Message ID | 20200821041414.1560707-1-hsinyi@chromium.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | media: mtk-vcodec: set dma max segment size | expand |
Dear Hsin-Yi, because this Warning is occured with config CONFIG_DMA_API_DEBUG_SG=y, how about add these modifications with this configuration as well? On Fri, 2020-08-21 at 12:14 +0800, Hsin-Yi Wang wrote: > Set dma max segment size for encoder and decoder driver. > > Fix following warning with CONFIG_DMA_API_DEBUG_SG=y > > [ 75.147825] ------------[ cut here ]------------ > [ 75.147844] mtk-vcodec-enc 19002000.vcodec: DMA-API: mapping sg segment longer than device claims to support [len=983040] [max=65536] > [ 75.147876] WARNING: CPU: 2 PID: 4069 at kernel/dma/debug.c:1302 debug_dma_map_sg+0x1a8/0x2c4 > ... > [ 75.148139] Call trace: > [ 75.148149] debug_dma_map_sg+0x1a8/0x2c4 > [ 75.148165] vb2_dc_get_userptr+0x228/0x364 [videobuf2_dma_contig] > [ 75.148178] __buf_prepare+0x3ac/0x8c0 [videobuf2_common] > [ 75.148188] vb2_core_qbuf+0xa4/0x58c [videobuf2_common] > [ 75.148199] vb2_qbuf+0x88/0xe4 [videobuf2_v4l2] > [ 75.148211] v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem] > [ 75.148221] vidioc_venc_qbuf+0x3c/0x70 [mtk_vcodec_enc] > [ 75.148234] v4l_qbuf+0x48/0x58 > [ 75.148242] __video_do_ioctl+0x200/0x37c > [ 75.148250] video_usercopy+0x360/0x834 > [ 75.148259] video_ioctl2+0x38/0x48 > [ 75.148267] v4l2_ioctl+0x6c/0x80 > [ 75.148276] do_video_ioctl+0xefc/0x4b70 > [ 75.148284] v4l2_compat_ioctl32+0x5c/0xcc > [ 75.148294] __arm64_compat_sys_ioctl+0xf4/0x240 > [ 75.148304] el0_svc_common+0xac/0x198 > [ 75.148312] el0_svc_compat_handler+0x2c/0x40 > [ 75.148321] el0_svc_compat+0x8/0x18 > [ 75.148328] irq event stamp: 0 > [ 75.148337] hardirqs last enabled at (0): [<0000000000000000>] (null) > [ 75.148347] hardirqs last disabled at (0): [<ffffff90080e65c0>] copy_process+0x380/0x115c > [ 75.148356] softirqs last enabled at (0): [<ffffff90080e65d8>] copy_process+0x398/0x115c > [ 75.148364] softirqs last disabled at (0): [<0000000000000000>] (null) > [ 75.148372] ---[ end trace 588bf529451e3531 ]--- > > Reported-by: Anand K Mistry <amistry@chromium.org> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 8 ++++++++ > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 8 ++++++++ > 2 files changed, 16 insertions(+) > > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > index 97a1b6664c20..3bbd0bac56d6 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > @@ -242,6 +242,14 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > mtk_v4l2_err("[VPU] vpu device in not ready"); > return -EPROBE_DEFER; > } > + if (!pdev->dev.dma_parms) { > + pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, > + sizeof(*pdev->dev.dma_parms), > + GFP_KERNEL); > + if (!pdev->dev.dma_parms) > + return -ENOMEM; > + } > + dma_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); > > vpu_wdt_reg_handler(dev->vpu_plat_dev, mtk_vcodec_dec_reset_handler, > dev, VPU_RST_DEC); > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c > index 4d31f1ed113f..ff4a87485d69 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c > @@ -249,6 +249,14 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > mtk_v4l2_err("[VPU] vpu device in not ready"); > return -EPROBE_DEFER; > } > + if (!pdev->dev.dma_parms) { > + pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, > + sizeof(*pdev->dev.dma_parms), > + GFP_KERNEL); > + if (!pdev->dev.dma_parms) > + return -ENOMEM; > + } > + dma_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); > > vpu_wdt_reg_handler(dev->vpu_plat_dev, mtk_vcodec_enc_reset_handler, > dev, VPU_RST_ENC);
On 2020-08-21 05:14, Hsin-Yi Wang wrote: > Set dma max segment size for encoder and decoder driver. > > Fix following warning with CONFIG_DMA_API_DEBUG_SG=y > > [ 75.147825] ------------[ cut here ]------------ > [ 75.147844] mtk-vcodec-enc 19002000.vcodec: DMA-API: mapping sg segment longer than device claims to support [len=983040] [max=65536] > [ 75.147876] WARNING: CPU: 2 PID: 4069 at kernel/dma/debug.c:1302 debug_dma_map_sg+0x1a8/0x2c4 > ... > [ 75.148139] Call trace: > [ 75.148149] debug_dma_map_sg+0x1a8/0x2c4 > [ 75.148165] vb2_dc_get_userptr+0x228/0x364 [videobuf2_dma_contig] > [ 75.148178] __buf_prepare+0x3ac/0x8c0 [videobuf2_common] > [ 75.148188] vb2_core_qbuf+0xa4/0x58c [videobuf2_common] > [ 75.148199] vb2_qbuf+0x88/0xe4 [videobuf2_v4l2] > [ 75.148211] v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem] > [ 75.148221] vidioc_venc_qbuf+0x3c/0x70 [mtk_vcodec_enc] > [ 75.148234] v4l_qbuf+0x48/0x58 > [ 75.148242] __video_do_ioctl+0x200/0x37c > [ 75.148250] video_usercopy+0x360/0x834 > [ 75.148259] video_ioctl2+0x38/0x48 > [ 75.148267] v4l2_ioctl+0x6c/0x80 > [ 75.148276] do_video_ioctl+0xefc/0x4b70 > [ 75.148284] v4l2_compat_ioctl32+0x5c/0xcc > [ 75.148294] __arm64_compat_sys_ioctl+0xf4/0x240 > [ 75.148304] el0_svc_common+0xac/0x198 > [ 75.148312] el0_svc_compat_handler+0x2c/0x40 > [ 75.148321] el0_svc_compat+0x8/0x18 > [ 75.148328] irq event stamp: 0 > [ 75.148337] hardirqs last enabled at (0): [<0000000000000000>] (null) > [ 75.148347] hardirqs last disabled at (0): [<ffffff90080e65c0>] copy_process+0x380/0x115c > [ 75.148356] softirqs last enabled at (0): [<ffffff90080e65d8>] copy_process+0x398/0x115c > [ 75.148364] softirqs last disabled at (0): [<0000000000000000>] (null) > [ 75.148372] ---[ end trace 588bf529451e3531 ]--- > > Reported-by: Anand K Mistry <amistry@chromium.org> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 8 ++++++++ > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 8 ++++++++ > 2 files changed, 16 insertions(+) > > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > index 97a1b6664c20..3bbd0bac56d6 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > @@ -242,6 +242,14 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > mtk_v4l2_err("[VPU] vpu device in not ready"); > return -EPROBE_DEFER; > } > + if (!pdev->dev.dma_parms) { > + pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, > + sizeof(*pdev->dev.dma_parms), > + GFP_KERNEL); > + if (!pdev->dev.dma_parms) > + return -ENOMEM; > + } Since 9495b7e92f71, dma_parms is included in the platform_device itself and always set, so you can drop these allocation paths. > + dma_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); The segment size is simply a size, not a bitmask, so UINT_MAX would be more semantically appropriate. Robin. > vpu_wdt_reg_handler(dev->vpu_plat_dev, mtk_vcodec_dec_reset_handler, > dev, VPU_RST_DEC); > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c > index 4d31f1ed113f..ff4a87485d69 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c > @@ -249,6 +249,14 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > mtk_v4l2_err("[VPU] vpu device in not ready"); > return -EPROBE_DEFER; > } > + if (!pdev->dev.dma_parms) { > + pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, > + sizeof(*pdev->dev.dma_parms), > + GFP_KERNEL); > + if (!pdev->dev.dma_parms) > + return -ENOMEM; > + } > + dma_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); > > vpu_wdt_reg_handler(dev->vpu_plat_dev, mtk_vcodec_enc_reset_handler, > dev, VPU_RST_ENC); >
On Wed, Sep 2, 2020 at 10:25 PM Robin Murphy <robin.murphy@arm.com> wrote: > > On 2020-08-21 05:14, Hsin-Yi Wang wrote: > > Set dma max segment size for encoder and decoder driver. > > > > Fix following warning with CONFIG_DMA_API_DEBUG_SG=y > > > > [ 75.147825] ------------[ cut here ]------------ > > [ 75.147844] mtk-vcodec-enc 19002000.vcodec: DMA-API: mapping sg segment longer than device claims to support [len=983040] [max=65536] > > [ 75.147876] WARNING: CPU: 2 PID: 4069 at kernel/dma/debug.c:1302 debug_dma_map_sg+0x1a8/0x2c4 > > ... > > [ 75.148139] Call trace: > > [ 75.148149] debug_dma_map_sg+0x1a8/0x2c4 > > [ 75.148165] vb2_dc_get_userptr+0x228/0x364 [videobuf2_dma_contig] > > [ 75.148178] __buf_prepare+0x3ac/0x8c0 [videobuf2_common] > > [ 75.148188] vb2_core_qbuf+0xa4/0x58c [videobuf2_common] > > [ 75.148199] vb2_qbuf+0x88/0xe4 [videobuf2_v4l2] > > [ 75.148211] v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem] > > [ 75.148221] vidioc_venc_qbuf+0x3c/0x70 [mtk_vcodec_enc] > > [ 75.148234] v4l_qbuf+0x48/0x58 > > [ 75.148242] __video_do_ioctl+0x200/0x37c > > [ 75.148250] video_usercopy+0x360/0x834 > > [ 75.148259] video_ioctl2+0x38/0x48 > > [ 75.148267] v4l2_ioctl+0x6c/0x80 > > [ 75.148276] do_video_ioctl+0xefc/0x4b70 > > [ 75.148284] v4l2_compat_ioctl32+0x5c/0xcc > > [ 75.148294] __arm64_compat_sys_ioctl+0xf4/0x240 > > [ 75.148304] el0_svc_common+0xac/0x198 > > [ 75.148312] el0_svc_compat_handler+0x2c/0x40 > > [ 75.148321] el0_svc_compat+0x8/0x18 > > [ 75.148328] irq event stamp: 0 > > [ 75.148337] hardirqs last enabled at (0): [<0000000000000000>] (null) > > [ 75.148347] hardirqs last disabled at (0): [<ffffff90080e65c0>] copy_process+0x380/0x115c > > [ 75.148356] softirqs last enabled at (0): [<ffffff90080e65d8>] copy_process+0x398/0x115c > > [ 75.148364] softirqs last disabled at (0): [<0000000000000000>] (null) > > [ 75.148372] ---[ end trace 588bf529451e3531 ]--- > > > > Reported-by: Anand K Mistry <amistry@chromium.org> > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > > --- > > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 8 ++++++++ > > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 8 ++++++++ > > 2 files changed, 16 insertions(+) > > > > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > > index 97a1b6664c20..3bbd0bac56d6 100644 > > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > > @@ -242,6 +242,14 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > > mtk_v4l2_err("[VPU] vpu device in not ready"); > > return -EPROBE_DEFER; > > } > > + if (!pdev->dev.dma_parms) { > > + pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, > > + sizeof(*pdev->dev.dma_parms), > > + GFP_KERNEL); > > + if (!pdev->dev.dma_parms) > > + return -ENOMEM; > > + } > > Since 9495b7e92f71, dma_parms is included in the platform_device itself > and always set, so you can drop these allocation paths. > > > + dma_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); > > The segment size is simply a size, not a bitmask, so UINT_MAX would be > more semantically appropriate. > > Robin. > Thanks. since this patch is already in media tree: https://git.linuxtv.org/media_tree.git/commit/?id=13483fc2f20f0e2db7ba9c39b095ac7ea46f8de8, I'll send a patch to modify this.
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c index 97a1b6664c20..3bbd0bac56d6 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c @@ -242,6 +242,14 @@ static int mtk_vcodec_probe(struct platform_device *pdev) mtk_v4l2_err("[VPU] vpu device in not ready"); return -EPROBE_DEFER; } + if (!pdev->dev.dma_parms) { + pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, + sizeof(*pdev->dev.dma_parms), + GFP_KERNEL); + if (!pdev->dev.dma_parms) + return -ENOMEM; + } + dma_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); vpu_wdt_reg_handler(dev->vpu_plat_dev, mtk_vcodec_dec_reset_handler, dev, VPU_RST_DEC); diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c index 4d31f1ed113f..ff4a87485d69 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c @@ -249,6 +249,14 @@ static int mtk_vcodec_probe(struct platform_device *pdev) mtk_v4l2_err("[VPU] vpu device in not ready"); return -EPROBE_DEFER; } + if (!pdev->dev.dma_parms) { + pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, + sizeof(*pdev->dev.dma_parms), + GFP_KERNEL); + if (!pdev->dev.dma_parms) + return -ENOMEM; + } + dma_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); vpu_wdt_reg_handler(dev->vpu_plat_dev, mtk_vcodec_enc_reset_handler, dev, VPU_RST_ENC);
Set dma max segment size for encoder and decoder driver. Fix following warning with CONFIG_DMA_API_DEBUG_SG=y [ 75.147825] ------------[ cut here ]------------ [ 75.147844] mtk-vcodec-enc 19002000.vcodec: DMA-API: mapping sg segment longer than device claims to support [len=983040] [max=65536] [ 75.147876] WARNING: CPU: 2 PID: 4069 at kernel/dma/debug.c:1302 debug_dma_map_sg+0x1a8/0x2c4 ... [ 75.148139] Call trace: [ 75.148149] debug_dma_map_sg+0x1a8/0x2c4 [ 75.148165] vb2_dc_get_userptr+0x228/0x364 [videobuf2_dma_contig] [ 75.148178] __buf_prepare+0x3ac/0x8c0 [videobuf2_common] [ 75.148188] vb2_core_qbuf+0xa4/0x58c [videobuf2_common] [ 75.148199] vb2_qbuf+0x88/0xe4 [videobuf2_v4l2] [ 75.148211] v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem] [ 75.148221] vidioc_venc_qbuf+0x3c/0x70 [mtk_vcodec_enc] [ 75.148234] v4l_qbuf+0x48/0x58 [ 75.148242] __video_do_ioctl+0x200/0x37c [ 75.148250] video_usercopy+0x360/0x834 [ 75.148259] video_ioctl2+0x38/0x48 [ 75.148267] v4l2_ioctl+0x6c/0x80 [ 75.148276] do_video_ioctl+0xefc/0x4b70 [ 75.148284] v4l2_compat_ioctl32+0x5c/0xcc [ 75.148294] __arm64_compat_sys_ioctl+0xf4/0x240 [ 75.148304] el0_svc_common+0xac/0x198 [ 75.148312] el0_svc_compat_handler+0x2c/0x40 [ 75.148321] el0_svc_compat+0x8/0x18 [ 75.148328] irq event stamp: 0 [ 75.148337] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 75.148347] hardirqs last disabled at (0): [<ffffff90080e65c0>] copy_process+0x380/0x115c [ 75.148356] softirqs last enabled at (0): [<ffffff90080e65d8>] copy_process+0x398/0x115c [ 75.148364] softirqs last disabled at (0): [<0000000000000000>] (null) [ 75.148372] ---[ end trace 588bf529451e3531 ]--- Reported-by: Anand K Mistry <amistry@chromium.org> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 8 ++++++++ drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 8 ++++++++ 2 files changed, 16 insertions(+)