| Message ID | 20200811094447.31208-3-roger.pau@citrix.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On 11.08.20 11:44, Roger Pau Monne wrote: > To be used in order to create foreign mappings. This is based on the > ZONE_DEVICE facility which is used by persistent memory devices in > order to create struct pages and kernel virtual mappings for the IOMEM > areas of such devices. Note that on kernels without support for > ZONE_DEVICE Xen will fallback to use ballooned pages in order to > create foreign mappings. > > The newly added helpers use the same parameters as the existing > {alloc/free}_xenballooned_pages functions, which allows for in-place > replacement of the callers. Once a memory region has been added to be > used as scratch mapping space it will no longer be released, and pages > returned are kept in a linked list. This allows to have a buffer of > pages and prevents resorting to frequent additions and removals of > regions. > > If enabled (because ZONE_DEVICE is supported) the usage of the new > functionality untangles Xen balloon and RAM hotplug from the usage of > unpopulated physical memory ranges to map foreign pages, which is the > correct thing to do in order to avoid mappings of foreign pages depend > on memory hotplug. > > Note the driver is currently not enabled on Arm platforms because it > would interfere with the identity mapping required on some platforms. > > Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> > --- > Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> > Cc: David Airlie <airlied@linux.ie> > Cc: Daniel Vetter <daniel@ffwll.ch> > Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> > Cc: Juergen Gross <jgross@suse.com> > Cc: Stefano Stabellini <sstabellini@kernel.org> > Cc: Dan Carpenter <dan.carpenter@oracle.com> > Cc: Roger Pau Monne <roger.pau@citrix.com> > Cc: Wei Liu <wl@xen.org> > Cc: Yan Yankovskyi <yyankovskyi@gmail.com> > Cc: dri-devel@lists.freedesktop.org > Cc: xen-devel@lists.xenproject.org > Cc: linux-mm@kvack.org > Cc: David Hildenbrand <david@redhat.com> > Cc: Michal Hocko <mhocko@kernel.org> > Cc: Dan Williams <dan.j.williams@intel.com> > --- > Changes since v3: > - Introduce a Kconfig option that gates the addition of the > unpopulated alloc driver. This allows to easily disable it on Arm > platforms. > - Dropped Juergen RB due to the addition of the Kconfig option. > - Switched from MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC. > > Changes since v2: > - Drop BUILD_BUG_ON regarding PVMMU page sizes. > - Use a SPDX license identifier. > - Call fill with only the minimum required number of pages. > - Include xen.h header in xen_drm_front_gem.c. > - Use less generic function names. > - Exit early from the init function if not a PV guest. > - Don't use all caps for region name. > --- > drivers/gpu/drm/xen/xen_drm_front_gem.c | 9 +- > drivers/xen/Kconfig | 4 + > drivers/xen/Makefile | 1 + > drivers/xen/balloon.c | 4 +- > drivers/xen/grant-table.c | 4 +- > drivers/xen/privcmd.c | 4 +- > drivers/xen/unpopulated-alloc.c | 185 ++++++++++++++++++++++++ > drivers/xen/xenbus/xenbus_client.c | 6 +- > drivers/xen/xlate_mmu.c | 4 +- > include/xen/xen.h | 9 ++ > 10 files changed, 215 insertions(+), 15 deletions(-) > create mode 100644 drivers/xen/unpopulated-alloc.c > > diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig > index 1d339ef92422..018020b91baa 100644 > --- a/drivers/xen/Kconfig > +++ b/drivers/xen/Kconfig > @@ -327,4 +327,8 @@ config XEN_HAVE_VPMU > config XEN_FRONT_PGDIR_SHBUF > tristate > > +config XEN_UNPOPULATED_ALLOC > + bool > + default y if ZONE_DEVICE && !ARM && !ARM64 There is a current effort to enable Xen on RISC-V. Do we expect this option to be usable for this architecture? If yes, I'm fine with the exclusion of Arm, otherwise I'd opt for defaulting to yes only for X86. Either way you can have my: Reviewed-by: Juergen Gross <jgross@suse.com> Juergen
On Wed, Aug 12, 2020 at 09:28:45AM +0200, Jürgen Groß wrote: > On 11.08.20 11:44, Roger Pau Monne wrote: > > To be used in order to create foreign mappings. This is based on the > > ZONE_DEVICE facility which is used by persistent memory devices in > > order to create struct pages and kernel virtual mappings for the IOMEM > > areas of such devices. Note that on kernels without support for > > ZONE_DEVICE Xen will fallback to use ballooned pages in order to > > create foreign mappings. > > > > The newly added helpers use the same parameters as the existing > > {alloc/free}_xenballooned_pages functions, which allows for in-place > > replacement of the callers. Once a memory region has been added to be > > used as scratch mapping space it will no longer be released, and pages > > returned are kept in a linked list. This allows to have a buffer of > > pages and prevents resorting to frequent additions and removals of > > regions. > > > > If enabled (because ZONE_DEVICE is supported) the usage of the new > > functionality untangles Xen balloon and RAM hotplug from the usage of > > unpopulated physical memory ranges to map foreign pages, which is the > > correct thing to do in order to avoid mappings of foreign pages depend > > on memory hotplug. > > > > Note the driver is currently not enabled on Arm platforms because it > > would interfere with the identity mapping required on some platforms. > > > > Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> > > --- > > Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> > > Cc: David Airlie <airlied@linux.ie> > > Cc: Daniel Vetter <daniel@ffwll.ch> > > Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> > > Cc: Juergen Gross <jgross@suse.com> > > Cc: Stefano Stabellini <sstabellini@kernel.org> > > Cc: Dan Carpenter <dan.carpenter@oracle.com> > > Cc: Roger Pau Monne <roger.pau@citrix.com> > > Cc: Wei Liu <wl@xen.org> > > Cc: Yan Yankovskyi <yyankovskyi@gmail.com> > > Cc: dri-devel@lists.freedesktop.org > > Cc: xen-devel@lists.xenproject.org > > Cc: linux-mm@kvack.org > > Cc: David Hildenbrand <david@redhat.com> > > Cc: Michal Hocko <mhocko@kernel.org> > > Cc: Dan Williams <dan.j.williams@intel.com> > > --- > > Changes since v3: > > - Introduce a Kconfig option that gates the addition of the > > unpopulated alloc driver. This allows to easily disable it on Arm > > platforms. > > - Dropped Juergen RB due to the addition of the Kconfig option. > > - Switched from MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC. > > > > Changes since v2: > > - Drop BUILD_BUG_ON regarding PVMMU page sizes. > > - Use a SPDX license identifier. > > - Call fill with only the minimum required number of pages. > > - Include xen.h header in xen_drm_front_gem.c. > > - Use less generic function names. > > - Exit early from the init function if not a PV guest. > > - Don't use all caps for region name. > > --- > > drivers/gpu/drm/xen/xen_drm_front_gem.c | 9 +- > > drivers/xen/Kconfig | 4 + > > drivers/xen/Makefile | 1 + > > drivers/xen/balloon.c | 4 +- > > drivers/xen/grant-table.c | 4 +- > > drivers/xen/privcmd.c | 4 +- > > drivers/xen/unpopulated-alloc.c | 185 ++++++++++++++++++++++++ > > drivers/xen/xenbus/xenbus_client.c | 6 +- > > drivers/xen/xlate_mmu.c | 4 +- > > include/xen/xen.h | 9 ++ > > 10 files changed, 215 insertions(+), 15 deletions(-) > > create mode 100644 drivers/xen/unpopulated-alloc.c > > > > diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig > > index 1d339ef92422..018020b91baa 100644 > > --- a/drivers/xen/Kconfig > > +++ b/drivers/xen/Kconfig > > @@ -327,4 +327,8 @@ config XEN_HAVE_VPMU > > config XEN_FRONT_PGDIR_SHBUF > > tristate > > +config XEN_UNPOPULATED_ALLOC > > + bool > > + default y if ZONE_DEVICE && !ARM && !ARM64 > > There is a current effort to enable Xen on RISC-V. Do we expect this > option to be usable for this architecture? It will depend on whether the Xen RISC-V implementation mandates an IOMMU, for example Arm doesn't and hence uses an identity p2m for dom0. If RISC-V does the same then I would assume this won't be suitable as-is (not that it couldn't be made to work). IMO it wasn't clear from the community call what was the RISC-V port position regarding this, but IIRC the IOMMU spec for RISC-V was behind the virtualization one, so it's likely that quite a lot of hardware will have hardware virtualization support but no IOMMU, in which case I think it's likely the RISC-V port will follow Arm and implement an identity p2m. > If yes, I'm fine with the > exclusion of Arm, otherwise I'd opt for defaulting to yes only for > X86. > > Either way you can have my: > > Reviewed-by: Juergen Gross <jgross@suse.com> Thanks. Feel free to change the 'ZONE_DEVICE && !ARM && !ARM64' to 'ZONE_DEVICE && X86' if you think it's safer. Roger.
On Thu, Aug 13, 2020 at 08:33:37AM +0100, Christoph Hellwig wrote: > On Tue, Aug 11, 2020 at 11:44:47AM +0200, Roger Pau Monne wrote: > > If enabled (because ZONE_DEVICE is supported) the usage of the new > > functionality untangles Xen balloon and RAM hotplug from the usage of > > unpopulated physical memory ranges to map foreign pages, which is the > > correct thing to do in order to avoid mappings of foreign pages depend > > on memory hotplug. > > So please just select ZONE_DEVICE if this is so much better rather > than maintaining two variants. We still need to other variant for Arm at least, so both need to be maintained anyway, even if we force ZONE_DEVICE on x86. Thanks, Roger.
On Thu, Aug 13, 2020 at 09:54:20AM +0200, Roger Pau Monné wrote: > On Thu, Aug 13, 2020 at 08:33:37AM +0100, Christoph Hellwig wrote: > > On Tue, Aug 11, 2020 at 11:44:47AM +0200, Roger Pau Monne wrote: > > > If enabled (because ZONE_DEVICE is supported) the usage of the new > > > functionality untangles Xen balloon and RAM hotplug from the usage of > > > unpopulated physical memory ranges to map foreign pages, which is the > > > correct thing to do in order to avoid mappings of foreign pages depend > > > on memory hotplug. > > > > So please just select ZONE_DEVICE if this is so much better rather > > than maintaining two variants. > > We still need to other variant for Arm at least, so both need to be > maintained anyway, even if we force ZONE_DEVICE on x86. Why does arm not have ZONE_DEVICE? -Daniel
Your email client seems to set 'Reply-to:' to point to everyone on the 'Cc:' field, but not yourself, which is kind of weird. I've manually fixed it on this reply by moving everyone to the 'Cc:' field and setting you on 'To:'. On Thu, Aug 13, 2020 at 11:49:46AM +0200, Daniel Vetter wrote: > On Thu, Aug 13, 2020 at 09:54:20AM +0200, Roger Pau Monné wrote: > > On Thu, Aug 13, 2020 at 08:33:37AM +0100, Christoph Hellwig wrote: > > > On Tue, Aug 11, 2020 at 11:44:47AM +0200, Roger Pau Monne wrote: > > > > If enabled (because ZONE_DEVICE is supported) the usage of the new > > > > functionality untangles Xen balloon and RAM hotplug from the usage of > > > > unpopulated physical memory ranges to map foreign pages, which is the > > > > correct thing to do in order to avoid mappings of foreign pages depend > > > > on memory hotplug. > > > > > > So please just select ZONE_DEVICE if this is so much better rather > > > than maintaining two variants. > > > > We still need to other variant for Arm at least, so both need to be > > maintained anyway, even if we force ZONE_DEVICE on x86. > > Why does arm not have ZONE_DEVICE? It's not that Arm doesn't have ZONE_DEVICE, it's just that the approach used here won't work correctly on an Arm Xen dom0 as-is. This is due to the usage of an identity second stage translation in order to workaround the lack of an IOMMU in some Arm boards. It can be made to work on Arm, but will likely require someone from the Arm side doing that. Roger.
On Fri, Aug 14, 2020 at 08:29:20AM +0100, Christoph Hellwig wrote: > On Thu, Aug 13, 2020 at 09:54:20AM +0200, Roger Pau Monn?? wrote: > > On Thu, Aug 13, 2020 at 08:33:37AM +0100, Christoph Hellwig wrote: > > > On Tue, Aug 11, 2020 at 11:44:47AM +0200, Roger Pau Monne wrote: > > > > If enabled (because ZONE_DEVICE is supported) the usage of the new > > > > functionality untangles Xen balloon and RAM hotplug from the usage of > > > > unpopulated physical memory ranges to map foreign pages, which is the > > > > correct thing to do in order to avoid mappings of foreign pages depend > > > > on memory hotplug. > > > > > > So please just select ZONE_DEVICE if this is so much better rather > > > than maintaining two variants. > > > > We still need to other variant for Arm at least, so both need to be > > maintained anyway, even if we force ZONE_DEVICE on x86. > > Well, it still really helps reproducability if you stick to one > implementation of x86. > > The alternative would be an explicit config option to opt into it, > but just getting a different implementation based on a random > kernel option is strange. Would adding something like the chunk below to the patch be OK? ---8<--- diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 018020b91baa..5f321a1319e6 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -328,7 +328,14 @@ config XEN_FRONT_PGDIR_SHBUF tristate config XEN_UNPOPULATED_ALLOC - bool - default y if ZONE_DEVICE && !ARM && !ARM64 + bool "Use unpopulated memory ranges for guest mappings" + depends on X86 + select ZONE_DEVICE + default y + help + Use unpopulated memory ranges in order to create mappings for guest + memory regions, including grants maps and foreign pages. This avoids + having to balloon out RAM regions in order to obtain physical memory + space to create such mappings. endmenu
On 14.08.20 11:56, Roger Pau Monné wrote: > On Fri, Aug 14, 2020 at 08:29:20AM +0100, Christoph Hellwig wrote: >> On Thu, Aug 13, 2020 at 09:54:20AM +0200, Roger Pau Monn?? wrote: >>> On Thu, Aug 13, 2020 at 08:33:37AM +0100, Christoph Hellwig wrote: >>>> On Tue, Aug 11, 2020 at 11:44:47AM +0200, Roger Pau Monne wrote: >>>>> If enabled (because ZONE_DEVICE is supported) the usage of the new >>>>> functionality untangles Xen balloon and RAM hotplug from the usage of >>>>> unpopulated physical memory ranges to map foreign pages, which is the >>>>> correct thing to do in order to avoid mappings of foreign pages depend >>>>> on memory hotplug. >>>> >>>> So please just select ZONE_DEVICE if this is so much better rather >>>> than maintaining two variants. >>> >>> We still need to other variant for Arm at least, so both need to be >>> maintained anyway, even if we force ZONE_DEVICE on x86. >> >> Well, it still really helps reproducability if you stick to one >> implementation of x86. >> >> The alternative would be an explicit config option to opt into it, >> but just getting a different implementation based on a random >> kernel option is strange. > > Would adding something like the chunk below to the patch be OK? > > ---8<--- > diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig > index 018020b91baa..5f321a1319e6 100644 > --- a/drivers/xen/Kconfig > +++ b/drivers/xen/Kconfig > @@ -328,7 +328,14 @@ config XEN_FRONT_PGDIR_SHBUF > tristate > > config XEN_UNPOPULATED_ALLOC > - bool > - default y if ZONE_DEVICE && !ARM && !ARM64 > + bool "Use unpopulated memory ranges for guest mappings" > + depends on X86 > + select ZONE_DEVICE > + default y I'd rather use "default XEN_BACKEND" here, as mappings of other guest's memory is rarely used for non-backend guests. Juergen
On Fri, Aug 14, 2020 at 12:27:32PM +0200, Jürgen Groß wrote: > On 14.08.20 11:56, Roger Pau Monné wrote: > > On Fri, Aug 14, 2020 at 08:29:20AM +0100, Christoph Hellwig wrote: > > > On Thu, Aug 13, 2020 at 09:54:20AM +0200, Roger Pau Monn?? wrote: > > > > On Thu, Aug 13, 2020 at 08:33:37AM +0100, Christoph Hellwig wrote: > > > > > On Tue, Aug 11, 2020 at 11:44:47AM +0200, Roger Pau Monne wrote: > > > > > > If enabled (because ZONE_DEVICE is supported) the usage of the new > > > > > > functionality untangles Xen balloon and RAM hotplug from the usage of > > > > > > unpopulated physical memory ranges to map foreign pages, which is the > > > > > > correct thing to do in order to avoid mappings of foreign pages depend > > > > > > on memory hotplug. > > > > > > > > > > So please just select ZONE_DEVICE if this is so much better rather > > > > > than maintaining two variants. > > > > > > > > We still need to other variant for Arm at least, so both need to be > > > > maintained anyway, even if we force ZONE_DEVICE on x86. > > > > > > Well, it still really helps reproducability if you stick to one > > > implementation of x86. > > > > > > The alternative would be an explicit config option to opt into it, > > > but just getting a different implementation based on a random > > > kernel option is strange. > > > > Would adding something like the chunk below to the patch be OK? > > > > ---8<--- > > diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig > > index 018020b91baa..5f321a1319e6 100644 > > --- a/drivers/xen/Kconfig > > +++ b/drivers/xen/Kconfig > > @@ -328,7 +328,14 @@ config XEN_FRONT_PGDIR_SHBUF > > tristate > > config XEN_UNPOPULATED_ALLOC > > - bool > > - default y if ZONE_DEVICE && !ARM && !ARM64 > > + bool "Use unpopulated memory ranges for guest mappings" > > + depends on X86 > > + select ZONE_DEVICE > > + default y > > I'd rather use "default XEN_BACKEND" here, as mappings of other guest's > memory is rarely used for non-backend guests. There's also the privcmd and gnt devices which make heavy use of this, so I'm not sure only selecting by default on XEN_BACKEND is the best option. Thanks, Roger.
On 14.08.20 14:47, Roger Pau Monné wrote: > On Fri, Aug 14, 2020 at 12:27:32PM +0200, Jürgen Groß wrote: >> On 14.08.20 11:56, Roger Pau Monné wrote: >>> On Fri, Aug 14, 2020 at 08:29:20AM +0100, Christoph Hellwig wrote: >>>> On Thu, Aug 13, 2020 at 09:54:20AM +0200, Roger Pau Monn?? wrote: >>>>> On Thu, Aug 13, 2020 at 08:33:37AM +0100, Christoph Hellwig wrote: >>>>>> On Tue, Aug 11, 2020 at 11:44:47AM +0200, Roger Pau Monne wrote: >>>>>>> If enabled (because ZONE_DEVICE is supported) the usage of the new >>>>>>> functionality untangles Xen balloon and RAM hotplug from the usage of >>>>>>> unpopulated physical memory ranges to map foreign pages, which is the >>>>>>> correct thing to do in order to avoid mappings of foreign pages depend >>>>>>> on memory hotplug. >>>>>> >>>>>> So please just select ZONE_DEVICE if this is so much better rather >>>>>> than maintaining two variants. >>>>> >>>>> We still need to other variant for Arm at least, so both need to be >>>>> maintained anyway, even if we force ZONE_DEVICE on x86. >>>> >>>> Well, it still really helps reproducability if you stick to one >>>> implementation of x86. >>>> >>>> The alternative would be an explicit config option to opt into it, >>>> but just getting a different implementation based on a random >>>> kernel option is strange. >>> >>> Would adding something like the chunk below to the patch be OK? >>> >>> ---8<--- >>> diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig >>> index 018020b91baa..5f321a1319e6 100644 >>> --- a/drivers/xen/Kconfig >>> +++ b/drivers/xen/Kconfig >>> @@ -328,7 +328,14 @@ config XEN_FRONT_PGDIR_SHBUF >>> tristate >>> config XEN_UNPOPULATED_ALLOC >>> - bool >>> - default y if ZONE_DEVICE && !ARM && !ARM64 >>> + bool "Use unpopulated memory ranges for guest mappings" >>> + depends on X86 >>> + select ZONE_DEVICE >>> + default y >> >> I'd rather use "default XEN_BACKEND" here, as mappings of other guest's >> memory is rarely used for non-backend guests. > > There's also the privcmd and gnt devices which make heavy use of this, > so I'm not sure only selecting by default on XEN_BACKEND is the best > option. I just want to avoid that kernels built for running as Xen guest, but not as dom0, will be forced to select ZONE_DEVICE. As privcmd is dom0-only, this is no problem. In case you are worrying about gnt devices, I'd be fine to switch to default XEN_BACKEND || XEN_GNTDEV Juergen
On Fri, Aug 14, 2020 at 02:54:38PM +0200, Jürgen Groß wrote: > On 14.08.20 14:47, Roger Pau Monné wrote: > > On Fri, Aug 14, 2020 at 12:27:32PM +0200, Jürgen Groß wrote: > > > On 14.08.20 11:56, Roger Pau Monné wrote: > > > > On Fri, Aug 14, 2020 at 08:29:20AM +0100, Christoph Hellwig wrote: > > > > > On Thu, Aug 13, 2020 at 09:54:20AM +0200, Roger Pau Monn?? wrote: > > > > > > On Thu, Aug 13, 2020 at 08:33:37AM +0100, Christoph Hellwig wrote: > > > > > > > On Tue, Aug 11, 2020 at 11:44:47AM +0200, Roger Pau Monne wrote: > > > > > > > > If enabled (because ZONE_DEVICE is supported) the usage of the new > > > > > > > > functionality untangles Xen balloon and RAM hotplug from the usage of > > > > > > > > unpopulated physical memory ranges to map foreign pages, which is the > > > > > > > > correct thing to do in order to avoid mappings of foreign pages depend > > > > > > > > on memory hotplug. > > > > > > > > > > > > > > So please just select ZONE_DEVICE if this is so much better rather > > > > > > > than maintaining two variants. > > > > > > > > > > > > We still need to other variant for Arm at least, so both need to be > > > > > > maintained anyway, even if we force ZONE_DEVICE on x86. > > > > > > > > > > Well, it still really helps reproducability if you stick to one > > > > > implementation of x86. > > > > > > > > > > The alternative would be an explicit config option to opt into it, > > > > > but just getting a different implementation based on a random > > > > > kernel option is strange. > > > > > > > > Would adding something like the chunk below to the patch be OK? > > > > > > > > ---8<--- > > > > diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig > > > > index 018020b91baa..5f321a1319e6 100644 > > > > --- a/drivers/xen/Kconfig > > > > +++ b/drivers/xen/Kconfig > > > > @@ -328,7 +328,14 @@ config XEN_FRONT_PGDIR_SHBUF > > > > tristate > > > > config XEN_UNPOPULATED_ALLOC > > > > - bool > > > > - default y if ZONE_DEVICE && !ARM && !ARM64 > > > > + bool "Use unpopulated memory ranges for guest mappings" > > > > + depends on X86 > > > > + select ZONE_DEVICE > > > > + default y > > > > > > I'd rather use "default XEN_BACKEND" here, as mappings of other guest's > > > memory is rarely used for non-backend guests. > > > > There's also the privcmd and gnt devices which make heavy use of this, > > so I'm not sure only selecting by default on XEN_BACKEND is the best > > option. > > I just want to avoid that kernels built for running as Xen guest, but > not as dom0, will be forced to select ZONE_DEVICE. > > As privcmd is dom0-only, this is no problem. Oh, didn't know that, I somehow assumed privcmd would be available to all Xen guests regardless of whether dom0 support was selected. > In case you are worrying about gnt devices, I'd be fine to switch to > > default XEN_BACKEND || XEN_GNTDEV Sure. maybe even: default XEN_BACKEND || XEN_GNTDEV || XEN_DOM0 Do you want me to resend with this changed or are you happy to fixup if there are no further comments? Thanks, Roger.
On 14.08.20 15:35, Roger Pau Monné wrote: > On Fri, Aug 14, 2020 at 02:54:38PM +0200, Jürgen Groß wrote: >> On 14.08.20 14:47, Roger Pau Monné wrote: >>> On Fri, Aug 14, 2020 at 12:27:32PM +0200, Jürgen Groß wrote: >>>> On 14.08.20 11:56, Roger Pau Monné wrote: >>>>> On Fri, Aug 14, 2020 at 08:29:20AM +0100, Christoph Hellwig wrote: >>>>>> On Thu, Aug 13, 2020 at 09:54:20AM +0200, Roger Pau Monn?? wrote: >>>>>>> On Thu, Aug 13, 2020 at 08:33:37AM +0100, Christoph Hellwig wrote: >>>>>>>> On Tue, Aug 11, 2020 at 11:44:47AM +0200, Roger Pau Monne wrote: >>>>>>>>> If enabled (because ZONE_DEVICE is supported) the usage of the new >>>>>>>>> functionality untangles Xen balloon and RAM hotplug from the usage of >>>>>>>>> unpopulated physical memory ranges to map foreign pages, which is the >>>>>>>>> correct thing to do in order to avoid mappings of foreign pages depend >>>>>>>>> on memory hotplug. >>>>>>>> >>>>>>>> So please just select ZONE_DEVICE if this is so much better rather >>>>>>>> than maintaining two variants. >>>>>>> >>>>>>> We still need to other variant for Arm at least, so both need to be >>>>>>> maintained anyway, even if we force ZONE_DEVICE on x86. >>>>>> >>>>>> Well, it still really helps reproducability if you stick to one >>>>>> implementation of x86. >>>>>> >>>>>> The alternative would be an explicit config option to opt into it, >>>>>> but just getting a different implementation based on a random >>>>>> kernel option is strange. >>>>> >>>>> Would adding something like the chunk below to the patch be OK? >>>>> >>>>> ---8<--- >>>>> diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig >>>>> index 018020b91baa..5f321a1319e6 100644 >>>>> --- a/drivers/xen/Kconfig >>>>> +++ b/drivers/xen/Kconfig >>>>> @@ -328,7 +328,14 @@ config XEN_FRONT_PGDIR_SHBUF >>>>> tristate >>>>> config XEN_UNPOPULATED_ALLOC >>>>> - bool >>>>> - default y if ZONE_DEVICE && !ARM && !ARM64 >>>>> + bool "Use unpopulated memory ranges for guest mappings" >>>>> + depends on X86 >>>>> + select ZONE_DEVICE >>>>> + default y >>>> >>>> I'd rather use "default XEN_BACKEND" here, as mappings of other guest's >>>> memory is rarely used for non-backend guests. >>> >>> There's also the privcmd and gnt devices which make heavy use of this, >>> so I'm not sure only selecting by default on XEN_BACKEND is the best >>> option. >> >> I just want to avoid that kernels built for running as Xen guest, but >> not as dom0, will be forced to select ZONE_DEVICE. >> >> As privcmd is dom0-only, this is no problem. > > Oh, didn't know that, I somehow assumed privcmd would be available to > all Xen guests regardless of whether dom0 support was selected. My remark above should have been more precise in this regard: privcmd operations dealing with foreign mappings are normally limited to dom0 (there might be special cases, like linux-based stubdoms, but those will be configured carefully for that purpose, so they don't need to be considered for selecting the default IMO). > >> In case you are worrying about gnt devices, I'd be fine to switch to >> >> default XEN_BACKEND || XEN_GNTDEV > > Sure. maybe even: > > default XEN_BACKEND || XEN_GNTDEV || XEN_DOM0 Yes. > > Do you want me to resend with this changed or are you happy to fixup > if there are no further comments? I'd prefer a resend (maybe after Patch 1 has gained its missing Ack, and then with Patch 1 sent to me, too). Juergen
diff --git a/drivers/gpu/drm/xen/xen_drm_front_gem.c b/drivers/gpu/drm/xen/xen_drm_front_gem.c index f0b85e094111..270e1bd3e4da 100644 --- a/drivers/gpu/drm/xen/xen_drm_front_gem.c +++ b/drivers/gpu/drm/xen/xen_drm_front_gem.c @@ -18,6 +18,7 @@ #include <drm/drm_probe_helper.h> #include <xen/balloon.h> +#include <xen/xen.h> #include "xen_drm_front.h" #include "xen_drm_front_gem.h" @@ -99,8 +100,8 @@ static struct xen_gem_object *gem_create(struct drm_device *dev, size_t size) * allocate ballooned pages which will be used to map * grant references provided by the backend */ - ret = alloc_xenballooned_pages(xen_obj->num_pages, - xen_obj->pages); + ret = xen_alloc_unpopulated_pages(xen_obj->num_pages, + xen_obj->pages); if (ret < 0) { DRM_ERROR("Cannot allocate %zu ballooned pages: %d\n", xen_obj->num_pages, ret); @@ -152,8 +153,8 @@ void xen_drm_front_gem_free_object_unlocked(struct drm_gem_object *gem_obj) } else { if (xen_obj->pages) { if (xen_obj->be_alloc) { - free_xenballooned_pages(xen_obj->num_pages, - xen_obj->pages); + xen_free_unpopulated_pages(xen_obj->num_pages, + xen_obj->pages); gem_free_pages_array(xen_obj); } else { drm_gem_put_pages(&xen_obj->base, diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 1d339ef92422..018020b91baa 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -327,4 +327,8 @@ config XEN_HAVE_VPMU config XEN_FRONT_PGDIR_SHBUF tristate +config XEN_UNPOPULATED_ALLOC + bool + default y if ZONE_DEVICE && !ARM && !ARM64 + endmenu diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index c25c9a699b48..babdca808861 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -41,3 +41,4 @@ xen-gntdev-$(CONFIG_XEN_GNTDEV_DMABUF) += gntdev-dmabuf.o xen-gntalloc-y := gntalloc.o xen-privcmd-y := privcmd.o privcmd-buf.o obj-$(CONFIG_XEN_FRONT_PGDIR_SHBUF) += xen-front-pgdir-shbuf.o +obj-$(CONFIG_XEN_UNPOPULATED_ALLOC) += unpopulated-alloc.o diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 37ffccda8bb8..51427c752b37 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -653,7 +653,7 @@ void free_xenballooned_pages(int nr_pages, struct page **pages) } EXPORT_SYMBOL(free_xenballooned_pages); -#ifdef CONFIG_XEN_PV +#if defined(CONFIG_XEN_PV) && !defined(CONFIG_XEN_UNPOPULATED_ALLOC) static void __init balloon_add_region(unsigned long start_pfn, unsigned long pages) { @@ -707,7 +707,7 @@ static int __init balloon_init(void) register_sysctl_table(xen_root); #endif -#ifdef CONFIG_XEN_PV +#if defined(CONFIG_XEN_PV) && !defined(CONFIG_XEN_UNPOPULATED_ALLOC) { int i; diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 8d06bf1cc347..523dcdf39cc9 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -801,7 +801,7 @@ int gnttab_alloc_pages(int nr_pages, struct page **pages) { int ret; - ret = alloc_xenballooned_pages(nr_pages, pages); + ret = xen_alloc_unpopulated_pages(nr_pages, pages); if (ret < 0) return ret; @@ -836,7 +836,7 @@ EXPORT_SYMBOL_GPL(gnttab_pages_clear_private); void gnttab_free_pages(int nr_pages, struct page **pages) { gnttab_pages_clear_private(nr_pages, pages); - free_xenballooned_pages(nr_pages, pages); + xen_free_unpopulated_pages(nr_pages, pages); } EXPORT_SYMBOL_GPL(gnttab_free_pages); diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 63abe6c3642b..b0c73c58f987 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -424,7 +424,7 @@ static int alloc_empty_pages(struct vm_area_struct *vma, int numpgs) if (pages == NULL) return -ENOMEM; - rc = alloc_xenballooned_pages(numpgs, pages); + rc = xen_alloc_unpopulated_pages(numpgs, pages); if (rc != 0) { pr_warn("%s Could not alloc %d pfns rc:%d\n", __func__, numpgs, rc); @@ -895,7 +895,7 @@ static void privcmd_close(struct vm_area_struct *vma) rc = xen_unmap_domain_gfn_range(vma, numgfns, pages); if (rc == 0) - free_xenballooned_pages(numpgs, pages); + xen_free_unpopulated_pages(numpgs, pages); else pr_crit("unable to unmap MFN range: leaking %d pages. rc=%d\n", numpgs, rc); diff --git a/drivers/xen/unpopulated-alloc.c b/drivers/xen/unpopulated-alloc.c new file mode 100644 index 000000000000..1b5d157c6977 --- /dev/null +++ b/drivers/xen/unpopulated-alloc.c @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/errno.h> +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/memremap.h> +#include <linux/slab.h> + +#include <asm/page.h> + +#include <xen/page.h> +#include <xen/xen.h> + +static DEFINE_MUTEX(list_lock); +static LIST_HEAD(page_list); +static unsigned int list_count; + +static int fill_list(unsigned int nr_pages) +{ + struct dev_pagemap *pgmap; + void *vaddr; + unsigned int i, alloc_pages = round_up(nr_pages, PAGES_PER_SECTION); + int nid, ret; + + pgmap = kzalloc(sizeof(*pgmap), GFP_KERNEL); + if (!pgmap) + return -ENOMEM; + + pgmap->type = MEMORY_DEVICE_GENERIC; + pgmap->res.name = "Xen scratch"; + pgmap->res.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + + ret = allocate_resource(&iomem_resource, &pgmap->res, + alloc_pages * PAGE_SIZE, 0, -1, + PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); + if (ret < 0) { + pr_err("Cannot allocate new IOMEM resource\n"); + kfree(pgmap); + return ret; + } + + nid = memory_add_physaddr_to_nid(pgmap->res.start); + +#ifdef CONFIG_XEN_HAVE_PVMMU + /* + * memremap will build page tables for the new memory so + * the p2m must contain invalid entries so the correct + * non-present PTEs will be written. + * + * If a failure occurs, the original (identity) p2m entries + * are not restored since this region is now known not to + * conflict with any devices. + */ + if (!xen_feature(XENFEAT_auto_translated_physmap)) { + xen_pfn_t pfn = PFN_DOWN(pgmap->res.start); + + for (i = 0; i < alloc_pages; i++) { + if (!set_phys_to_machine(pfn + i, INVALID_P2M_ENTRY)) { + pr_warn("set_phys_to_machine() failed, no memory added\n"); + release_resource(&pgmap->res); + kfree(pgmap); + return -ENOMEM; + } + } + } +#endif + + vaddr = memremap_pages(pgmap, nid); + if (IS_ERR(vaddr)) { + pr_err("Cannot remap memory range\n"); + release_resource(&pgmap->res); + kfree(pgmap); + return PTR_ERR(vaddr); + } + + for (i = 0; i < alloc_pages; i++) { + struct page *pg = virt_to_page(vaddr + PAGE_SIZE * i); + + BUG_ON(!virt_addr_valid(vaddr + PAGE_SIZE * i)); + list_add(&pg->lru, &page_list); + list_count++; + } + + return 0; +} + +/** + * xen_alloc_unpopulated_pages - alloc unpopulated pages + * @nr_pages: Number of pages + * @pages: pages returned + * @return 0 on success, error otherwise + */ +int xen_alloc_unpopulated_pages(unsigned int nr_pages, struct page **pages) +{ + unsigned int i; + int ret = 0; + + mutex_lock(&list_lock); + if (list_count < nr_pages) { + ret = fill_list(nr_pages - list_count); + if (ret) + goto out; + } + + for (i = 0; i < nr_pages; i++) { + struct page *pg = list_first_entry_or_null(&page_list, + struct page, + lru); + + BUG_ON(!pg); + list_del(&pg->lru); + list_count--; + pages[i] = pg; + +#ifdef CONFIG_XEN_HAVE_PVMMU + if (!xen_feature(XENFEAT_auto_translated_physmap)) { + ret = xen_alloc_p2m_entry(page_to_pfn(pg)); + if (ret < 0) { + unsigned int j; + + for (j = 0; j <= i; j++) { + list_add(&pages[j]->lru, &page_list); + list_count++; + } + goto out; + } + } +#endif + } + +out: + mutex_unlock(&list_lock); + return ret; +} +EXPORT_SYMBOL(xen_alloc_unpopulated_pages); + +/** + * xen_free_unpopulated_pages - return unpopulated pages + * @nr_pages: Number of pages + * @pages: pages to return + */ +void xen_free_unpopulated_pages(unsigned int nr_pages, struct page **pages) +{ + unsigned int i; + + mutex_lock(&list_lock); + for (i = 0; i < nr_pages; i++) { + list_add(&pages[i]->lru, &page_list); + list_count++; + } + mutex_unlock(&list_lock); +} +EXPORT_SYMBOL(xen_free_unpopulated_pages); + +#ifdef CONFIG_XEN_PV +static int __init init(void) +{ + unsigned int i; + + if (!xen_domain()) + return -ENODEV; + + if (!xen_pv_domain()) + return 0; + + /* + * Initialize with pages from the extra memory regions (see + * arch/x86/xen/setup.c). + */ + for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) { + unsigned int j; + + for (j = 0; j < xen_extra_mem[i].n_pfns; j++) { + struct page *pg = + pfn_to_page(xen_extra_mem[i].start_pfn + j); + + list_add(&pg->lru, &page_list); + list_count++; + } + } + + return 0; +} +subsys_initcall(init); +#endif diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c index 786fbb7d8be0..70b6c4780fbd 100644 --- a/drivers/xen/xenbus/xenbus_client.c +++ b/drivers/xen/xenbus/xenbus_client.c @@ -615,7 +615,7 @@ static int xenbus_map_ring_hvm(struct xenbus_device *dev, bool leaked = false; unsigned int nr_pages = XENBUS_PAGES(nr_grefs); - err = alloc_xenballooned_pages(nr_pages, node->hvm.pages); + err = xen_alloc_unpopulated_pages(nr_pages, node->hvm.pages); if (err) goto out_err; @@ -656,7 +656,7 @@ static int xenbus_map_ring_hvm(struct xenbus_device *dev, addr, nr_pages); out_free_ballooned_pages: if (!leaked) - free_xenballooned_pages(nr_pages, node->hvm.pages); + xen_free_unpopulated_pages(nr_pages, node->hvm.pages); out_err: return err; } @@ -852,7 +852,7 @@ static int xenbus_unmap_ring_hvm(struct xenbus_device *dev, void *vaddr) info.addrs); if (!rv) { vunmap(vaddr); - free_xenballooned_pages(nr_pages, node->hvm.pages); + xen_free_unpopulated_pages(nr_pages, node->hvm.pages); } else WARN(1, "Leaking %p, size %u page(s)\n", vaddr, nr_pages); diff --git a/drivers/xen/xlate_mmu.c b/drivers/xen/xlate_mmu.c index 7b1077f0abcb..34742c6e189e 100644 --- a/drivers/xen/xlate_mmu.c +++ b/drivers/xen/xlate_mmu.c @@ -232,7 +232,7 @@ int __init xen_xlate_map_ballooned_pages(xen_pfn_t **gfns, void **virt, kfree(pages); return -ENOMEM; } - rc = alloc_xenballooned_pages(nr_pages, pages); + rc = xen_alloc_unpopulated_pages(nr_pages, pages); if (rc) { pr_warn("%s Couldn't balloon alloc %ld pages rc:%d\n", __func__, nr_pages, rc); @@ -249,7 +249,7 @@ int __init xen_xlate_map_ballooned_pages(xen_pfn_t **gfns, void **virt, if (!vaddr) { pr_warn("%s Couldn't map %ld pages rc:%d\n", __func__, nr_pages, rc); - free_xenballooned_pages(nr_pages, pages); + xen_free_unpopulated_pages(nr_pages, pages); kfree(pages); kfree(pfns); return -ENOMEM; diff --git a/include/xen/xen.h b/include/xen/xen.h index 19a72f591e2b..43efba045acc 100644 --- a/include/xen/xen.h +++ b/include/xen/xen.h @@ -52,4 +52,13 @@ bool xen_biovec_phys_mergeable(const struct bio_vec *vec1, extern u64 xen_saved_max_mem_size; #endif +#ifdef CONFIG_XEN_UNPOPULATED_ALLOC +int xen_alloc_unpopulated_pages(unsigned int nr_pages, struct page **pages); +void xen_free_unpopulated_pages(unsigned int nr_pages, struct page **pages); +#else +#define xen_alloc_unpopulated_pages alloc_xenballooned_pages +#define xen_free_unpopulated_pages free_xenballooned_pages +#include <xen/balloon.h> +#endif + #endif /* _XEN_XEN_H */
To be used in order to create foreign mappings. This is based on the ZONE_DEVICE facility which is used by persistent memory devices in order to create struct pages and kernel virtual mappings for the IOMEM areas of such devices. Note that on kernels without support for ZONE_DEVICE Xen will fallback to use ballooned pages in order to create foreign mappings. The newly added helpers use the same parameters as the existing {alloc/free}_xenballooned_pages functions, which allows for in-place replacement of the callers. Once a memory region has been added to be used as scratch mapping space it will no longer be released, and pages returned are kept in a linked list. This allows to have a buffer of pages and prevents resorting to frequent additions and removals of regions. If enabled (because ZONE_DEVICE is supported) the usage of the new functionality untangles Xen balloon and RAM hotplug from the usage of unpopulated physical memory ranges to map foreign pages, which is the correct thing to do in order to avoid mappings of foreign pages depend on memory hotplug. Note the driver is currently not enabled on Arm platforms because it would interfere with the identity mapping required on some platforms. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> --- Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Roger Pau Monne <roger.pau@citrix.com> Cc: Wei Liu <wl@xen.org> Cc: Yan Yankovskyi <yyankovskyi@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: xen-devel@lists.xenproject.org Cc: linux-mm@kvack.org Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> --- Changes since v3: - Introduce a Kconfig option that gates the addition of the unpopulated alloc driver. This allows to easily disable it on Arm platforms. - Dropped Juergen RB due to the addition of the Kconfig option. - Switched from MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC. Changes since v2: - Drop BUILD_BUG_ON regarding PVMMU page sizes. - Use a SPDX license identifier. - Call fill with only the minimum required number of pages. - Include xen.h header in xen_drm_front_gem.c. - Use less generic function names. - Exit early from the init function if not a PV guest. - Don't use all caps for region name. --- drivers/gpu/drm/xen/xen_drm_front_gem.c | 9 +- drivers/xen/Kconfig | 4 + drivers/xen/Makefile | 1 + drivers/xen/balloon.c | 4 +- drivers/xen/grant-table.c | 4 +- drivers/xen/privcmd.c | 4 +- drivers/xen/unpopulated-alloc.c | 185 ++++++++++++++++++++++++ drivers/xen/xenbus/xenbus_client.c | 6 +- drivers/xen/xlate_mmu.c | 4 +- include/xen/xen.h | 9 ++ 10 files changed, 215 insertions(+), 15 deletions(-) create mode 100644 drivers/xen/unpopulated-alloc.c