| Message ID | 20200825124711.11455-4-nish.malpani25@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: gyro: adxrs290: Add triggered buffer & debugfs support | expand |
On Tue, 25 Aug 2020 18:17:11 +0530 Nishant Malpani <nish.malpani25@gmail.com> wrote: > Extend support to read/write byte data from/to the device using > debugfs iio interface. > > Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com> Hi Nishant, I'm always a bit unsure on whether I want drivers to provide this interface, as it isn't something that should be of much use once initial driver debugging is done. However, the patch is good so if you want to add it fair enough. I'll pick it up once patches 1 and 2 are ready. Thanks, Jonathan > --- > drivers/iio/gyro/adxrs290.c | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/drivers/iio/gyro/adxrs290.c b/drivers/iio/gyro/adxrs290.c > index 25046590761e..b0050cdd2b90 100644 > --- a/drivers/iio/gyro/adxrs290.c > +++ b/drivers/iio/gyro/adxrs290.c > @@ -435,6 +435,24 @@ static int adxrs290_read_avail(struct iio_dev *indio_dev, > } > } > > +static int adxrs290_reg_access(struct iio_dev *indio_dev, unsigned int reg, > + unsigned int writeval, unsigned int *readval) > +{ > + struct adxrs290_state *st = iio_priv(indio_dev); > + int ret; > + > + if (!readval) > + return adxrs290_spi_write_reg(st->spi, reg, writeval); > + > + ret = spi_w8r8(st->spi, ADXRS290_READ_REG(reg)); > + if (ret < 0) > + return ret; > + > + *readval = ret; > + > + return 0; > +} > + > static int adxrs290_data_rdy_trigger_set_state(struct iio_trigger *trig, bool state) > { > struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); > @@ -547,6 +565,7 @@ static const struct iio_info adxrs290_info = { > .read_raw = &adxrs290_read_raw, > .write_raw = &adxrs290_write_raw, > .read_avail = &adxrs290_read_avail, > + .debugfs_reg_access = &adxrs290_reg_access, > }; > > static int adxrs290_probe_trigger(struct iio_dev *indio_dev)
diff --git a/drivers/iio/gyro/adxrs290.c b/drivers/iio/gyro/adxrs290.c index 25046590761e..b0050cdd2b90 100644 --- a/drivers/iio/gyro/adxrs290.c +++ b/drivers/iio/gyro/adxrs290.c @@ -435,6 +435,24 @@ static int adxrs290_read_avail(struct iio_dev *indio_dev, } } +static int adxrs290_reg_access(struct iio_dev *indio_dev, unsigned int reg, + unsigned int writeval, unsigned int *readval) +{ + struct adxrs290_state *st = iio_priv(indio_dev); + int ret; + + if (!readval) + return adxrs290_spi_write_reg(st->spi, reg, writeval); + + ret = spi_w8r8(st->spi, ADXRS290_READ_REG(reg)); + if (ret < 0) + return ret; + + *readval = ret; + + return 0; +} + static int adxrs290_data_rdy_trigger_set_state(struct iio_trigger *trig, bool state) { struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); @@ -547,6 +565,7 @@ static const struct iio_info adxrs290_info = { .read_raw = &adxrs290_read_raw, .write_raw = &adxrs290_write_raw, .read_avail = &adxrs290_read_avail, + .debugfs_reg_access = &adxrs290_reg_access, }; static int adxrs290_probe_trigger(struct iio_dev *indio_dev)
Extend support to read/write byte data from/to the device using debugfs iio interface. Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com> --- drivers/iio/gyro/adxrs290.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)