| Message ID | 20200911102259.3667381-4-cychiang@chromium.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add documentation and machine driver for SC7180 sound card | expand |
On 11/09/2020 11:22, Cheng-Yi Chiang wrote: > From: Ajit Pandey <ajitp@codeaurora.org> > > Add new driver to register sound card on sc7180 trogdor board and > do the required configuration for lpass cpu dai and external codecs > connected over MI2S interfaces. > > Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> > --- > sound/soc/qcom/Kconfig | 12 ++ > sound/soc/qcom/Makefile | 2 + > sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 281 insertions(+) > create mode 100644 sound/soc/qcom/sc7180.c > ... > > obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o > obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o > obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o > obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o > +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o > obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o > > #DSP lib > diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c > new file mode 100644 > index 000000000000..40bc4fc98842 > --- /dev/null > +++ b/sound/soc/qcom/sc7180.c > @@ -0,0 +1,267 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +// > +// Copyright (c) 2020, The Linux Foundation. All rights reserved. > +// > +// sc7180.c -- ALSA SoC Machine driver for SC7180 > + > +#include <dt-bindings/sound/sc7180-lpass.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <sound/core.h> > +#include <sound/jack.h> > +#include <sound/pcm.h> > +#include <sound/pcm_params.h> Do you need this header? > +#include <sound/soc.h> > +#include <uapi/linux/input-event-codes.h> > + > +#include "../codecs/rt5682.h" > +#include "common.h" > +#include "lpass.h" > + > +#define DEFAULT_SAMPLE_RATE_48K 48000 Looks like ^ is Not used! Overall the driver looks much cleaner now! Also to make progress on this patch, may be you add define for HDMI with a comment! Once unused remove, pl feel free to add ! Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --srini > +#define DEFAULT_MCLK_RATE 19200000 > +#define RT5682_PLL1_FREQ (48000 * 512) > + > +struct sc7180_snd_data { > + u32 pri_mi2s_clk_count; > + struct snd_soc_jack hs_jack; > + struct snd_soc_jack hdmi_jack; > +}; > + > +static void sc7180_jack_free(struct snd_jack *jack) > +{ > + struct snd_soc_component *component = jack->private_data; > + > + snd_soc_component_set_jack(component, NULL, NULL); > +} > + > +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd) > +{ > + struct snd_soc_card *card = rtd->card; > + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card); > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); > + struct snd_soc_component *component = codec_dai->component; > + struct snd_jack *jack; > + int rval; > + > + rval = snd_soc_card_jack_new( > + card, "Headset Jack", > + SND_JACK_HEADSET | > + SND_JACK_HEADPHONE | > + SND_JACK_BTN_0 | SND_JACK_BTN_1 | > + SND_JACK_BTN_2 | SND_JACK_BTN_3, > + &pdata->hs_jack, NULL, 0); > + > + if (rval < 0) { > + dev_err(card->dev, "Unable to add Headset Jack\n"); > + return rval; > + } > + > + jack = pdata->hs_jack.jack; > + > + snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); > + snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND); > + snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP); > + snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN); > + > + jack->private_data = component; > + jack->private_free = sc7180_jack_free; > + > + return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL); > +} > + > +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd) > +{ > + struct snd_soc_card *card = rtd->card; > + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card); > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); > + struct snd_soc_component *component = codec_dai->component; > + struct snd_jack *jack; > + int rval; > + > + rval = snd_soc_card_jack_new( > + card, "HDMI Jack", > + SND_JACK_LINEOUT, > + &pdata->hdmi_jack, NULL, 0); > + > + if (rval < 0) { > + dev_err(card->dev, "Unable to add HDMI Jack\n"); > + return rval; > + } > + > + jack = pdata->hdmi_jack.jack; > + jack->private_data = component; > + jack->private_free = sc7180_jack_free; > + > + return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL); > +} > + > +static int sc7180_init(struct snd_soc_pcm_runtime *rtd) > +{ > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); > + > + switch (cpu_dai->id) { > + case MI2S_PRIMARY: > + return sc7180_headset_init(rtd); > + case MI2S_SECONDARY: > + return 0; > + case HDMI: > + return sc7180_hdmi_init(rtd); > + default: > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, > + cpu_dai->id); > + return -EINVAL; > + } > + return 0; > +} > + > +static int sc7180_snd_startup(struct snd_pcm_substream *substream) > +{ > + struct snd_soc_pcm_runtime *rtd = substream->private_data; > + struct snd_soc_card *card = rtd->card; > + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card); > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); > + int ret; > + > + switch (cpu_dai->id) { > + case MI2S_PRIMARY: > + if (++data->pri_mi2s_clk_count == 1) { > + snd_soc_dai_set_sysclk(cpu_dai, > + LPASS_MCLK0, > + DEFAULT_MCLK_RATE, > + SNDRV_PCM_STREAM_PLAYBACK); > + } > + > + snd_soc_dai_set_fmt(codec_dai, > + SND_SOC_DAIFMT_CBS_CFS | > + SND_SOC_DAIFMT_NB_NF | > + SND_SOC_DAIFMT_I2S); > + > + /* Configure PLL1 for codec */ > + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK, > + DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ); > + if (ret) { > + dev_err(rtd->dev, "can't set codec pll: %d\n", ret); > + return ret; > + } > + > + /* Configure sysclk for codec */ > + ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1, > + RT5682_PLL1_FREQ, > + SND_SOC_CLOCK_IN); > + if (ret) > + dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", > + ret); > + > + break; > + case MI2S_SECONDARY: > + break; > + case HDMI: > + break; > + default: > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, > + cpu_dai->id); > + return -EINVAL; > + } > + return 0; > +} > + > +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream) > +{ > + struct snd_soc_pcm_runtime *rtd = substream->private_data; > + struct snd_soc_card *card = rtd->card; > + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card); > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); > + > + switch (cpu_dai->id) { > + case MI2S_PRIMARY: > + if (--data->pri_mi2s_clk_count == 0) { > + snd_soc_dai_set_sysclk(cpu_dai, > + LPASS_MCLK0, > + 0, > + SNDRV_PCM_STREAM_PLAYBACK); > + } > + break; > + case MI2S_SECONDARY: > + break; > + case HDMI: > + break; > + default: > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, > + cpu_dai->id); > + break; > + } > +} > + > +static const struct snd_soc_ops sc7180_ops = { > + .startup = sc7180_snd_startup, > + .shutdown = sc7180_snd_shutdown, > +}; > + > +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = { > + SND_SOC_DAPM_HP("Headphone Jack", NULL), > + SND_SOC_DAPM_MIC("Headset Mic", NULL), > +}; > + > +static struct snd_soc_card sc7180_card = { > + .owner = THIS_MODULE, > + .dapm_widgets = sc7180_snd_widgets, > + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets), > +}; > + > +static void sc7180_add_ops(struct snd_soc_card *card) > +{ > + struct snd_soc_dai_link *link; > + int i; > + > + for_each_card_prelinks(card, i, link) { > + link->ops = &sc7180_ops; > + link->init = sc7180_init; > + } > +} > + > +static int sc7180_snd_platform_probe(struct platform_device *pdev) > +{ > + struct snd_soc_card *card = &sc7180_card; > + struct sc7180_snd_data *data; > + struct device *dev = &pdev->dev; > + int ret; > + > + /* Allocate the private data */ > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + > + card->dev = dev; > + snd_soc_card_set_drvdata(card, data); > + > + ret = qcom_snd_parse_of(card); > + if (ret) { > + dev_err(dev, "Error parsing OF data\n"); > + return ret; > + } > + > + sc7180_add_ops(card); > + > + return devm_snd_soc_register_card(dev, card); > +} > + > +static const struct of_device_id sc7180_snd_device_id[] = { > + { .compatible = "qcom,sc7180-sndcard" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id); > + > +static struct platform_driver sc7180_snd_driver = { > + .probe = sc7180_snd_platform_probe, > + .driver = { > + .name = "msm-snd-sc7180", > + .of_match_table = sc7180_snd_device_id, > + }, > +}; > +module_platform_driver(sc7180_snd_driver); > + > +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver"); > +MODULE_LICENSE("GPL v2"); >
Hi, Thanks for removing the weird use of auxilliary devices :) On Fri, Sep 11, 2020 at 06:22:59PM +0800, Cheng-Yi Chiang wrote: > From: Ajit Pandey <ajitp@codeaurora.org> > > Add new driver to register sound card on sc7180 trogdor board and > do the required configuration for lpass cpu dai and external codecs > connected over MI2S interfaces. > > Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> > --- > sound/soc/qcom/Kconfig | 12 ++ > sound/soc/qcom/Makefile | 2 + > sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 281 insertions(+) > create mode 100644 sound/soc/qcom/sc7180.c > > diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig > index a607ace8b089..0459185ee243 100644 > --- a/sound/soc/qcom/Kconfig > +++ b/sound/soc/qcom/Kconfig > @@ -116,4 +116,16 @@ config SND_SOC_SDM845 > SDM845 SoC-based systems. > Say Y if you want to use audio device on this SoCs. > > +config SND_SOC_SC7180 > + tristate "SoC Machine driver for SC7180 boards" > + depends on I2C > + select SND_SOC_QCOM_COMMON > + select SND_SOC_LPASS_SC7180 > + select SND_SOC_MAX98357A > + select SND_SOC_RT5682_I2C > + help > + To add support for audio on Qualcomm Technologies Inc. > + SC7180 SoC-based systems. > + Say Y if you want to use audio device on this SoCs. > + > endif #SND_SOC_QCOM > diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile > index 7972c9479ab0..0cdcbf367ef1 100644 > --- a/sound/soc/qcom/Makefile > +++ b/sound/soc/qcom/Makefile > @@ -17,12 +17,14 @@ snd-soc-storm-objs := storm.o > snd-soc-apq8016-sbc-objs := apq8016_sbc.o > snd-soc-apq8096-objs := apq8096.o > snd-soc-sdm845-objs := sdm845.o > +snd-soc-sc7180-objs := sc7180.o > snd-soc-qcom-common-objs := common.o > > obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o > obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o > obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o > obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o > +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o > obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o > > #DSP lib > diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c > new file mode 100644 > index 000000000000..40bc4fc98842 > --- /dev/null > +++ b/sound/soc/qcom/sc7180.c > @@ -0,0 +1,267 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +// > +// Copyright (c) 2020, The Linux Foundation. All rights reserved. > +// > +// sc7180.c -- ALSA SoC Machine driver for SC7180 > + > +#include <dt-bindings/sound/sc7180-lpass.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <sound/core.h> > +#include <sound/jack.h> > +#include <sound/pcm.h> > +#include <sound/pcm_params.h> > +#include <sound/soc.h> > +#include <uapi/linux/input-event-codes.h> > + > +#include "../codecs/rt5682.h" > +#include "common.h" > +#include "lpass.h" > + > +#define DEFAULT_SAMPLE_RATE_48K 48000 > +#define DEFAULT_MCLK_RATE 19200000 > +#define RT5682_PLL1_FREQ (48000 * 512) > + > +struct sc7180_snd_data { > + u32 pri_mi2s_clk_count; > + struct snd_soc_jack hs_jack; > + struct snd_soc_jack hdmi_jack; > +}; [...] > + > +static const struct snd_soc_ops sc7180_ops = { > + .startup = sc7180_snd_startup, > + .shutdown = sc7180_snd_shutdown, > +}; > + > +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = { > + SND_SOC_DAPM_HP("Headphone Jack", NULL), > + SND_SOC_DAPM_MIC("Headset Mic", NULL), > +}; > + > +static struct snd_soc_card sc7180_card = { > + .owner = THIS_MODULE, > + .dapm_widgets = sc7180_snd_widgets, > + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets), > +}; Given that you modify this struct and already allocate some memory dynamically (sc7810_snd_data), it might be a bit cleaner to avoid modifying global memory and instead allocate snd_soc_card dynamically as well. Could just add it to sc7180_snd_data for example (see e.g. apq8016_sbc) > + > +static void sc7180_add_ops(struct snd_soc_card *card) > +{ > + struct snd_soc_dai_link *link; > + int i; > + > + for_each_card_prelinks(card, i, link) { > + link->ops = &sc7180_ops; > + link->init = sc7180_init; > + } > +} > + > +static int sc7180_snd_platform_probe(struct platform_device *pdev) > +{ > + struct snd_soc_card *card = &sc7180_card; > + struct sc7180_snd_data *data; > + struct device *dev = &pdev->dev; > + int ret; > + > + /* Allocate the private data */ > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + > + card->dev = dev; > + snd_soc_card_set_drvdata(card, data); > + > + ret = qcom_snd_parse_of(card); > + if (ret) { > + dev_err(dev, "Error parsing OF data\n"); This will just add noise in case of probe deferral. qcom_snd_parse_of() already logs a message for most errors so you can just remove this one. > + return ret; > + } > + > + sc7180_add_ops(card); > + > + return devm_snd_soc_register_card(dev, card); > +} > + > +static const struct of_device_id sc7180_snd_device_id[] = { > + { .compatible = "qcom,sc7180-sndcard" }, Will all SC7180 use the configuration in this driver? (With RT5682, HDMI, the jack configuration etc). Otherwise a more specific compatible string might be better, so other device-specific ones can be added later. Thanks! Stephan
On Fri, Sep 11, 2020 at 7:05 PM Srinivas Kandagatla <srinivas.kandagatla@linaro.org> wrote: > > > > On 11/09/2020 11:22, Cheng-Yi Chiang wrote: > > From: Ajit Pandey <ajitp@codeaurora.org> > > > > Add new driver to register sound card on sc7180 trogdor board and > > do the required configuration for lpass cpu dai and external codecs > > connected over MI2S interfaces. > > > > Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> > > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> > > --- > > sound/soc/qcom/Kconfig | 12 ++ > > sound/soc/qcom/Makefile | 2 + > > sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 281 insertions(+) > > create mode 100644 sound/soc/qcom/sc7180.c > > > ... > > > > obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o > > obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o > > obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o > > obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o > > +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o > > obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o > > > > #DSP lib > > diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c > > new file mode 100644 > > index 000000000000..40bc4fc98842 > > --- /dev/null > > +++ b/sound/soc/qcom/sc7180.c > > @@ -0,0 +1,267 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +// > > +// Copyright (c) 2020, The Linux Foundation. All rights reserved. > > +// > > +// sc7180.c -- ALSA SoC Machine driver for SC7180 > > + > > +#include <dt-bindings/sound/sc7180-lpass.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_device.h> > > +#include <sound/core.h> > > +#include <sound/jack.h> > > +#include <sound/pcm.h> > > +#include <sound/pcm_params.h> > Do you need this header? > Hi Srinivas, thanks for taking a closer look! I will remove it in v10. > > > +#include <sound/soc.h> > > +#include <uapi/linux/input-event-codes.h> > > + > > +#include "../codecs/rt5682.h" > > +#include "common.h" > > +#include "lpass.h" > > + > > +#define DEFAULT_SAMPLE_RATE_48K 48000 > > Looks like ^ is Not used! > I will remove it in v10. > > Overall the driver looks much cleaner now! > > Also to make progress on this patch, may be you add define for HDMI with > a comment! After discussion with Srinivasa Rao, we plan to use a new name that is more specific to lpass-sc7180 DP dai: // This will be defined in include/dt-bindings/sound/sc7180-lpass.h #define SC7180_LPASS_DP 2 Do you think it is okay ? Thanks! > > Once unused remove, pl feel free to add ! > > Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > > > --srini > > > > +#define DEFAULT_MCLK_RATE 19200000 > > +#define RT5682_PLL1_FREQ (48000 * 512) > > + > > +struct sc7180_snd_data { > > + u32 pri_mi2s_clk_count; > > + struct snd_soc_jack hs_jack; > > + struct snd_soc_jack hdmi_jack; > > +}; > > + > > +static void sc7180_jack_free(struct snd_jack *jack) > > +{ > > + struct snd_soc_component *component = jack->private_data; > > + > > + snd_soc_component_set_jack(component, NULL, NULL); > > +} > > + > > +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd) > > +{ > > + struct snd_soc_card *card = rtd->card; > > + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card); > > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); > > + struct snd_soc_component *component = codec_dai->component; > > + struct snd_jack *jack; > > + int rval; > > + > > + rval = snd_soc_card_jack_new( > > + card, "Headset Jack", > > + SND_JACK_HEADSET | > > + SND_JACK_HEADPHONE | > > + SND_JACK_BTN_0 | SND_JACK_BTN_1 | > > + SND_JACK_BTN_2 | SND_JACK_BTN_3, > > + &pdata->hs_jack, NULL, 0); > > + > > + if (rval < 0) { > > + dev_err(card->dev, "Unable to add Headset Jack\n"); > > + return rval; > > + } > > + > > + jack = pdata->hs_jack.jack; > > + > > + snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); > > + snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND); > > + snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP); > > + snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN); > > + > > + jack->private_data = component; > > + jack->private_free = sc7180_jack_free; > > + > > + return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL); > > +} > > + > > +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd) > > +{ > > + struct snd_soc_card *card = rtd->card; > > + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card); > > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); > > + struct snd_soc_component *component = codec_dai->component; > > + struct snd_jack *jack; > > + int rval; > > + > > + rval = snd_soc_card_jack_new( > > + card, "HDMI Jack", > > + SND_JACK_LINEOUT, > > + &pdata->hdmi_jack, NULL, 0); > > + > > + if (rval < 0) { > > + dev_err(card->dev, "Unable to add HDMI Jack\n"); > > + return rval; > > + } > > + > > + jack = pdata->hdmi_jack.jack; > > + jack->private_data = component; > > + jack->private_free = sc7180_jack_free; > > + > > + return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL); > > +} > > + > > +static int sc7180_init(struct snd_soc_pcm_runtime *rtd) > > +{ > > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); > > + > > + switch (cpu_dai->id) { > > + case MI2S_PRIMARY: > > + return sc7180_headset_init(rtd); > > + case MI2S_SECONDARY: > > + return 0; > > + case HDMI: > > + return sc7180_hdmi_init(rtd); > > + default: > > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, > > + cpu_dai->id); > > + return -EINVAL; > > + } > > + return 0; > > +} > > + > > +static int sc7180_snd_startup(struct snd_pcm_substream *substream) > > +{ > > + struct snd_soc_pcm_runtime *rtd = substream->private_data; > > + struct snd_soc_card *card = rtd->card; > > + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card); > > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); > > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); > > + int ret; > > + > > + switch (cpu_dai->id) { > > + case MI2S_PRIMARY: > > + if (++data->pri_mi2s_clk_count == 1) { > > + snd_soc_dai_set_sysclk(cpu_dai, > > + LPASS_MCLK0, > > + DEFAULT_MCLK_RATE, > > + SNDRV_PCM_STREAM_PLAYBACK); > > + } > > + > > + snd_soc_dai_set_fmt(codec_dai, > > + SND_SOC_DAIFMT_CBS_CFS | > > + SND_SOC_DAIFMT_NB_NF | > > + SND_SOC_DAIFMT_I2S); > > + > > + /* Configure PLL1 for codec */ > > + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK, > > + DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ); > > + if (ret) { > > + dev_err(rtd->dev, "can't set codec pll: %d\n", ret); > > + return ret; > > + } > > + > > + /* Configure sysclk for codec */ > > + ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1, > > + RT5682_PLL1_FREQ, > > + SND_SOC_CLOCK_IN); > > + if (ret) > > + dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", > > + ret); > > + > > + break; > > + case MI2S_SECONDARY: > > + break; > > + case HDMI: > > + break; > > + default: > > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, > > + cpu_dai->id); > > + return -EINVAL; > > + } > > + return 0; > > +} > > + > > +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream) > > +{ > > + struct snd_soc_pcm_runtime *rtd = substream->private_data; > > + struct snd_soc_card *card = rtd->card; > > + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card); > > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); > > + > > + switch (cpu_dai->id) { > > + case MI2S_PRIMARY: > > + if (--data->pri_mi2s_clk_count == 0) { > > + snd_soc_dai_set_sysclk(cpu_dai, > > + LPASS_MCLK0, > > + 0, > > + SNDRV_PCM_STREAM_PLAYBACK); > > + } > > + break; > > + case MI2S_SECONDARY: > > + break; > > + case HDMI: > > + break; > > + default: > > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, > > + cpu_dai->id); > > + break; > > + } > > +} > > + > > +static const struct snd_soc_ops sc7180_ops = { > > + .startup = sc7180_snd_startup, > > + .shutdown = sc7180_snd_shutdown, > > +}; > > + > > +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = { > > + SND_SOC_DAPM_HP("Headphone Jack", NULL), > > + SND_SOC_DAPM_MIC("Headset Mic", NULL), > > +}; > > + > > +static struct snd_soc_card sc7180_card = { > > + .owner = THIS_MODULE, > > + .dapm_widgets = sc7180_snd_widgets, > > + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets), > > +}; > > + > > +static void sc7180_add_ops(struct snd_soc_card *card) > > +{ > > + struct snd_soc_dai_link *link; > > + int i; > > + > > + for_each_card_prelinks(card, i, link) { > > + link->ops = &sc7180_ops; > > + link->init = sc7180_init; > > + } > > +} > > + > > +static int sc7180_snd_platform_probe(struct platform_device *pdev) > > +{ > > + struct snd_soc_card *card = &sc7180_card; > > + struct sc7180_snd_data *data; > > + struct device *dev = &pdev->dev; > > + int ret; > > + > > + /* Allocate the private data */ > > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > > + if (!data) > > + return -ENOMEM; > > + > > + card->dev = dev; > > + snd_soc_card_set_drvdata(card, data); > > + > > + ret = qcom_snd_parse_of(card); > > + if (ret) { > > + dev_err(dev, "Error parsing OF data\n"); > > + return ret; > > + } > > + > > + sc7180_add_ops(card); > > + > > + return devm_snd_soc_register_card(dev, card); > > +} > > + > > +static const struct of_device_id sc7180_snd_device_id[] = { > > + { .compatible = "qcom,sc7180-sndcard" }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id); > > + > > +static struct platform_driver sc7180_snd_driver = { > > + .probe = sc7180_snd_platform_probe, > > + .driver = { > > + .name = "msm-snd-sc7180", > > + .of_match_table = sc7180_snd_device_id, > > + }, > > +}; > > +module_platform_driver(sc7180_snd_driver); > > + > > +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver"); > > +MODULE_LICENSE("GPL v2"); > >
On Fri, Sep 11, 2020 at 11:01 PM Stephan Gerhold <stephan@gerhold.net> wrote: > > Hi, > > Thanks for removing the weird use of auxilliary devices :) > Hi Stephan, Thanks for the suggestion! > On Fri, Sep 11, 2020 at 06:22:59PM +0800, Cheng-Yi Chiang wrote: > > From: Ajit Pandey <ajitp@codeaurora.org> > > > > Add new driver to register sound card on sc7180 trogdor board and > > do the required configuration for lpass cpu dai and external codecs > > connected over MI2S interfaces. > > > > Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> > > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> > > --- > > sound/soc/qcom/Kconfig | 12 ++ > > sound/soc/qcom/Makefile | 2 + > > sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 281 insertions(+) > > create mode 100644 sound/soc/qcom/sc7180.c > > > > diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig > > index a607ace8b089..0459185ee243 100644 > > --- a/sound/soc/qcom/Kconfig > > +++ b/sound/soc/qcom/Kconfig > > @@ -116,4 +116,16 @@ config SND_SOC_SDM845 > > SDM845 SoC-based systems. > > Say Y if you want to use audio device on this SoCs. > > > > +config SND_SOC_SC7180 > > + tristate "SoC Machine driver for SC7180 boards" > > + depends on I2C > > + select SND_SOC_QCOM_COMMON > > + select SND_SOC_LPASS_SC7180 > > + select SND_SOC_MAX98357A > > + select SND_SOC_RT5682_I2C > > + help > > + To add support for audio on Qualcomm Technologies Inc. > > + SC7180 SoC-based systems. > > + Say Y if you want to use audio device on this SoCs. > > + > > endif #SND_SOC_QCOM > > diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile > > index 7972c9479ab0..0cdcbf367ef1 100644 > > --- a/sound/soc/qcom/Makefile > > +++ b/sound/soc/qcom/Makefile > > @@ -17,12 +17,14 @@ snd-soc-storm-objs := storm.o > > snd-soc-apq8016-sbc-objs := apq8016_sbc.o > > snd-soc-apq8096-objs := apq8096.o > > snd-soc-sdm845-objs := sdm845.o > > +snd-soc-sc7180-objs := sc7180.o > > snd-soc-qcom-common-objs := common.o > > > > obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o > > obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o > > obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o > > obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o > > +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o > > obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o > > > > #DSP lib > > diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c > > new file mode 100644 > > index 000000000000..40bc4fc98842 > > --- /dev/null > > +++ b/sound/soc/qcom/sc7180.c > > @@ -0,0 +1,267 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +// > > +// Copyright (c) 2020, The Linux Foundation. All rights reserved. > > +// > > +// sc7180.c -- ALSA SoC Machine driver for SC7180 > > + > > +#include <dt-bindings/sound/sc7180-lpass.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_device.h> > > +#include <sound/core.h> > > +#include <sound/jack.h> > > +#include <sound/pcm.h> > > +#include <sound/pcm_params.h> > > +#include <sound/soc.h> > > +#include <uapi/linux/input-event-codes.h> > > + > > +#include "../codecs/rt5682.h" > > +#include "common.h" > > +#include "lpass.h" > > + > > +#define DEFAULT_SAMPLE_RATE_48K 48000 > > +#define DEFAULT_MCLK_RATE 19200000 > > +#define RT5682_PLL1_FREQ (48000 * 512) > > + > > +struct sc7180_snd_data { > > + u32 pri_mi2s_clk_count; > > + struct snd_soc_jack hs_jack; > > + struct snd_soc_jack hdmi_jack; > > +}; > > [...] > > > + > > +static const struct snd_soc_ops sc7180_ops = { > > + .startup = sc7180_snd_startup, > > + .shutdown = sc7180_snd_shutdown, > > +}; > > + > > +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = { > > + SND_SOC_DAPM_HP("Headphone Jack", NULL), > > + SND_SOC_DAPM_MIC("Headset Mic", NULL), > > +}; > > + > > +static struct snd_soc_card sc7180_card = { > > + .owner = THIS_MODULE, > > + .dapm_widgets = sc7180_snd_widgets, > > + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets), > > +}; > > Given that you modify this struct and already allocate some memory > dynamically (sc7810_snd_data), it might be a bit cleaner to avoid > modifying global memory and instead allocate snd_soc_card dynamically as > well. Could just add it to sc7180_snd_data for example (see e.g. apq8016_sbc) > Good idea. I will modify it in v10. > > + > > +static void sc7180_add_ops(struct snd_soc_card *card) > > +{ > > + struct snd_soc_dai_link *link; > > + int i; > > + > > + for_each_card_prelinks(card, i, link) { > > + link->ops = &sc7180_ops; > > + link->init = sc7180_init; > > + } > > +} > > + > > +static int sc7180_snd_platform_probe(struct platform_device *pdev) > > +{ > > + struct snd_soc_card *card = &sc7180_card; > > + struct sc7180_snd_data *data; > > + struct device *dev = &pdev->dev; > > + int ret; > > + > > + /* Allocate the private data */ > > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > > + if (!data) > > + return -ENOMEM; > > + > > + card->dev = dev; > > + snd_soc_card_set_drvdata(card, data); > > + > > + ret = qcom_snd_parse_of(card); > > + if (ret) { > > + dev_err(dev, "Error parsing OF data\n"); > > This will just add noise in case of probe deferral. qcom_snd_parse_of() > already logs a message for most errors so you can just remove this one. > I will remove it in v10. > > + return ret; > > + } > > + > > + sc7180_add_ops(card); > > + > > + return devm_snd_soc_register_card(dev, card); > > +} > > + > > +static const struct of_device_id sc7180_snd_device_id[] = { > > + { .compatible = "qcom,sc7180-sndcard" }, > > Will all SC7180 use the configuration in this driver? (With RT5682, > HDMI, the jack configuration etc). Otherwise a more specific compatible > string might be better, so other device-specific ones can be added later. > I thought we can do that in the next patch when we want to introduce different board variations. But maybe doing it earlier is better. There will be three variations on trogdor: rt5682 (1mic), max98357, dp rt5682 (2mic), max98357, dp adau7002, max98357, dp I would like to name them qcom,sc7180-sndcard-rt5682-m98357-1mic qcom,sc7180-sndcard-rt5682-m98357-2mic qcom,sc7180-sndcard-ad7002-m98357 What do you think ? Thanks for the review and suggestions! > Thanks! > Stephan
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index a607ace8b089..0459185ee243 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -116,4 +116,16 @@ config SND_SOC_SDM845 SDM845 SoC-based systems. Say Y if you want to use audio device on this SoCs. +config SND_SOC_SC7180 + tristate "SoC Machine driver for SC7180 boards" + depends on I2C + select SND_SOC_QCOM_COMMON + select SND_SOC_LPASS_SC7180 + select SND_SOC_MAX98357A + select SND_SOC_RT5682_I2C + help + To add support for audio on Qualcomm Technologies Inc. + SC7180 SoC-based systems. + Say Y if you want to use audio device on this SoCs. + endif #SND_SOC_QCOM diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile index 7972c9479ab0..0cdcbf367ef1 100644 --- a/sound/soc/qcom/Makefile +++ b/sound/soc/qcom/Makefile @@ -17,12 +17,14 @@ snd-soc-storm-objs := storm.o snd-soc-apq8016-sbc-objs := apq8016_sbc.o snd-soc-apq8096-objs := apq8096.o snd-soc-sdm845-objs := sdm845.o +snd-soc-sc7180-objs := sc7180.o snd-soc-qcom-common-objs := common.o obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o #DSP lib diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c new file mode 100644 index 000000000000..40bc4fc98842 --- /dev/null +++ b/sound/soc/qcom/sc7180.c @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright (c) 2020, The Linux Foundation. All rights reserved. +// +// sc7180.c -- ALSA SoC Machine driver for SC7180 + +#include <dt-bindings/sound/sc7180-lpass.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <uapi/linux/input-event-codes.h> + +#include "../codecs/rt5682.h" +#include "common.h" +#include "lpass.h" + +#define DEFAULT_SAMPLE_RATE_48K 48000 +#define DEFAULT_MCLK_RATE 19200000 +#define RT5682_PLL1_FREQ (48000 * 512) + +struct sc7180_snd_data { + u32 pri_mi2s_clk_count; + struct snd_soc_jack hs_jack; + struct snd_soc_jack hdmi_jack; +}; + +static void sc7180_jack_free(struct snd_jack *jack) +{ + struct snd_soc_component *component = jack->private_data; + + snd_soc_component_set_jack(component, NULL, NULL); +} + +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_card *card = rtd->card; + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + struct snd_soc_component *component = codec_dai->component; + struct snd_jack *jack; + int rval; + + rval = snd_soc_card_jack_new( + card, "Headset Jack", + SND_JACK_HEADSET | + SND_JACK_HEADPHONE | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3, + &pdata->hs_jack, NULL, 0); + + if (rval < 0) { + dev_err(card->dev, "Unable to add Headset Jack\n"); + return rval; + } + + jack = pdata->hs_jack.jack; + + snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); + snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND); + snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP); + snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN); + + jack->private_data = component; + jack->private_free = sc7180_jack_free; + + return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL); +} + +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_card *card = rtd->card; + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + struct snd_soc_component *component = codec_dai->component; + struct snd_jack *jack; + int rval; + + rval = snd_soc_card_jack_new( + card, "HDMI Jack", + SND_JACK_LINEOUT, + &pdata->hdmi_jack, NULL, 0); + + if (rval < 0) { + dev_err(card->dev, "Unable to add HDMI Jack\n"); + return rval; + } + + jack = pdata->hdmi_jack.jack; + jack->private_data = component; + jack->private_free = sc7180_jack_free; + + return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL); +} + +static int sc7180_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + + switch (cpu_dai->id) { + case MI2S_PRIMARY: + return sc7180_headset_init(rtd); + case MI2S_SECONDARY: + return 0; + case HDMI: + return sc7180_hdmi_init(rtd); + default: + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, + cpu_dai->id); + return -EINVAL; + } + return 0; +} + +static int sc7180_snd_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_card *card = rtd->card; + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card); + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + int ret; + + switch (cpu_dai->id) { + case MI2S_PRIMARY: + if (++data->pri_mi2s_clk_count == 1) { + snd_soc_dai_set_sysclk(cpu_dai, + LPASS_MCLK0, + DEFAULT_MCLK_RATE, + SNDRV_PCM_STREAM_PLAYBACK); + } + + snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_CBS_CFS | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_I2S); + + /* Configure PLL1 for codec */ + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK, + DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ); + if (ret) { + dev_err(rtd->dev, "can't set codec pll: %d\n", ret); + return ret; + } + + /* Configure sysclk for codec */ + ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1, + RT5682_PLL1_FREQ, + SND_SOC_CLOCK_IN); + if (ret) + dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", + ret); + + break; + case MI2S_SECONDARY: + break; + case HDMI: + break; + default: + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, + cpu_dai->id); + return -EINVAL; + } + return 0; +} + +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_card *card = rtd->card; + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card); + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + + switch (cpu_dai->id) { + case MI2S_PRIMARY: + if (--data->pri_mi2s_clk_count == 0) { + snd_soc_dai_set_sysclk(cpu_dai, + LPASS_MCLK0, + 0, + SNDRV_PCM_STREAM_PLAYBACK); + } + break; + case MI2S_SECONDARY: + break; + case HDMI: + break; + default: + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, + cpu_dai->id); + break; + } +} + +static const struct snd_soc_ops sc7180_ops = { + .startup = sc7180_snd_startup, + .shutdown = sc7180_snd_shutdown, +}; + +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), +}; + +static struct snd_soc_card sc7180_card = { + .owner = THIS_MODULE, + .dapm_widgets = sc7180_snd_widgets, + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets), +}; + +static void sc7180_add_ops(struct snd_soc_card *card) +{ + struct snd_soc_dai_link *link; + int i; + + for_each_card_prelinks(card, i, link) { + link->ops = &sc7180_ops; + link->init = sc7180_init; + } +} + +static int sc7180_snd_platform_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card = &sc7180_card; + struct sc7180_snd_data *data; + struct device *dev = &pdev->dev; + int ret; + + /* Allocate the private data */ + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + card->dev = dev; + snd_soc_card_set_drvdata(card, data); + + ret = qcom_snd_parse_of(card); + if (ret) { + dev_err(dev, "Error parsing OF data\n"); + return ret; + } + + sc7180_add_ops(card); + + return devm_snd_soc_register_card(dev, card); +} + +static const struct of_device_id sc7180_snd_device_id[] = { + { .compatible = "qcom,sc7180-sndcard" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id); + +static struct platform_driver sc7180_snd_driver = { + .probe = sc7180_snd_platform_probe, + .driver = { + .name = "msm-snd-sc7180", + .of_match_table = sc7180_snd_device_id, + }, +}; +module_platform_driver(sc7180_snd_driver); + +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver"); +MODULE_LICENSE("GPL v2");