| Message ID | 20200907161141.31034-6-krzk@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | ARM: dts: s5pv210: Cleanup - dtschema warnings | expand |
DMA still works for me on the Galaxy S. Tested-by: Jonathan Bakker <xc-racer2@live.ca> Thanks, Jonathan On 2020-09-07 9:11 a.m., Krzysztof Kozlowski wrote: > There is no need to keep DMA controller nodes under AMBA bus node. > Remove the "amba" node to fix dtschema warnings like: > > amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++------------------- > 1 file changed, 21 insertions(+), 28 deletions(-) > > diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi > index 1b0ee884e91d..84e4447931de 100644 > --- a/arch/arm/boot/dts/s5pv210.dtsi > +++ b/arch/arm/boot/dts/s5pv210.dtsi > @@ -128,35 +128,28 @@ > }; > }; > > - amba { > - #address-cells = <1>; > - #size-cells = <1>; > - compatible = "simple-bus"; > - ranges; > - > - pdma0: dma@e0900000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0xe0900000 0x1000>; > - interrupt-parent = <&vic0>; > - interrupts = <19>; > - clocks = <&clocks CLK_PDMA0>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > + pdma0: dma@e0900000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0xe0900000 0x1000>; > + interrupt-parent = <&vic0>; > + interrupts = <19>; > + clocks = <&clocks CLK_PDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > > - pdma1: dma@e0a00000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0xe0a00000 0x1000>; > - interrupt-parent = <&vic0>; > - interrupts = <20>; > - clocks = <&clocks CLK_PDMA1>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > + pdma1: dma@e0a00000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0xe0a00000 0x1000>; > + interrupt-parent = <&vic0>; > + interrupts = <20>; > + clocks = <&clocks CLK_PDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > }; > > adc: adc@e1700000 { >
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 1b0ee884e91d..84e4447931de 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -128,35 +128,28 @@ }; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - pdma0: dma@e0900000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xe0900000 0x1000>; - interrupt-parent = <&vic0>; - interrupts = <19>; - clocks = <&clocks CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: dma@e0900000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0900000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <19>; + clocks = <&clocks CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; - pdma1: dma@e0a00000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xe0a00000 0x1000>; - interrupt-parent = <&vic0>; - interrupts = <20>; - clocks = <&clocks CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma1: dma@e0a00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0a00000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <20>; + clocks = <&clocks CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; adc: adc@e1700000 {
There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like: amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++------------------- 1 file changed, 21 insertions(+), 28 deletions(-)