@@ -30,6 +30,7 @@ config CLK_RENESAS
select CLK_R8A77980 if ARCH_R8A77980
select CLK_R8A77990 if ARCH_R8A77990
select CLK_R8A77995 if ARCH_R8A77995
+ select CLK_R8A779A0 if ARCH_R8A779A0
select CLK_R9A06G032 if ARCH_R9A06G032
select CLK_SH73A0 if ARCH_SH73A0
@@ -145,6 +146,10 @@ config CLK_R8A77995
bool "R-Car D3 clock support" if COMPILE_TEST
select CLK_RCAR_GEN3_CPG
+config CLK_R8A779A0
+ bool "R-Car V3U clock support" if COMPILE_TEST
+ select CLK_RENESAS_CPG_MSSR
+
config CLK_R9A06G032
bool "Renesas R9A06G032 clock driver"
help
@@ -27,6 +27,7 @@ obj-$(CONFIG_CLK_R8A77970) += r8a77970-cpg-mssr.o
obj-$(CONFIG_CLK_R8A77980) += r8a77980-cpg-mssr.o
obj-$(CONFIG_CLK_R8A77990) += r8a77990-cpg-mssr.o
obj-$(CONFIG_CLK_R8A77995) += r8a77995-cpg-mssr.o
+obj-$(CONFIG_CLK_R8A779A0) += r8a779a0-cpg-mssr.o
obj-$(CONFIG_CLK_R9A06G032) += r9a06g032-clocks.o
obj-$(CONFIG_CLK_SH73A0) += clk-sh73a0.o
new file mode 100644
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * r8a779a0 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ *
+ * Based on r8a7795-cpg-mssr.c
+ *
+ * Copyright (C) 2015 Glider bvba
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+#include <linux/bug.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen3-cpg.h"
+
+enum rcar_r8a779a0_clk_types {
+ CLK_TYPE_R8A779A0_MAIN = CLK_TYPE_CUSTOM,
+ CLK_TYPE_R8A779A0_PLL1,
+ CLK_TYPE_R8A779A0_PLL2X_3X, /* PLL[23][01] */
+ CLK_TYPE_R8A779A0_PLL5,
+ CLK_TYPE_R8A779A0_MDSEL, /* Select parent/divider using mode pin */
+ CLK_TYPE_R8A779A0_OSC, /* OSC EXTAL predivider and fixed divider */
+};
+
+struct rcar_r8a779a0_cpg_pll_config {
+ u8 extal_div;
+ u8 pll1_mult;
+ u8 pll1_div;
+ u8 pll5_mult;
+ u8 pll5_div;
+ u8 osc_prediv;
+};
+
+enum clk_ids {
+ /* Core Clock Outputs exported to DT */
+ LAST_DT_CORE_CLK = R8A779A0_CLK_OSC,
+
+ /* External Input Clocks */
+ CLK_EXTAL,
+ CLK_EXTALR,
+
+ /* Internal Core Clocks */
+ CLK_MAIN,
+ CLK_PLL1,
+ CLK_PLL20,
+ CLK_PLL21,
+ CLK_PLL30,
+ CLK_PLL31,
+ CLK_PLL5,
+ CLK_PLL1_DIV2,
+ CLK_PLL20_DIV2,
+ CLK_PLL21_DIV2,
+ CLK_PLL30_DIV2,
+ CLK_PLL31_DIV2,
+ CLK_PLL5_DIV2,
+ CLK_PLL5_DIV4,
+ CLK_S1,
+ CLK_S2,
+ CLK_S3,
+ CLK_SDSRC,
+ CLK_RPCSRC,
+ CLK_OCO,
+
+ /* Module Clocks */
+ MOD_CLK_BASE
+};
+
+#define DEF_PLL(_name, _id, _offset) \
+ DEF_BASE(_name, _id, CLK_TYPE_R8A779A0_PLL2X_3X, CLK_MAIN, \
+ .offset = _offset)
+
+#define CPG_PLL20CR 0x0834
+#define CPG_PLL21CR 0x0838
+#define CPG_PLL30CR 0x083c
+#define CPG_PLL31CR 0x0840
+
+static const struct cpg_core_clk r8a779a0_core_clks[] __initconst = {
+ /* External Clock Inputs */
+ DEF_INPUT("extal", CLK_EXTAL),
+ DEF_INPUT("extalr", CLK_EXTALR),
+
+ /* Internal Core Clocks */
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_R8A779A0_MAIN, CLK_EXTAL),
+ DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_R8A779A0_PLL1, CLK_MAIN),
+ DEF_BASE(".pll5", CLK_PLL5, CLK_TYPE_R8A779A0_PLL5, CLK_MAIN),
+ DEF_PLL(".pll20", CLK_PLL20, CPG_PLL20CR),
+ DEF_PLL(".pll21", CLK_PLL21, CPG_PLL21CR),
+ DEF_PLL(".pll30", CLK_PLL30, CPG_PLL30CR),
+ DEF_PLL(".pll31", CLK_PLL31, CPG_PLL31CR),
+
+ DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+ DEF_FIXED(".pll20_div2", CLK_PLL20_DIV2, CLK_PLL20, 2, 1),
+ DEF_FIXED(".pll21_div2", CLK_PLL21_DIV2, CLK_PLL21, 2, 1),
+ DEF_FIXED(".pll30_div2", CLK_PLL30_DIV2, CLK_PLL30, 2, 1),
+ DEF_FIXED(".pll31_div2", CLK_PLL31_DIV2, CLK_PLL31, 2, 1),
+ DEF_FIXED(".pll5_div2", CLK_PLL5_DIV2, CLK_PLL5, 2, 1),
+ DEF_FIXED(".pll5_div4", CLK_PLL5_DIV4, CLK_PLL5_DIV2, 2, 1),
+ DEF_FIXED(".s1", CLK_S1, CLK_PLL1_DIV2, 2, 1),
+ DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 4, 1),
+ DEF_RATE(".oco", CLK_OCO, 32768),
+
+ /* Core Clock Outputs */
+ DEF_FIXED("zx", R8A779A0_CLK_ZX, CLK_PLL20_DIV2, 2, 1),
+ DEF_FIXED("s1d1", R8A779A0_CLK_S1D1, CLK_S1, 1, 1),
+ DEF_FIXED("s1d2", R8A779A0_CLK_S1D2, CLK_S1, 2, 1),
+ DEF_FIXED("s1d4", R8A779A0_CLK_S1D4, CLK_S1, 4, 1),
+ DEF_FIXED("s1d8", R8A779A0_CLK_S1D8, CLK_S1, 8, 1),
+ DEF_FIXED("s1d12", R8A779A0_CLK_S1D12, CLK_S1, 12, 1),
+ DEF_FIXED("s3d1", R8A779A0_CLK_S3D1, CLK_S3, 1, 1),
+ DEF_FIXED("s3d2", R8A779A0_CLK_S3D2, CLK_S3, 2, 1),
+ DEF_FIXED("s3d4", R8A779A0_CLK_S3D4, CLK_S3, 4, 1),
+ DEF_FIXED("zs", R8A779A0_CLK_ZS, CLK_PLL1_DIV2, 4, 1),
+ DEF_FIXED("zt", R8A779A0_CLK_ZT, CLK_PLL1_DIV2, 2, 1),
+ DEF_FIXED("ztr", R8A779A0_CLK_ZTR, CLK_PLL1_DIV2, 2, 1),
+ DEF_FIXED("zr", R8A779A0_CLK_ZR, CLK_PLL1_DIV2, 1, 1),
+ DEF_FIXED("dsi", R8A779A0_CLK_DSI, CLK_PLL5_DIV4, 1, 1),
+ DEF_FIXED("cnndsp", R8A779A0_CLK_CNNDSP, CLK_PLL5_DIV4, 1, 1),
+ DEF_FIXED("vip", R8A779A0_CLK_VIP, CLK_PLL5, 5, 1),
+ DEF_FIXED("adgh", R8A779A0_CLK_ADGH, CLK_PLL5_DIV4, 1, 1),
+ DEF_FIXED("icu", R8A779A0_CLK_ICU, CLK_PLL5_DIV4, 2, 1),
+ DEF_FIXED("icud2", R8A779A0_CLK_ICUD2, CLK_PLL5_DIV4, 4, 1),
+ DEF_FIXED("vcbus", R8A779A0_CLK_VCBUS, CLK_PLL5_DIV4, 1, 1),
+ DEF_FIXED("cbfusa", R8A779A0_CLK_CBFUSA, CLK_MAIN, 2, 1),
+
+ DEF_DIV6P1("mso", R8A779A0_CLK_MSO, CLK_PLL5_DIV4, 0x87c),
+ DEF_DIV6P1("canfd", R8A779A0_CLK_CANFD, CLK_PLL5_DIV4, 0x878),
+ DEF_DIV6P1("csi0", R8A779A0_CLK_CSI0, CLK_PLL5_DIV4, 0x880),
+
+ DEF_GEN3_OSC("osc", R8A779A0_CLK_OSC, CLK_EXTAL, 8),
+ DEF_GEN3_MDSEL("r", R8A779A0_CLK_R, 29, CLK_EXTALR, 1, CLK_OCO, 1),
+};
+
+static const struct mssr_mod_clk r8a779a0_mod_clks[] __initconst = {
+ DEF_MOD("scif0", 702, R8A779A0_CLK_S1D8),
+ DEF_MOD("scif1", 703, R8A779A0_CLK_S1D8),
+ DEF_MOD("scif3", 704, R8A779A0_CLK_S1D8),
+ DEF_MOD("scif4", 705, R8A779A0_CLK_S1D8),
+};
+
+static spinlock_t cpg_lock;
+
+static const struct rcar_r8a779a0_cpg_pll_config *cpg_pll_config __initdata;
+static unsigned int cpg_clk_extalr __initdata;
+static u32 cpg_mode __initdata;
+
+struct clk * __init rcar_r8a779a0_cpg_clk_register(struct device *dev,
+ const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
+ struct clk **clks, void __iomem *base,
+ struct raw_notifier_head *notifiers)
+{
+ const struct clk *parent;
+ unsigned int mult = 1;
+ unsigned int div = 1;
+ u32 value;
+
+ parent = clks[core->parent & 0xffff]; /* some types use high bits */
+ if (IS_ERR(parent))
+ return ERR_CAST(parent);
+
+ switch (core->type) {
+ case CLK_TYPE_R8A779A0_MAIN:
+ div = cpg_pll_config->extal_div;
+ break;
+
+ case CLK_TYPE_R8A779A0_PLL1:
+ mult = cpg_pll_config->pll1_mult;
+ div = cpg_pll_config->pll1_div;
+ break;
+
+ case CLK_TYPE_R8A779A0_PLL2X_3X:
+ value = readl(base + core->offset);
+ mult = (((value >> 24) & 0x7f) + 1) * 2;
+ break;
+
+ case CLK_TYPE_R8A779A0_PLL5:
+ mult = cpg_pll_config->pll5_mult;
+ div = cpg_pll_config->pll5_div;
+ break;
+
+ case CLK_TYPE_R8A779A0_MDSEL:
+ /*
+ * Clock selectable between two parents and two fixed dividers
+ * using a mode pin
+ */
+ if (cpg_mode & BIT(core->offset)) {
+ div = core->div & 0xffff;
+ } else {
+ parent = clks[core->parent >> 16];
+ if (IS_ERR(parent))
+ return ERR_CAST(parent);
+ div = core->div >> 16;
+ }
+ mult = 1;
+ break;
+
+ case CLK_TYPE_R8A779A0_OSC:
+ /*
+ * Clock combining OSC EXTAL predivider and a fixed divider
+ */
+ div = cpg_pll_config->osc_prediv * core->div;
+ break;
+
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+
+ return clk_register_fixed_factor(NULL, core->name,
+ __clk_get_name(parent), 0, mult, div);
+}
+
+/*
+ * CPG Clock Data
+ */
+/*
+ * MD EXTAL PLL1 PLL20 PLL30 PLL4 PLL5 PLL6 OSC
+ * 14 13 (MHz) 21 31
+ * --------------------------------------------------------
+ * 0 0 16.66 x 1 x128 x216 x128 x144 x192 x128 /16
+ * 0 1 20 x 1 x106 x180 x106 x120 x160 x106 /19
+ * 1 0 Prohibited setting
+ * 1 1 33.33 / 2 x128 x216 x128 x144 x192 x128 /32
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 13) | \
+ (((md) & BIT(13)) >> 13))
+
+static const struct rcar_r8a779a0_cpg_pll_config cpg_pll_configs[4] = {
+ /* EXTAL div PLL1 mult/div PLL5 mult/div OSC prediv */
+ { 1, 128, 1, 192, 1, 16, },
+ { 1, 106, 1, 160, 1, 19, },
+ { 0, 0, 0, 0, 0, 0, },
+ { 2, 128, 1, 192, 1, 32, },
+};
+
+static int __init r8a779a0_cpg_mssr_init(struct device *dev)
+{
+ int error;
+
+ error = rcar_rst_read_mode_pins(&cpg_mode);
+ if (error)
+ return error;
+
+ cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+ cpg_clk_extalr = CLK_EXTALR;
+ spin_lock_init(&cpg_lock);
+
+ return 0;
+}
+
+const struct cpg_mssr_info r8a779a0_cpg_mssr_info __initconst = {
+ /* Core Clocks */
+ .core_clks = r8a779a0_core_clks,
+ .num_core_clks = ARRAY_SIZE(r8a779a0_core_clks),
+ .last_dt_core_clk = LAST_DT_CORE_CLK,
+ .num_total_core_clks = MOD_CLK_BASE,
+
+ /* Module Clocks */
+ .mod_clks = r8a779a0_mod_clks,
+ .num_mod_clks = ARRAY_SIZE(r8a779a0_mod_clks),
+ .num_hw_mod_clks = 15 * 32,
+
+ /* Callbacks */
+ .init = r8a779a0_cpg_mssr_init,
+ .cpg_clk_register = rcar_r8a779a0_cpg_clk_register,
+
+ .reg_layout = CLK_REG_LAYOUT_RCAR_V3U,
+};
@@ -57,6 +57,11 @@ static const u16 mstpsr[] = {
0x9A0, 0x9A4, 0x9A8, 0x9AC,
};
+static const u16 mstpsr_for_v3u[] = {
+ 0x2E00, 0x2E04, 0x2E08, 0x2E0C, 0x2E10, 0x2E14, 0x2E18, 0x2E1C,
+ 0x2E20, 0x2E24, 0x2E28, 0x2E2C, 0x2E30, 0x2E34, 0x2E38,
+};
+
/*
* System Module Stop Control Register offsets
*/
@@ -66,6 +71,11 @@ static const u16 smstpcr[] = {
0x990, 0x994, 0x998, 0x99C,
};
+static const u16 mstpcr_for_v3u[] = {
+ 0x2D00, 0x2D04, 0x2D08, 0x2D0C, 0x2D10, 0x2D14, 0x2D18, 0x2D1C,
+ 0x2D20, 0x2D24, 0x2D28, 0x2D2C, 0x2D30, 0x2D34, 0x2D38,
+};
+
/*
* Standby Control Register offsets (RZ/A)
* Base address is FRQCR register
@@ -135,7 +145,7 @@ struct cpg_mssr_priv {
struct {
u32 mask;
u32 val;
- } smstpcr_saved[ARRAY_SIZE(smstpcr)];
+ } smstpcr_saved[ARRAY_SIZE(mstpsr_for_v3u)];
struct clk *clks[];
};
@@ -799,6 +809,12 @@ static const struct of_device_id cpg_mssr_match[] = {
.data = &r8a77995_cpg_mssr_info,
},
#endif
+#ifdef CONFIG_CLK_R8A779A0
+ {
+ .compatible = "renesas,r8a779a0-cpg-mssr",
+ .data = &r8a779a0_cpg_mssr_info,
+ },
+#endif
{ /* sentinel */ }
};
@@ -939,6 +955,9 @@ static int __init cpg_mssr_common_init(struct device *dev,
priv->control_regs = smstpcr;
} else if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A) {
priv->control_regs = stbcr;
+ } else if (priv->reg_layout == CLK_REG_LAYOUT_RCAR_V3U) {
+ priv->status_regs = mstpsr_for_v3u;
+ priv->control_regs = mstpcr_for_v3u;
} else {
error = -EINVAL;
goto out_err;
@@ -88,6 +88,7 @@ struct device_node;
enum clk_reg_layout {
CLK_REG_LAYOUT_RCAR_GEN2_AND_GEN3 = 0,
CLK_REG_LAYOUT_RZ_A,
+ CLK_REG_LAYOUT_RCAR_V3U,
};
/**
@@ -179,6 +180,7 @@ extern const struct cpg_mssr_info r8a77970_cpg_mssr_info;
extern const struct cpg_mssr_info r8a77980_cpg_mssr_info;
extern const struct cpg_mssr_info r8a77990_cpg_mssr_info;
extern const struct cpg_mssr_info r8a77995_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a779a0_cpg_mssr_info;
void __init cpg_mssr_early_init(struct device_node *np,
const struct cpg_mssr_info *info);
Initial support for R-Car V3U (r8a779a0), including core, module clocks and register access, because register specification differs from R-Car Gen2/3. Inspired by patches in the BSP by LUU HOAI. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/clk/renesas/Kconfig | 5 + drivers/clk/renesas/Makefile | 1 + drivers/clk/renesas/r8a779a0-cpg-mssr.c | 281 ++++++++++++++++++++++++++++++++ drivers/clk/renesas/renesas-cpg-mssr.c | 21 ++- drivers/clk/renesas/renesas-cpg-mssr.h | 2 + 5 files changed, 309 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/renesas/r8a779a0-cpg-mssr.c