diff mbox series

[v6,6/6] PCI: uniphier: Add error message when failed to get phy

Message ID 1596795922-705-7-git-send-email-hayashi.kunihiko@socionext.com (mailing list archive)
State Changes Requested, archived
Delegated to: Lorenzo Pieralisi
Headers show
Series PCI: uniphier: Add features for UniPhier PCIe host controller | expand

Commit Message

Kunihiko Hayashi Aug. 7, 2020, 10:25 a.m. UTC
Even if phy driver doesn't probe, the error message can't be distinguished
from other errors. This displays error message caused by the phy driver
explicitly.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/pci/controller/dwc/pcie-uniphier.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Comments

Rob Herring Aug. 17, 2020, 4:39 p.m. UTC | #1
On Fri, Aug 7, 2020 at 4:25 AM Kunihiko Hayashi
<hayashi.kunihiko@socionext.com> wrote:
>
> Even if phy driver doesn't probe, the error message can't be distinguished
> from other errors. This displays error message caused by the phy driver
> explicitly.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  drivers/pci/controller/dwc/pcie-uniphier.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
> index 93ef608..7c8721e 100644
> --- a/drivers/pci/controller/dwc/pcie-uniphier.c
> +++ b/drivers/pci/controller/dwc/pcie-uniphier.c
> @@ -489,8 +489,12 @@ static int uniphier_pcie_probe(struct platform_device *pdev)
>                 return PTR_ERR(priv->rst);
>
>         priv->phy = devm_phy_optional_get(dev, "pcie-phy");

The point of the optional variant vs. devm_phy_get() is whether or not
you get an error message. So shouldn't you switch to devm_phy_get
instead?

> -       if (IS_ERR(priv->phy))
> -               return PTR_ERR(priv->phy);
> +       if (IS_ERR(priv->phy)) {
> +               ret = PTR_ERR(priv->phy);
> +               if (ret != -EPROBE_DEFER)
> +                       dev_err(dev, "Failed to get phy (%d)\n", ret);
> +               return ret;
> +       }
>
>         platform_set_drvdata(pdev, priv);
>
> --
> 2.7.4
>
Kunihiko Hayashi Aug. 21, 2020, 7:05 a.m. UTC | #2
On 2020/08/18 1:39, Rob Herring wrote:
> On Fri, Aug 7, 2020 at 4:25 AM Kunihiko Hayashi
> <hayashi.kunihiko@socionext.com> wrote:
>>
>> Even if phy driver doesn't probe, the error message can't be distinguished
>> from other errors. This displays error message caused by the phy driver
>> explicitly.
>>
>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>> ---
>>   drivers/pci/controller/dwc/pcie-uniphier.c | 8 ++++++--
>>   1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
>> index 93ef608..7c8721e 100644
>> --- a/drivers/pci/controller/dwc/pcie-uniphier.c
>> +++ b/drivers/pci/controller/dwc/pcie-uniphier.c
>> @@ -489,8 +489,12 @@ static int uniphier_pcie_probe(struct platform_device *pdev)
>>                  return PTR_ERR(priv->rst);
>>
>>          priv->phy = devm_phy_optional_get(dev, "pcie-phy");
> 
> The point of the optional variant vs. devm_phy_get() is whether or not
> you get an error message. So shouldn't you switch to devm_phy_get
> instead?
> 
>> -       if (IS_ERR(priv->phy))
>> -               return PTR_ERR(priv->phy);
>> +       if (IS_ERR(priv->phy)) {
>> +               ret = PTR_ERR(priv->phy);
>> +               if (ret != -EPROBE_DEFER)
>> +                       dev_err(dev, "Failed to get phy (%d)\n", ret);
>> +               return ret;
>> +       }

The 'phys' property is optional, so if there isn't 'phys' in the PCIe node,
devm_phy_get() returns -ENODEV, and devm_phy_optional_get() returns NULL.

When devm_phy_optional_get() replaces devm_phy_get(),
condition for displaying an error message changes to:

    (ret != -EPROBE_DEFER && ret != -ENODEV)

This won't be simple, but should it be replaced?

Thank you,

---
Best Regards
Kunihiko Hayashi
Rob Herring Sept. 3, 2020, 10:25 p.m. UTC | #3
On Fri, Aug 21, 2020 at 1:05 AM Kunihiko Hayashi
<hayashi.kunihiko@socionext.com> wrote:
>
> On 2020/08/18 1:39, Rob Herring wrote:
> > On Fri, Aug 7, 2020 at 4:25 AM Kunihiko Hayashi
> > <hayashi.kunihiko@socionext.com> wrote:
> >>
> >> Even if phy driver doesn't probe, the error message can't be distinguished
> >> from other errors. This displays error message caused by the phy driver
> >> explicitly.
> >>
> >> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> >> ---
> >>   drivers/pci/controller/dwc/pcie-uniphier.c | 8 ++++++--
> >>   1 file changed, 6 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
> >> index 93ef608..7c8721e 100644
> >> --- a/drivers/pci/controller/dwc/pcie-uniphier.c
> >> +++ b/drivers/pci/controller/dwc/pcie-uniphier.c
> >> @@ -489,8 +489,12 @@ static int uniphier_pcie_probe(struct platform_device *pdev)
> >>                  return PTR_ERR(priv->rst);
> >>
> >>          priv->phy = devm_phy_optional_get(dev, "pcie-phy");
> >
> > The point of the optional variant vs. devm_phy_get() is whether or not
> > you get an error message. So shouldn't you switch to devm_phy_get
> > instead?
> >
> >> -       if (IS_ERR(priv->phy))
> >> -               return PTR_ERR(priv->phy);
> >> +       if (IS_ERR(priv->phy)) {
> >> +               ret = PTR_ERR(priv->phy);
> >> +               if (ret != -EPROBE_DEFER)
> >> +                       dev_err(dev, "Failed to get phy (%d)\n", ret);
> >> +               return ret;
> >> +       }
>
> The 'phys' property is optional, so if there isn't 'phys' in the PCIe node,
> devm_phy_get() returns -ENODEV, and devm_phy_optional_get() returns NULL.
>
> When devm_phy_optional_get() replaces devm_phy_get(),
> condition for displaying an error message changes to:
>
>     (ret != -EPROBE_DEFER && ret != -ENODEV)
>
> This won't be simple, but should it be replaced?

Nevermind. I was thinking we had some error prints for the optional
vs. non-optional variants.

Rob
Kunihiko Hayashi Sept. 7, 2020, 4:09 p.m. UTC | #4
Hi Rob,

On 2020/09/04 7:25, Rob Herring wrote:
> On Fri, Aug 21, 2020 at 1:05 AM Kunihiko Hayashi
> <hayashi.kunihiko@socionext.com> wrote:
>>
>> On 2020/08/18 1:39, Rob Herring wrote:
>>> On Fri, Aug 7, 2020 at 4:25 AM Kunihiko Hayashi
>>> <hayashi.kunihiko@socionext.com> wrote:
>>>>
>>>> Even if phy driver doesn't probe, the error message can't be distinguished
>>>> from other errors. This displays error message caused by the phy driver
>>>> explicitly.
>>>>
>>>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>>>> ---
>>>>    drivers/pci/controller/dwc/pcie-uniphier.c | 8 ++++++--
>>>>    1 file changed, 6 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
>>>> index 93ef608..7c8721e 100644
>>>> --- a/drivers/pci/controller/dwc/pcie-uniphier.c
>>>> +++ b/drivers/pci/controller/dwc/pcie-uniphier.c
>>>> @@ -489,8 +489,12 @@ static int uniphier_pcie_probe(struct platform_device *pdev)
>>>>                   return PTR_ERR(priv->rst);
>>>>
>>>>           priv->phy = devm_phy_optional_get(dev, "pcie-phy");
>>>
>>> The point of the optional variant vs. devm_phy_get() is whether or not
>>> you get an error message. So shouldn't you switch to devm_phy_get
>>> instead?
>>>
>>>> -       if (IS_ERR(priv->phy))
>>>> -               return PTR_ERR(priv->phy);
>>>> +       if (IS_ERR(priv->phy)) {
>>>> +               ret = PTR_ERR(priv->phy);
>>>> +               if (ret != -EPROBE_DEFER)
>>>> +                       dev_err(dev, "Failed to get phy (%d)\n", ret);
>>>> +               return ret;
>>>> +       }
>>
>> The 'phys' property is optional, so if there isn't 'phys' in the PCIe node,
>> devm_phy_get() returns -ENODEV, and devm_phy_optional_get() returns NULL.
>>
>> When devm_phy_optional_get() replaces devm_phy_get(),
>> condition for displaying an error message changes to:
>>
>>      (ret != -EPROBE_DEFER && ret != -ENODEV)
>>
>> This won't be simple, but should it be replaced?
> 
> Nevermind. I was thinking we had some error prints for the optional
> vs. non-optional variants.
I understand.
As long as this phy is "optional", this doesn't need to print error message.
Once I cancel this patch, and leave the phy as "optional".

Thank you,

---
Best Regards
Kunihiko Hayashi
Rob Herring Sept. 10, 2020, 6:24 p.m. UTC | #5
On Fri, 07 Aug 2020 19:25:22 +0900, Kunihiko Hayashi wrote:
> Even if phy driver doesn't probe, the error message can't be distinguished
> from other errors. This displays error message caused by the phy driver
> explicitly.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  drivers/pci/controller/dwc/pcie-uniphier.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
index 93ef608..7c8721e 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier.c
@@ -489,8 +489,12 @@  static int uniphier_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->rst);
 
 	priv->phy = devm_phy_optional_get(dev, "pcie-phy");
-	if (IS_ERR(priv->phy))
-		return PTR_ERR(priv->phy);
+	if (IS_ERR(priv->phy)) {
+		ret = PTR_ERR(priv->phy);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get phy (%d)\n", ret);
+		return ret;
+	}
 
 	platform_set_drvdata(pdev, priv);