| Message ID | 20200806212139.923270-1-cmo@melexis.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio:temperature:mlx90632: Some stylefixing leftovers | expand |
On Thu, 6 Aug 2020 23:21:39 +0200 Crt Mori <cmo@melexis.com> wrote: > There is some inconsistency and whitespace cleanup performed in this > patch. It was done on top of my other patches, but I can rebase to head > of the togreg branch if it would go in sooner. > > Signed-off-by: Crt Mori <cmo@melexis.com> If not already done so, probably just add this to the other series. If you prefer to keep it separate then remind me if I seem to have lost this one after those patches are in place. Thanks, Jonathan > --- > drivers/iio/temperature/mlx90632.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c > index bb35a65bb9f0..d966e5387c48 100644 > --- a/drivers/iio/temperature/mlx90632.c > +++ b/drivers/iio/temperature/mlx90632.c > @@ -100,10 +100,10 @@ > #define MLX90632_DSP_VERSION 5 /* DSP version */ > #define MLX90632_DSP_MASK GENMASK(7, 0) /* DSP version in EE_VERSION */ > #define MLX90632_RESET_CMD 0x0006 /* Reset sensor (address or global) */ > -#define MLX90632_REF_12 12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */ > -#define MLX90632_REF_3 12LL /**< ResCtrlRef value of Channel 3 */ > -#define MLX90632_MAX_MEAS_NUM 31 /**< Maximum measurements in list */ > -#define MLX90632_SLEEP_DELAY_MS 3000 /**< Autosleep delay */ > +#define MLX90632_REF_12 12LL /* ResCtrlRef value of Ch 1 or Ch 2 */ > +#define MLX90632_REF_3 12LL /* ResCtrlRef value of Channel 3 */ > +#define MLX90632_MAX_MEAS_NUM 31 /* Maximum measurements in list */ > +#define MLX90632_SLEEP_DELAY_MS 3000 /* Autosleep delay */ > #define MLX90632_EXTENDED_LIMIT 27000 /* Extended mode raw value limit */ > > struct mlx90632_data { > @@ -884,7 +884,7 @@ static int mlx90632_probe(struct i2c_client *client, > mlx90632->mtyp = MLX90632_MTYP_EXTENDED; > } else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) { > dev_dbg(&client->dev, > - "Detected Unknown EEPROM calibration %x\n", read); > + "Detected Unknown EEPROM calibration %x\n", read); > } else { > dev_err(&client->dev, > "Wrong DSP version %x (expected %x)\n",
diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c index bb35a65bb9f0..d966e5387c48 100644 --- a/drivers/iio/temperature/mlx90632.c +++ b/drivers/iio/temperature/mlx90632.c @@ -100,10 +100,10 @@ #define MLX90632_DSP_VERSION 5 /* DSP version */ #define MLX90632_DSP_MASK GENMASK(7, 0) /* DSP version in EE_VERSION */ #define MLX90632_RESET_CMD 0x0006 /* Reset sensor (address or global) */ -#define MLX90632_REF_12 12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */ -#define MLX90632_REF_3 12LL /**< ResCtrlRef value of Channel 3 */ -#define MLX90632_MAX_MEAS_NUM 31 /**< Maximum measurements in list */ -#define MLX90632_SLEEP_DELAY_MS 3000 /**< Autosleep delay */ +#define MLX90632_REF_12 12LL /* ResCtrlRef value of Ch 1 or Ch 2 */ +#define MLX90632_REF_3 12LL /* ResCtrlRef value of Channel 3 */ +#define MLX90632_MAX_MEAS_NUM 31 /* Maximum measurements in list */ +#define MLX90632_SLEEP_DELAY_MS 3000 /* Autosleep delay */ #define MLX90632_EXTENDED_LIMIT 27000 /* Extended mode raw value limit */ struct mlx90632_data { @@ -884,7 +884,7 @@ static int mlx90632_probe(struct i2c_client *client, mlx90632->mtyp = MLX90632_MTYP_EXTENDED; } else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) { dev_dbg(&client->dev, - "Detected Unknown EEPROM calibration %x\n", read); + "Detected Unknown EEPROM calibration %x\n", read); } else { dev_err(&client->dev, "Wrong DSP version %x (expected %x)\n",
There is some inconsistency and whitespace cleanup performed in this patch. It was done on top of my other patches, but I can rebase to head of the togreg branch if it would go in sooner. Signed-off-by: Crt Mori <cmo@melexis.com> --- drivers/iio/temperature/mlx90632.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)