| Message ID | 20200912110820.597135-1-keescook@chromium.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | selftests/seccomp: Refactor change_syscall() | expand |
Kees Cook <keescook@chromium.org> writes: > Hi, > > This refactors the seccomp selftest macros used in change_syscall(), > in an effort to remove special cases for mips, arm, arm64, and xtensa, > which paves the way for powerpc fixes. > > I'm not entirely done testing, but all-arch build tests and x86_64 > selftests pass. I'll be doing arm, arm64, and i386 selftests shortly, > but I currently don't have an easy way to check xtensa, mips, nor > powerpc. Any help there would be appreciated! The series builds fine for me, and all the tests pass (see below). Thanks for picking up those changes to deal with powerpc being oddball. Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) cheers ./seccomp_bpf TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... # OK global.user_notification_sibling_pid_ns ok 42 global.user_notification_sibling_pid_ns # RUN global.user_notification_fault_recv ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... # OK global.user_notification_sibling_pid_ns ok 42 global.user_notification_sibling_pid_ns # RUN global.user_notification_fault_recv ... # OK global.user_notification_fault_recv ok 43 global.user_notification_fault_recv # RUN global.seccomp_get_notif_sizes ... # OK global.seccomp_get_notif_sizes ok 44 global.seccomp_get_notif_sizes # RUN global.user_notification_continue ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... # OK global.user_notification_sibling_pid_ns ok 42 global.user_notification_sibling_pid_ns # RUN global.user_notification_fault_recv ... # OK global.user_notification_fault_recv ok 43 global.user_notification_fault_recv # RUN global.seccomp_get_notif_sizes ... # OK global.seccomp_get_notif_sizes ok 44 global.seccomp_get_notif_sizes # RUN global.user_notification_continue ... # OK global.user_notification_continue ok 45 global.user_notification_continue # RUN global.user_notification_filter_empty ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... # OK global.user_notification_sibling_pid_ns ok 42 global.user_notification_sibling_pid_ns # RUN global.user_notification_fault_recv ... # OK global.user_notification_fault_recv ok 43 global.user_notification_fault_recv # RUN global.seccomp_get_notif_sizes ... # OK global.seccomp_get_notif_sizes ok 44 global.seccomp_get_notif_sizes # RUN global.user_notification_continue ... # OK global.user_notification_continue ok 45 global.user_notification_continue # RUN global.user_notification_filter_empty ... # OK global.user_notification_filter_empty ok 46 global.user_notification_filter_empty # RUN global.user_notification_filter_empty_threaded ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... # OK global.user_notification_sibling_pid_ns ok 42 global.user_notification_sibling_pid_ns # RUN global.user_notification_fault_recv ... # OK global.user_notification_fault_recv ok 43 global.user_notification_fault_recv # RUN global.seccomp_get_notif_sizes ... # OK global.seccomp_get_notif_sizes ok 44 global.seccomp_get_notif_sizes # RUN global.user_notification_continue ... # OK global.user_notification_continue ok 45 global.user_notification_continue # RUN global.user_notification_filter_empty ... # OK global.user_notification_filter_empty ok 46 global.user_notification_filter_empty # RUN global.user_notification_filter_empty_threaded ... # OK global.user_notification_filter_empty_threaded ok 47 global.user_notification_filter_empty_threaded # RUN global.user_notification_addfd ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... # OK global.user_notification_sibling_pid_ns ok 42 global.user_notification_sibling_pid_ns # RUN global.user_notification_fault_recv ... # OK global.user_notification_fault_recv ok 43 global.user_notification_fault_recv # RUN global.seccomp_get_notif_sizes ... # OK global.seccomp_get_notif_sizes ok 44 global.seccomp_get_notif_sizes # RUN global.user_notification_continue ... # OK global.user_notification_continue ok 45 global.user_notification_continue # RUN global.user_notification_filter_empty ... # OK global.user_notification_filter_empty ok 46 global.user_notification_filter_empty # RUN global.user_notification_filter_empty_threaded ... # OK global.user_notification_filter_empty_threaded ok 47 global.user_notification_filter_empty_threaded # RUN global.user_notification_addfd ... # OK global.user_notification_addfd ok 48 global.user_notification_addfd # RUN global.user_notification_addfd_rlimit ... TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN global.kcmp ... # OK global.kcmp ok 1 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 2 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 3 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 4 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 5 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 6 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 7 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 8 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 9 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 10 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 11 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 12 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 13 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 14 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 15 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 16 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 17 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 18 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 19 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 20 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 21 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 22 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 23 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 24 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 25 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 26 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 27 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 28 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 29 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 30 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 31 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 32 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 33 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 34 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 35 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 36 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 37 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 38 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 39 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 40 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 41 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... # OK global.user_notification_sibling_pid_ns ok 42 global.user_notification_sibling_pid_ns # RUN global.user_notification_fault_recv ... # OK global.user_notification_fault_recv ok 43 global.user_notification_fault_recv # RUN global.seccomp_get_notif_sizes ... # OK global.seccomp_get_notif_sizes ok 44 global.seccomp_get_notif_sizes # RUN global.user_notification_continue ... # OK global.user_notification_continue ok 45 global.user_notification_continue # RUN global.user_notification_filter_empty ... # OK global.user_notification_filter_empty ok 46 global.user_notification_filter_empty # RUN global.user_notification_filter_empty_threaded ... # OK global.user_notification_filter_empty_threaded ok 47 global.user_notification_filter_empty_threaded # RUN global.user_notification_addfd ... # OK global.user_notification_addfd ok 48 global.user_notification_addfd # RUN global.user_notification_addfd_rlimit ... # OK global.user_notification_addfd_rlimit ok 49 global.user_notification_addfd_rlimit # RUN TRAP.dfl ... # OK TRAP.dfl ok 50 TRAP.dfl # RUN TRAP.ign ... # OK TRAP.ign ok 51 TRAP.ign # RUN TRAP.handler ... # OK TRAP.handler ok 52 TRAP.handler # RUN precedence.allow_ok ... # OK precedence.allow_ok ok 53 precedence.allow_ok # RUN precedence.kill_is_highest ... # OK precedence.kill_is_highest ok 54 precedence.kill_is_highest # RUN precedence.kill_is_highest_in_any_order ... # OK precedence.kill_is_highest_in_any_order ok 55 precedence.kill_is_highest_in_any_order # RUN precedence.trap_is_second ... # OK precedence.trap_is_second ok 56 precedence.trap_is_second # RUN precedence.trap_is_second_in_any_order ... # OK precedence.trap_is_second_in_any_order ok 57 precedence.trap_is_second_in_any_order # RUN precedence.errno_is_third ... # OK precedence.errno_is_third ok 58 precedence.errno_is_third # RUN precedence.errno_is_third_in_any_order ... # OK precedence.errno_is_third_in_any_order ok 59 precedence.errno_is_third_in_any_order # RUN precedence.trace_is_fourth ... # OK precedence.trace_is_fourth ok 60 precedence.trace_is_fourth # RUN precedence.trace_is_fourth_in_any_order ... # OK precedence.trace_is_fourth_in_any_order ok 61 precedence.trace_is_fourth_in_any_order # RUN precedence.log_is_fifth ... # OK precedence.log_is_fifth ok 62 precedence.log_is_fifth # RUN precedence.log_is_fifth_in_any_order ... # OK precedence.log_is_fifth_in_any_order ok 63 precedence.log_is_fifth_in_any_order # RUN TRACE_poke.read_has_side_effects ... # OK TRACE_poke.read_has_side_effects ok 64 TRACE_poke.read_has_side_effects # RUN TRACE_poke.getpid_runs_normally ... # OK TRACE_poke.getpid_runs_normally ok 65 TRACE_poke.getpid_runs_normally # RUN TRACE_syscall.ptrace.negative_ENOSYS ... # OK TRACE_syscall.ptrace.negative_ENOSYS ok 66 TRACE_syscall.ptrace.negative_ENOSYS # RUN TRACE_syscall.ptrace.syscall_allowed ... # OK TRACE_syscall.ptrace.syscall_allowed ok 67 TRACE_syscall.ptrace.syscall_allowed # RUN TRACE_syscall.ptrace.syscall_redirected ... # OK TRACE_syscall.ptrace.syscall_redirected ok 68 TRACE_syscall.ptrace.syscall_redirected # RUN TRACE_syscall.ptrace.syscall_errno ... # OK TRACE_syscall.ptrace.syscall_errno ok 69 TRACE_syscall.ptrace.syscall_errno # RUN TRACE_syscall.ptrace.syscall_faked ... # OK TRACE_syscall.ptrace.syscall_faked ok 70 TRACE_syscall.ptrace.syscall_faked # RUN TRACE_syscall.ptrace.skip_after ... # OK TRACE_syscall.ptrace.skip_after ok 71 TRACE_syscall.ptrace.skip_after # RUN TRACE_syscall.ptrace.kill_after ... # OK TRACE_syscall.ptrace.kill_after ok 72 TRACE_syscall.ptrace.kill_after # RUN TRACE_syscall.seccomp.negative_ENOSYS ... # OK TRACE_syscall.seccomp.negative_ENOSYS ok 73 TRACE_syscall.seccomp.negative_ENOSYS # RUN TRACE_syscall.seccomp.syscall_allowed ... # OK TRACE_syscall.seccomp.syscall_allowed ok 74 TRACE_syscall.seccomp.syscall_allowed # RUN TRACE_syscall.seccomp.syscall_redirected ... # OK TRACE_syscall.seccomp.syscall_redirected ok 75 TRACE_syscall.seccomp.syscall_redirected # RUN TRACE_syscall.seccomp.syscall_errno ... # OK TRACE_syscall.seccomp.syscall_errno ok 76 TRACE_syscall.seccomp.syscall_errno # RUN TRACE_syscall.seccomp.syscall_faked ... # OK TRACE_syscall.seccomp.syscall_faked ok 77 TRACE_syscall.seccomp.syscall_faked # RUN TRACE_syscall.seccomp.skip_after ... # OK TRACE_syscall.seccomp.skip_after ok 78 TRACE_syscall.seccomp.skip_after # RUN TRACE_syscall.seccomp.kill_after ... # OK TRACE_syscall.seccomp.kill_after ok 79 TRACE_syscall.seccomp.kill_after # RUN TSYNC.siblings_fail_prctl ... # OK TSYNC.siblings_fail_prctl ok 80 TSYNC.siblings_fail_prctl # RUN TSYNC.two_siblings_with_ancestor ... # OK TSYNC.two_siblings_with_ancestor ok 81 TSYNC.two_siblings_with_ancestor # RUN TSYNC.two_sibling_want_nnp ... # OK TSYNC.two_sibling_want_nnp ok 82 TSYNC.two_sibling_want_nnp # RUN TSYNC.two_siblings_with_no_filter ... # OK TSYNC.two_siblings_with_no_filter ok 83 TSYNC.two_siblings_with_no_filter # RUN TSYNC.two_siblings_with_one_divergence ... # OK TSYNC.two_siblings_with_one_divergence ok 84 TSYNC.two_siblings_with_one_divergence # RUN TSYNC.two_siblings_with_one_divergence_no_tid_in_err ... # OK TSYNC.two_siblings_with_one_divergence_no_tid_in_err ok 85 TSYNC.two_siblings_with_one_divergence_no_tid_in_err # RUN TSYNC.two_siblings_not_under_filter ... # OK TSYNC.two_siblings_not_under_filter ok 86 TSYNC.two_siblings_not_under_filter # PASSED: 86 / 86 tests passed. # Totals: pass:86 fail:0 xfail:0 xpass:0 skip:0 error:0
On Mon, Sep 14, 2020 at 10:15:18PM +1000, Michael Ellerman wrote: > Kees Cook <keescook@chromium.org> writes: > > Hi, > > > > This refactors the seccomp selftest macros used in change_syscall(), > > in an effort to remove special cases for mips, arm, arm64, and xtensa, > > which paves the way for powerpc fixes. > > > > I'm not entirely done testing, but all-arch build tests and x86_64 > > selftests pass. I'll be doing arm, arm64, and i386 selftests shortly, > > but I currently don't have an easy way to check xtensa, mips, nor > > powerpc. Any help there would be appreciated! > > The series builds fine for me, and all the tests pass (see below). > > Thanks for picking up those changes to deal with powerpc being oddball. > > Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Awesome; thanks! However... > > cheers > > > ./seccomp_bpf > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > # RUN global.kcmp ... > # OK global.kcmp > ok 1 global.kcmp > [...] > # RUN global.KILL_thread ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. Was this a mis-paste, or has something very very bad happened here in global.KILL_one_arg_six finishes? > # RUN global.kcmp ... > # OK global.kcmp > ok 1 global.kcmp > [...] > # RUN global.user_notification_basic ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_basic ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_signal ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_closed_listener ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_child_pid_ns ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_sibling_pid_ns ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_sibling_pid_ns ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_sibling_pid_ns ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_fault_recv ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_continue ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_filter_empty ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_filter_empty_threaded ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_addfd ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # RUN global.user_notification_addfd_rlimit ... > TAP version 13 > 1..86 > # Starting 86 tests from 7 test cases. > [...] > # PASSED: 86 / 86 tests passed. > # Totals: pass:86 fail:0 xfail:0 xpass:0 skip:0 error:0 And after every user_notification test? O_O
Hello, On Sat, Sep 12, 2020 at 4:08 AM Kees Cook <keescook@chromium.org> wrote: > This refactors the seccomp selftest macros used in change_syscall(), > in an effort to remove special cases for mips, arm, arm64, and xtensa, > which paves the way for powerpc fixes. > > I'm not entirely done testing, but all-arch build tests and x86_64 > selftests pass. I'll be doing arm, arm64, and i386 selftests shortly, > but I currently don't have an easy way to check xtensa, mips, nor > powerpc. Any help there would be appreciated! I've built and tested this series on xtensa. I had to disable two tests: user_notification_addfd and user_notification_addfd_rlimit because they use memfd_create and prlimit which are not available in uClibc. With this change I've got all 86 tests passing with the following log: ./seccomp_bpf TAP version 13 1..86 # Starting 86 tests from 7 test cases. # RUN TRAP.dfl ... # OK TRAP.dfl ok 1 TRAP.dfl # RUN TRAP.ign ... # OK TRAP.ign ok 2 TRAP.ign # RUN TRAP.handler ... # OK TRAP.handler ok 3 TRAP.handler # RUN precedence.allow_ok ... # OK precedence.allow_ok ok 4 precedence.allow_ok # RUN precedence.kill_is_highest ... # OK precedence.kill_is_highest ok 5 precedence.kill_is_highest # RUN precedence.kill_is_highest_in_any_order ... # OK precedence.kill_is_highest_in_any_order ok 6 precedence.kill_is_highest_in_any_order # RUN precedence.trap_is_second ... # OK precedence.trap_is_second ok 7 precedence.trap_is_second # RUN precedence.trap_is_second_in_any_order ... # OK precedence.trap_is_second_in_any_order ok 8 precedence.trap_is_second_in_any_order # RUN precedence.errno_is_third ... # OK precedence.errno_is_third ok 9 precedence.errno_is_third # RUN precedence.errno_is_third_in_any_order ... # OK precedence.errno_is_third_in_any_order ok 10 precedence.errno_is_third_in_any_order # RUN precedence.trace_is_fourth ... # OK precedence.trace_is_fourth ok 11 precedence.trace_is_fourth # RUN precedence.trace_is_fourth_in_any_order ... # OK precedence.trace_is_fourth_in_any_order ok 12 precedence.trace_is_fourth_in_any_order # RUN precedence.log_is_fifth ... # OK precedence.log_is_fifth ok 13 precedence.log_is_fifth # RUN precedence.log_is_fifth_in_any_order ... # OK precedence.log_is_fifth_in_any_order ok 14 precedence.log_is_fifth_in_any_order # RUN TRACE_poke.read_has_side_effects ... # OK TRACE_poke.read_has_side_effects ok 15 TRACE_poke.read_has_side_effects # RUN TRACE_poke.getpid_runs_normally ... # OK TRACE_poke.getpid_runs_normally ok 16 TRACE_poke.getpid_runs_normally # RUN TRACE_syscall.ptrace.negative_ENOSYS ... # OK TRACE_syscall.ptrace.negative_ENOSYS ok 17 TRACE_syscall.ptrace.negative_ENOSYS # RUN TRACE_syscall.ptrace.syscall_allowed ... # OK TRACE_syscall.ptrace.syscall_allowed ok 18 TRACE_syscall.ptrace.syscall_allowed # RUN TRACE_syscall.ptrace.syscall_redirected ... # OK TRACE_syscall.ptrace.syscall_redirected ok 19 TRACE_syscall.ptrace.syscall_redirected # RUN TRACE_syscall.ptrace.syscall_errno ... # OK TRACE_syscall.ptrace.syscall_errno ok 20 TRACE_syscall.ptrace.syscall_errno # RUN TRACE_syscall.ptrace.syscall_faked ... # OK TRACE_syscall.ptrace.syscall_faked ok 21 TRACE_syscall.ptrace.syscall_faked # RUN TRACE_syscall.ptrace.skip_after ... # OK TRACE_syscall.ptrace.skip_after ok 22 TRACE_syscall.ptrace.skip_after # RUN TRACE_syscall.ptrace.kill_after ... # OK TRACE_syscall.ptrace.kill_after ok 23 TRACE_syscall.ptrace.kill_after # RUN TRACE_syscall.seccomp.negative_ENOSYS ... # OK TRACE_syscall.seccomp.negative_ENOSYS ok 24 TRACE_syscall.seccomp.negative_ENOSYS # RUN TRACE_syscall.seccomp.syscall_allowed ... # OK TRACE_syscall.seccomp.syscall_allowed ok 25 TRACE_syscall.seccomp.syscall_allowed # RUN TRACE_syscall.seccomp.syscall_redirected ... # OK TRACE_syscall.seccomp.syscall_redirected ok 26 TRACE_syscall.seccomp.syscall_redirected # RUN TRACE_syscall.seccomp.syscall_errno ... # OK TRACE_syscall.seccomp.syscall_errno ok 27 TRACE_syscall.seccomp.syscall_errno # RUN TRACE_syscall.seccomp.syscall_faked ... # OK TRACE_syscall.seccomp.syscall_faked ok 28 TRACE_syscall.seccomp.syscall_faked # RUN TRACE_syscall.seccomp.skip_after ... # OK TRACE_syscall.seccomp.skip_after ok 29 TRACE_syscall.seccomp.skip_after # RUN TRACE_syscall.seccomp.kill_after ... # OK TRACE_syscall.seccomp.kill_after ok 30 TRACE_syscall.seccomp.kill_after # RUN TSYNC.siblings_fail_prctl ... # OK TSYNC.siblings_fail_prctl ok 31 TSYNC.siblings_fail_prctl # RUN TSYNC.two_siblings_with_ancestor ... # OK TSYNC.two_siblings_with_ancestor ok 32 TSYNC.two_siblings_with_ancestor # RUN TSYNC.two_sibling_want_nnp ... # OK TSYNC.two_sibling_want_nnp ok 33 TSYNC.two_sibling_want_nnp # RUN TSYNC.two_siblings_with_no_filter ... # OK TSYNC.two_siblings_with_no_filter ok 34 TSYNC.two_siblings_with_no_filter # RUN TSYNC.two_siblings_with_one_divergence ... # OK TSYNC.two_siblings_with_one_divergence ok 35 TSYNC.two_siblings_with_one_divergence # RUN TSYNC.two_siblings_with_one_divergence_no_tid_in_err ... # OK TSYNC.two_siblings_with_one_divergence_no_tid_in_err ok 36 TSYNC.two_siblings_with_one_divergence_no_tid_in_err # RUN TSYNC.two_siblings_not_under_filter ... # OK TSYNC.two_siblings_not_under_filter ok 37 TSYNC.two_siblings_not_under_filter # RUN global.kcmp ... # OK global.kcmp ok 38 global.kcmp # RUN global.mode_strict_support ... # OK global.mode_strict_support ok 39 global.mode_strict_support # RUN global.mode_strict_cannot_call_prctl ... # OK global.mode_strict_cannot_call_prctl ok 40 global.mode_strict_cannot_call_prctl # RUN global.no_new_privs_support ... # OK global.no_new_privs_support ok 41 global.no_new_privs_support # RUN global.mode_filter_support ... # OK global.mode_filter_support ok 42 global.mode_filter_support # RUN global.mode_filter_without_nnp ... # OK global.mode_filter_without_nnp ok 43 global.mode_filter_without_nnp # RUN global.filter_size_limits ... # OK global.filter_size_limits ok 44 global.filter_size_limits # RUN global.filter_chain_limits ... # OK global.filter_chain_limits ok 45 global.filter_chain_limits # RUN global.mode_filter_cannot_move_to_strict ... # OK global.mode_filter_cannot_move_to_strict ok 46 global.mode_filter_cannot_move_to_strict # RUN global.mode_filter_get_seccomp ... # OK global.mode_filter_get_seccomp ok 47 global.mode_filter_get_seccomp # RUN global.ALLOW_all ... # OK global.ALLOW_all ok 48 global.ALLOW_all # RUN global.empty_prog ... # OK global.empty_prog ok 49 global.empty_prog # RUN global.log_all ... # OK global.log_all ok 50 global.log_all # RUN global.unknown_ret_is_kill_inside ... # OK global.unknown_ret_is_kill_inside ok 51 global.unknown_ret_is_kill_inside # RUN global.unknown_ret_is_kill_above_allow ... # OK global.unknown_ret_is_kill_above_allow ok 52 global.unknown_ret_is_kill_above_allow # RUN global.KILL_all ... # OK global.KILL_all ok 53 global.KILL_all # RUN global.KILL_one ... # OK global.KILL_one ok 54 global.KILL_one # RUN global.KILL_one_arg_one ... # OK global.KILL_one_arg_one ok 55 global.KILL_one_arg_one # RUN global.KILL_one_arg_six ... # OK global.KILL_one_arg_six ok 56 global.KILL_one_arg_six # RUN global.KILL_thread ... # OK global.KILL_thread ok 57 global.KILL_thread # RUN global.KILL_process ... # OK global.KILL_process ok 58 global.KILL_process # RUN global.arg_out_of_range ... # OK global.arg_out_of_range ok 59 global.arg_out_of_range # RUN global.ERRNO_valid ... # OK global.ERRNO_valid ok 60 global.ERRNO_valid # RUN global.ERRNO_zero ... # OK global.ERRNO_zero ok 61 global.ERRNO_zero # RUN global.ERRNO_capped ... # OK global.ERRNO_capped ok 62 global.ERRNO_capped # RUN global.ERRNO_order ... # OK global.ERRNO_order ok 63 global.ERRNO_order # RUN global.negative_ENOSYS ... # OK global.negative_ENOSYS ok 64 global.negative_ENOSYS # RUN global.seccomp_syscall ... # OK global.seccomp_syscall ok 65 global.seccomp_syscall # RUN global.seccomp_syscall_mode_lock ... # OK global.seccomp_syscall_mode_lock ok 66 global.seccomp_syscall_mode_lock # RUN global.detect_seccomp_filter_flags ... # OK global.detect_seccomp_filter_flags ok 67 global.detect_seccomp_filter_flags # RUN global.TSYNC_first ... # OK global.TSYNC_first ok 68 global.TSYNC_first # RUN global.syscall_restart ... # OK global.syscall_restart ok 69 global.syscall_restart # RUN global.filter_flag_log ... # OK global.filter_flag_log ok 70 global.filter_flag_log # RUN global.get_action_avail ... # OK global.get_action_avail ok 71 global.get_action_avail # RUN global.get_metadata ... # OK global.get_metadata ok 72 global.get_metadata # RUN global.user_notification_basic ... # OK global.user_notification_basic ok 73 global.user_notification_basic # RUN global.user_notification_with_tsync ... # OK global.user_notification_with_tsync ok 74 global.user_notification_with_tsync # RUN global.user_notification_kill_in_middle ... # OK global.user_notification_kill_in_middle ok 75 global.user_notification_kill_in_middle # RUN global.user_notification_signal ... # OK global.user_notification_signal ok 76 global.user_notification_signal # RUN global.user_notification_closed_listener ... # OK global.user_notification_closed_listener ok 77 global.user_notification_closed_listener # RUN global.user_notification_child_pid_ns ... # OK global.user_notification_child_pid_ns ok 78 global.user_notification_child_pid_ns # RUN global.user_notification_sibling_pid_ns ... # OK global.user_notification_sibling_pid_ns ok 79 global.user_notification_sibling_pid_ns # RUN global.user_notification_fault_recv ... # OK global.user_notification_fault_recv ok 80 global.user_notification_fault_recv # RUN global.seccomp_get_notif_sizes ... # OK global.seccomp_get_notif_sizes ok 81 global.seccomp_get_notif_sizes # RUN global.user_notification_continue ... # OK global.user_notification_continue ok 82 global.user_notification_continue # RUN global.user_notification_filter_empty ... # OK global.user_notification_filter_empty ok 83 global.user_notification_filter_empty # RUN global.user_notification_filter_empty_threaded ... # OK global.user_notification_filter_empty_threaded ok 84 global.user_notification_filter_empty_threaded # RUN global.user_notification_addfd ... # OK global.user_notification_addfd ok 85 global.user_notification_addfd # RUN global.user_notification_addfd_rlimit ... # OK global.user_notification_addfd_rlimit ok 86 global.user_notification_addfd_rlimit # PASSED: 86 / 86 tests passed. # Totals: pass:86 fail:0 xfail:0 xpass:0 skip:0 error:0
On Mon, Sep 14, 2020 at 1:32 PM Kees Cook <keescook@chromium.org> wrote: > On Mon, Sep 14, 2020 at 10:15:18PM +1000, Michael Ellerman wrote: > > Kees Cook <keescook@chromium.org> writes: > However... > > > > > cheers > > > > > > ./seccomp_bpf > > TAP version 13 > > 1..86 > > # Starting 86 tests from 7 test cases. > > # RUN global.kcmp ... > > # OK global.kcmp > > ok 1 global.kcmp > > [...] > > # RUN global.KILL_thread ... > > TAP version 13 > > 1..86 > > # Starting 86 tests from 7 test cases. > > Was this a mis-paste, or has something very very bad happened here in > global.KILL_one_arg_six finishes? I observe similar output corruption on xtensa when I redirect test output into a file or pipe it to 'cat'. When it goes to the terminal it looks normal.
Kees Cook <keescook@chromium.org> writes: > On Mon, Sep 14, 2020 at 10:15:18PM +1000, Michael Ellerman wrote: >> Kees Cook <keescook@chromium.org> writes: >> > Hi, >> > >> > This refactors the seccomp selftest macros used in change_syscall(), >> > in an effort to remove special cases for mips, arm, arm64, and xtensa, >> > which paves the way for powerpc fixes. >> > >> > I'm not entirely done testing, but all-arch build tests and x86_64 >> > selftests pass. I'll be doing arm, arm64, and i386 selftests shortly, >> > but I currently don't have an easy way to check xtensa, mips, nor >> > powerpc. Any help there would be appreciated! >> >> The series builds fine for me, and all the tests pass (see below). >> >> Thanks for picking up those changes to deal with powerpc being oddball. >> >> Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) > > Awesome; thanks! > > However... > >> ./seccomp_bpf >> TAP version 13 >> 1..86 >> # Starting 86 tests from 7 test cases. >> # RUN global.kcmp ... >> # OK global.kcmp >> ok 1 global.kcmp >> [...] >> # RUN global.KILL_thread ... >> TAP version 13 >> 1..86 >> # Starting 86 tests from 7 test cases. > > Was this a mis-paste, or has something very very bad happened here in > global.KILL_one_arg_six finishes? > ... >> TAP version 13 >> 1..86 >> # Starting 86 tests from 7 test cases. >> [...] >> # PASSED: 86 / 86 tests passed. >> # Totals: pass:86 fail:0 xfail:0 xpass:0 skip:0 error:0 > > And after every user_notification test? O_O Haha, I thought that was normal :) It's because of redirection, I run the tests with: find . -executable -type f -print -execdir '{}' ';' | tee test.log If I just run it directly on the terminal everything is normal. It'll be fork() vs libc buffering. I can fix it with: $ stdbuf -oL ./seccomp_bpf | tee test.log Or the patch below. I can send a proper patch for that tomorrow, I don't know that harness code, but I think that's the right fix. cheers diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 4f78e4805633..b1bd00ff3d94 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -971,6 +971,7 @@ void __run_test(struct __fixture_metadata *f, ksft_print_msg(" RUN %s%s%s.%s ...\n", f->name, variant->name[0] ? "." : "", variant->name, t->name); + fflush(stdout); t->pid = fork(); if (t->pid < 0) { ksft_print_msg("ERROR SPAWNING TEST CHILD\n");
Hi, This refactors the seccomp selftest macros used in change_syscall(), in an effort to remove special cases for mips, arm, arm64, and xtensa, which paves the way for powerpc fixes. I'm not entirely done testing, but all-arch build tests and x86_64 selftests pass. I'll be doing arm, arm64, and i386 selftests shortly, but I currently don't have an easy way to check xtensa, mips, nor powerpc. Any help there would be appreciated! (FWIW, I expect to take these via the seccomp tree.) Thanks, -Kees Kees Cook (15): selftests/seccomp: Refactor arch register macros to avoid xtensa special case selftests/seccomp: Provide generic syscall setting macro selftests/seccomp: mips: Define SYSCALL_NUM_SET macro selftests/seccomp: arm: Define SYSCALL_NUM_SET macro selftests/seccomp: arm64: Define SYSCALL_NUM_SET macro selftests/seccomp: mips: Remove O32-specific macro selftests/seccomp: Remove syscall setting #ifdefs selftests/seccomp: Convert HAVE_GETREG into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Convert REGSET calls into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Avoid redundant register flushes selftests/seccomp: Remove SYSCALL_NUM_RET_SHARE_REG in favor of SYSCALL_RET_SET selftests/seccomp: powerpc: Fix seccomp return value testing selftests/seccomp: powerpc: Set syscall return during ptrace syscall exit selftests/clone3: Avoid OS-defined clone_args selftests/seccomp: Use __NR_mknodat instead of __NR_mknod .../selftests/clone3/clone3_selftests.h | 16 +- tools/testing/selftests/seccomp/seccomp_bpf.c | 313 ++++++++++-------- 2 files changed, 184 insertions(+), 145 deletions(-)