| Message ID | 20200909105046.160991-1-andre.przywara@arm.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v2] dt-bindings: watchdog: sp-805: Convert to Json-schema | expand |
On 09-09-20, 11:50, Andre Przywara wrote: > Convert the ARM SP-805 watchdog IP DT binding over to Json-schema. > > A straight-forward conversion, but the requirement for providing two > clocks got strengthened from "should" to "must". > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > --- > Hi, > > this is just the bindings conversion patch, updated to address Rob's > comments: > - Remove redundant primecell.yaml inclusion > - Reference watchdog.yaml > - Drop now redundant timeout-sec property > - Add unevaluatedProperties > > The DT fixes are independent and now partly already queued, so I am > posting this separately. > > Cheers, > Andre > > .../bindings/watchdog/arm,sp805.txt | 32 --------- > .../bindings/watchdog/arm,sp805.yaml | 71 +++++++++++++++++++ > 2 files changed, 71 insertions(+), 32 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt > create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml > > diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt > deleted file mode 100644 > index bee6f1f0e41b..000000000000 > --- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt > +++ /dev/null > @@ -1,32 +0,0 @@ > -ARM AMBA Primecell SP805 Watchdog > - > -SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that > -can be used to identify the peripheral type, vendor, and revision. > -This value can be used for driver matching. > - > -As SP805 WDT is a primecell IP, it follows the base bindings specified in > -'arm/primecell.txt' > - > -Required properties: > -- compatible: Should be "arm,sp805" & "arm,primecell" > -- reg: Should contain location and length for watchdog timer register > -- clocks: Clocks driving the watchdog timer hardware. This list should be > - 2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk > - wdog_clk can be equal to or be a sub-multiple of the apb_pclk > - frequency > -- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the > - second one > - > -Optional properties: > -- interrupts: Should specify WDT interrupt number > -- timeout-sec: Should specify default WDT timeout in seconds. If unset, the > - default timeout is determined by the driver > - > -Example: > - watchdog@66090000 { > - compatible = "arm,sp805", "arm,primecell"; > - reg = <0x66090000 0x1000>; > - interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&wdt_clk>, <&apb_pclk>; > - clock-names = "wdog_clk", "apb_pclk"; > - }; > diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml > new file mode 100644 > index 000000000000..a69cac8ec208 > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml > @@ -0,0 +1,71 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ARM AMBA Primecell SP805 Watchdog > + > +maintainers: > + - Viresh Kumar <vireshk@kernel.org> > + > +description: |+ > + The Arm SP805 IP implements a watchdog device, which triggers an interrupt > + after a configurable time period. If that interrupt has not been serviced > + when the next interrupt would be triggered, the reset signal is asserted. > + > +allOf: > + - $ref: /schemas/watchdog/watchdog.yaml# > + > +# Need a custom select here or 'arm,primecell' will match on lots of nodes > +select: > + properties: > + compatible: > + contains: > + const: arm,sp805 > + required: > + - compatible > + > +properties: > + compatible: > + items: > + - const: arm,sp805 > + - const: arm,primecell > + > + interrupts: > + maxItems: 1 > + > + reg: > + maxItems: 1 > + > + clocks: > + description: | > + Clocks driving the watchdog timer hardware. The first clock is used > + for the actual watchdog counter. The second clock drives the register > + interface. > + minItems: 2 > + maxItems: 2 > + > + clock-names: > + items: > + - const: wdog_clk > + - const: apb_pclk > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + watchdog@66090000 { > + compatible = "arm,sp805", "arm,primecell"; > + reg = <0x66090000 0x1000>; > + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&wdt_clk>, <&apb_pclk>; > + clock-names = "wdog_clk", "apb_pclk"; > + }; Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
On Wed, 09 Sep 2020 11:50:46 +0100, Andre Przywara wrote: > Convert the ARM SP-805 watchdog IP DT binding over to Json-schema. > > A straight-forward conversion, but the requirement for providing two > clocks got strengthened from "should" to "must". > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > --- > Hi, > > this is just the bindings conversion patch, updated to address Rob's > comments: > - Remove redundant primecell.yaml inclusion > - Reference watchdog.yaml > - Drop now redundant timeout-sec property > - Add unevaluatedProperties > > The DT fixes are independent and now partly already queued, so I am > posting this separately. > > Cheers, > Andre > > .../bindings/watchdog/arm,sp805.txt | 32 --------- > .../bindings/watchdog/arm,sp805.yaml | 71 +++++++++++++++++++ > 2 files changed, 71 insertions(+), 32 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt > create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml > Applied, thanks!
diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt deleted file mode 100644 index bee6f1f0e41b..000000000000 --- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt +++ /dev/null @@ -1,32 +0,0 @@ -ARM AMBA Primecell SP805 Watchdog - -SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that -can be used to identify the peripheral type, vendor, and revision. -This value can be used for driver matching. - -As SP805 WDT is a primecell IP, it follows the base bindings specified in -'arm/primecell.txt' - -Required properties: -- compatible: Should be "arm,sp805" & "arm,primecell" -- reg: Should contain location and length for watchdog timer register -- clocks: Clocks driving the watchdog timer hardware. This list should be - 2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk - wdog_clk can be equal to or be a sub-multiple of the apb_pclk - frequency -- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the - second one - -Optional properties: -- interrupts: Should specify WDT interrupt number -- timeout-sec: Should specify default WDT timeout in seconds. If unset, the - default timeout is determined by the driver - -Example: - watchdog@66090000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x66090000 0x1000>; - interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&wdt_clk>, <&apb_pclk>; - clock-names = "wdog_clk", "apb_pclk"; - }; diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml new file mode 100644 index 000000000000..a69cac8ec208 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM AMBA Primecell SP805 Watchdog + +maintainers: + - Viresh Kumar <vireshk@kernel.org> + +description: |+ + The Arm SP805 IP implements a watchdog device, which triggers an interrupt + after a configurable time period. If that interrupt has not been serviced + when the next interrupt would be triggered, the reset signal is asserted. + +allOf: + - $ref: /schemas/watchdog/watchdog.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + const: arm,sp805 + required: + - compatible + +properties: + compatible: + items: + - const: arm,sp805 + - const: arm,primecell + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + clocks: + description: | + Clocks driving the watchdog timer hardware. The first clock is used + for the actual watchdog counter. The second clock drives the register + interface. + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: wdog_clk + - const: apb_pclk + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + watchdog@66090000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x66090000 0x1000>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wdt_clk>, <&apb_pclk>; + clock-names = "wdog_clk", "apb_pclk"; + };
Convert the ARM SP-805 watchdog IP DT binding over to Json-schema. A straight-forward conversion, but the requirement for providing two clocks got strengthened from "should" to "must". Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- Hi, this is just the bindings conversion patch, updated to address Rob's comments: - Remove redundant primecell.yaml inclusion - Reference watchdog.yaml - Drop now redundant timeout-sec property - Add unevaluatedProperties The DT fixes are independent and now partly already queued, so I am posting this separately. Cheers, Andre .../bindings/watchdog/arm,sp805.txt | 32 --------- .../bindings/watchdog/arm,sp805.yaml | 71 +++++++++++++++++++ 2 files changed, 71 insertions(+), 32 deletions(-) delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml