diff mbox series

[V2,4/8] mmc: sdhci-msm: Unconditionally call dev_pm_opp_of_remove_table()

Message ID 1d7c97524b9e1fbc60271d9c246c5461ca8a106c.1598594714.git.viresh.kumar@linaro.org (mailing list archive)
State New, archived
Headers show
Series opp: Unconditionally call dev_pm_opp_of_remove_table() | expand

Commit Message

Viresh Kumar Aug. 28, 2020, 6:07 a.m. UTC
dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
find the OPP table with error -ENODEV (i.e. OPP table not present for
the device). And we can call dev_pm_opp_of_remove_table()
unconditionally here.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

---
V2:
- Compare with -ENODEV only for failures.
- Create new label to put clkname.
---
 drivers/mmc/host/sdhci-msm.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

Comments

Ulf Hansson Aug. 28, 2020, 8:43 a.m. UTC | #1
On Fri, 28 Aug 2020 at 08:08, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
> find the OPP table with error -ENODEV (i.e. OPP table not present for
> the device). And we can call dev_pm_opp_of_remove_table()
> unconditionally here.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Replaced v1 with v2 on my next branch, thanks!

Just to be sure, this patch doesn't depend on any changes for the opp
core that are queued for v5.10?

Kind regards
Uffe



>
> ---
> V2:
> - Compare with -ENODEV only for failures.
> - Create new label to put clkname.
> ---
>  drivers/mmc/host/sdhci-msm.c | 14 +++++---------
>  1 file changed, 5 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 5a33389037cd..f7beaec6412e 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -263,7 +263,6 @@ struct sdhci_msm_host {
>         unsigned long clk_rate;
>         struct mmc_host *mmc;
>         struct opp_table *opp_table;
> -       bool has_opp_table;
>         bool use_14lpp_dll_reset;
>         bool tuning_done;
>         bool calibration_done;
> @@ -2285,11 +2284,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
>
>         /* OPP table is optional */
>         ret = dev_pm_opp_of_add_table(&pdev->dev);
> -       if (!ret) {
> -               msm_host->has_opp_table = true;
> -       } else if (ret != -ENODEV) {
> +       if (ret && ret != -ENODEV) {
>                 dev_err(&pdev->dev, "Invalid OPP table in Device tree\n");
> -               goto opp_cleanup;
> +               goto opp_put_clkname;
>         }
>
>         /* Vote for maximum clock rate for maximum performance */
> @@ -2453,8 +2450,8 @@ static int sdhci_msm_probe(struct platform_device *pdev)
>         clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
>                                    msm_host->bulk_clks);
>  opp_cleanup:
> -       if (msm_host->has_opp_table)
> -               dev_pm_opp_of_remove_table(&pdev->dev);
> +       dev_pm_opp_of_remove_table(&pdev->dev);
> +opp_put_clkname:
>         dev_pm_opp_put_clkname(msm_host->opp_table);
>  bus_clk_disable:
>         if (!IS_ERR(msm_host->bus_clk))
> @@ -2474,8 +2471,7 @@ static int sdhci_msm_remove(struct platform_device *pdev)
>
>         sdhci_remove_host(host, dead);
>
> -       if (msm_host->has_opp_table)
> -               dev_pm_opp_of_remove_table(&pdev->dev);
> +       dev_pm_opp_of_remove_table(&pdev->dev);
>         dev_pm_opp_put_clkname(msm_host->opp_table);
>         pm_runtime_get_sync(&pdev->dev);
>         pm_runtime_disable(&pdev->dev);
> --
> 2.25.0.rc1.19.g042ed3e048af
>
Douglas Anderson Aug. 28, 2020, 3:06 p.m. UTC | #2
Hi,

On Fri, Aug 28, 2020 at 1:44 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Fri, 28 Aug 2020 at 08:08, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
> > find the OPP table with error -ENODEV (i.e. OPP table not present for
> > the device). And we can call dev_pm_opp_of_remove_table()
> > unconditionally here.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> Replaced v1 with v2 on my next branch, thanks!

Actually, I don't see it on there yet, but at least the old broken v1
isn't there anymore.  ;-)

I picked v2 and tried it on my sc7180-based device (which does have
OPP tables).  It worked fine.  Thus:

Tested-by: Douglas Anderson <dianders@chromium.org>

I looked at the code and it looks right to me.  Thus:

Reviewed-by: Douglas Anderson <dianders@chromium.org>


> Just to be sure, this patch doesn't depend on any changes for the opp
> core that are queued for v5.10?

Running atop mmc-next, I see the check for -ENODEV, so I'm gonna
assume that the required change is there.

$ git grep -A10 'void _dev_pm_opp_find_and_remove_table' -- drivers/opp/core.c
drivers/opp/core.c:void _dev_pm_opp_find_and_remove_table(struct device *dev)
drivers/opp/core.c-{
drivers/opp/core.c-     struct opp_table *opp_table;
drivers/opp/core.c-
drivers/opp/core.c-     /* Check for existing table for 'dev' */
drivers/opp/core.c-     opp_table = _find_opp_table(dev);
drivers/opp/core.c-     if (IS_ERR(opp_table)) {
drivers/opp/core.c-             int error = PTR_ERR(opp_table);
drivers/opp/core.c-
drivers/opp/core.c-             if (error != -ENODEV)
drivers/opp/core.c-                     WARN(1, "%s: opp_table: %d\n",
Viresh Kumar Aug. 31, 2020, 6:23 a.m. UTC | #3
On 28-08-20, 10:43, Ulf Hansson wrote:
> On Fri, 28 Aug 2020 at 08:08, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
> > find the OPP table with error -ENODEV (i.e. OPP table not present for
> > the device). And we can call dev_pm_opp_of_remove_table()
> > unconditionally here.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> 
> Replaced v1 with v2 on my next branch, thanks!
> 
> Just to be sure, this patch doesn't depend on any changes for the opp
> core that are queued for v5.10?

No it doesn't.
Viresh Kumar Aug. 31, 2020, 10:44 a.m. UTC | #4
On 28-08-20, 10:43, Ulf Hansson wrote:
> On Fri, 28 Aug 2020 at 08:08, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
> > find the OPP table with error -ENODEV (i.e. OPP table not present for
> > the device). And we can call dev_pm_opp_of_remove_table()
> > unconditionally here.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> 
> Replaced v1 with v2 on my next branch, thanks!
> 
> Just to be sure, this patch doesn't depend on any changes for the opp
> core that are queued for v5.10?

The recent crashes reported by Anders and Naresh were related to a OPP
core bug, for which I have just sent the fix here:

https://lore.kernel.org/lkml/922ff0759a16299e24cacfc981ac07914d8f1826.1598865786.git.viresh.kumar@linaro.org/

This is already tested by Naresh now and finally everything works as
expected.

I am going to get this fix merged in 5.9-rc4, but we do have a
dependency now with that fix.

What's the best way to handle this stuff now ? The easiest IMO would
be for me to send these patches through the OPP tree, otherwise people
need to carry this and the OPP fix (for which I can provide the
branch/tag).
Ulf Hansson Aug. 31, 2020, 10:57 a.m. UTC | #5
On Mon, 31 Aug 2020 at 12:45, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 28-08-20, 10:43, Ulf Hansson wrote:
> > On Fri, 28 Aug 2020 at 08:08, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > >
> > > dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
> > > find the OPP table with error -ENODEV (i.e. OPP table not present for
> > > the device). And we can call dev_pm_opp_of_remove_table()
> > > unconditionally here.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> >
> > Replaced v1 with v2 on my next branch, thanks!
> >
> > Just to be sure, this patch doesn't depend on any changes for the opp
> > core that are queued for v5.10?
>
> The recent crashes reported by Anders and Naresh were related to a OPP
> core bug, for which I have just sent the fix here:
>
> https://lore.kernel.org/lkml/922ff0759a16299e24cacfc981ac07914d8f1826.1598865786.git.viresh.kumar@linaro.org/
>
> This is already tested by Naresh now and finally everything works as
> expected.
>
> I am going to get this fix merged in 5.9-rc4, but we do have a
> dependency now with that fix.
>
> What's the best way to handle this stuff now ? The easiest IMO would
> be for me to send these patches through the OPP tree, otherwise people
> need to carry this and the OPP fix (for which I can provide the
> branch/tag).

No need for a tag/branch to be shared. Instead I am simply going to
defer to pick up any related changes for mmc, until I can rebase my
tree on an rc[n] that contains your fix.

When that is possible, please re-post the mmc patches.

Kind regards
Uffe
Viresh Kumar Sept. 9, 2020, 11:07 a.m. UTC | #6
On 31-08-20, 12:57, Ulf Hansson wrote:
> On Mon, 31 Aug 2020 at 12:45, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > On 28-08-20, 10:43, Ulf Hansson wrote:
> > > On Fri, 28 Aug 2020 at 08:08, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > > >
> > > > dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
> > > > find the OPP table with error -ENODEV (i.e. OPP table not present for
> > > > the device). And we can call dev_pm_opp_of_remove_table()
> > > > unconditionally here.
> > > >
> > > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > >
> > > Replaced v1 with v2 on my next branch, thanks!
> > >
> > > Just to be sure, this patch doesn't depend on any changes for the opp
> > > core that are queued for v5.10?
> >
> > The recent crashes reported by Anders and Naresh were related to a OPP
> > core bug, for which I have just sent the fix here:
> >
> > https://lore.kernel.org/lkml/922ff0759a16299e24cacfc981ac07914d8f1826.1598865786.git.viresh.kumar@linaro.org/
> >
> > This is already tested by Naresh now and finally everything works as
> > expected.
> >
> > I am going to get this fix merged in 5.9-rc4, but we do have a
> > dependency now with that fix.
> >
> > What's the best way to handle this stuff now ? The easiest IMO would
> > be for me to send these patches through the OPP tree, otherwise people
> > need to carry this and the OPP fix (for which I can provide the
> > branch/tag).
> 
> No need for a tag/branch to be shared. Instead I am simply going to
> defer to pick up any related changes for mmc, until I can rebase my
> tree on an rc[n] that contains your fix.
> 
> When that is possible, please re-post the mmc patches.

The dependency patch got merged in 5.9-rc4. Do you still want me to
resend this patch or you can apply it directly from here ?
Ulf Hansson Sept. 9, 2020, 12:48 p.m. UTC | #7
On Wed, 9 Sep 2020 at 13:07, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 31-08-20, 12:57, Ulf Hansson wrote:
> > On Mon, 31 Aug 2020 at 12:45, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > >
> > > On 28-08-20, 10:43, Ulf Hansson wrote:
> > > > On Fri, 28 Aug 2020 at 08:08, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > > > >
> > > > > dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
> > > > > find the OPP table with error -ENODEV (i.e. OPP table not present for
> > > > > the device). And we can call dev_pm_opp_of_remove_table()
> > > > > unconditionally here.
> > > > >
> > > > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > >
> > > > Replaced v1 with v2 on my next branch, thanks!
> > > >
> > > > Just to be sure, this patch doesn't depend on any changes for the opp
> > > > core that are queued for v5.10?
> > >
> > > The recent crashes reported by Anders and Naresh were related to a OPP
> > > core bug, for which I have just sent the fix here:
> > >
> > > https://lore.kernel.org/lkml/922ff0759a16299e24cacfc981ac07914d8f1826.1598865786.git.viresh.kumar@linaro.org/
> > >
> > > This is already tested by Naresh now and finally everything works as
> > > expected.
> > >
> > > I am going to get this fix merged in 5.9-rc4, but we do have a
> > > dependency now with that fix.
> > >
> > > What's the best way to handle this stuff now ? The easiest IMO would
> > > be for me to send these patches through the OPP tree, otherwise people
> > > need to carry this and the OPP fix (for which I can provide the
> > > branch/tag).
> >
> > No need for a tag/branch to be shared. Instead I am simply going to
> > defer to pick up any related changes for mmc, until I can rebase my
> > tree on an rc[n] that contains your fix.
> >
> > When that is possible, please re-post the mmc patches.
>
> The dependency patch got merged in 5.9-rc4. Do you still want me to
> resend this patch or you can apply it directly from here ?

Please re-submit, then I will pick it from the patchtracker.

Kind regards
Uffe
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 5a33389037cd..f7beaec6412e 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -263,7 +263,6 @@  struct sdhci_msm_host {
 	unsigned long clk_rate;
 	struct mmc_host *mmc;
 	struct opp_table *opp_table;
-	bool has_opp_table;
 	bool use_14lpp_dll_reset;
 	bool tuning_done;
 	bool calibration_done;
@@ -2285,11 +2284,9 @@  static int sdhci_msm_probe(struct platform_device *pdev)
 
 	/* OPP table is optional */
 	ret = dev_pm_opp_of_add_table(&pdev->dev);
-	if (!ret) {
-		msm_host->has_opp_table = true;
-	} else if (ret != -ENODEV) {
+	if (ret && ret != -ENODEV) {
 		dev_err(&pdev->dev, "Invalid OPP table in Device tree\n");
-		goto opp_cleanup;
+		goto opp_put_clkname;
 	}
 
 	/* Vote for maximum clock rate for maximum performance */
@@ -2453,8 +2450,8 @@  static int sdhci_msm_probe(struct platform_device *pdev)
 	clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
 				   msm_host->bulk_clks);
 opp_cleanup:
-	if (msm_host->has_opp_table)
-		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
+opp_put_clkname:
 	dev_pm_opp_put_clkname(msm_host->opp_table);
 bus_clk_disable:
 	if (!IS_ERR(msm_host->bus_clk))
@@ -2474,8 +2471,7 @@  static int sdhci_msm_remove(struct platform_device *pdev)
 
 	sdhci_remove_host(host, dead);
 
-	if (msm_host->has_opp_table)
-		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
 	dev_pm_opp_put_clkname(msm_host->opp_table);
 	pm_runtime_get_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);