diff mbox series

[1/2] usb: dwc3: allocate gadget structure dynamically

Message ID 20200806090717.18657-1-peter.chen@nxp.com (mailing list archive)
State New, archived
Headers show
Series [1/2] usb: dwc3: allocate gadget structure dynamically | expand

Commit Message

Peter Chen Aug. 6, 2020, 9:07 a.m. UTC 
The current code uses commit fac323471df6 ("usb: udc: allow adding
and removing the same gadget device") as the workaround to let
the gadget device is re-used, but it is not allowed from driver
core point. In this commit, we allocate gadget structure dynamically,
and free it at its release function. Since the gadget device's
driver_data has already occupied by usb_composite_dev structure, we have
to use gadget device's platform data to store dwc3 structure.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 drivers/usb/dwc3/core.h   |   2 +-
 drivers/usb/dwc3/ep0.c    |  26 +++++-----
 drivers/usb/dwc3/gadget.c | 102 ++++++++++++++++++++++----------------
 drivers/usb/dwc3/gadget.h |   2 +-
 4 files changed, 74 insertions(+), 58 deletions(-)

Comments

Alan Stern Aug. 6, 2020, 2:54 p.m. UTC | #1 
On Thu, Aug 06, 2020 at 05:07:16PM +0800, Peter Chen wrote:
> The current code uses commit fac323471df6 ("usb: udc: allow adding
> and removing the same gadget device") as the workaround to let
> the gadget device is re-used, but it is not allowed from driver
> core point. In this commit, we allocate gadget structure dynamically,
> and free it at its release function. Since the gadget device's
> driver_data has already occupied by usb_composite_dev structure, we have
> to use gadget device's platform data to store dwc3 structure.
> 
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Signed-off-by: Peter Chen <peter.chen@nxp.com>

There's one problem with this patch...

> @@ -3670,21 +3685,22 @@ int dwc3_gadget_init(struct dwc3 *dwc)
>  
>  	ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps);
>  	if (ret)
> -		goto err3;
> +		goto err4;
>  
> -	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
> +	ret = usb_add_gadget_udc_release(dwc->dev, dwc->gadget, dwc_gadget_release);
>  	if (ret) {
>  		dev_err(dwc->dev, "failed to register udc\n");
> -		goto err4;
> +		goto err5;
>  	}
>  
> -	dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
> +	dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed);
>  
>  	return 0;
>  
> -err4:
> +err5:
>  	dwc3_gadget_free_endpoints(dwc);
> -
> +err4:
> +	kfree(dwc->gadget);

Once you call usb_add_gadget_udc_release() -- even if the call fails --
you must not call kfree() directly.  Instead you have to do
put_device(&dwc->gadget.dev).  That's a little awkward given the code
arrangement here.

One of the advantages of the patch set I posted recently was that it
straightens out this whole situation.  Immediately after allocating
the gadget structure you can call usb_initialize_gadget(), and after
that you call usb_put_gadget() to decrement the refcount -- just like
everything else in the device model.

Perhaps you should rewrite this part of your patch to rely on my work.

Alan Stern
Alan Stern Aug. 6, 2020, 7:18 p.m. UTC | #2 
On Thu, Aug 06, 2020 at 10:54:14AM -0400, Alan Stern wrote:
> On Thu, Aug 06, 2020 at 05:07:16PM +0800, Peter Chen wrote:
> > The current code uses commit fac323471df6 ("usb: udc: allow adding
> > and removing the same gadget device") as the workaround to let
> > the gadget device is re-used, but it is not allowed from driver
> > core point. In this commit, we allocate gadget structure dynamically,
> > and free it at its release function. Since the gadget device's
> > driver_data has already occupied by usb_composite_dev structure, we have
> > to use gadget device's platform data to store dwc3 structure.
> > 
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: Alan Stern <stern@rowland.harvard.edu>
> > Signed-off-by: Peter Chen <peter.chen@nxp.com>
> 
> There's one problem with this patch...
> 
> > @@ -3670,21 +3685,22 @@ int dwc3_gadget_init(struct dwc3 *dwc)
> >  
> >  	ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps);
> >  	if (ret)
> > -		goto err3;
> > +		goto err4;
> >  
> > -	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
> > +	ret = usb_add_gadget_udc_release(dwc->dev, dwc->gadget, dwc_gadget_release);
> >  	if (ret) {
> >  		dev_err(dwc->dev, "failed to register udc\n");
> > -		goto err4;
> > +		goto err5;
> >  	}
> >  
> > -	dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
> > +	dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed);
> >  
> >  	return 0;
> >  
> > -err4:
> > +err5:
> >  	dwc3_gadget_free_endpoints(dwc);
> > -
> > +err4:
> > +	kfree(dwc->gadget);
> 
> Once you call usb_add_gadget_udc_release() -- even if the call fails --
> you must not call kfree() directly.  Instead you have to do
> put_device(&dwc->gadget.dev).  That's a little awkward given the code
> arrangement here.

Sorry, I got that wrong.  If usb_add_gadget_udc_release() succeeds then 
you must call put_device() in order to destroy the gadget.  But if it 
fails then it calls put_device() for you, so that dwc->gadget is a stale 
pointer.  In this case you must not call either kfree() or put_device().

Alan Stern
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 18c7a9907679..48301d950068 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1102,7 +1102,7 @@  struct dwc3 {
 	struct dwc3_event_buffer *ev_buf;
 	struct dwc3_ep		*eps[DWC3_ENDPOINTS_NUM];
 
-	struct usb_gadget	gadget;
+	struct usb_gadget	*gadget;
 	struct usb_gadget_driver *gadget_driver;
 
 	struct clk_bulk_data	*clks;
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 8dd69728add3..1799bd19bf6f 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -131,7 +131,7 @@  static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
 
 		direction = !dwc->ep0_expect_in;
 		dwc->delayed_status = false;
-		usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED);
+		usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED);
 
 		if (dwc->ep0state == EP0_STATUS_PHASE)
 			__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
@@ -325,7 +325,7 @@  static int dwc3_ep0_handle_status(struct dwc3 *dwc,
 		/*
 		 * LTM will be set once we know how to set this in HW.
 		 */
-		usb_status |= dwc->gadget.is_selfpowered;
+		usb_status |= dwc->gadget->is_selfpowered;
 
 		if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
 		    (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
@@ -450,7 +450,7 @@  static int dwc3_ep0_handle_device(struct dwc3 *dwc,
 
 	wValue = le16_to_cpu(ctrl->wValue);
 	wIndex = le16_to_cpu(ctrl->wIndex);
-	state = dwc->gadget.state;
+	state = dwc->gadget->state;
 
 	switch (wValue) {
 	case USB_DEVICE_REMOTE_WAKEUP:
@@ -559,7 +559,7 @@  static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 
 static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
-	enum usb_device_state state = dwc->gadget.state;
+	enum usb_device_state state = dwc->gadget->state;
 	u32 addr;
 	u32 reg;
 
@@ -580,9 +580,9 @@  static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
 
 	if (addr)
-		usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS);
+		usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS);
 	else
-		usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
+		usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT);
 
 	return 0;
 }
@@ -592,14 +592,14 @@  static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 	int ret;
 
 	spin_unlock(&dwc->lock);
-	ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
+	ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
 	spin_lock(&dwc->lock);
 	return ret;
 }
 
 static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
-	enum usb_device_state state = dwc->gadget.state;
+	enum usb_device_state state = dwc->gadget->state;
 	u32 cfg;
 	int ret;
 	u32 reg;
@@ -622,7 +622,7 @@  static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 			 * to change the state on the next usb_ep_queue()
 			 */
 			if (ret == 0)
-				usb_gadget_set_state(&dwc->gadget,
+				usb_gadget_set_state(dwc->gadget,
 						USB_STATE_CONFIGURED);
 
 			/*
@@ -641,7 +641,7 @@  static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 	case USB_STATE_CONFIGURED:
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		if (!cfg && !ret)
-			usb_gadget_set_state(&dwc->gadget,
+			usb_gadget_set_state(dwc->gadget,
 					USB_STATE_ADDRESS);
 		break;
 	default:
@@ -697,7 +697,7 @@  static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
 static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
 	struct dwc3_ep	*dep;
-	enum usb_device_state state = dwc->gadget.state;
+	enum usb_device_state state = dwc->gadget->state;
 	u16		wLength;
 
 	if (state == USB_STATE_DEFAULT)
@@ -741,7 +741,7 @@  static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ct
 	if (wIndex || wLength)
 		return -EINVAL;
 
-	dwc->gadget.isoch_delay = wValue;
+	dwc->gadget->isoch_delay = wValue;
 
 	return 0;
 }
@@ -1102,7 +1102,7 @@  static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 			 */
 			if (!list_empty(&dep->pending_list)) {
 				dwc->delayed_status = false;
-				usb_gadget_set_state(&dwc->gadget,
+				usb_gadget_set_state(dwc->gadget,
 						     USB_STATE_CONFIGURED);
 				dwc3_ep0_do_control_status(dwc, event);
 			}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0b59b2f1cf26..db531390af0f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -290,7 +290,7 @@  int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 	 *
 	 * DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2
 	 */
-	if (dwc->gadget.speed <= USB_SPEED_HIGH) {
+	if (dwc->gadget->speed <= USB_SPEED_HIGH) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 		if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
 			saved_config |= DWC3_GUSB2PHYCFG_SUSPHY;
@@ -422,7 +422,7 @@  static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
 	 */
 	if (dep->direction &&
 	    !DWC3_VER_IS_PRIOR(DWC3, 260A) &&
-	    (dwc->gadget.speed >= USB_SPEED_SUPER))
+	    (dwc->gadget->speed >= USB_SPEED_SUPER))
 		cmd |= DWC3_DEPCMD_CLEARPENDIN;
 
 	memset(&params, 0, sizeof(params));
@@ -562,7 +562,7 @@  static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action)
 		| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
 
 	/* Burst size is only needed in SuperSpeed mode */
-	if (dwc->gadget.speed >= USB_SPEED_SUPER) {
+	if (dwc->gadget->speed >= USB_SPEED_SUPER) {
 		u32 burst = dep->endpoint.maxburst;
 		params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1);
 	}
@@ -947,7 +947,7 @@  static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 		unsigned no_interrupt, unsigned is_last)
 {
 	struct dwc3		*dwc = dep->dwc;
-	struct usb_gadget	*gadget = &dwc->gadget;
+	struct usb_gadget	*gadget = dwc->gadget;
 	enum usb_device_speed	speed = gadget->speed;
 
 	trb->size = DWC3_TRB_SIZE_LENGTH(length);
@@ -1476,7 +1476,7 @@  static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
 	if (!dwc->dis_start_transfer_quirk &&
 	    (DWC3_VER_IS_PRIOR(DWC31, 170A) ||
 	     DWC3_VER_TYPE_IS_WITHIN(DWC31, 170A, EA01, EA06))) {
-		if (dwc->gadget.speed <= USB_SPEED_HIGH && dep->direction)
+		if (dwc->gadget->speed <= USB_SPEED_HIGH && dep->direction)
 			return dwc3_gadget_start_isoc_quirk(dep);
 	}
 
@@ -2160,7 +2160,7 @@  static int dwc3_gadget_start(struct usb_gadget *g,
 	spin_lock_irqsave(&dwc->lock, flags);
 	if (dwc->gadget_driver) {
 		dev_err(dwc->dev, "%s is already bound to %s\n",
-				dwc->gadget.name,
+				dwc->gadget->name,
 				dwc->gadget_driver->driver.name);
 		ret = -EBUSY;
 		goto err1;
@@ -2332,7 +2332,7 @@  static int dwc3_gadget_init_control_endpoint(struct dwc3_ep *dep)
 	dep->endpoint.maxburst = 1;
 	dep->endpoint.ops = &dwc3_gadget_ep0_ops;
 	if (!dep->direction)
-		dwc->gadget.ep0 = &dep->endpoint;
+		dwc->gadget->ep0 = &dep->endpoint;
 
 	dep->endpoint.caps.type_control = true;
 
@@ -2378,7 +2378,7 @@  static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 	dep->endpoint.max_streams = 15;
 	dep->endpoint.ops = &dwc3_gadget_ep_ops;
 	list_add_tail(&dep->endpoint.ep_list,
-			&dwc->gadget.ep_list);
+			&dwc->gadget->ep_list);
 	dep->endpoint.caps.type_iso = true;
 	dep->endpoint.caps.type_bulk = true;
 	dep->endpoint.caps.type_int = true;
@@ -2427,7 +2427,7 @@  static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep)
 	dep->endpoint.max_streams = 15;
 	dep->endpoint.ops = &dwc3_gadget_ep_ops;
 	list_add_tail(&dep->endpoint.ep_list,
-			&dwc->gadget.ep_list);
+			&dwc->gadget->ep_list);
 	dep->endpoint.caps.type_iso = true;
 	dep->endpoint.caps.type_bulk = true;
 	dep->endpoint.caps.type_int = true;
@@ -2488,7 +2488,7 @@  static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total)
 {
 	u8				epnum;
 
-	INIT_LIST_HEAD(&dwc->gadget.ep_list);
+	INIT_LIST_HEAD(&dwc->gadget->ep_list);
 
 	for (epnum = 0; epnum < total; epnum++) {
 		int			ret;
@@ -2924,7 +2924,7 @@  static void dwc3_disconnect_gadget(struct dwc3 *dwc)
 {
 	if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
 		spin_unlock(&dwc->lock);
-		dwc->gadget_driver->disconnect(&dwc->gadget);
+		dwc->gadget_driver->disconnect(dwc->gadget);
 		spin_lock(&dwc->lock);
 	}
 }
@@ -2933,7 +2933,7 @@  static void dwc3_suspend_gadget(struct dwc3 *dwc)
 {
 	if (dwc->gadget_driver && dwc->gadget_driver->suspend) {
 		spin_unlock(&dwc->lock);
-		dwc->gadget_driver->suspend(&dwc->gadget);
+		dwc->gadget_driver->suspend(dwc->gadget);
 		spin_lock(&dwc->lock);
 	}
 }
@@ -2942,7 +2942,7 @@  static void dwc3_resume_gadget(struct dwc3 *dwc)
 {
 	if (dwc->gadget_driver && dwc->gadget_driver->resume) {
 		spin_unlock(&dwc->lock);
-		dwc->gadget_driver->resume(&dwc->gadget);
+		dwc->gadget_driver->resume(dwc->gadget);
 		spin_lock(&dwc->lock);
 	}
 }
@@ -2952,9 +2952,9 @@  static void dwc3_reset_gadget(struct dwc3 *dwc)
 	if (!dwc->gadget_driver)
 		return;
 
-	if (dwc->gadget.speed != USB_SPEED_UNKNOWN) {
+	if (dwc->gadget->speed != USB_SPEED_UNKNOWN) {
 		spin_unlock(&dwc->lock);
-		usb_gadget_udc_reset(&dwc->gadget, dwc->gadget_driver);
+		usb_gadget_udc_reset(dwc->gadget, dwc->gadget_driver);
 		spin_lock(&dwc->lock);
 	}
 }
@@ -3055,9 +3055,9 @@  static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 
 	dwc3_disconnect_gadget(dwc);
 
-	dwc->gadget.speed = USB_SPEED_UNKNOWN;
+	dwc->gadget->speed = USB_SPEED_UNKNOWN;
 	dwc->setup_packet_pending = false;
-	usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED);
+	usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED);
 
 	dwc->connected = false;
 }
@@ -3136,8 +3136,8 @@  static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 	switch (speed) {
 	case DWC3_DSTS_SUPERSPEED_PLUS:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
-		dwc->gadget.ep0->maxpacket = 512;
-		dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
+		dwc->gadget->ep0->maxpacket = 512;
+		dwc->gadget->speed = USB_SPEED_SUPER_PLUS;
 		break;
 	case DWC3_DSTS_SUPERSPEED:
 		/*
@@ -3157,27 +3157,27 @@  static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 			dwc3_gadget_reset_interrupt(dwc);
 
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
-		dwc->gadget.ep0->maxpacket = 512;
-		dwc->gadget.speed = USB_SPEED_SUPER;
+		dwc->gadget->ep0->maxpacket = 512;
+		dwc->gadget->speed = USB_SPEED_SUPER;
 		break;
 	case DWC3_DSTS_HIGHSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
-		dwc->gadget.ep0->maxpacket = 64;
-		dwc->gadget.speed = USB_SPEED_HIGH;
+		dwc->gadget->ep0->maxpacket = 64;
+		dwc->gadget->speed = USB_SPEED_HIGH;
 		break;
 	case DWC3_DSTS_FULLSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
-		dwc->gadget.ep0->maxpacket = 64;
-		dwc->gadget.speed = USB_SPEED_FULL;
+		dwc->gadget->ep0->maxpacket = 64;
+		dwc->gadget->speed = USB_SPEED_FULL;
 		break;
 	case DWC3_DSTS_LOWSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
-		dwc->gadget.ep0->maxpacket = 8;
-		dwc->gadget.speed = USB_SPEED_LOW;
+		dwc->gadget->ep0->maxpacket = 8;
+		dwc->gadget->speed = USB_SPEED_LOW;
 		break;
 	}
 
-	dwc->eps[1]->endpoint.maxpacket = dwc->gadget.ep0->maxpacket;
+	dwc->eps[1]->endpoint.maxpacket = dwc->gadget->ep0->maxpacket;
 
 	/* Enable USB2 LPM Capability */
 
@@ -3245,7 +3245,7 @@  static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
 
 	if (dwc->gadget_driver && dwc->gadget_driver->resume) {
 		spin_unlock(&dwc->lock);
-		dwc->gadget_driver->resume(&dwc->gadget);
+		dwc->gadget_driver->resume(dwc->gadget);
 		spin_lock(&dwc->lock);
 	}
 }
@@ -3416,7 +3416,7 @@  static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 			 * Ignore suspend event until the gadget enters into
 			 * USB_STATE_CONFIGURED state.
 			 */
-			if (dwc->gadget.state >= USB_STATE_CONFIGURED)
+			if (dwc->gadget->state >= USB_STATE_CONFIGURED)
 				dwc3_gadget_suspend_interrupt(dwc,
 						event->event_info);
 		}
@@ -3590,6 +3590,12 @@  static int dwc3_gadget_get_irq(struct dwc3 *dwc)
 out:
 	return irq;
 }
+static void dwc_gadget_release(struct device *dev)
+{
+	struct usb_gadget *gadget = container_of(dev, struct usb_gadget, dev);
+
+	kfree(gadget);
+}
 
 /**
  * dwc3_gadget_init - initializes gadget related registers
@@ -3601,6 +3607,7 @@  int dwc3_gadget_init(struct dwc3 *dwc)
 {
 	int ret;
 	int irq;
+	struct device *dev;
 
 	irq = dwc3_gadget_get_irq(dwc);
 	if (irq < 0) {
@@ -3633,12 +3640,20 @@  int dwc3_gadget_init(struct dwc3 *dwc)
 	}
 
 	init_completion(&dwc->ep0_in_setup);
+	dwc->gadget = kzalloc(sizeof(struct usb_gadget), GFP_KERNEL);
+	if (!dwc->gadget) {
+		ret = -ENOMEM;
+		goto err3;
+	}
+
 
-	dwc->gadget.ops			= &dwc3_gadget_ops;
-	dwc->gadget.speed		= USB_SPEED_UNKNOWN;
-	dwc->gadget.sg_supported	= true;
-	dwc->gadget.name		= "dwc3-gadget";
-	dwc->gadget.lpm_capable		= true;
+	dev				= &dwc->gadget->dev;
+	dev->platform_data		= dwc;
+	dwc->gadget->ops		= &dwc3_gadget_ops;
+	dwc->gadget->speed		= USB_SPEED_UNKNOWN;
+	dwc->gadget->sg_supported	= true;
+	dwc->gadget->name		= "dwc3-gadget";
+	dwc->gadget->lpm_capable	= true;
 
 	/*
 	 * FIXME We might be setting max_speed to <SUPER, however versions
@@ -3661,7 +3676,7 @@  int dwc3_gadget_init(struct dwc3 *dwc)
 		dev_info(dwc->dev, "changing max_speed on rev %08x\n",
 				dwc->revision);
 
-	dwc->gadget.max_speed		= dwc->maximum_speed;
+	dwc->gadget->max_speed		= dwc->maximum_speed;
 
 	/*
 	 * REVISIT: Here we should clear all pending IRQs to be
@@ -3670,21 +3685,22 @@  int dwc3_gadget_init(struct dwc3 *dwc)
 
 	ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps);
 	if (ret)
-		goto err3;
+		goto err4;
 
-	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
+	ret = usb_add_gadget_udc_release(dwc->dev, dwc->gadget, dwc_gadget_release);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register udc\n");
-		goto err4;
+		goto err5;
 	}
 
-	dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
+	dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed);
 
 	return 0;
 
-err4:
+err5:
 	dwc3_gadget_free_endpoints(dwc);
-
+err4:
+	kfree(dwc->gadget);
 err3:
 	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
 			dwc->bounce_addr);
@@ -3704,7 +3720,7 @@  int dwc3_gadget_init(struct dwc3 *dwc)
 
 void dwc3_gadget_exit(struct dwc3 *dwc)
 {
-	usb_del_gadget_udc(&dwc->gadget);
+	usb_del_gadget_udc(dwc->gadget);
 	dwc3_gadget_free_endpoints(dwc);
 	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
 			  dwc->bounce_addr);
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 24dca3872022..b547db228f1e 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -17,7 +17,7 @@ 
 
 struct dwc3;
 #define to_dwc3_ep(ep)		(container_of(ep, struct dwc3_ep, endpoint))
-#define gadget_to_dwc(g)	(container_of(g, struct dwc3, gadget))
+#define gadget_to_dwc(g)	(dev_get_platdata(&g->dev))
 
 /* DEPCFG parameter 1 */
 #define DWC3_DEPCFG_INT_NUM(n)		(((n) & 0x1f) << 0)