reviewed
>>>>>>> before my getting to this one.  The comment below is from a high level.
>>>>>>>
>>>>>>> On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
>>>>>>>> Critical data structures of security modules need to be measured to
>>>>>>>> enable an attestation service to verify if the configuration and
>>>>>>>> policies for the security modules have been setup correctly and
>>>>>>>> that they haven't been tampered with at runtime. A new IMA policy is
>>>>>>>> required for handling this measurement.
>>>>>>>>
>>>>>>>> Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
>>>>>>>> measure the state and the policy provided by the security modules.
>>>>>>>> Update ima_match_rules() and ima_validate_rule() to check for
>>>>>>>> the new func and ima_parse_rule() to handle the new func.
>>>>>>> I can understand wanting to measure the in kernel LSM memory state to
>>>>>>> make sure it hasn't changed, but policies are stored as files.  Buffer
>>>>>>> measurements should be limited  to those things that are not files.
>>>>>>>
>>>>>>> Changing how data is passed to the kernel has been happening for a
>>>>>>> while.  For example, instead of passing the kernel module or kernel
>>>>>>> image in a buffer, the new syscalls - finit_module, kexec_file_load -
>>>>>>> pass an open file descriptor.  Similarly, instead of loading the IMA
>>>>>>> policy data, a pathname may be provided.
>>>>>>>
>>>>>>> Pre and post security hooks already exist for reading files.   Instead
>>>>>>> of adding IMA support for measuring the policy file data, update the
>>>>>>> mechanism for loading the LSM policy.  Then not only will you be able
>>>>>>> to measure the policy, you'll also be able to require the policy be
>>>>>>> signed.
>>>>>> To clarify, the policy being measured by this patch series is a
>>>>>> serialized representation of the in-memory policy data structures being
>>>>>> enforced by SELinux.  Not the file that was loaded.  Hence, this
>>>>>> measurement would detect tampering with the in-memory policy data
>>>>>> structures after the policy has been loaded.  In the case of SELinux,
>>>>>> one can read this serialized representation via /sys/fs/selinux/policy.
>>>>>> The result is not byte-for-byte identical to the policy file that was
>>>>>> loaded but can be semantically compared via sediff and other tools to
>>>>>> determine whether it is equivalent.
>>>>> Thank you for the clarification.   Could the policy hash be included
>>>>> with the other critical data?  Does it really need to be measured
>>>>> independently?
>>>> They were split into two separate functions because we wanted to be
>>>> able to support using different templates for them (ima-buf for the
>>>> state variables so that the measurement includes the original buffer,
>>>> which is small and relatively fixed-size, and ima-ng for the policy
>>>> because it is large and we just want to capture the hash for later
>>>> comparison against known-good).  Also, the state variables are
>>>> available for measurement always from early initialization, whereas
>>>> the policy is only available for measurement once we have loaded an
>>>> initial policy.
>>> Ok, measuring the policy separately from other critical data makes
>>> sense.  Instead of measuring the policy, which is large, measure the
>>> policy hash.
>> I think that was the original approach.  However, I had concerns with
>> adding code to SELinux to compute a hash over the policy versus
>> leaving that to IMA's existing policy and mechanism.  If that's
>> preferred I guess we can do it that way but seems less flexible and
>> duplicative.
> In AppArmor, we store the sha1 of the raw policy as the policy is
> loaded. The hash is exposed to userspace in apparmorfs. See commit
> 5ac8c355ae00 ("apparmor: allow introspecting the loaded policy pre
> internal transform").
>
> It has proved useful as a mechanism for debugging as sometimes the
> on-disk policy doesn't match the loaded policy and this can be a good
> way to check that while providing support to users. John also mentions
> checkpoint/restore in the commit message and I could certainly see how
> the policy hashes would be useful in that scenario.
>
> When thinking through how Lakshmi's series could be extended for
> AppArmor support, I was thinking that the AppArmor policy measurement
> would be a measurement of these hashes that we already have in place.
>
> Perhaps there's some general usefulness in storing/exposing an SELinux
> policy hash rather than only seeing it as duplicative property required
> this measurement series?

That would be a hash of the policy file that was last loaded via the 
selinuxfs interface for loading policy, not a hash of the in-memory 
policy data structures at the time of measurement (which is what this 
patch series is implementing).  The duplicative part is with respect to 
selecting a hash algorithm and hashing the in-memory policy as part of 
the SELinux code rather than just passing the policy buffer to IMA for 
measurement like any other buffer.  Userspace can already hash the 
in-memory policy data itself by running sha256sum or whatever on 
/sys/fs/selinux/policy, so we don't need to save or expose that separately.
John Johansen Aug. 5, 2020, 4:45 p.m. UTC | #10
On 8/5/20 8:43 AM, Stephen Smalley wrote:
> On 8/5/20 11:07 AM, Tyler Hicks wrote:
> 
>> On 2020-08-05 10:27:43, Stephen Smalley wrote:
>>> On Wed, Aug 5, 2020 at 9:20 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
>>>> On Wed, 2020-08-05 at 09:03 -0400, Stephen Smalley wrote:
>>>>> On Wed, Aug 5, 2020 at 8:57 AM Mimi Zohar <zohar@linux.ibm.com> wrote:
>>>>>> On Wed, 2020-08-05 at 08:46 -0400, Stephen Smalley wrote:
>>>>>>> On 8/4/20 11:25 PM, Mimi Zohar wrote:
>>>>>>>
>>>>>>>> Hi Lakshmi,
>>>>>>>>
>>>>>>>> There's still  a number of other patch sets needing to be reviewed
>>>>>>>> before my getting to this one.  The comment below is from a high level.
>>>>>>>>
>>>>>>>> On Tue, 2020-08-04 at 17:43 -0700, Lakshmi Ramasubramanian wrote:
>>>>>>>>> Critical data structures of security modules need to be measured to
>>>>>>>>> enable an attestation service to verify if the configuration and
>>>>>>>>> policies for the security modules have been setup correctly and
>>>>>>>>> that they haven't been tampered with at runtime. A new IMA policy is
>>>>>>>>> required for handling this measurement.
>>>>>>>>>
>>>>>>>>> Define two new IMA policy func namely LSM_STATE and LSM_POLICY to
>>>>>>>>> measure the state and the policy provided by the security modules.
>>>>>>>>> Update ima_match_rules() and ima_validate_rule() to check for
>>>>>>>>> the new func and ima_parse_rule() to handle the new func.
>>>>>>>> I can understand wanting to measure the in kernel LSM memory state to
>>>>>>>> make sure it hasn't changed, but policies are stored as files.  Buffer
>>>>>>>> measurements should be limited  to those things that are not files.
>>>>>>>>
>>>>>>>> Changing how data is passed to the kernel has been happening for a
>>>>>>>> while.  For example, instead of passing the kernel module or kernel
>>>>>>>> image in a buffer, the new syscalls - finit_module, kexec_file_load -
>>>>>>>> pass an open file descriptor.  Similarly, instead of loading the IMA
>>>>>>>> policy data, a pathname may be provided.
>>>>>>>>
>>>>>>>> Pre and post security hooks already exist for reading files.   Instead
>>>>>>>> of adding IMA support for measuring the policy file data, update the
>>>>>>>> mechanism for loading the LSM policy.  Then not only will you be able
>>>>>>>> to measure the policy, you'll also be able to require the policy be
>>>>>>>> signed.
>>>>>>> To clarify, the policy being measured by this patch series is a
>>>>>>> serialized representation of the in-memory policy data structures being
>>>>>>> enforced by SELinux.  Not the file that was loaded.  Hence, this
>>>>>>> measurement would detect tampering with the in-memory policy data
>>>>>>> structures after the policy has been loaded.  In the case of SELinux,
>>>>>>> one can read this serialized representation via /sys/fs/selinux/policy.
>>>>>>> The result is not byte-for-byte identical to the policy file that was
>>>>>>> loaded but can be semantically compared via sediff and other tools to
>>>>>>> determine whether it is equivalent.
>>>>>> Thank you for the clarification.   Could the policy hash be included
>>>>>> with the other critical data?  Does it really need to be measured
>>>>>> independently?
>>>>> They were split into two separate functions because we wanted to be
>>>>> able to support using different templates for them (ima-buf for the
>>>>> state variables so that the measurement includes the original buffer,
>>>>> which is small and relatively fixed-size, and ima-ng for the policy
>>>>> because it is large and we just want to capture the hash for later
>>>>> comparison against known-good).  Also, the state variables are
>>>>> available for measurement always from early initialization, whereas
>>>>> the policy is only available for measurement once we have loaded an
>>>>> initial policy.
>>>> Ok, measuring the policy separately from other critical data makes
>>>> sense.  Instead of measuring the policy, which is large, measure the
>>>> policy hash.
>>> I think that was the original approach.  However, I had concerns with
>>> adding code to SELinux to compute a hash over the policy versus
>>> leaving that to IMA's existing policy and mechanism.  If that's
>>> preferred I guess we can do it that way but seems less flexible and
>>> duplicative.
>> In AppArmor, we store the sha1 of the raw policy as the policy is
>> loaded. The hash is exposed to userspace in apparmorfs. See commit
>> 5ac8c355ae00 ("apparmor: allow introspecting the loaded policy pre
>> internal transform").
>>
>> It has proved useful as a mechanism for debugging as sometimes the
>> on-disk policy doesn't match the loaded policy and this can be a good
>> way to check that while providing support to users. John also mentions
>> checkpoint/restore in the commit message and I could certainly see how
>> the policy hashes would be useful in that scenario.
>>
>> When thinking through how Lakshmi's series could be extended for
>> AppArmor support, I was thinking that the AppArmor policy measurement
>> would be a measurement of these hashes that we already have in place.
>>
>> Perhaps there's some general usefulness in storing/exposing an SELinux
>> policy hash rather than only seeing it as duplicative property required
>> this measurement series?
> 
> That would be a hash of the policy file that was last loaded via the selinuxfs interface for loading policy, not a hash of the in-memory policy data structures at the time of measurement (which is what this patch series is implementing).  The duplicative part is with respect to selecting a hash algorithm and hashing the in-memory policy as part of the SELinux code rather than just passing the policy buffer to IMA for measurement like any other buffer.  Userspace can already hash the in-memory policy data itself by running sha256sum or whatever on /sys/fs/selinux/policy, so we don't need to save or expose that separately.
> 
> 

yeah apparmor exposes full loaded policy data that userspace could hash independently too, the hashing done by the kernel just reduces the amount of data that userspace has to suck down if they trust the kernel to do the hash. Those hashes are also used by apparmor internally for the first part of a dedup check so exposing them cost very little.

The hashing of the in-memory data structures and variables is something we are not currently doing. If we were to do it hashing in-memory apparmor policy would be quite involved and that would be something I would rather have LSMs export an interface for rather than having IMA poke directly at the data structures (ie. apparmor specific code in apparmor).

As for computing a measurement based on the hash instead of the in-memory policy, while quicker that would not detect memory corruption/attacks that manage to modify policy via writing kernel memory. Whether that type of measurement is sufficient depends on what you are trying to achieve.
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
index cd572912c593..b7c7fb548c0c 100644
--- a/Documentation/ABI/testing/ima_policy
+++ b/Documentation/ABI/testing/ima_policy
@@ -30,6 +30,7 @@  Description:
 				[FIRMWARE_CHECK]
 				[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
 				[KEXEC_CMDLINE] [KEY_CHECK]
+				[LSM_STATE] [LSM_POLICY]
 			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
 			       [[^]MAY_EXEC]
 			fsmagic:= hex value
@@ -125,3 +126,11 @@  Description:
 		keys added to .builtin_trusted_keys or .ima keyring:
 
 			measure func=KEY_CHECK keyrings=.builtin_trusted_keys|.ima
+
+		Example of measure rule using LSM_STATE to measure LSM state:
+
+			measure func=LSM_STATE template=ima-buf
+
+		Example of measure rule using LSM_POLICY to measure LSM policy:
+
+			measure func=LSM_POLICY template=ima-ng
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index 38043074ce5e..1b5f4b2f17d0 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -200,6 +200,8 @@  static inline unsigned int ima_hash_key(u8 *digest)
 	hook(POLICY_CHECK, policy)			\
 	hook(KEXEC_CMDLINE, kexec_cmdline)		\
 	hook(KEY_CHECK, key)				\
+	hook(LSM_STATE, lsm_state)			\
+	hook(LSM_POLICY, lsm_policy)			\
 	hook(MAX_CHECK, none)
 
 #define __ima_hook_enumify(ENUM, str)	ENUM,
diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c
index 4f39fb93f278..8c8b4e4a6493 100644
--- a/security/integrity/ima/ima_api.c
+++ b/security/integrity/ima/ima_api.c
@@ -176,7 +176,7 @@  void ima_add_violation(struct file *file, const unsigned char *filename,
  *		subj=, obj=, type=, func=, mask=, fsmagic=
  *	subj,obj, and type: are LSM specific.
  *	func: FILE_CHECK | BPRM_CHECK | CREDS_CHECK | MMAP_CHECK | MODULE_CHECK
- *	| KEXEC_CMDLINE | KEY_CHECK
+ *	| KEXEC_CMDLINE | KEY_CHECK | LSM_STATE | LSM_POLICY
  *	mask: contains the permission mask
  *	fsmagic: hex value
  *
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index 07f033634b27..e4de581442d5 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -442,13 +442,21 @@  static bool ima_match_rules(struct ima_rule_entry *rule, struct inode *inode,
 {
 	int i;
 
-	if (func == KEY_CHECK) {
-		return (rule->flags & IMA_FUNC) && (rule->func == func) &&
-		       ima_match_keyring(rule, keyring, cred);
-	}
 	if ((rule->flags & IMA_FUNC) &&
 	    (rule->func != func && func != POST_SETATTR))
 		return false;
+
+	switch (func) {
+	case KEY_CHECK:
+		return ((rule->func == func) &&
+			ima_match_keyring(rule, keyring, cred));
+	case LSM_STATE:
+	case LSM_POLICY:
+		return (rule->func == func);
+	default:
+		break;
+	}
+
 	if ((rule->flags & IMA_MASK) &&
 	    (rule->mask != mask && func != POST_SETATTR))
 		return false;
@@ -1044,6 +1052,18 @@  static bool ima_validate_rule(struct ima_rule_entry *entry)
 		if (ima_rule_contains_lsm_cond(entry))
 			return false;
 
+		break;
+	case LSM_STATE:
+	case LSM_POLICY:
+		if (entry->action & ~(MEASURE | DONT_MEASURE))
+			return false;
+
+		if (entry->flags & ~(IMA_FUNC | IMA_PCR))
+			return false;
+
+		if (ima_rule_contains_lsm_cond(entry))
+			return false;
+
 		break;
 	default:
 		return false;
@@ -1176,6 +1196,12 @@  static int ima_parse_rule(char *rule, struct ima_rule_entry *entry)
 				entry->func = KEXEC_CMDLINE;
 			else if (strcmp(args[0].from, "KEY_CHECK") == 0)
 				entry->func = KEY_CHECK;
+			else if (IS_ENABLED(CONFIG_SECURITY_SELINUX) &&
+				 strcmp(args[0].from, "LSM_STATE") == 0)
+				entry->func = LSM_STATE;
+			else if (IS_ENABLED(CONFIG_SECURITY_SELINUX) &&
+				 strcmp(args[0].from, "LSM_POLICY") == 0)
+				entry->func = LSM_POLICY;
 			else
 				result = -EINVAL;
 			if (!result)