| Message ID | 20200902031359.6703-4-jonathan@marek.ca (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | SM8150 and SM8250 videocc drivers | expand |
On Tue, 01 Sep 2020 23:13:53 -0400, Jonathan Marek wrote: > Add device tree bindings for video clock controller for SM8250 SoCs. > > Signed-off-by: Jonathan Marek <jonathan@marek.ca> > --- > .../bindings/clock/qcom,videocc.yaml | 6 ++- > .../dt-bindings/clock/qcom,videocc-sm8250.h | 42 +++++++++++++++++++ > 2 files changed, 47 insertions(+), 1 deletion(-) > create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8250.h > My bot found errors running 'make dt_binding_check' on your patch: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,videocc.example.dt.yaml: clock-controller@ab00000: clocks: [[4294967295, 0]] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,videocc.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,videocc.example.dt.yaml: clock-controller@ab00000: clock-names: ['bi_tcxo'] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,videocc.yaml See https://patchwork.ozlabs.org/patch/1355500 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
On Tue, Sep 01, 2020 at 11:13:53PM -0400, Jonathan Marek wrote: > Add device tree bindings for video clock controller for SM8250 SoCs. WARNING: please, no space before tabs #182: FILE: include/dt-bindings/clock/qcom,videocc-sm8250.h:37: +#define MVS0C_GDSC ^I^I^I0$ WARNING: please, no space before tabs #183: FILE: include/dt-bindings/clock/qcom,videocc-sm8250.h:38: +#define MVS1C_GDSC ^I^I^I1$ WARNING: please, no space before tabs #184: FILE: include/dt-bindings/clock/qcom,videocc-sm8250.h:39: +#define MVS0_GDSC ^I^I^I2$ WARNING: please, no space before tabs #185: FILE: include/dt-bindings/clock/qcom,videocc-sm8250.h:40: +#define MVS1_GDSC ^I^I^I3$ total: 0 errors, 4 warnings, 73 lines checked > > Signed-off-by: Jonathan Marek <jonathan@marek.ca> > --- > .../bindings/clock/qcom,videocc.yaml | 6 ++- > .../dt-bindings/clock/qcom,videocc-sm8250.h | 42 +++++++++++++++++++ > 2 files changed, 47 insertions(+), 1 deletion(-) > create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8250.h > > diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml > index d04f5bd28dde..757837e260a2 100644 > --- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml > +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml > @@ -11,12 +11,13 @@ maintainers: > > description: | > Qualcomm video clock control module which supports the clocks, resets and > - power domains on SDM845/SC7180/SM8150. > + power domains on SDM845/SC7180/SM8150/SM8250. > > See also: > dt-bindings/clock/qcom,videocc-sdm845.h > dt-bindings/clock/qcom,videocc-sc7180.h > dt-bindings/clock/qcom,videocc-sm8150.h > + dt-bindings/clock/qcom,videocc-sm8250.h > > properties: > compatible: > @@ -24,14 +25,17 @@ properties: > - qcom,sdm845-videocc > - qcom,sc7180-videocc > - qcom,sm8150-videocc > + - qcom,sm8250-videocc > > clocks: > items: > - description: Board XO source > + - description: Board XO source, always-on (required by sm8250 only) > > clock-names: > items: > - const: bi_tcxo > + - const: bi_tcxo_ao > > '#clock-cells': > const: 1 > diff --git a/include/dt-bindings/clock/qcom,videocc-sm8250.h b/include/dt-bindings/clock/qcom,videocc-sm8250.h > new file mode 100644 > index 000000000000..4c44f9c468db > --- /dev/null > +++ b/include/dt-bindings/clock/qcom,videocc-sm8250.h > @@ -0,0 +1,42 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8250_H > +#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8250_H > + > +/* VIDEO_CC clocks */ > +#define VIDEO_CC_AHB_CLK 0 > +#define VIDEO_CC_AHB_CLK_SRC 1 > +#define VIDEO_CC_MVS0_CLK 2 > +#define VIDEO_CC_MVS0_CLK_SRC 3 > +#define VIDEO_CC_MVS0_DIV_CLK_SRC 4 > +#define VIDEO_CC_MVS0C_CLK 5 > +#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC 6 > +#define VIDEO_CC_MVS1_CLK 7 > +#define VIDEO_CC_MVS1_CLK_SRC 8 > +#define VIDEO_CC_MVS1_DIV2_CLK 9 > +#define VIDEO_CC_MVS1_DIV_CLK_SRC 10 > +#define VIDEO_CC_MVS1C_CLK 11 > +#define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 12 > +#define VIDEO_CC_XO_CLK 13 > +#define VIDEO_CC_XO_CLK_SRC 14 > +#define VIDEO_CC_PLL0 15 > +#define VIDEO_CC_PLL1 16 > + > +/* VIDEO_CC resets */ > +#define VIDEO_CC_CVP_INTERFACE_BCR 0 > +#define VIDEO_CC_CVP_MVS0_BCR 1 > +#define VIDEO_CC_MVS0C_CLK_ARES 2 > +#define VIDEO_CC_CVP_MVS0C_BCR 3 > +#define VIDEO_CC_CVP_MVS1_BCR 4 > +#define VIDEO_CC_MVS1C_CLK_ARES 5 > +#define VIDEO_CC_CVP_MVS1C_BCR 6 > + > +#define MVS0C_GDSC 0 > +#define MVS1C_GDSC 1 > +#define MVS0_GDSC 2 > +#define MVS1_GDSC 3 > + > +#endif > -- > 2.26.1 >
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml index d04f5bd28dde..757837e260a2 100644 --- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml @@ -11,12 +11,13 @@ maintainers: description: | Qualcomm video clock control module which supports the clocks, resets and - power domains on SDM845/SC7180/SM8150. + power domains on SDM845/SC7180/SM8150/SM8250. See also: dt-bindings/clock/qcom,videocc-sdm845.h dt-bindings/clock/qcom,videocc-sc7180.h dt-bindings/clock/qcom,videocc-sm8150.h + dt-bindings/clock/qcom,videocc-sm8250.h properties: compatible: @@ -24,14 +25,17 @@ properties: - qcom,sdm845-videocc - qcom,sc7180-videocc - qcom,sm8150-videocc + - qcom,sm8250-videocc clocks: items: - description: Board XO source + - description: Board XO source, always-on (required by sm8250 only) clock-names: items: - const: bi_tcxo + - const: bi_tcxo_ao '#clock-cells': const: 1 diff --git a/include/dt-bindings/clock/qcom,videocc-sm8250.h b/include/dt-bindings/clock/qcom,videocc-sm8250.h new file mode 100644 index 000000000000..4c44f9c468db --- /dev/null +++ b/include/dt-bindings/clock/qcom,videocc-sm8250.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8250_H +#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8250_H + +/* VIDEO_CC clocks */ +#define VIDEO_CC_AHB_CLK 0 +#define VIDEO_CC_AHB_CLK_SRC 1 +#define VIDEO_CC_MVS0_CLK 2 +#define VIDEO_CC_MVS0_CLK_SRC 3 +#define VIDEO_CC_MVS0_DIV_CLK_SRC 4 +#define VIDEO_CC_MVS0C_CLK 5 +#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC 6 +#define VIDEO_CC_MVS1_CLK 7 +#define VIDEO_CC_MVS1_CLK_SRC 8 +#define VIDEO_CC_MVS1_DIV2_CLK 9 +#define VIDEO_CC_MVS1_DIV_CLK_SRC 10 +#define VIDEO_CC_MVS1C_CLK 11 +#define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 12 +#define VIDEO_CC_XO_CLK 13 +#define VIDEO_CC_XO_CLK_SRC 14 +#define VIDEO_CC_PLL0 15 +#define VIDEO_CC_PLL1 16 + +/* VIDEO_CC resets */ +#define VIDEO_CC_CVP_INTERFACE_BCR 0 +#define VIDEO_CC_CVP_MVS0_BCR 1 +#define VIDEO_CC_MVS0C_CLK_ARES 2 +#define VIDEO_CC_CVP_MVS0C_BCR 3 +#define VIDEO_CC_CVP_MVS1_BCR 4 +#define VIDEO_CC_MVS1C_CLK_ARES 5 +#define VIDEO_CC_CVP_MVS1C_BCR 6 + +#define MVS0C_GDSC 0 +#define MVS1C_GDSC 1 +#define MVS0_GDSC 2 +#define MVS1_GDSC 3 + +#endif
Add device tree bindings for video clock controller for SM8250 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> --- .../bindings/clock/qcom,videocc.yaml | 6 ++- .../dt-bindings/clock/qcom,videocc-sm8250.h | 42 +++++++++++++++++++ 2 files changed, 47 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8250.h