| Message ID | 20200827065144.17683-4-lokeshvutla@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: Initial support for Texas Instrument's J7200 Platform | expand |
Hi Lokesh, On 8/27/20 1:51 AM, Lokesh Vutla wrote: > The J7200 SoC is a part of the K3 Multicore SoC architecture platform. > It is targeted for automotive gateway, vehicle compute systems, > Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. > The SoC aims to meet the complex processing needs of modern embedded > products. > > Some highlights of this SoC are: > * Dual Cortex-A72s in a single cluster, two clusters of lockstep > capable dual Cortex-R5F MCUs and a Centralized Device Management and > Security Controller (DMSC). > * Configurable L3 Cache and IO-coherent architecture with high data > throughput capable distributed DMA architecture under NAVSS. > * Integrated Ethernet switch supporting up to a total of 4 external ports > in addition to legacy Ethernet switch of up to 2 ports. > * Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems, > 20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C > and I2C, eCAP/eQEP, eHRPWM among other peripherals. > * One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL > management. > > See J7200 Technical Reference Manual (SPRUIU1, June 2020) > for further details: https://www.ti.com/lit/pdf/spruiu1 > > Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> > --- > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++ > .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++ > arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++ > 3 files changed, 448 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi > > diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > new file mode 100644 > index 000000000000..70c8f7e941fb > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > @@ -0,0 +1,199 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J7200 SoC Family Main Domain peripherals > + * > + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ > + */ > + > +&cbass_main { > + msmc_ram: sram@70000000 { > + compatible = "mmio-sram"; > + reg = <0x0 0x70000000 0x0 0x100000>; nit, I prefer that we use a consistent style across all nodes. Most of the places we are using 0x00 on the first cells of address and size. > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x70000000 0x100000>; > + > + atf-sram@0 { > + reg = <0x0 0x20000>; > + }; > + }; > + > + gic500: interrupt-controller@1800000 { > + compatible = "arm,gic-v3"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ > + <0x00 0x01900000 0x00 0x100000>; /* GICR */ > + > + /* vcpumntirq: virtual CPU interface maintenance interrupt */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + > + gic_its: msi-controller@1820000 { > + compatible = "arm,gic-v3-its"; > + reg = <0x00 0x01820000 0x00 0x10000>; > + socionext,synquacer-pre-its = <0x1000000 0x400000>; > + msi-controller; > + #msi-cells = <1>; > + }; > + }; > + > + main_navss: navss@30000000 { > + compatible = "simple-mfd"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; > + > + secure_proxy_main: mailbox@32c00000 { > + compatible = "ti,am654-secure-proxy"; > + #mbox-cells = <1>; > + reg-names = "target_data", "rt", "scfg"; > + reg = <0x00 0x32c00000 0x00 0x100000>, > + <0x00 0x32400000 0x00 0x100000>, > + <0x00 0x32800000 0x00 0x100000>; > + interrupt-names = "rx_011"; > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > + }; > + }; > + > + main_pmx0: pinmux@11c000 { > + compatible = "pinctrl-single"; > + /* Proxy 0 addressing */ > + reg = <0x0 0x11c000 0x0 0x2b4>; This is the other node that uses a different style compared to all other nodes. Otherwise, Reviewed-by: Suman Anna <s-anna@ti.com> regards Suman > + #pinctrl-cells = <1>; > + pinctrl-single,register-width = <32>; > + pinctrl-single,function-mask = <0xffffffff>; > + }; > + > + main_uart0: serial@2800000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02800000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 146 2>; > + clock-names = "fclk"; > + }; > + > + main_uart1: serial@2810000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02810000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 278 2>; > + clock-names = "fclk"; > + }; > + > + main_uart2: serial@2820000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02820000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 279 2>; > + clock-names = "fclk"; > + }; > + > + main_uart3: serial@2830000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02830000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 280 2>; > + clock-names = "fclk"; > + }; > + > + main_uart4: serial@2840000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02840000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 281 2>; > + clock-names = "fclk"; > + }; > + > + main_uart5: serial@2850000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02850000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 282 2>; > + clock-names = "fclk"; > + }; > + > + main_uart6: serial@2860000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02860000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 283 2>; > + clock-names = "fclk"; > + }; > + > + main_uart7: serial@2870000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02870000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 284 2>; > + clock-names = "fclk"; > + }; > + > + main_uart8: serial@2880000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02880000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 285 2>; > + clock-names = "fclk"; > + }; > + > + main_uart9: serial@2890000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02890000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 286 2>; > + clock-names = "fclk"; > + }; > +}; > diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi > new file mode 100644 > index 000000000000..670e4c7cd9fe > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi > @@ -0,0 +1,84 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals > + * > + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ > + */ > + > +&cbass_mcu_wakeup { > + dmsc: dmsc@44083000 { > + compatible = "ti,k2g-sci"; > + ti,host-id = <12>; > + > + mbox-names = "rx", "tx"; > + > + mboxes= <&secure_proxy_main 11>, > + <&secure_proxy_main 13>; > + > + reg-names = "debug_messages"; > + reg = <0x00 0x44083000 0x0 0x1000>; > + > + k3_pds: power-controller { > + compatible = "ti,sci-pm-domain"; > + #power-domain-cells = <2>; > + }; > + > + k3_clks: clocks { > + compatible = "ti,k2g-sci-clk"; > + #clock-cells = <2>; > + }; > + > + k3_reset: reset-controller { > + compatible = "ti,sci-reset"; > + #reset-cells = <2>; > + }; > + }; > + > + chipid@43000014 { > + compatible = "ti,am654-chipid"; > + reg = <0x0 0x43000014 0x0 0x4>; > + }; > + > + wkup_pmx0: pinmux@4301c000 { > + compatible = "pinctrl-single"; > + /* Proxy 0 addressing */ > + reg = <0x00 0x4301c000 0x00 0x178>; > + #pinctrl-cells = <1>; > + pinctrl-single,register-width = <32>; > + pinctrl-single,function-mask = <0xffffffff>; > + }; > + > + mcu_ram: sram@41c00000 { > + compatible = "mmio-sram"; > + reg = <0x00 0x41c00000 0x00 0x100000>; > + ranges = <0x0 0x00 0x41c00000 0x100000>; > + #address-cells = <1>; > + #size-cells = <1>; > + }; > + > + wkup_uart0: serial@42300000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x42300000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 287 2>; > + clock-names = "fclk"; > + }; > + > + mcu_uart0: serial@40a00000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x40a00000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <96000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 149 2>; > + clock-names = "fclk"; > + }; > +}; > diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi > new file mode 100644 > index 000000000000..aadf707f25f5 > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi > @@ -0,0 +1,165 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J7200 SoC Family > + * > + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ > + */ > + > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/pinctrl/k3.h> > +#include <dt-bindings/soc/ti,sci_pm_domain.h> > + > +/ { > + model = "Texas Instruments K3 J7200 SoC"; > + compatible = "ti,j7200"; > + interrupt-parent = <&gic500>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + serial0 = &wkup_uart0; > + serial1 = &mcu_uart0; > + serial2 = &main_uart0; > + serial3 = &main_uart1; > + serial4 = &main_uart2; > + serial5 = &main_uart3; > + serial6 = &main_uart4; > + serial7 = &main_uart5; > + serial8 = &main_uart6; > + serial9 = &main_uart7; > + serial10 = &main_uart8; > + serial11 = &main_uart9; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + cpu-map { > + cluster0: cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + > + core1 { > + cpu = <&cpu1>; > + }; > + }; > + > + }; > + > + cpu0: cpu@0 { > + compatible = "arm,cortex-a72"; > + reg = <0x000>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0xC000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&L2_0>; > + }; > + > + cpu1: cpu@1 { > + compatible = "arm,cortex-a72"; > + reg = <0x001>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0xC000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&L2_0>; > + }; > + }; > + > + L2_0: l2-cache0 { > + compatible = "cache"; > + cache-level = <2>; > + cache-size = <0x100000>; > + cache-line-size = <64>; > + cache-sets = <2048>; > + next-level-cache = <&msmc_l3>; > + }; > + > + msmc_l3: l3-cache0 { > + compatible = "cache"; > + cache-level = <3>; > + }; > + > + firmware { > + optee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + > + psci: psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + }; > + > + a72_timer0: timer-cl0-cpu0 { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ > + }; > + > + pmu: pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + cbass_main: bus@100000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ > + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ > + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ > + <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ > + <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ > + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */ > + <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT */ > + > + /* MCUSS_WKUP Range */ > + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, > + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, > + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, > + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, > + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, > + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, > + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, > + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, > + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, > + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, > + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>; > + > + cbass_mcu_wakeup: bus@28380000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ > + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ > + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ > + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ > + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ > + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ > + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ > + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ > + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ > + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ > + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>; /* FSS OSPI0/1 data region 0 */ > + }; > + }; > +}; > + > +/* Now include the peripherals for each bus segments */ > +#include "k3-j7200-main.dtsi" > +#include "k3-j7200-mcu-wakeup.dtsi" >
Hi Lokesh, On 27/08/2020 9.51, Lokesh Vutla wrote: > The J7200 SoC is a part of the K3 Multicore SoC architecture platform. > It is targeted for automotive gateway, vehicle compute systems, > Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. > The SoC aims to meet the complex processing needs of modern embedded > products. > > Some highlights of this SoC are: > * Dual Cortex-A72s in a single cluster, two clusters of lockstep > capable dual Cortex-R5F MCUs and a Centralized Device Management and > Security Controller (DMSC). > * Configurable L3 Cache and IO-coherent architecture with high data > throughput capable distributed DMA architecture under NAVSS. > * Integrated Ethernet switch supporting up to a total of 4 external ports > in addition to legacy Ethernet switch of up to 2 ports. > * Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems, > 20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C > and I2C, eCAP/eQEP, eHRPWM among other peripherals. > * One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL > management. > > See J7200 Technical Reference Manual (SPRUIU1, June 2020) > for further details: https://www.ti.com/lit/pdf/spruiu1 > > Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> > --- > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++ > .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++ > arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++ > 3 files changed, 448 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi > > diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > new file mode 100644 > index 000000000000..70c8f7e941fb > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > @@ -0,0 +1,199 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J7200 SoC Family Main Domain peripherals > + * > + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ > + */ > + > +&cbass_main { > + msmc_ram: sram@70000000 { > + compatible = "mmio-sram"; > + reg = <0x0 0x70000000 0x0 0x100000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x70000000 0x100000>; > + > + atf-sram@0 { > + reg = <0x0 0x20000>; > + }; > + }; > + > + gic500: interrupt-controller@1800000 { > + compatible = "arm,gic-v3"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ > + <0x00 0x01900000 0x00 0x100000>; /* GICR */ > + > + /* vcpumntirq: virtual CPU interface maintenance interrupt */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + > + gic_its: msi-controller@1820000 { > + compatible = "arm,gic-v3-its"; > + reg = <0x00 0x01820000 0x00 0x10000>; > + socionext,synquacer-pre-its = <0x1000000 0x400000>; > + msi-controller; > + #msi-cells = <1>; > + }; > + }; > + > + main_navss: navss@30000000 { > + compatible = "simple-mfd"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; > + > + secure_proxy_main: mailbox@32c00000 { > + compatible = "ti,am654-secure-proxy"; > + #mbox-cells = <1>; > + reg-names = "target_data", "rt", "scfg"; > + reg = <0x00 0x32c00000 0x00 0x100000>, > + <0x00 0x32400000 0x00 0x100000>, > + <0x00 0x32800000 0x00 0x100000>; > + interrupt-names = "rx_011"; > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > + }; Would it make sense to have the nodes needed for DMA also in the initial commit? mainline is prepared for it. - Péter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Hi Peter, On 31/08/20 2:43 pm, Peter Ujfalusi wrote: > Hi Lokesh, > > On 27/08/2020 9.51, Lokesh Vutla wrote: >> The J7200 SoC is a part of the K3 Multicore SoC architecture platform. >> It is targeted for automotive gateway, vehicle compute systems, >> Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. >> The SoC aims to meet the complex processing needs of modern embedded >> products. >> >> Some highlights of this SoC are: >> * Dual Cortex-A72s in a single cluster, two clusters of lockstep >> capable dual Cortex-R5F MCUs and a Centralized Device Management and >> Security Controller (DMSC). >> * Configurable L3 Cache and IO-coherent architecture with high data >> throughput capable distributed DMA architecture under NAVSS. >> * Integrated Ethernet switch supporting up to a total of 4 external ports >> in addition to legacy Ethernet switch of up to 2 ports. >> * Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems, >> 20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C >> and I2C, eCAP/eQEP, eHRPWM among other peripherals. >> * One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL >> management. >> >> See J7200 Technical Reference Manual (SPRUIU1, June 2020) >> for further details: https://www.ti.com/lit/pdf/spruiu1 >> >> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> >> --- >> arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++ >> .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++ >> arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++ >> 3 files changed, 448 insertions(+) >> create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi >> create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi >> create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi >> >> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi >> new file mode 100644 >> index 000000000000..70c8f7e941fb >> --- /dev/null >> +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi >> @@ -0,0 +1,199 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Device Tree Source for J7200 SoC Family Main Domain peripherals >> + * >> + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ >> + */ >> + >> +&cbass_main { >> + msmc_ram: sram@70000000 { >> + compatible = "mmio-sram"; >> + reg = <0x0 0x70000000 0x0 0x100000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0x0 0x0 0x70000000 0x100000>; >> + >> + atf-sram@0 { >> + reg = <0x0 0x20000>; >> + }; >> + }; >> + >> + gic500: interrupt-controller@1800000 { >> + compatible = "arm,gic-v3"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + #interrupt-cells = <3>; >> + interrupt-controller; >> + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ >> + <0x00 0x01900000 0x00 0x100000>; /* GICR */ >> + >> + /* vcpumntirq: virtual CPU interface maintenance interrupt */ >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + >> + gic_its: msi-controller@1820000 { >> + compatible = "arm,gic-v3-its"; >> + reg = <0x00 0x01820000 0x00 0x10000>; >> + socionext,synquacer-pre-its = <0x1000000 0x400000>; >> + msi-controller; >> + #msi-cells = <1>; >> + }; >> + }; >> + >> + main_navss: navss@30000000 { >> + compatible = "simple-mfd"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; >> + >> + secure_proxy_main: mailbox@32c00000 { >> + compatible = "ti,am654-secure-proxy"; >> + #mbox-cells = <1>; >> + reg-names = "target_data", "rt", "scfg"; >> + reg = <0x00 0x32c00000 0x00 0x100000>, >> + <0x00 0x32400000 0x00 0x100000>, >> + <0x00 0x32800000 0x00 0x100000>; >> + interrupt-names = "rx_011"; >> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; >> + }; > > Would it make sense to have the nodes needed for DMA also in the initial > commit? > mainline is prepared for it. They are fairly independent patches. IMHO, they can come separately. This series is lying around for long time. I would prefer to get this base support in asap. Thanks and regards, Lokesh > > - Péter > > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. > Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki >
On 12:04-20200827, Suman Anna wrote: will just piggy on this thread.. > > diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > > new file mode 100644 > > index 000000000000..70c8f7e941fb > > --- /dev/null > > +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > > @@ -0,0 +1,199 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Device Tree Source for J7200 SoC Family Main Domain peripherals > > + * > > + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ > > + */ > > + > > +&cbass_main { > > + msmc_ram: sram@70000000 { > > + compatible = "mmio-sram"; > > + reg = <0x0 0x70000000 0x0 0x100000>; > > nit, I prefer that we use a consistent style across all nodes. Most of the > places we are using 0x00 on the first cells of address and size. yes please. Will be great if you could address this. > [...] > > + > > + main_pmx0: pinmux@11c000 { > > + compatible = "pinctrl-single"; > > + /* Proxy 0 addressing */ > > + reg = <0x0 0x11c000 0x0 0x2b4>; > > This is the other node that uses a different style compared to all other nodes. > > Otherwise, > > Reviewed-by: Suman Anna <s-anna@ti.com> > > regards > Suman > [..] > > diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi > > new file mode 100644 > > index 000000000000..aadf707f25f5 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi > > @@ -0,0 +1,165 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Device Tree Source for J7200 SoC Family > > + * > > + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ > > + */ > > + > > +#include <dt-bindings/interrupt-controller/irq.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > +#include <dt-bindings/pinctrl/k3.h> > > +#include <dt-bindings/soc/ti,sci_pm_domain.h> > > + > > +/ { > > + model = "Texas Instruments K3 J7200 SoC"; > > + compatible = "ti,j7200"; > > + interrupt-parent = <&gic500>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + aliases { > > + serial0 = &wkup_uart0; > > + serial1 = &mcu_uart0; > > + serial2 = &main_uart0; > > + serial3 = &main_uart1; > > + serial4 = &main_uart2; > > + serial5 = &main_uart3; > > + serial6 = &main_uart4; > > + serial7 = &main_uart5; > > + serial8 = &main_uart6; > > + serial9 = &main_uart7; > > + serial10 = &main_uart8; > > + serial11 = &main_uart9; > > + }; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + cpu-map { > > + cluster0: cluster0 { > > + core0 { > > + cpu = <&cpu0>; > > + }; > > + > > + core1 { > > + cpu = <&cpu1>; > > + }; > > + }; > > + > > + }; > > + > > + cpu0: cpu@0 { > > + compatible = "arm,cortex-a72"; > > + reg = <0x000>; > > + device_type = "cpu"; > > + enable-method = "psci"; > > + i-cache-size = <0xC000>; minor nitpick comment -> 0xc000 ? I just saw j721e has the same as well.. heck.. I thought I found them all, but looks like I missed. > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&L2_0>; > > + }; > > + > > + cpu1: cpu@1 { > > + compatible = "arm,cortex-a72"; > > + reg = <0x001>; > > + device_type = "cpu"; > > + enable-method = "psci"; > > + i-cache-size = <0xC000>; same.. > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&L2_0>; > > + }; > > + }; > > + > Other wise, looks fine to me.
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi new file mode 100644 index 000000000000..70c8f7e941fb --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J7200 SoC Family Main Domain peripherals + * + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_main { + msmc_ram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x0 0x70000000 0x0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x70000000 0x100000>; + + atf-sram@0 { + reg = <0x0 0x20000>; + }; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01900000 0x00 0x100000>; /* GICR */ + + /* vcpumntirq: virtual CPU interface maintenance interrupt */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + main_navss: navss@30000000 { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + main_pmx0: pinmux@11c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x0 0x11c000 0x0 0x2b4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 146 2>; + clock-names = "fclk"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 278 2>; + clock-names = "fclk"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 279 2>; + clock-names = "fclk"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 280 2>; + clock-names = "fclk"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 281 2>; + clock-names = "fclk"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 282 2>; + clock-names = "fclk"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 283 2>; + clock-names = "fclk"; + }; + + main_uart7: serial@2870000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02870000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 284 2>; + clock-names = "fclk"; + }; + + main_uart8: serial@2880000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02880000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 285 2>; + clock-names = "fclk"; + }; + + main_uart9: serial@2890000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02890000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 286 2>; + clock-names = "fclk"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi new file mode 100644 index 000000000000..670e4c7cd9fe --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals + * + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_mcu_wakeup { + dmsc: dmsc@44083000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + reg-names = "debug_messages"; + reg = <0x00 0x44083000 0x0 0x1000>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x0 0x43000014 0x0 0x4>; + }; + + wkup_pmx0: pinmux@4301c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c000 0x00 0x178>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + mcu_ram: sram@41c00000 { + compatible = "mmio-sram"; + reg = <0x00 0x41c00000 0x00 0x100000>; + ranges = <0x0 0x00 0x41c00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 287 2>; + clock-names = "fclk"; + }; + + mcu_uart0: serial@40a00000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 149 2>; + clock-names = "fclk"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi new file mode 100644 index 000000000000..aadf707f25f5 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J7200 SoC Family + * + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +/ { + model = "Texas Instruments K3 J7200 SoC"; + compatible = "ti,j7200"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + serial5 = &main_uart3; + serial6 = &main_uart4; + serial7 = &main_uart5; + serial8 = &main_uart6; + serial9 = &main_uart7; + serial10 = &main_uart8; + serial11 = &main_uart9; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a72"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a72_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: bus@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ + <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */ + <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT */ + + /* MCUSS_WKUP Range */ + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>; + + cbass_mcu_wakeup: bus@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>; /* FSS OSPI0/1 data region 0 */ + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-j7200-main.dtsi" +#include "k3-j7200-mcu-wakeup.dtsi"
The J7200 SoC is a part of the K3 Multicore SoC architecture platform. It is targeted for automotive gateway, vehicle compute systems, Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. The SoC aims to meet the complex processing needs of modern embedded products. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, two clusters of lockstep capable dual Cortex-R5F MCUs and a Centralized Device Management and Security Controller (DMSC). * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS. * Integrated Ethernet switch supporting up to a total of 4 external ports in addition to legacy Ethernet switch of up to 2 ports. * Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems, 20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C and I2C, eCAP/eQEP, eHRPWM among other peripherals. * One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. See J7200 Technical Reference Manual (SPRUIU1, June 2020) for further details: https://www.ti.com/lit/pdf/spruiu1 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++ 3 files changed, 448 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi