@@ -15,8 +15,9 @@ power/power-domain.yaml. It provides the power domains defined in
- include/dt-bindings/power/mt2701-power.h
- include/dt-bindings/power/mt2712-power.h
- include/dt-bindings/power/mt7622-power.h
+- include/dt-bindings/power/mt8183-power.h
-Required properties:
+Required properties for power controller:
- compatible: Should be one of:
- "mediatek,mt2701-scpsys"
- "mediatek,mt2712-scpsys"
@@ -27,12 +28,15 @@ Required properties:
- "mediatek,mt7623a-scpsys": For MT7623A SoC
- "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC
- "mediatek,mt8173-scpsys"
+ - "mediatek,mt8183-scpsys"
- #power-domain-cells: Must be 1
+- #address-cells: Should be 1
+- #size-cells: Should be 0
- reg: Address range of the SCPSYS unit
- infracfg: must contain a phandle to the infracfg controller
-- clock, clock-names: clocks according to the common clock binding.
- These are clocks which hardware needs to be
- enabled before enabling certain power domains.
+- clocks, clock-names: clocks according to the common clock binding.
+ These are clocks which hardware needs to be
+ enabled before enabling certain power domains.
Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
Required clocks for MT6765: MUX: "mm", "mfg"
@@ -43,8 +47,11 @@ Required properties:
Required clocks for MT7622 or MT7629: "hif_sel"
Required clocks for MT7623A: "ethif"
Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
+ Required clocks for MT8183: "audio", "audio1", "audio2", "mfg", "mm",
+ "cam", "isp", "vpu", "vpu1", "vpu2",
+ "vpu3";
-Optional properties:
+Optional properties for power controller:
- vdec-supply: Power supply for the vdec power domain
- venc-supply: Power supply for the venc power domain
- isp-supply: Power supply for the isp power domain
@@ -55,6 +62,16 @@ Optional properties:
- mfg_async-supply: Power supply for the mfg_async power domain
- mfg_2d-supply: Power supply for the mfg_2d power domain
- mfg-supply: Power supply for the mfg power domain
+- mediatek,smi : A phandle to the smi_common node
+
+Required properties for power domain sub nodes:
+- reg: index of the power domain, should use macros in:
+ "include/dt-bindings/power/mt8192-power.h" - for power domain of MT8192.
+
+Optional properties for power domain sub nodes:
+- clocks: clocks according to the common clock binding.
+ These are clocks which hardware needs to be enabled before
+ releasing the bus protection.
Example:
@@ -70,6 +87,60 @@ Example:
clock-names = "mfg", "mm", "venc", "venc_lt";
};
+Example(power domain sub node within power controller):
+
+ scpsys: power-controller@10006000 {
+ compatible = "mediatek,mt8183-scpsys", "syscon";
+ reg = <0 0x10006000 0 0x1000>;
+ clocks = <&topckgen CLK_TOP_MUX_MM>,
+ <&topckgen CLK_TOP_MUX_IPU_IF>,
+ <&topckgen CLK_TOP_MUX_DSP>,
+ <&topckgen CLK_TOP_MUX_DSP1>,
+ <&topckgen CLK_TOP_MUX_DSP2>;
+ clock-names = "mm", "vpu", "vpu1", "vpu2", "vpu3";
+ infracfg = <&infracfg>;
+ mediatek,smi = <&smi_common>;
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ conn@MT8183_POWER_DOMAIN_CONN {
+ reg = <MT8183_POWER_DOMAIN_CONN>;
+ };
+
+ disp@MT8183_POWER_DOMAIN_DISP {
+ reg = <MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB1>,
+ <&mmsys CLK_MM_GALS_COMM0>,
+ <&mmsys CLK_MM_GALS_COMM1>,
+ <&mmsys CLK_MM_GALS_CCU2MM>,
+ <&mmsys CLK_MM_GALS_IPU12MM>,
+ <&mmsys CLK_MM_GALS_IMG2MM>,
+ <&mmsys CLK_MM_GALS_CAM2MM>,
+ <&mmsys CLK_MM_GALS_IPU2MM>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vpu_top@MT8183_POWER_DOMAIN_VPU_TOP {
+ reg = <MT8183_POWER_DOMAIN_VPU_TOP>;
+ clocks = <&ipu_conn CLK_IPU_CONN_IPU>,
+ <&ipu_conn CLK_IPU_CONN_AHB>,
+ <&ipu_conn CLK_IPU_CONN_AXI>,
+ <&ipu_conn CLK_IPU_CONN_ISP>,
+ <&ipu_conn CLK_IPU_CONN_CAM_ADL>,
+ <&ipu_conn CLK_IPU_CONN_IMG_ADL>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vpu_core0@MT8183_POWER_DOMAIN_VPU_CORE0 {
+ reg = <MT8183_POWER_DOMAIN_VPU_CORE0>;
+ };
+ };
+ };
+ };
+
Example consumer:
afe: mt8173-afe-pcm@11220000 {
new file mode 100644
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H
+#define _DT_BINDINGS_POWER_MT8183_POWER_H
+
+#define MT8183_POWER_DOMAIN_AUDIO 0
+#define MT8183_POWER_DOMAIN_CONN 1
+#define MT8183_POWER_DOMAIN_MFG_ASYNC 2
+#define MT8183_POWER_DOMAIN_MFG 3
+#define MT8183_POWER_DOMAIN_MFG_CORE0 4
+#define MT8183_POWER_DOMAIN_MFG_CORE1 5
+#define MT8183_POWER_DOMAIN_MFG_2D 6
+#define MT8183_POWER_DOMAIN_DISP 7
+#define MT8183_POWER_DOMAIN_CAM 8
+#define MT8183_POWER_DOMAIN_ISP 9
+#define MT8183_POWER_DOMAIN_VDEC 10
+#define MT8183_POWER_DOMAIN_VENC 11
+#define MT8183_POWER_DOMAIN_VPU_TOP 12
+#define MT8183_POWER_DOMAIN_VPU_CORE0 13
+#define MT8183_POWER_DOMAIN_VPU_CORE1 14
+
+#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
Add power dt-bindings of MT8183. Add an optional "mediatek,smi" property for phandle to smi-common node for power controller. Introduce properties for power domain sub nodes. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> --- .../devicetree/bindings/soc/mediatek/scpsys.txt | 81 ++++++++++++++++++++-- include/dt-bindings/power/mt8183-power.h | 26 +++++++ 2 files changed, 102 insertions(+), 5 deletions(-) create mode 100644 include/dt-bindings/power/mt8183-power.h